|
|
Ultra® TT dispensing robots are a cost-effective way to increase throughput and quality by automating repetitive fluid dispensing processes.
These compact tabletop units can be used with all EFD cocks and industrial syringe barrels, and combine precise positioning and dispensing functions in a space-saving footprint.
The Ultra TT industrial robots are available with 325mm x 325mm or 525mm x 525mm work envelopes. Closed-loop servo controls provide fast, accurate positioning of the dispense tip, while the integrated time and pressure controls control the operation of the valve or syringe barrel. |
|
Function Cartesian robotic mono-axes, 2 or 3 axes according to your schedule of conditions, with:
- Mechanical System
- Motorization
- Control of axis
- Multiple accessories
Function Industrial manipulator, with:
- Mechanical System
- Motorization
- Control of axis
- Multiple accessories |
|
Realized starting from the range of the axes max, our experiment and our know-how, allow to answer your requests within the multiaxis framework of application.
We deal with:
·Studies mechanics and electric following schedules of conditions
·Integration complete and personalized according to your requests
|
|
Master series (for Injection Moulding Machines from 50 up to 600 tons), which stands in the middle, between the industrial manipulators of jolly series and the industrial robots of Speedy Plus series.
The Master series gets the same CNC as the one of the Speedy series, specially applied in a new version, allowing its installation on board. Inside the control until there is an independent asynchronous brushless drive for each axis. They are managed by the CNC, in controlled interpolation mode. |
|
The EPSON EZ-modules are high-performance linear modules, which may be combined in either suitable way. They perform great thanks to a maintanence free AC-motor. High precision bearings in a stable alloy housing take care for stability and precision.
EPSON makes it easy!
|
|
ICS(P)A2 Two-Axes Integrated Combination System
The most commonly selected IS(P)A Series configurations are offered as completed double axis systems ("P": precision design).
All cartesian ICS(P)A Series systems are lightweight, compact, and highly stable platforms.
A wide variety of unit configurations are available to suit each user`s particular needs.
Each cartesian ICS(P)A System comes with all brackets and cabling and is ready to be assembled and introduced into producton setting. This allows the user to increase productivity immediately.
|
|
Schneider Electric Motion offers both single- and multi-dimensional Cartesian robots:
-Linear modules: linear tables, cantilever, portal and telescope axes
-Dual- and triple-axis systems: linear positioning equipment, linear professional robots, portal robots and wall-mounted robots
-Low-mass systems
All linear modules can be combined. They are modular and compatible with ITEM profiles. Several axes may be combined to form handling systems with perfectly tuned components. |
|
The TM Robotics’ BA series of Toshiba Machine industrial robots, known as the ROIbot, uses a modular building block design, allowing single or multiple axis configurations. New to the range are the BA05 and BA07 Cartesian supplier of linear actuators, compact ball screw actuators for use in high rigidity applications. Their highly rigid, slim frame components can be constructed in two-axes or three-axes (orthogonal) combinations. The easy to use TS200 controller is standard for entire BA series and its absolute-professional encoder eliminates home return. Arm lengths vary from 50mm - 600mm and the suppliers of actuators are accurate to 0.02mm. Payload can be up to 30kg. Maintenance is easy using replaceable components while the encoder is backed up with commercially available batteries.
|
|
TecnoMatic's Cartesian Digital control (CNC) professional robots represent the best that modern technology can offer for automating thermoplastic injection moulding processes,and are the product of the company's 15 year experience in this field.
The Free Guided Programming (FGP) capability taht all TecnoMatic CNC robots have makes it possibile to relise extremely flexible work cycles with no limitations to programm complexity or lenght. This is accompanied by the care we take in making sure programming and all the various operations are as simple as possible, and well withing the reach of all the operatives working on the injection moulding line.
This series of robots, realised with load bearing specification structures in high strngth steel and light alloy that allows for very high speeds and gret structural rigidity.
Only the best available components are used in their constructions, realised by leading companies in the field. |
|
XRS Cartesian robotic Module
Standard XRS Systems are pre-engineered to optimize workspace, simplify selection, shorten delivery and lower costs. A unique mix of linear servo motor and ballscrew drive technology provides optimized dynamic performance for today's demanding automation applications. These systems are offered in three size platforms (Small; Medium; Large) and 124 standard variations.
The "Small" class systems offer a smaller footprint for light loads and shorter travels.
The "Medium" class systems are designed for mid range loads and travels.
The "Large" class systems offer greater load capacity and longer travels.
|
|
| Standard XRS Systems are pre-engineered to optimize workspace, simplify selection, shorten delivery and lower costs. A unique mix of linear servo motor and ballscrew drive technology provides optimized dynamic performance for today's demanding automation applications. |
|
| Realised through mechanics MC (extraction X axis mobile on the Z axis trolley) these professional robots are devoted to the handling of pieces produced by medium and high tonnage moulding machines (from 1000 up to 6000 tons) with payload from 25 up to 120 kgs. The brushless synchronous motors manufacturers are managed by driving professional gears located on a control professional cabinet mounted on the ground. The programming can also be performed through a comfortable and portable remote controller with colors high-resolution TFT professional display. For these models are also provided different y axis configuration(indicated among optionals with S,H,T letters), which permit performances (speed and acceleration) or payload improvements. |
|
| Tecnomatic' s Cartesian Numerican Control (CNC) industrial robots represent the best that modern technology can offer for automating plastics injection moulding processes and are the product of the company' s 15 years of experience in this field. The Free Guided Programming (FGP) capability that all Tecnomatic robots have make it possible to realise extremely flexible work cycle with no limitation in the program complexity or lenght. This is accompained by the care we take in making sure programming is as simple as possible and well within the reach of all operatives working on the injection line. This series of robots is realized with load bearing suppliers structures in high rigidity steel and has vertical axes in .high strenght light alloy that permits very high speeds and great structural rigidity. Only the best available components are used in their construction, manufactured by leading companies in their respective fields. |
|
The Axess Sepro Mechanics
Option : Pneumatic secondary rotation R2 parallel to demoulding axis 0-180°, with programmable intermediate stop at 90°.
Options : 1 additional vacuum and/or pressure circuit. 1 or 2 additional pressure circuits. |
|
The SUPERFAST professional manipulator takes the feedhead from the mould and fully separates it from the moulded pieces, in addition to significant time savings, this also permits immediate recycling of the matrial, and prevents the feedhead from falling into and remaining in the mould.
Incidence on moulding cycle time is negligible due to the manipulator's high operation speed. |
|
Standard components ensure short deliveries & competitive pricing
Using our engineering expertise standard parker components enable gantry kits to be supplied cost effectively. Factory pre-assembly no longer required as proven component configurations eliminate possible installation errors. This combined with delivery times in the region of 4 weeks results in a solution from concept to operation in the shortest possible time.
Selectable levels of integration enable the machine builder or system integrator to assemble a suitable solution:
Suppliers of actuators only (with gearboxes)
Actuators + cable management system
Actuators & motion control & cable chain management |
|
Function Cartesian robot mono-axes, 2 or 3 axes according to your schedule of conditions, with:
- Mechanical System
- Motorization
- Control of axis
- Multiple accessories
Function Industrial manipulator, with:
- Mechanical System
- Motorization
- Control of axis
- Multiple accessories |
|
| Great compatibility between the various sections, linear guidance and systems of drive, enable us to produce gantries of all sizes according to the uses. |
|
1) Simple teaching for Various Applications
i) Complicated Professional robot language is not necessary.
ii) We provide you unique system program for each
purpose with JR2000N Series, such as screw tightening,
dispensing and soldering release you from making
complicated programs and using robot languages. Each
axis shifts flexibly for remote or direct programming, so
you can register points quickly.
2) Valuable Professional memory capacity
Program capacity: Up to 255 programs or 30,000 point
Sequence function capacity: 100 programs (1,000
steps / 1 program)
3) All in one
There is no wiring between the robot and a controller box
since the controller is inside the robot body. Just plug it
in and the robot is ready to use.
4) Useful P.C. professional software the JR C-points
It is helps you teaching program and modifying teaching
program. Also
you can save teaching program data in your P.C.
|
|
| The side entry industrial robots series Side CNC (digital control) has been designed to satisfy the demands for very high speed cycle, for the quickest unloading of the moulded parts. The high rigidity structure combined with very powerful motors, it allows to reach an overall cycle time of 2.5 seconds (stacking inclusive) and a moulding delay time of0.4 second. This series of robot is particularly suitable to be used in the food packaging, in mould labelling (IML), in CD box production, etc... In comparison to other similar robots this series of robots, being also provided with a third motorized vertical axis, can directly stack the moulded parts without any other external automations. Simple and intuitive programming, without limits! Very practical it is besides the possibility to directly fix the robot on the top of the fixed plane of the injection moulding machine as a traditional robot, in order to avoid encumbrances on the floor and not to have any relative movement between injection moulding machine and robot (however, if required, it is possible to install the robot to a special structure fixed to the floor). |
|
|
|
Cartesian robots, Gantry robots
