Shafts
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
Torque: 5,000 Nm - 800,000 Nm
Diameter: 133 mm - 1,500 mm
Length: 0 mm - 20,000 mm
The composite drive shaft system consists of the VULKAN COMPOSITE SHAFTS with steel end fittings, steel intermediate shafts with bearings, bulkhead seals and appropriate misalignment ...
Diameter: 3 mm - 80 mm
Length: 200 mm - 6,200 mm
... Ewellix's distribution network Features: • High precision grind shafts • Available in standard shafting designs • Large range in several steel grades Ewellix precision shafts ...
Diameter: 22 mm - 58 mm
Length: 140 mm - 420 mm
... Universal joint shafts by Ganter Griff is equipped two universal joints DIN 808 with type EG, as well as a splined shaft and a sliding sleeve. With these components, power transmission is achieved. Designed ...
Thomson 60 Case® Standard Shafting While shafts may appear the same to the untrained eye, manufacturing practices and standards significantly impact roundness, straightness, case hardness and all the ...
Precision Ball Splines Optimal for applications with high speed, vibration, shock load, and precise positioning requirements. (Metric)
Diameter: 0.63 in - 4.06 in
Heavy Duty Ball Splines Available with or without keyways, these ball splines offer high speed, anti-friction linear motion under high torsional loads.
Diameter: 300 mm
Length: 480 mm
... (turning, hobbing, annealing, flank grinding, grinding, measuring) from a single source Our product range includes rotor shafts, gears with internal and external teeth as well as pinions and chain sprockets that we ...
Length: 5 mm - 150 mm
High-quality linear shafts to complement linear bearings, PBC linear plain bearings and pillow block bearings. Long life – Precision hardened and ground steel linear shafts are h6 tolerance or class ...
Slideable Intermediate Shafts Slideable intermediate shafts for absorbing displacement of body frame. From left to right: resin coated spline, triangular section type, expandable serration type.
Length: min 600.0 mm
Precision guide shafts with fastening holes Material: Steel 1.1213. stainless steel 1.4034. Version: Steel, ground. Steel, ground and hard-chromed, chrome coating 5 - 10 µm. Stainless steel, ground. The precision steel ...
Diameter: 15.05 mm - 158.31 mm
Length: 140 mm - 160 mm
Splined shafts T profile Material: Aluminium. Version: Bright. Note: Standard T-profile to DIN 7721 T2 with metric pitch (trapezoidal toothing). For manufacturing your own toothed wheels
Diameter: 14 mm - 54 mm
Length: 1,000 mm
Splined shafts similar to DIN ISO 14 Material: C45 steel or 1.4301 stainless steel. Version: Cold-drawn, bright. Note: Spline shafts based on DIN ISO 14 with straight parallel flanks. A spline ...
Diameter: 6.35 mm - 19.05 mm
The SS series, SZ seires, and GR series are spline shafts developed by Haydon Kerk Motion. They are built with stainless steel construction with proprietary Kerkote® TFE coating. They are designed suitable for light load ...
Diameter: 25 mm - 110 mm
The ZR and GX series are manufactured by Neff, and are universal joint shafts that are torsionally adjustable and serves to bridge huge shaft distances at rotary speeds up to 1500 rpm. They have double ...
Torque: 11.5 Nm - 23 Nm
Length: 470, 1,177, 1,884 mm
... to 2 positioners; suitable for connecting positioners not aligned with each other (max misalignment 45°). State of supply shaft and grub screws made of AISI 304 stainless steel; 2 DIN 808-7551 cardan joints in C45 steel ...
Torque: 20 Nm
Diameter: 28 mm
Length: 1,000 mm
- Use:fitted on the angular idler pins, it transmits synchronised and not aligned movement to 2 positioners. State of supply 1 fixed sleeve polyamide body, 1 removable sleeve polyamide body, 1 stop ring for removable sleeve in shot-peened ...
The flexible drive shafts NA is the power transmittion between motor and machining units. Speed range at 50Hz [min-1]12000 - 20000 Weight / color1.3 - 3.8 kg
Torque: 5,000 Nm - 800,000 Nm
... driveshafts built to be customized with flexible couplings and connecting elements for an optimal driveshaft solution. Available in many lengths up to 10m (30’) per section. CENTA Carbon Drive Shafts CENTA ...
... Linear Shaft can be used in a wide range of applications as a mechanical component from straight shaft to spindle shaft. NB’s expertise in machining and heat-treatment turns into manufacturing ...
NB
Diameter: 4 mm - 25 mm
... smoothly. Several models are available, including various nut and shaft configurations. Key Features At-a-Glance NB ball splines are comprised of a shaft and nut assembly. Ball spline shafts ...
NB
... BALL SPLINE can be used for both rotational motion and linear motion. The applications include SCARA robots, the vertical shaft of assembly equipment, tool changers, and loaders, etc. You can use NB rotary ball splines ...
NB
Diameter: 29 mm - 47 mm
Length: 352 mm - 1,042 mm
The DS series is a line of shafts manufactured by Rotar. It offers an efficient solution for applications requiring shafts with long stroke, in a very minimal length. The unit provides an extra stroke, ...
Diameter: 18 mm
Diameter: 14 mm - 42 mm
Length: 102 mm - 249 mm
... applications in many countries. We not only offer buyers worm gearboxes,but also offer their components like single/double output shafts,input flange,output flanges,torque arms,bearings and so on. Our worm gear ...
Torque: 0 Nm - 190 Nm
Length: 0 m - 3 m
Transmission shafts: AT series: max 620 Nm ATM series: max 380 Nm
Diameter: 7.4 mm - 236.9 mm
Length: 50 mm - 200 mm
Rods are essential components used in the manufacture of special pulleys. They are available in metric or inch pitches, offering flexibility of choice to suit specific requirements. Our workshop can quickly provide a quotation for pulley ...
Length: 0 m - 5 m
... rotation. It is advisable to choose a left spring shaft to turn clockwise, and a right spring shaft to turn counterclockwise. In case of left spring shaft to turn counterclockwise and ...
FIAMA
Diameter: 76, 150, 200 mm
Length: 300 mm - 5,000 mm
... the requirements of our customers for better delivery times and lower prices, we now have a series of IBD standard clamping shafts ready. The IBD standard series is always available from stock and can thus be delivered ...
Diameter: 50 mm - 152.4 mm
The Differential rewind shaft series MFW-RS is good for winding materials with various thickness. The consistent web tension will be secured during the winding procedures. The friction elements operate independent from ...
Diameter: 0.31 in - 2.75 in
Length: 2.062 in - 9 in
... Standard Inch Shafts Precision Carbon Steel Heavy Duty Shafts are designed and manufactured to tight tolerances to guarantee the most efficient product fit and reliability with Smith-Trax Yoke Type ...
Torque: 15 Nm - 450 Nm
Diameter: 6 mm - 54 mm
Length: 0 mm - 4,000 mm
Equipped with one or two attached metal bellow couplings or elastomeric couplings. High offset compensation of the shaft ends to be connected and best torsional stiffness. Available in the following ...
HA-CO GmbH
Equipped with one or two attached metal bellow couplings or elastomeric couplings. High offset compensation of the connected shaft ends and best torsional stiffness. With one or two attached couplings High ...
HA-CO GmbH
Torque: 15 Nm - 450 Nm
Length: 0 mm - 4,000 mm
... attached metal bellow couplings or elastomeric couplings. Misalignment compensation of the connected shaft ends and best torsional stiffness. Completely in stainless steel Easy mounting Very low ...
HA-CO GmbH
Diameter: 0.19 in - 2 in
Length: 3 in - 60 in
... customer-specified length tolerances of: 3/16" – 1-1/4" shaft = ± 0.0300" 1-3/8" – 2" shaft = ± 0.060" 2-1/2" – 4" shaft = ± 0.125" 3/16" – 1-1/4" shaft = ± 0.0300" ...
Diameter: 4 mm - 50 mm
Length: 600, 300, 1,000, 150 mm
... to customer specification 4 mm – 30 mm shaft = ± 0.8 mm 40 mm – 50 mm shaft = ± 1.6 mm 60 mm – 80 mm shaft = ± 3.2 mm 4 mm – 30 mm shaft = ± 0.8 mm 40 mm – ...
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining