Steel milling cutters

... complexities of machining turbine blades. The new WMP45G grade, available as round indexable inserts for the F2334R copy milling cutter, was conceived specifically for face milling ...

... -coated grades (WKP25S and WKP35S) for steel and cast iron machining - 3 PVD-coated grades (WKK25S, WSM35S and WSP45S) for steel and cast iron machining, for machining ...

Diameter : 24 mm - 160 mm

... Xtra-tec® F4080 octagon cutter is equipped with 8 cutting edges per insert and has zero limitations in any operation. This cost efficient product is an ideal tool for face milling, bore ...

Diameter : 0.3 mm - 200 mm
Rotational speed: 10,000 rpm

... quality and demanding milling technology is needed. It features high quality milling cutters with excellent efficiency and durability with great surface quality. The CrazyMill Cool ...

Diameter : 4 mm - 20 mm

... process is determined by the cutting speed and feed rate. To achieve significantly faster machining times despite these parameters, the number of cutting edges must be increased. We have ...

Diameter : 20 mm

For machining steel to 1200 N/mm² tensile strength, stainless steel, cast materials and titanium alloys. For producing large thread diameters ≥ 24 mm in line with the ...

Diameter : 0 mm - 38 mm

The JEL thread milling cutter are spiral fluted tools made out of solid carbide typically applied in threads ranging from 20.0 millimeters in diameter. It is known for its sturdiness and effortless running. The ...

Diameter : 25 mm - 125 mm

... Square 6™ small milling cutter developed by SECO utilizes the Duratomic coating technology making it usable for a wide variety of milling operations. This milling cutter ...

Diameter : 40 mm - 500 mm

QUATTROMILL - INSERT SIZE 12 Cutter range 40-500 mm (1.5-8 inch) Max depth of cut 6 mm (0.236 inch) Recommended depth of cut 4.5mm (0.177 inch) 4 cutting edges, single-sided inserts

Diameter : 50 mm - 160 mm

FACE MILLS - NEAR90 - INSERT SIZE 12Cutter range 50-160 mm (2-6 inch)Max depth of cut 9 mm (0.354 inch)Recommended depth of cut 6 mm (0.236 inch)8 cutting edges, double-sided inserts

Diameter : 40 mm - 160 mm
Rotational speed: 6,000 rpm - 23,000 rpm
Length: 40 mm - 63 mm

The face milling cutter PFK88-SN is the milling system for rough milling when it comes to high removal rates, even in rough operating conditions.

Diameter : 0.2 mm - 2 mm

For the production of internal threads from M1. The multi-tooth design permits faster machining and longer tool life than would be possible with a single-tooth tool. Suitable for difficult applications and for high-strength ...

... offered in Jet-Cut geometry for applications in steel or cast materials and in TiNox geometry for applications in stainless steel materials and several alloys. Both types are available in three cutting ...

... geometries to support operations in a wide range of materials. Geometry F is for stainless steels, super alloys and low carbon steels, geometry M for steels and stainless ...

... optimised cutting edge for smoother machining. A reduced shank version is also available, enabling access to deep pockets and difficult to access areas. The milling cutter body is ...

... double positive 45° milling cutter, S45OE, is available in diameters up to 200mm and supports internal coolant delivery. Its versatile design allows the same cutter body to be used ...

... 0.5micron, with coatings that depend on the application. This high performance tool offers improved tool life, with maximum cutting speed. Reduced damage susceptibility of the tool results to guaranteed productivity ...

The Powder metal HSS Endmills from Arno Werkzeuge are suitable for use in machining steel, stainless steel, cast materials, aluminum, ...

... also appropriate for steel, cast iron, non-ferrous and light metals. The units provide good outcomes at low cutting speeds. This strong tool is useful for all standard industrial materials, such as ...

Diameter : 3 mm - 12 mm
Length: 57 mm - 83 mm

Diameter : 1 mm - 20 mm
Length: 40 mm - 126 mm

... low-vibration premium tools: 25 % added machining volume is the result of different helix angles in connection with newly developed, stable front cutting edges and peripheral teeth. Additionally, the ...

Diameter : 1 mm - 20 mm
Length: 40 mm - 126 mm

The smallest vibrations during milling have a big impact on surface quality. That’s why the experts at LMT FETTE decided to optimize the cutting edges of the DHC Premium. The result is an extremely smooth-running ...

Diameter : 40 mm - 125 mm
Length: 45 mm - 63 mm

... machine during face milling – with the universal milling machine MultiEdge 45 Double 4. With its 3 special cutting material grades you can achieve new superior performance when you cut ...

... guarantees faster and easier removal of material. Can be used on a wide variety of material e.g. cast iron, steel <60 HRC, stainlees steel (INOX), nickel-based and titanium alloys, copper, brass and bronze.

... end mills for slot milling, finish cutting, deburring, rough cutting, trochoidal milling, profile milling and circumference milling. Karnasch's product range of CNC ...

Diameter : 1 mm - 25 mm

... and every single burr is 100% tested for robustness and safety. Karnasch carbide burrs / rotary cutters enable the machining of steel, stainless steel, ...

Diameter : 3 mm - 32 mm
Length: 52 mm - 133 mm

Diameter : 3 mm - 32 mm
Length: 52 mm - 133 mm

Diameter : 6 mm - 20 mm
Length: 57 mm - 104 mm

Diameter : 50 mm
Length: 50, 100, 75 mm

Product introduction ： HP-MAX Ball End Mill 2-Flute 30 Tool Materials ：Micro Grain Carbide Applicable Work Materia：NAK/HPM Application field ： Application industry covers automobile, motorcycle, engine, aerospace, military ...

Diameter : 1 mm - 12 mm
Length: 100, 75, 60, 50 mm

Product introduction ： HM-MAX Radius End Mill 4-Flute 35° Tool Materials ：Super Micrl Grain Carbide Applicable Work Materia：NAK/HPM、SKD61 Application field ： Application industry covers automobile, motorcycle, engine, aerospace, ...

Diameter : 1 mm - 20 mm
Length: 50, 60, 75, 100 mm

Product introduction ： HM-MAX Flat End Mill Short 4-Flute 35° Tool Materials ：Super Micrl Grain Carbide Applicable Work Materia：NAK/HPM、SKD61 Application field ： Application industry covers automobile, motorcycle, engine, ...

Diameter : 3 mm - 20 mm

... Type W. For machining of soft materials, for example aluminium and non-ferrous metals. Material HSS Co8. Extra high performance high speed steel with good toughness and great temperature ...

Diameter : 30 mm - 50 mm

... . Type N. Material HSS Co8. Extra high performance high speed steel with good toughness and great temperature resistance. It is applicable especially for milling of materials with ...

Diameter : 3 mm - 20 mm

... most demanding applications. It provides excellent result mainly when combined with HSSE-PM steels (ASP 2030). The milling cutters manufactured from this steel are coated ...

Diameter : 1.6 mm - 6 mm

We supply quality made in Germany burs in carbide, steel in shafts 1.6-2.35-3.0 and 6.0 mm. All shapes available. Special program of long shaft burs.

Diameter : 2 mm - 40 mm
Rotational speed: 100 rpm - 50,000 rpm
Length: 0 mm - 250 mm

MASAM Cylindrical End Mills is focused on the specific diameters and lengths of the working and clamping parts of the tool that are not offered in common "catalog solutions". Cylindrical End Mill is design accordining drawing documentation ...

Diameter : 2 mm - 40 mm
Rotational speed: 100 rpm - 50,000 rpm
Length: 0 mm - 250 mm

... delivered to our customers based on the final workpiece shape with the individual tolerances that need to be met with the cutting tool. Based on the customer request MASAM prepares tool design and the technological process ...

Diameter : 2 mm - 40 mm
Rotational speed: 100 rpm - 50,000 rpm
Length: 0 mm - 250 mm

Spherical and Ball Nose End Mills MASAM are generally intended for milling of free form surfaces. Using of MASAM Spherical and Ball nose end mills is to the specific diameters and lengths of the working and clamping parts ...

... Advantages Provides a 25-50% increase in tool life over the competition Increased strength and rigidity when cutting forces are applied Standard cutting lengths accommodate multiple applications without ...

... affordable price One tool can cut right and left hand threads Increased strength and rigidity when cutting forces are applied Standard cutting lengths accommodate multiple applications without ...

Diameter : 6 mm - 20 mm
Length: 57 mm - 104 mm

Diameter : 6 mm - 20 mm
Length: 57 mm - 104 mm

Diameter : 6 mm - 20 mm
Length: 57 mm - 104 mm

Diameter : 10 mm - 125 mm
Rotational speed: 15,500 rpm - 85,000 rpm
Length: 25 mm - 250 mm

The 7690VA series milling cutters are ideal for roughing, semi-finishing, and finishing applications in steel, stainless steels, cast iron, high-temperature ...

Diameter : 1 mm - 12 mm
Rotational speed: 1,900 rpm - 60,000 rpm
Length: 50 mm - 110 mm

... flute ball end mill for high hardened steel processing. On high-hardened steel processing, to achieve even longer tool life. Highly efficient cutting with 4 flutes. Special edge ...

Diameter : 16 mm - 40 mm
Length: 31.75 mm - 205 mm

The economical yet efficient DR-TWIST line provides a near perfect solution for machining large diameters when powerful machinery is not available.

Diameter : 80 mm - 400 mm

Thanks to the construction of the cartridge pocket, the cutter body is extremely well protected and consequently achieves long tool life. Should the insert seat be damaged when using the MaxiMill 260, only the cassette ...

Diameter : 13 mm - 32 mm

Unique iLock™ insert seat interface CoroMill® 415 with iLock technology is a reliable and secure solution, resulting in less scrap workpieces. The iLock insert seat also makes the small inserts easier to handle.​​

Diameter : 40 mm - 100 mm

... carbide side milling cutters in the HPC machining range. Use as a set: Cutters with the same ⌀ and same number of teeth can be combined as a set and adjusted to the required ...