|
|
Features
- 1.0mmX0.5mm SMT LED, 0.5mm THICKNESS.
- LOW POWER CONSUMPTION.
- WIDE VIEWING ANGLE.
- IDEAL FOR BACKLIGHT AND INDICATOR.
- VARIOUS COLORS AND LENS TYPES AVAILABLE.
- PACKAGE: 2000PCS / REEL .
- MOISTURE SENSITIVITY LEVEL : LEVEL 3.
- RoHS COMPLIANT.
Description
The Hyper Red source color devices are made with InGaAlP on GaAs substrate Light Emitting Diode.
|
|
Features:
- Package: rectangular mounting part for 5 mm LED, grey synthetic
- Feature of the device: The rectangular mounting part series has been specially designed to work with the 5 mm radial LED from Osram Opto Semiconductors.
Applications:
- This component can be equipped with a 3 mm or a 5 mm LED.
- Several components can be installed in series.
|
|
Discrete LED's / White
Description: White LED , Available in 3mm and 5mm, see individual datasheets for more detailed information on each product.
|
|
|
Light emitting diodes (LEDs) are opto-semiconductors that convert electric energy into light energy. Compared to laser diodes (LDs), LEDs offer advantages such as lower cost and longer service life. HAMAMATSU provides high output power LED ideal for optical switches, encoders, surveying and optical communication.
|
|
Features
- LOW POWER CONSUMPTION.
- SUITABLE FOR AUDIO PANEL INDICATOR.
- FIT 2mm HOLE IN PANELS.
- LONG LIFE-SOLID STATE RELIABILITY.
- RoHS COMPLIANT.
Description
The Bright Red source color devices are made with Gallium Phosphide Red Light Emitting Diode.
|
|
|
|
|
|
Following its acquisition of the US based LEDCO division of Wilbrecht Electronics, Inc., Microprecision is introducing the popular series of chrome panel mount indicator lights to the European market. Made with a tough reflective, nickel-plated brass housing for 3mm and 5mm LEDs, the indicator lights are ideal for control panels, instrumentation and front panel fault indicators that are exposed to harsh environmental conditions. Equipped with a nitrile gasket/washer and sealed to IP66, the chrome LEDs are suitable for water-tight and high vibration applications.
The rugged panel mount LEDs are available with daylight readable single colours, bicolour, tricolour, and blinking. The products are available with bare pins or wire leads which can be customized with a wide selection of connectors for fast installation in your application. Options include internal resistors for 5-60VDC and 120VAC, black matte housing finish, custom lead lengths and wire types, including avionics grade solution.
For more information please visit our news section on www.microprecision.ch .
|
|
|
|
|
|
APPLICATION - CLIPMOUNT permits the panel display of a PCB mounted LED without its physical attachment to the front panel. This mount enables the use of interconnects between display panels and circuit boards.
VERSATILITY - CLIPMOUNT provides a method of displaying PCB or panel mounted LEDs on a display panel. These mounts are available in either black or clear allowing an LED viewing angle of up to 180 degrees. Mounts are available for both 3mm and 5mm LEDs.
BRIGHTNESS - CLIPMOUNT provides direct viewing of the LED. Mono and multicolor LEDs as well as infrared and photo-detection devices can be mounted in this manner. This design also permits use of either diffused or nondiffused LEDs.
INSTALLATION - CLIPMOUNT are easily installed for PCB mounted LEDs. Simply slide mount thru a 9/32" panel hole and press retaining ring into place. The LED is now able to slide in and out of mount without its physical attachment to front panel. For interconnect applications, hold mount tightly to panel with a nut driver and press connector with LED on from rear.
SPECIFICATIONS
MATERIAL: Mount - Polycarbonate (black - clear) Ring - Polypropylene (black) (U.L. Listed Materials)
|
|
3mm Chrome Panel Mount
5mm Chrome Panel Mount
3mm Chrome Panel Mount Recessed
5mm Chrome Panel Mount Recessed
Press-Fit 3mm Panel Mount
Press-Fit 5mm Panel Mount
|
|
Elliptical, round and square LEDs incorporating selected high performance die ensure that the most demanding application requirements can be satisfied. Water clear, tinted and wide angle diffused as well as Long Life White options are offered.
SMT LEDs
A comprehensive range of surface mount LEDs is also available in 0603, 0805, 1204, 1206, PLCC-2 and PLCC-4 versions.
The complete visible spectrum of colours can be supplied, as well as bi-colour and tri-colour versions.
Applications include background illumination, backlighting, status indication, audio equipment and automotive dashboard displays.
|
|
Features
• Fixed LED in metal-threaded shaft base with removable transparent lens cap
• Replaces the ET-5 and ET-6 incandescent high voltage panel indicators found in control rooms of power plants, sub-stations, and utilities
• Integrated series resistor prevents short circuiting, special fuses are unnecessary
• Can be front mounted or rear mounted to the panel; both nuts & washers can be removed or adjusted — accommodates panels up to 2.2 inches in thickness
• Faster on/off time than incandescent lamps
• LED life of 100,000 hours
• Shock and vibration resistant
• Much lower power consumption, lower energy costs
• No cold filament inrush current
• Only one 21/32 inch hole (0.66", 16.8mm) is required for panel mounting
• 12 inch leads for screw or soldered connections
Options (For large quantities and qualified applications)
• Optional AC voltages: 67Vac, 115Vac, 230Vac
• Optional clear lens cap over color LED
|
|
EM20-FPSI 1010
- Red/Green SMART Indicator
- 0 to 30Vd.c. Range
- 2 User Prog. Thresholds
- 1 Control Output
- IP67/NEMA 4X Metal Bezel
The EM20-FPSI 1010 is a ready-to-use panel mounted SMART indicator. This compact LED module indicates green when the input voltage is between two easily programmable levels and red when the input voltage is higher or lower. The levels are easily set and stored in Flash memory. They can be changed as often as desired. This unit can be used in countless applications where a GO / NO GO indicator is required. The module incorporates one output, allowing the user to drive an external alarm or to control the process being monitored. The module uses a metal bezel providing IP67/NEMA 4X protection and screw terminal connectors for easy installation. A 20.5mm (0.81?) diameter panel cut-out is required to mount the unit. For a list of compatible sensors click here. This is a popular part, normally stocked in high quantity and suitable for new designs.
|
|
|
|
|
|
APPLICATION - P-C-LITEs are used as circuit board mounting sockets for status, logic and fault detection lights. Also used for back panel lighting, front panel function lights and mounting of photodetection type devices.
VERSATILITY - P-C-LITEs are relampable, no direct soldering to LED. PCH and SMD series mount horizontally, PCV series mounts vertically. The PCV can be installed on one side of the PCB while the LEDs are inserted from the reverse side of the board.
DESIGN - P-C-LITEs are manufactured from UL listed thermoplastics. Unique contact design permits automatic adjustment to the various sizes and shapes of LED leads. Also accommodate IR emitters, phototransistors and incandescent bi-pin lamps.
INSTALLATION - P-C-LITEs are wave soldered (PCH/PCV) or surface mounted (SMD) to PCB along with other components. Sockets are provided with polarity identification. Molded standoffs permit easy board cleaning. Lock-type security for component leads in high vibration and shock environments.
SPECIFICATIONS
MATERIAL: Housing - Thermoplastic, U.L. 94 V0 (black). Contacts - Phosphor bronze, 60/40 tin plated.
|
|
PCB Mounted LED's
J1001X R/Angle PCB LED
Features and Benefits
♦ Solid State Reliability
♦ Mean Time Between Failure 100,000 hours (11½ years)
♦ Board Space Saving
♦ “Fit and Forget” Philosophy
|
|
Features
- 1.8 mm sized LEDs save space
- Housing material meets UL94V-0
- Facilitates PCB mounting
- Fast turn on/off time I.C. compatible
- Colors can be mixed in a single housing
- Solid-State, high shock / vibration resistant
- Single color or Bicolor configurations
- Long life / 100,000+ hours (10 years)
- One piece housing
Options
- Sunlight Visible Ultrabrights
- Low Current (2mA) LEDs
- Special colors: Orange, Pure Green, Blue
- Infrareds 840nm, 880nm, 940nm
- Clear illuminator LEDs for backlighting
|
|
Forge Europa offers an extensive range of high performance solid state LED lamps available in a variety of different package diameters, colours and profiles.
LED lamps incorporating high performance die ensure that even the most demanding application requirements can be satisfied including traffic signal, variable message sign (VMS), video wall and accent lighting projects
|
|
Designed for PCB mounting.
Short-travel keyswitches, with distinct key click for use under an overlay and/or under RK 90 keycaps. Full-travel keyswitches for designing keyboards with keycaps.
RACON 8 / 12 short-travel keyswitches
RF 15 / 19 short-travel keyswitches
KN 19 short-travel main switch (250 V/4 A)
RK 90 system keycaps
RG 85 III short-travel system (vandal-proof)
RS 76 full-travel keyswitches
Keylock switch for PCB mounting
|
|
|
Elliptical, round and square LEDs incorporating selected high performance die ensure that the most demanding application requirements can be satisfied. Water clear, tinted and wide angle diffused as well as Long Life White options are offered.
|
|
| ... products without technical information |
| |
|
|
Indicator lights
