Valves with handwheel

... pipeline applications. Gate valves are linear motion devices used open and close the flow of the fluid (shutoff valve). Gate valves cannot be used for throttling applications, i.e. to regulate the flow ...

DN: 89 mm - 300 mm
Pressure: 300 psi
Temperature: -10 °C - 160 °C

... BS EN1092-2 PN16 or GB/9113.1 4.Epoxy resin coating both inside & outside the body 5.It could also be operated by the handwheel ...

... that has clumped together in storage, dust formation, ensuring exact/calibrated quantities etc. Product range ■Flat slide valves ■Chutes ■2-way switches Properties/variants Applications For flowing or pourable bulk materials Configurations ...

DN: 15 mm - 100 mm
Pressure: 6 bar - 10 bar
Temperature: -30 °C - 120 °C

... Material sealing element (in contact with medium): EPDM | FPM reliable and economical good control characteristics high kv value visual position indicator ...

DN: 0.5 in - 6 in
Pressure: 16 bar
Temperature: -46 °C - 400 °C

... series is a line of ball valves manufactured by Penta. It offers an efficient solution for high-temperature fluid handling with reliability and capability. The ball valves are also produced with quality, based on Alfa ...

DN: 25 mm - 100 mm
Pressure: 16 bar
Temperature: 0 °C - 110 °C

... protected against water hammer flange connection without drain port (drain valve cannot be added) spindle thread not in contact with medium with a black handwheel free from dead spots Open ...

DN: 25 mm - 150 mm
Pressure: 16, 10 bar
Temperature: 300 °C

... •The rising opening system breaks the sediment or crystallized layer on the bottom of the tank. •Mechanized in high alloy stainless steel. Specifications •Quality: ASTM A.351 Gr. CF8M (316). •Closing: Metal - Metal. •Control: Hand by wheel. •Stem ...

DN: 80 mm - 125 mm
Pressure: 16 bar

... STANDARDS OF MANUFACTURE EN 1171 (ISO 1083) DUCTILE IRON GATE VALVES EN 1074-2 ISOLATING VALVES EN 1092-2 (ISO 7005-2) DRILLING FLANGES MATERIALS BODY FIG.11-12-13 – CAST IRON EN GJL-250 EN 1561 FIG.11S-12S-13S ...

DN: 15 mm - 300 mm
Pressure: 16 bar - 250 bar
Temperature: -50 °C - 130 °C

... more quite than a traditional globe valve. N20 valves are available with an open window cage (for plug balancing purposes only), single, double or a triple cage (for low noise purposes only) Valve body Type: ...

DN: 0.25, 0.375, 0.5, 0.75 in
Pressure: 0 bar - 350 bar
Temperature: -20 °C - 130 °C

... made out of AISI 316 Stainless Steel and a needle made out of X 10 Cr Ni S 1809. It has a PTFE antiextrusion ring and a handwheel made out of GD Al SI 12. It also has a working temperature range of -20ºC to +130ºC. ...

DN: 15 mm - 900 mm
Pressure: 1,600,000 Pa - 42,000,000 Pa
Temperature: -196 °C - 380 °C

... Ball Valve Body materials: carbon steel, stainless steel, alloy steel WCB, LCB, CF3, CF3M, CF8, CF8M, MONEL, and more. Valve Ball type: floating ball, trunnion mounted ball. Valve Manufacturing standards: ...

DN: 2 in - 12 in
Pressure: 150 psi

... JOINT END: FLANGE (ANSI /DIN / JIS/ CNS) WORKING PRESSURE: 150PSI Key words: CPVC turbine butterfly valve ...

DN: 15 mm - 800 mm
Pressure: 20 bar - 420 bar
Temperature: -50 °C - 200 °C

... Side Entry Valves suitable for Oil & Gas production, processing, transportation, distribution, chemical and petrochemical refining including system isolation, pressure level and flow measurement, instrument drain, chemical injection ...

DN: 150 mm - 610 mm
Temperature: 80 °C

... series of deflectors and retainers to reduce wear and extend service life Removable bonnet cover for easy inspection of valve body Displacement pocket prevents wedging and packing into an end seal Optional return pan redirects ...

DN: 50 mm - 300 mm
Pressure: 20 bar
Temperature: -29 °C - 425 °C

... steel body & bonnet -TRIM 8 - A410 + stellite Gr. 6 seat - Bolted bonnet & gland pack - Rising stem & non rising handwheel for gate & globe valves - PS: 20 bar (ANSI 150), 50 bar (ANSI 300) - TS: -29°C/+425°C. SKU MXT-1850143 Body ...

DN: 1.25 in - 24 in
Temperature: -10 °C - 110 °C

Ductile Iron Wafer butterfly valveDiameters from DN032 - 1¼" to DN600 - 24"For EN1092 PN16 flanges (also PN10 for DN≤150)Lengths according to EN558-1 series 20 (ex DIN3202 K1)Design according to EN593Testing according to EN12266-1Epoxy coating (min. 150 ...

DN: 0.5 in - 40 in

... Cryogenic Cast Steel Ball Valve Supplier: Cast Carbon, Stainless Steel Ball Valves, 1/2-40 Inch, 150-2500 LB, API 6D, BS 5351, ASME B16.34, DIN 3202. Cryogenic ball valves are available in types of ...

DN: 15 mm - 50 mm
Pressure: 40 bar
Temperature: 196 °C

... Nitrogen - Oxygen - Argon MATERIALS: Body: AISI 304 L/A 351 CF3 Stem-Extention: AISI 304 / Brass Disc: Brass or AISI 304 Disc-Gasket: PTFE ...

DN: 15 mm - 250 mm
Pressure: 16 bar - 420 bar
Temperature: -101 °C - 350 °C

... unstable factor, the trunnion ball valve downstream seat will be pushed by un-normal pressure, and the release the un-normally pressure automatically, it doesn’t damage to the sealing of upstream seat. 9) The valve ...

DN: 15 mm - 200 mm
Pressure: 40 bar

... Bolted yoke bonnet. • Rising stem and handwheel. • Stainless steel or PTFE sealings. • Distance between sides according to DIN 3202 F-1. ...

DN: 50 mm - 700 mm
Pressure: 4, 2, 10, 7 bar
Temperature: 70, 120 °C

... industry - other inert fluids Assembly: Assembly from horizontal to vertical position. During assembling the gate valve between flanges remember to get tight the packing gland. ...

DN: 25 mm - 200 mm
Pressure: 400,000 Pa - 600,000 Pa
Temperature: -40 °C - 120 °C

... Cost-effective valve with throttling performance Backflow Prevention. ...

DN: 0.25 in - 4 in
Pressure: 0 bar - 255 bar
Temperature: -269 °C - 230 °C

... Benefits Redfluid needle valves are designed to offer high performance. The closing by mobile obturation makes both the opening and the closing of the valve smooth, avoiding the seizure of the sealing seat. 100% ...

... TG001 American Standard Large Diameter Forged Ball Valve ...

DN: 1 in - 36 in
Temperature: 1,200 °C