DN: 1.813 in - 7.063 in
Pressure: 15,000, 10,000 psi
... next project, Cameron frac valves provide three times more uptime compared with other suppliers, minimizing NPT and related costs. Choose the gate valve that best suits your fracturing program Designed as a manual ...
CAMERON
DN: 15 mm - 250 mm
Pressure: 23.8 bar - 40 bar
Temperature: -10 °C - 400 °C
... on request), manual handwheel control, flanged connections according to EN1092-1 PN 40 with prominence. Streamlined flow valves, Streamlined flow valves bellows type, Streamlined flow valves ...
Mival
DN: 65 mm - 250 mm
Pressure: 10 bar
Temperature: 0 °C - 120 °C
... Only sleeve gasket and disc in touch with medium Double sealed shaft Integrated bracket for fix point mounting Variable locking positions 90° ±5° adjustable Fixed position of the disc due to self-locking gear mechanism Smooth running of gear wheel ...
Praher Plastics Austria GmbH
DN: 25 mm - 1,200 mm
Pressure: 10 bar - 100 bar
... valve needs to be used often the manual mechanism of the valve will be replaced with an actuator and as such it instead classifies as a shut-off- valve. SEVERAL VALVES WORK MANUALLY ...
SOMAS
DN: 50 mm
Pressure: 10 bar
Temperature: -20 °C
... This sampling valve has one 2.5” Tri-Clamp (TC) near the handwheel (Fig. 1). It is called easy-clean because the piston can be removed from the valve housing with minimal effort (Fig. 2), allowing full ...
FAMAT
DN: 50 mm - 600 mm
Pressure: 16, 10 bar
Temperature: 100 °C
... Resilient-seated, lug-type butterfly valve for flange mounting to pipelines; disk with centric bearing; suitable for use in sea water applications. With replaceable liner mounted on a vulcanised seal carrier ring, and disk with triple ...
VAG-Group
DN: 40 mm - 500 mm
Temperature: 260 °C
... Two and three piece full or reduced bore trunnion design ball valves. • R43 full bore • R44 reduced bore Ideally suited for pipeline installations, gas production, pressure regulating and metering stations, FVO/LVO and platform duties, ...
Pentair Valves & Controls
... DN 80 - 600 PN 10 - 16 Body: EN-JS1030 Coating: Epoxy, Enamel, Rubber lining, Epoxy-Polymer-Ceramic (EPC) Further development with numerous innovative details. Robust design, variable drive technology, suitable for any installation situation, variant ...
ERHARD
DN: 50 mm - 400 mm
Flow rate: 3,000 m³/h
... - ports can be configurd to suite installation Simplified set up and maintenance - hand wheel allows manual adjustment of valve (optional on pneumatic valve) ...
Pressure: 0 bar - 1,000 bar
Flow rate: 0 l/min - 75 l/min
... pass through the valve without pressure (manual bypass function). Application range for operating pressures of up to 1,000 bar. TECHNICAL SPECIFICATION Dimensions: 479xØ125 mm Weight: 7.3-8.2 kg SPECIFIC FEATURES Overflow ...
... products specially thought for the most exigent industrial applications: The Extreme Series, with Ball valves, Butterfly valves and Diaphragm valves in different plastic materials (PVC-U, CPVC, PP-H, ...
Pressure: 10 bar
Temperature: 135 °C
... Aseptomag® single-seat sampling valves are used for the safe sampling in UltraClean and Aseptic processing plants. When not actuated, the internal assembly seals the valve seat in a leakage-free manner and thus enables ...
DN: 50 mm - 1,000 mm
Pressure: 10 bar
Temperature: -40 °C - 200 °C
... Features •Double action, maintenance-free and self-adjusting top and bottom stem sealing - wide variety of discs / body combinations possible •Durable due to optimum material combination PTFE lining and PFA disc •Maximum reliability due to triple ...
Richter Chemie Technik
DN: 50 mm - 600 mm
Pressure: 1, 1.6 MPa
Temperature: 425, 80 °C
... Syrup, Pulp, Sewage, Coal SIurry Ash Slag Water Mixture Material of Major Parts and Components Body and cover -Stainless Steel, -carbon steel Flashboard -Stainless steel, -carbon steel Stem -Stainless steel - - Sealing surface -Rubber. ...
DN: 15 mm - 100 mm
Pressure: 0 bar - 10 bar
Temperature: 95, 150 °C
... Type 987 is a manually operated valve. This valve with non rising handwheel has a robust design which allows higher temperatures applications. It eliminates water hammer and allows the flow in both direction. ...
DN: 100 mm - 2,000 mm
Pressure: 10 bar - 40 bar
Temperature: 80 °C
... Body material Ductile iron Disc material Ductile iron PN (End) PN40 End Flanged Contact sealing EPDM Operating system Manual gear box ...
TECOFI
DN: 50 mm - 300 mm
Pressure: 16 bar
Temperature: -10 °C - 110 °C
... The stainless steel butterfly valve engineered by Sferaco features an aluminum IP 65 Gearbox. This gearbox has a position indicator and locking device in steel chain for DN 250 and DN 300. The wafer type valve has ...
SFERACO
DN: 0 mm - 10,000 mm
Pressure: 6 bar - 64 bar
... b>AVAILABLE VERSIONS
- Standard wafer valve
- Wafer valve with gearbox/box
- Motorized wafer valve with gearbox/box
- Motorized wafer valve with gearbox/box
DN: 40 mm - 1,600 mm
Pressure: 2.5 bar - 100 bar
Temperature: -10 °C - 200 °C
... the request of customers . The gate valve body is made of cast steel and it is suitably dimensioned to assure a high safety factor. The thicknesses are always higher than the mini-mum ones established for GATE VALVE ...
DI NICOLA INFINAM
DN: 0.25 in - 2 in
Pressure: 220, 210 bar
Temperature: 260, 240, 200 °C
... TECHNICAL INFORMATION1. Needle valve2. Made of Stainless steel ASTM A182 F3163. Threaded ends according EN 10226-1 (EX ISO 7-1 e DIN 2999) gas4. Stem Packing PTFE + Graphite5. Max. Working pressure 3000 Lbs.6. Pressure / Temperature Range:1/4” ...
DN: 50 mm - 600 mm
Pressure: 16, 10 bar
... characteristics are essential for gate valves. We have therefore incorporated our many years of experience into developing our E3 gate valves to give them the finishing "Made for Generations" touch. The result: Hawle ...
Hawle
DN: 2 in - 24 in
Pressure: 16 bar - 250 bar
... entry ball valves are used in piping systems where the top of the valve can be removed to gain access to the ball and seats without removing the entire valve from the piping system. Typically made from ...
Athena Engineering S.r.l.
DN: 1, 0.5 in
Temperature: -20 °C - 350 °C
... * In strict accordance with the standard of GB, JB, JIS, ANSI, KS, BS, DIN, API and etc. * Certification: ISO9001, BSCI, CE, ROHS, FCC, FDA etc ...
Yongkang Yonlin Industry & Trade Co.,Ltd Yongkang Lianggong Valve Co., Ltd.
DN: 0.5 in - 6 in
Pressure: 10 MPa - 76 MPa
Temperature: -29 °C - 593 °C
... standard: ASME B16.34 Valve body material: WB36/A105/F22 Flow characteristics: E%/L Leakage level: ANCI FCI-02 V Product Features 1. - Good valve core stability. The sturdy and durable guide cylinder provides ...
Suzhou Delan Energy Science & Technology Co.,Ltd
DN: 2 in - 24 in
... Flapcon BA302-T Series ball valves are designed manufactured to provide maximum service life and dependability. All ball valves are full ported and meet the design requirements of American Petroleum Institute standard ...
FLAPCON VALVES AND AUTOMATION SYSTEMS CO LTD
DN: 5 in - 72 in
Pressure: 150 psi - 450 psi
Temperature: 150 °C
... DeZURIK Eccentric Plug Valves' design features include eccentric action and resilient plug facings assure lasting dead-tight shutoff. Clean interior design and straight-through flow allow high maximum flow capacity with minimum pressure ...
DeZURIK
... Overview CRANE® bronze angle valves have stood up to commercial and industrial services for more than a century. ...
Crane Process Flow Technologies GmbH
DN: 40 mm - 600 mm
Pressure: 10, 16 bar
... OS&Y gate valves F4-F5 DN40-500 Outside Screw & Yoke Gate valve DN: 40-600 PN: 10/16 Face to face: F4 and F5 Body: GGG-50 Bonnet: GGG-50 Wedge: EPDM/NBR Stem: AISI-420 Visual position indicator ...
Belgicast
DN: 25 mm - 150 mm
... search of MNC Flush Bottom Ball Valves? If your answer is yes, then you are at right place. Our company is recognized as one of the trusted Manufacturers, Exporters and Suppliers of Flush Bottom Ball Valves in India. ...
Marck And Care Engineers Ltd.
DN: 40, 300 mm
Pressure: 10 bar
Temperature: -10 °C - 150 °C
... Cast iron (GJL 250) PN 10 gate valve flat body inside screw stainless steel (AISI 304) trim 150°C (max) Main characteristics • Manufactured in Italy in accordance with EN 1171 • Face-to-face length according to EN 558-1, basic series ...
MARAN E PERACINI
Pressure: 2,500 Pa
Temperature: 0 °C - 90 °C
... GATE VALVES Size:1/2‘’-4‘’ [Technical Specification] Material Normal Brass; CW617N;DZR Working Pressure PN25 Application Water Working Temperature 0℃-90℃ ...
Zhejiang Italy Copper Company
DN: 15 mm - 100 mm
Pressure: 16 bar
Temperature: 120 °C
... Brass gate valve Novo • - Non rising stem, solid wedge, screwed ends • - Used for water, petroleum • - Green color handwheel • - BS 21 / ISO 228-1-2000 threads standard • - Max working pressure: 16 bar ~ 16 kg/cm² • ...
DN: 1 in - 2.5 in
... TECVAL Boiler Blowdown Valves blow down sludge formed in steam boilers. Devices in grey iron or steel, sizes range from 1" to 21/2", threaded or flanged, with a quick, slow, or automatic opening mechanism. ...
DN: 200 mm - 1,800 mm
Pressure: 16 bar - 31 bar
Temperature: -10 °C - 50 °C
... RAPHAEL’s new double eccentric butterfly valve represents the essence of an efficient butterfly valve designed for when economy is a high priority. BTF-E is functional and reliable, providing reduced complexity. It ...
DN: 400 mm - 2,000 mm
... It mainly serves to adjust or stop the waste water level inside the channel. Turning the handwheel placed on the upper part of the penstock to the right or to the left, the shield of the penstock rises or lowers, changing in this way ...
DN: 0.5 in
Pressure: 320 bar
Temperature: -196 °C - 400 °C
... steel stop valves are made of stainless steel and the acid-resistant valves are made of acid-resistant steel, with the exception of the tempered stainless steel needle. Corrosion-prone parts have suitable protective coatings. ...
DN: 0.5 in - 4 in
Pressure: 16 bar
... attached to it closes or opens the passage hole in the housing. WARNING: The use of shut-off valves as control valves is prohibited. ...
SIMPLE VALVE, S.L.
DN: 50 mm - 6,000 mm
Pressure: 16, 6, 10 bar
Temperature: -40 °C - 200 °C
... • Construction: ISO5752 API 609 GB12221 • Design standard: GB12238 • Inspection standard: 1)Density: 1.1xPN 2) Body bearing pressure:1.5x PN • Suitable flanged: ANSI CLASS 125/150 JIS 5/10k ...
ROPO GmbH
DN: 15 mm - 50 mm
Pressure: 10 bar
Temperature: 0 °C - 60 °C
... angle seat valve is a shutting-off and regulating valve particularly suitable for clean fluids. Technical features: Solvent welded metric sockets Can be installed in any position No metal parts in contact ...
Effast
DN: 50 mm - 1,200 mm
Pressure: 6, 16, 25 bar
... The EX model knife gate is a uni-directional wafer valve designed for general industrial service applications. The design of the body and seat assures non-clogging shutoff on suspended solids in industries such as: Pulp and Paper ...
ORBINOX
the best suppliers