|
|
| Products 211 to 240 of 308 |
|
|
|
|
HAM offers a large range of standard tools for multiple cutting tasks for the industrial consumer. Our variety of products covers end-mills with a special cutting geometry for Aluminium as well as end-mills for hardened material, which gradually reduce the need for electrical discharging processes in mould and die industry. With HAM´s standard tools it is possible to machine hardened steel up to 63 HRC without problems and economically. We have also developed a special line of tools designed for use of minimum lubrication or dry machining.
HAM is permanently trying to improve the quality of the carbides in close cooperation with its suppliers. Our engineers test and retest the coatings of the tools in our technology centre in order to achieve the best suitable solution.
To be recognized as a system supplier that serves complete solutions, HAM has enlarged its product range with brazed and indexable tools. These products are offered as standards or as specials tools according to customer drawing.
|
|
|
|
|
|
Solid carbide end milling for high efficiency machining for aluminium alloys.
Mitsubishi’s range of solid carbide end mills includes the Alimaster series, designed specifically for high efficiency milling of aluminium alloys.
Development of the range has progressed by using and optimising the micro grain carbide substrate together with the latest ideas in flute and cutting edge geometry. This ideal combination has been proven over time and has enabled Alimaster to gain an advantage in today’s ultra competitive aerospace market.
The full range includes long and short series end mills for slotting and general milling, 3 flute roughing types available in various flute lengths and a ball nose type to ensure a huge range of applications are covered. The newest addition to the series includes a 2 flute corner radius type Ø3 –Ø20.
In addition to the regular series, modified standard cutters can be re-engineered for customer specific uses. Typical examples include through coolant and corner radii that match typical components such as wing ribs.
|
|
Solid carbide endmills DS
Solid carbide milling cutter for
- steel (soft and hard),
- copper,
- graphite,
- aluminium
Cutting edge diameter from 0.2 mm
Full radius, torus, micro, end, roughing and double radius mills
|
|
|
|
|
|
Seco Tools' Jabro products are high quality, solid carbide end mills found in a variety of high-tech industries including mould & die, aerospace, medical, power generation and general machining.
Our Tornado tools are perfect for high speed machining, while Diamond coated tools should be used for graphite machining and the Mini tools for the smallest of components.
The Seco Jabro Assortment:
TORNADO
A complete range of peak performance coated end mills specially developed for High Speed Machining (HSM) with a diameter range of 2-20 mm in various geometrical styles.
HPM
A range of solid carbide tools specially developed to achieve high metal removal rates in different materials. Diameter range from 2 mm to 25 mm.
HFM
A range of solid carbide tools for High Feed Machining. Diameter range from 1 mm to 12 mm.
MINI
Miniature "MEGA-64-T", Mega-T" and "Diamond" coated end mills with a diameter range from 0.1 mm (.0039") to 2.0 mm (.0590")
DIAMOND
Solid carbide end mills with Chemical Vapour Deposition (CVD) "Diamond" coating for machining abrasive materials like graphite. Diameter range from 0,2 mm up to 12 mm.
VHM
A complete range of universal solid carbide end mills. Diameter range from 1 mm to 32 mm.
|
|
|
ARNO® solid carbide milling cutters are made from ultra micro-grain hard metal. The grain sizes are 0 - 0.5 µm and depending on the finish are provided with various coatings (TiAlN or TiCN).
|
|
A unique and advance line of Solid Carbide milling tools for Threading and Grooving Deep Parts.
# Enables machining in deep holes.
# Coolant through the flutes is very effective for deep holes.
# Spiral flutes allow smooth cutting action
Shorter machining time due to multi, 3 to 5 flutes
# Longer tool life due to special multi-layer coating
Threading Partial Profile 60� -
* Same tool can produce a wide range of threads and pitches
* Same tool can produce both External and Internal threads.
The tools are offered in Carmex advanced MT8 Carbide Grade, a Sub Micron grade with Aluminium Titanium Nitride (AlTiN) multi-layer coating (ISO K10 - K20).
This grade deliver Extremely high heat resistant and smooth cutting operation, for high performance, and normal machining conditions. General purpose for all materials.
|
|
FRANKEN Alu-Jet-Cut end mills
The Alu-Jet-Cut end mills were developed especially for HPC-volume machining in aluminium materials. Due to highest surface qualities on all working surfaces and due to a special micro geometry, in connection with a tough carbide substrate, highest machining volumes can be realised with a great degree of process safety. These end mills are available in a diameter range from 10 to 25 mm with the most important corner radii.
|
|
Milling tools for machining hard materials, high-speed cutting
radius end mills, toric end mills, multi flute end mills, also stubbed
|
|
Diameters:.312" to .750"
Cutting Edge Length:.20" and .62"
Cutting Edge Radius:Chamfer & Radius
Grades Available :IN2005
|
|
Metal Slash MS-Serie for milling with high feed rate
The new Metal Slash Cutter Serie from diameter 50mmm to 125mm with high cutting capacity and low cutting force for machining of steel, die steel and cast iron. Depending to the operation feed rate of 2mm/teeth and depth of cut of max. 2mm in face milling or ramping operation is possible. Economical 4 cutting edges usage with optimized geometry for efficient milling.
|
|
Thread Milling
Cutters, Inserts and Holders
Features and Benefits
Complete programme available of both solid carbide and indexable insert thread mills - One stop for all requirements
Full form profiles -
Allows 100% thread depth against 65-75% for tapping
Full profiles present on all inserts and solid thread mills -
Allows threading to within one full pitch of blind tapping
Optimised cutting geometry -
Minimal horse power requirements even with coarse pitch threads
High technology manufacturing techniques -
Ensures high quality product for consistent predictable production even in exotic metals
Versatile multi use tools -
All tools can produce left or right handed threads
External and internal threads can be produced in the same toolholder with just an insert change
Unique cutter design -
Allowing thread milling as small as M1.6 and each tool configured for cycle time optimisation
|
|
|
|
|
|
Carmex Mill-Thread line of Inserts and Tool Holders is recognized worldwide for its full range of high quality inserts and tool holders answering to all the common thread standards and more.
Carmex system design is the most popular being produced also by most of the other thread milling tools manufacturers, thus, interchangeable, an advantage for the customers.
Carmex offers five different inserts sizes from 12mm up to 40mm length to cover applications from small to big diameters.
To support the inserts, a wide range of tool holders is included in the line, steel shank or carbide shank, for one insert or more.
All the tool holders including a built in coolant bore.
The advantages of using Mill-Thread tools and Carmex's in particular are:
* Same toolholder and insert can produce both right-hand and left-hand threads.
* A single insert & toolholder can produce a given thread on many diameters (External & Internal).
* Prismatic shape of insert's tail ensures exact and reliable clamping in the toolholder. Most inserts are double sided, having two cutting edges.
* Thread is produced in one tool pass.
* MT tools can produce tapered threads.
* Improved productivity thanks to increased cutting speeds and multitooth type carbide inserts.
* Threading to one pitch of a shoulder in a blind hole.
* Longer tool life thanks to a special multilayer coating process.
* Lower tooling costs, considerably less expensive than using taps and dies.
* Since lower machine power is required, a smaller machine can produce larger threads in a single operation with less idle time and tool changes.
* Enables machining of asymmetrical parts.
|
|
ISCAR Thread Milling
ISCAR's Thread Milling System enables production of precision threads on CNC milling machines and machining centers using helical interpolation programs.
Features and Advantages:
1. May be used for internal or external threads that are not located on
the rotation axis of the workpiece.
2. Provides precision threading.
3. Avoids chip jamming - a common occurrence when tapping.
4. Eliminates the problem of removing broken taps from holes.
5. When threading large diameters, ISCAR's Thread Milling provides a
cost advantage over tapping.
6. Eliminates the need for grinding.
7. A single insert may be used for many diameters with the same pitch,
as well as for right and left threads.
8. Tapered threads do not require taper reaming.
|
|
|
Stellram's thread mills complete a thread in one machine set up. Tools with NPT, NPTF, BSPT, BSW thread forms produce internal, external, right hand and left hand threads with the same tools. They produce easy to handle chips, minimize power requirements and interrupted cuts and casting mis-match is no problem. Excellent surface finish eliminates deburring operations. Multi-start threads are easy to produce and there are no broken taps to remove.
|
|
|
|
|
|
In developing the new solid carbide thread milling cutters for small threads from M1,6 to M8, Walter Prototyp has not only expanded its product range, but it has also introduced a new milling strategy onto the market. A short cutting section of just three pitches means the thread is milled in a special helix curve.
This new working principle gives rise to a significant reduction in centrifugal forces, which in turn increases the tool life and process reliability.
Orbital thread milling cutter for M1,6 and above
Greater shank diameter for vibration-free use, even with longer lengths
Shorter cutting edge, smaller helix angle and positive rake angle for reduced forces and a soft cut
Design for 2xd and 3xd deep threads
Ni27 thread milling cutter
Newly developed solid carbide thread milling cutter with rounded profile, which is particularly suitable for producing threads in high-quality and expensive nickel components (e.g. in the field of aerospace technology) with extremely high process reliability
TiCN-hard material coating for optimum tool life
|
|
|
The standard threading programme of DIXI Polytool comprises complete ranges of thread mills (ISO, UN, BSP, BSPT, NPT, NPTF norms), whirling tools as well as micro taps.
|
|
FRANKEN has been at work developing milling cutters ever since its foundation. You can imagine how wide our variety of carbide and HSS tools must be nowadays. Our production range includes the following main product groups:
* End mills and slot drills
* Die-sinking cutters
* Shell end mills
* Gear cutters
* Solid carbide milling cutters
* Milling cutters with indexable inserts designed especially for the die and mould industry
* Reamers and countersinks
* Clamping tools for milling cutters
With its rich variety of tool types and cutting materials, its high quality standard and its uncompromising precision, the FRANKEN product range and especially the TOPLINE Programme occupy an unrivalled top position.
If you want to find out which of our tools is the most economically efficient for your work case, please look into our sales literature or into our Electronic Catalogue Tool Finder, or contact our specialists from the Technical Service Dept.
|
|
Thread Milling
Kennametals indexable thread milling system allows for threading to a shoulder and unparalleled size control compared to conventional tapping.
The low torque and horsepower requirements mean you can effectively produce large threads on lower-power machines.
TMS Thread Milling System ISO metric
Double-sided inserts for perfect productivity
|
|
Thread Milling Cutters, Cutters with brazed carbide tips
- Thread Milling Cutters
- Thread Milling Cutters with Counterbore
- Combined Drilling and Thread Milling Cutters
- Shell End Mills
- Side Milling Cutters
- Slotting End Mills, 2 Flutes
- End Mills, short
|
|
- high cylindricity
- constant milled profile
- simple checking of thread
- in high strength material
|
|
|
|
|
|
The design of our indexable thread mill cutters and inserts represent another step forward for thread making applications.
Easy to load inserts are double-sided and 40 mm long for increased thread lengths.
In some cases, the same insert can be used for both left and right hand threads of the same pitch. The complete range is available in Seco Tools' tough and wear resistant grade F30M, a universal choice for all materials.
Seco Tools have engineered a range of tool holders with multi-tooth cutter bodies for O.D. and I.D. thread making operations. Shell mill versions are also available and hold up to six inserts which allows for more aggressive threading. Unlike tapping, milled threads can be machined to full depth, even in materials that have already been hardened, with no sacrifice to the thread form, surface finish or accuracy.
Seco Tools Threadmaster™ Mills
Seco Tools Threadmaster Mills thread holes as small as 4 mm in diameter while providing improved thread quality, productivity and lower cost per hole when compared to conventional tapping. These 2xD thread mills machine up to 100% depth and feature a high helix angle for reduced cutting forces which reduces the risk of challenges when performing a final threading operation on potentially expensive components. The thread mills are also engineered to be very rigid and vibration resistant permitting higher feed rates and promoting longer tool life.
The TiCN coating provides both toughness and wear resistance for machining of all ISO materials and high-temperature alloys through coolant holes on thread mills of 8mm shank diameter. This promotes larger chip evacuation, tool life and surface finish.
Multi Tooth Thread Milling Cutters
Multi tooth thread milling cutters are available in diameters 17-36mm, the maximum is 80mm. There are an extensive range of inserts available in pitches 1,0-6,0 mm (24-4 TPI) in most common profiles which gives the possibility to increase the feed rate and to reduce the machining time.
|
|
Vargus MiTM - The FASTest Indexable Thread Milling Tool!
Vardex MITM Thread Milling Cutters with indexable inserts
The NEW MITM thread mill is designed to reduce cycle time when generating large threads by using long inserts in a multiple-flute holder. MiTM allows significant increases
in feed rates and reduced the number of machining passes. MiTM threading tools make use of two cutting edges per insert, which considerably extends tool life.
|
|
|
Shapes SA thru SN...Moldmaker Tool & Die Burrs...Miniature Burrs...Long Shank Burrs...and Burr Kits and Sets...Metric and Fractional.
|
|
|
|
|
|
A series, G series
We are a professional producing Tungsten Carbide Products in China, expert in doing tungsten carbide BURRS, dental BURRS, HP.FG .
This product, instead of grinding wheel bur with handle, can cut and process all kind of metal and nonmetal materials under HRC70, and its service life is longer than 300 pieces of grinding wheel bur with handle. It can be used in rag, burr and welding seam of processing, cleaning, casting, forging and welding the moulds, in abrasive finishing process of internal cavity of impeller channel valve, in rounding and groove process of all kinds of machinery parts, and in technical carving all metal and nonmetal materials.
Features:
1. Dimensions:
a) Shank diameter: burs with 2.35mm, 3mm, 4mm
b) Length: 45mm / 38mm
2. 5 different grits:
223: Super Coarse (SCC)
220, 215: Coarse (CC, CP)
190, 175 :Medium (SC, SP)
140: Fine (FC)
110: Extra Fine (EFC)
3.Two fissures:
Double cut (Cross cut)
Single Cut (Spiral Cut)
4.Three surface colors:
self-colored (not plated)
Siliver (nickel plated)
Gold (TiC plated)
5.we could supply OEM service.
We have HIP Furnace to process all of the products to advance the property. Our Grades cover with all of the ISO GRADE in International, and some we can do the special grade for your special using. I believe our products can be the best raw material source for your manufacturing.
Welcome you any inquiries to my company, anything I can do for you please contact me with email or fax.
|
|
Tungsten carbide burrs are hand held cutting tools designed for:
-Effective freehand stock removal
-Weld preparation and removal (no contamination)
-Dressing and fettling
-High life time
-High safety during working
Tooling: Burrs can be used on a wide range of pneumatic, electric and flexible drive tools.
|
|
|
|
|
|
For heavy-duty applications in shipyards, foundries and steel construction, PFERD has developed two new special cut patterns for its tungsten carbide burs. The new 3R/Double and 3RS/Diamond cuts represent a new PFERD product line designed especially for tough operating conditions.
These tungsten carbide burs are characterized by their exceptional impact resistance and performance. The new cuts are ideal for all uses involving high mechanical shock or impact loads. Susceptibility to tooth chipping/breakage, splintering and bur head cracking has been effectively minimized. Even when milling at low RPM with an only moderately powerful machine, the occurrence of tooth failures is markedly reduced.
Like all other PFERD quality burs, our 3R and 3RS cut types distinguish themselves by their perfectly matched tooth geometry, number of teeth, helix angle, rake angle, and concentricity. Thanks to a very high stock removal capability over the entire service life, these tools deliver outstanding results in minimum time.
The new 3R and 3RS cuts are the latest addition to the existing PFERD range. They are not intended as substitutes for our proven standard cuts for general-use burs.
|
|
| ... products without technical information |
| |
|
|
Milling tools
