|
|
J1800 - Format DIN 96x96
J2000 - J2400 (J2100 / J2200 / J2300) - Format DIN 144x144.
The most basic models.
They are intended to replace filament indicator lights on cabinet front panels.
- 8, 12 or 24 "high luminosity" leds.
- Light up on closing of the input contact.
- "Test led" buttons on the front panel.
- Labels are easy to make (on PC).
- Economical and strong.
Option:
Remote carry "synthesis" relay, selection is channel by channel. No reset possible.
(See also the J1900 / J3000 / J3500 range of alarm sequence panels)
|
|
EZ-LIGHTTM Operator Indicator Lights
- Displays multiple colors of highly visible LEDs in each unit
- Offers five housing styles for easy integration
- Replaces post or stack lights with a single compact unit
- Installs without certified personnel, near the operator
- Several configurations for a variety of applications
- Displays one to five colors, depending on model
- Eliminates bulb replacement with long-lasting LEDs
- Compatible with PLC or other logic-level control outputs
- IP67 for direct machine mounting
|
|
This range of panel mounting LED indicators consists of many different bezel styles, types of LED’s and colours. The range has developed to meet the many different needs of panel design including IP67 environmentally sealed versions for use where a front panel seal is needed.
The vandal resistant LED indicators are designed to complement the vandal resistant switches (see the Switch Section, page 177), they have similar profiles with stainless steel bodies, sealing to IP66 & 68 and are built to withstand harsh environments.
|
|
|
EAO indicators / pilot lights with protection up to IP 67 and different coloured lenses and LED illumination. The indicator / pilot light can be modified with bezels for raised or flush mounting.
|
|
KRN - Pilot Light Head
description:
Body: LMN -
Pilot Light Head 24 x 18 mm
description:
with labelling option
LXJL5 - Pilot Light 54 x 27 mm
description:
T5.5K socket
LXJN - Pilot Light Head 54 x 27 mm
description:
with labelling option
LXJNN - Pilot Light Head 54 x 57 mm- IP40
description:
accepts 2 separate lampholders, with labelling option
LXL5 - Pilot Light 25 x 50 mm
description:
with labelling option
|
|
|
Immediate indication of process status is a must in any application. Realize this goal with Signalight towers that offer 360 degree visibility from any direction or the SLC series panel mounted pilot light arrays which provide for a more detailed local indication. Both offer a variety of configurations, and either LED or incandescent lamp illumination.
|
|
|
Immediate indication of process status is a must in any application. Realize this goal with Signalight towers that offer 360 degree visibility from any direction or the SLC series panel mounted pilot light arrays which provide for a more detailed local indication. Both offer a variety of configurations, and either LED or incandescent lamp illumination.
|
|
|
A rich variety of shapes, sizes and colours of signal lights are available and suitable for different series of rocker or push-button switches.
|
|
|
The ET-16 (Incandescent) and ET-17 (Neon) indicating lamps are designed for application on switchboard panels up to and including 1/4-inch thickness. The lamps economize on space and permit easy replacement of bulb and resistor.
|
|
|
Immediate indication of process status is a must in any application. Realize this goal with Signalight towers that offer 360 degree visibility from any direction or the SLC series panel mounted pilot light arrays which provide for a more detailed local indication. Both offer a variety of configurations, and either LED or incandescent lamp illumination.
|
|
The P861 LED Lamp provides visual on/off indication of process conditions in both safe and hazardous areas. Available in a choice of six super-bright colours (red, orange, yellow, green, blue and white), they are ideally suited as part of a panel mounting indicator or illuminated pushbutton assembly.
The P861 itself is a standard BA9s intrinsically safe LED lamp which can be supplied as part of a pilot light or illuminated pushbutton or alternatively supplied separately to be used in any standard switch or lamp assembly.
With the LED lamp being current limited to take a maximum of only 20 mA, it is possible to drive two lamps from a single IIC interface without any affect on the brightness.
With the LED's low power consumption, low heat dissipation and long life expectancy, the P861 is an ideal indicator for safe and hazardous areas alike.
|
|
|
VCC LED's Through Hole 3mm, 5mm, 10mm LED's. Available in Multi Color, Narrow and wide viewing angles. Ultra high bright output for daylight use. VCC LED's are designed around our Panel Mounting hardware making design options a quick easy soultion for indicator panel mounting.
|
|
Avago Technologies is one of the largest producers of visible LEDs in the world and ships billions of products annually. Known for its LEDs%u2019 performance, efficiency and reliability, Avago offers an extensive portfolio of products at globally competitive prices. From a discrete LEDs supplier, Avago has emerged to offer total solutions for illumination and lighting applications. Key products include high brightness and high power LEDs, PLCC surface-mount LEDs, and display backlighting module solutions. These LEDs and display modules address a wide range of markets, including electronic signs and signals, automotive, solid state lighting and LCD display backlighting.
Types of Led
- Auto Focus Auxiliary Flash LED
- ChipLEDs for Automotive
- High Brightness Through Hole Lamps
- High Power LEDs
- Moonstone® High Power LEDs
- Standard Brightness Through Hole Lamps
- Subminiature Lamps
- Surface Mount ChipLEDs
- Surface Mount PLCC LEDs
- Surface Top Mount Mono Color ChipLEDs
|
|
Features:
- T-3/4 (2mm) Surface Mount Package
- Tape & Reel option (See Tape & Reel Specifications)
- Lead Form Options: Gullwing, Yoke, Z-Bend
- Narrow Emission Angle, 24°
- Wavelength = 940 nm, GaAs
- Clear Water Lens
- Matched Photosensor: QSB363
-High Radiant Intensity
|
|
|
Light emitting diodes (LEDs) are opto-semiconductors that convert electrical power into light energy. Compared to semiconductor lasers (laser diodes or LD), LEDs offer advantages such as lower cost and longer service life. We offer a wide range of LEDs that enhance emission efficiency via a high output power LED chip mounted in a reflector (mirror) at the package base. Our LEDs have peak emission wavelengths that range from 660 nm to 940 nm and 1300 nm to 1650 nm, for applications such as camera auto focus and optical fiber communications.
|
|
|
Toshiba is one of the leading suppliers in the visible LED market. Its LED product lines provide high light emitting intensity in various colors and packages. Toshiba is among the first to introduce InGaAlP technology, which provides significant improvement in luminous intensity. Toshiba also introduced new visible LEDs based on the combination of ultraviolet (UV) LED and phosphor technology. This UV based LED allows unique colors to be generated and minimizes color shifts. And with its new lines of high brightness and high flux white LEDs, the Toshiba LEDs offerings can satisfy today's as well as the future's lighting requirements.
|
|
|
We have various products based on developed blue LED technology. There are various kinds of products such as newly-developed products, LED chips, lamps and Navi Tower in order to meet various demands.
|
|
|
CABLE ASSEMBLIES, CONNECTIONS FOR LEDs, FANS, SWITCHES, ETC.
|
|
Vertical LED Assemblies
5mm Narrow Profile
3mm Standard Profile
5mm Standard Profile
3mm Narrow Profile
ELM7
3mm Universal 5-hole Mount
3mm Rectangular
Universal Black Self-Retaining
Universal Natural Self-Retaining
Variable Height Vertical
Right Angle LED Assemblies
Single 5mm LED Holders
Multi-Functional Assembly for 90 ° Display
Sub-Miniature (2mm) 90 °
Single-Level 90 °
Bi-Level 90 °
Tri-Level 90 °
Quad-Level 90 °
Rectangular 90 °
3mm SMD 90 °
5mm SMD 90 °
Panel Mount Assemblies
|
|
APEM, a comprehensive range of professional LED indicators
- LED indicators for panel mounting
- Seven different diameters: 6, 8, 12, 14, 16, 19 and 22 mm
- Three different bezel shapes: prominent, recessed and flush
- Bezel materials plated in bright chrome, black chrome and satin chrome
- Solder lug, quick-connect, pin or wire terminals
- Standard diffused red, green, yellow, blue and white LEDs, plus bi-colour, tri-colour and flashing LEDs
- Complementary range of super bright, water clear LEDs also available (sunlight visible)
- Optional panel sealing to IP67
Integral resistors permit direct connection to 12V, 24V,110V and 230V.
APEM, the broadest offering in the switch market: miniature switches, industrial switches, LED indicators, professional switch panels and professional joysticks.
|
|
• Filament lamp or neon illumination
• LED illumination, dc or ac ratings (mains 125/250V dual rating)
• Red, yellow, green, clear or blue colours (as standard)
• Panel mounting holes from 5.8mm to 25mm diameter
• Front of panel sealing to IP54
• Wide choice of profiles
• Circular and rectangular formats
• RoHS compliant
|
|
|
|
|
|
VCC's CMS 322 lens is designed to provide a means of protecting equipment from both drip or splash conditions while displaying panel or circuit board mounted LEDs.
The traditional methods of moisture sealing have been the use of bulky military style indicator lights requiring o-rings, nuts and washers. While these units are effective, they do not provide aesthetics desired in today's modern equipment designs. As a result, engineers faced with the problem of moisture sealing are forced to design elaborate display panel windows with special gaskets. When limited by design funds, engineers have attempted to seal standard panel lenses or indicator lights with adhesives such as RTV. These methods are very expensive in component hardware, extremely labor intensive and lack required aesthetics.
VCC's CMS 322 low-profile lens is equipped with a moisture sealing gasket. Tests by an independent environmental testing laboratory have shown that the lens provides an effective seal against splash and drip conditions. In addition to the water tests, the lens and retaining systems were tested up to 6Gs of shock and from 0 to 2000Hz of vibration. An operating temperature test from -40°C to +85°C and a UV test were also performed. The conclusions attained upon completion of these tests were that the CMS Series lens and the retaining systems used exceeded all test criteria.
|
|
FLASHING DEVICES
The electronic lighting fixtures for electrical panels provide an efficient, easy-to –install, technologically advanced tool. The product created as a result of this project has a modern compact design and makes lamps extremely versatile, with different possibilities of positioning and rapid installation speed.
Models from 8w to 21w with 24CC/AC, 125V AC and 240V AC power supply
Installation of the flashing safety device prevents accidents, warning the operator of the presence of voltage in the electrical system by means of flashing. The DSL flashing devices are installed in highly visible positions upon opening of the electrical panel doors, and connected directly downstream to the main switch. The flashing of the three red lamps highlights hazardous conditions. The DSL devices can be connected to both three-phase and single phase lines.
|
|
|
|
|
|
VERSATILITY - CLIPLITE, installed in display panel, is used with PCB mounted LEDs. Lenses remain attached to the display or panel door while the LEDs are fixed to the PCB. The lenses are ideal for use together with the CONXRITE connector assembly.
BRIGHTNESS - CLIPLITE utilizes fresnel rings to increase apparent brightness and viewing angle up to 180 degrees with either diffused or nondiffused LEDs.
PROTECTION - CLIPLITE helps prevent IC failures caused by electrostatic discharge (ESD). Introduction of EDS through an exposed panel mounted LED is capable of damaging or destroying a semiconductor. A CLIPLITE mounted LED helps guard components from ESD up to 16 kV while affording the LED physical protection.
INSTALLATION - CLIPLITE is inserted through panel opening, retaining ring is pressed into place. PCB mounted LEDs slide into lenses when the panel cover is closed or the PCB card is inserted into the case.
SPECIFICATIONS:
MATERIAL: Lense - Polycarbonate; Ring - Polypropylene (U.L. Listed Materials)
|
|
|
The GLO Series lenses are made from a unique thermoplastic material that diffuses a LED’s light output and dramatically reduces “hot spots”. The result is a clean, hi-tech glow that evenly distributes the light along the lens surface and can be viewed from nearly any angle. Currently, VCC offers the SMB 200, SML 190, CLB 300, and CLF 280 as part of the GLO Series. Custom design inquiries are welcome
|
|
|
|
|
|
The STD Series mounts have been developed to control or eliminate problems of mounting components on PCBs. These include difficulty in maintaining uniform component height currently requiring the use of mounting jigs and fixtures or tubular spacers. Another is the lack of a suitable method of mounting tri-lead devices. Additionally, ordinary tubular spacers used as standoffs do not provide the necessary vertical or lateral component stability, nor do they protect the leads from electrical shorting. All of these shortcomings are addressed by VCC's new bi-lead and tri-lead component standoffs.
Obtaining uniform LED height control on circuit boards is simplified with the use of these mounts that are available in varying lengths from one hundred thousandths of an inch in increments of ten thousandths of an inch.
The design of this standoff allows for the PCB-mounting of single, dual, and tri-lead devices with centers on standard spacing. The STD Series standoff has a cylindrical body with channels for both lead separation and lateral stability. Incorporated in the channels are tabs which retain the component and standoff as a package allowing for preassembly prior to board stuffing and wave soldering. The mounts' molded standoff pads allow for thorough removal of contaminants resulting from the PCB soldering process.
|
|
Bivar's "Award Winning" Optoelectronics Business Unit represents our fastest growing unit serving a wide-range of customers throughout the world. We Offer the industry's largest choice of Discrete and Surface Mount LEDs, LED Mounts / Spacers / Holders, and LED Assemblies, new products include Hi-Brite LED Modules, Flexible Light Pipes and Rigid Light Pipes, and Wedge-Based LEDs.
|
|
Features:
- Package: LED Clip for 5 mm LED, black synthetic
- Feature of the device: LED Clip series has been specially designed to work with the 5 mm radial LED from Osram Opto Semiconductors.
Applications:
- This component can be equipped with a 3 mm or a 5 mm LED.
- Several components can be installed in series.
|
|
|
|
|
|
FEATURES
- Right angle PCB mount for bi and tri-lead LEDs for use as logic and diagnostic indicators.
- Accommodates round and rectangular shapes of LEDs with or without flanges.
- Dove-tail interlock feature allows mounting of both mono and multi-colored LEDs.
- Mount forms LED leads which are locked into position by retaining tabs.
- Formed LED leads are staggered in their length permitting easier PCB insertion.
- Molded standoffs permit the easy cleaning of PCB after wave solding operation.
SPECIFICATIONS
MATERIALS: Housing - Thermoplastic (black) U.L. 94 V0.
MOUNTING: PCH 175 - Right angle thru-hole mount for LEDs. Can be used as a single LED mount or banded together in an array with its dove-tail interlocking feature.
When banded together with the PCH 175 the LEDs are on .250" centers.
LED: 5mm size - round or rectangular shape with or without flange. Bi-lead, standard .100" lead spacing. Tri-lead, either .050" or .100" lead spacing. Both the bi-lead and tri-lead LEDs can also be combined in arrays with one another.
|
|
Features
- 1.0mmX0.5mm SMT LED, 0.5mm THICKNESS.
- LOW POWER CONSUMPTION.
- WIDE VIEWING ANGLE.
- IDEAL FOR BACKLIGHT AND INDICATOR.
- VARIOUS COLORS AND LENS TYPES AVAILABLE.
- PACKAGE: 2000PCS / REEL .
- MOISTURE SENSITIVITY LEVEL : LEVEL 3.
- RoHS COMPLIANT.
Description
The Hyper Red source color devices are made with InGaAlP on GaAs substrate Light Emitting Diode.
|
|
|
|
Indicator lights
