|
|
| Products 91 to 120 of 308 |
The new F4080 octagon cutter with eight productive cutting edges per insert has no limitation with regard to the application type and it makes no compromise in terms of quality.
It is particularly convincing when plunge milling cast iron and steelwork components as well as in the chamfering or circular interpolation milling of stainless, difficult-to-machine or non-ferrous materials.
Walter octagon cutter F4080
Best tool for surface milling, plunge milling, chamfering, bore milling and circular interpolation milling
Maximum productivity due to 8 cutting edges per insert
Complete range of geometries and grades for machining all kinds of materials
Walter face milling cutter F4033
Extremely stable indexable inserts thanks to the negative basic shape
Soft cutting action due to the extremely positive insert geometry for maximum productivity
8 cutting edges per insert
|
|
M1200 Face Mills
- Gain up to 30% more productivity with less horsepower.
- Get up to 50% longer tool life.
- Lower your cost per edge with 12 true cutting edges on the insert.
- Run at higher speeds and feeds with high metal-removal rates.
|
|
The new SMAX face mill line featuring the DPM434R (18MM long) insert series is now available in both 0 degree and 45 degree lead angle versions.
The 0 degree lead generates true square shoulders to allow shouldering
and multiple Z-axis depth milling passes. The 45 degree lead allows for
higher chiploads and feedrates.
|
|
Face Milling
Kennametal has one of the largest ranges of face milling cutters, including the grades and geometries to suit all the materials.
KSCM Alu Mill
Productivity booster in aluminum face milling
KSOM
Best productivity in face milling
KSOM Mini
A new dimension in face milling performance
|
|
Face Milling Cutters
- Twincut Face and Copying Milling Cutters 45° and 90°
- Face Milling Cutters 90° with Twincut geometry
- Univex Face Milling Cutters 90°
- Face Milling Cutters 90° for ISO Indexable Inserts
- Twincut VA Face Milling Cutters 45°
- Face Milling Cutters 45° for ISO Indexable Inserts
|
|
|
|
|
|
The name of the game is to keep you 'at the cutting edge'. Your productivity depends on things like reduced cycle times, quick insert indexing, higher metal removal and consistent quality.
Seco Tools offers seven different face milling families - each with its unique feature and capability regarding productivity. They are:
HEXAMILL
When stronger inserts and higher feed rates are needed Seco Tools has one of the widest and most competitive ranges of face milling cutters and inserts on the market.
QUATTRO MILL
Simplify your general purpose face milling applications with Quattro Mill and get the added benefits of increased productivity, ease of use, reliability and greater precision.
DOUBLE OCTOMILL
R220.48 Double Octomill is a face mill for general cast iron milling applications.
R220.44
R220.44 is ideal for machining cast iron when an extremely high metal removal rate, as well as extensive tool life, is a requirement.
R220.30 CUTTERS
R220.30 cutters are intended for the finishing of cast iron, nodular iron components and high quality surface finish demands.
OCTOMILL 05 & 07
With one of the most comprehensive ranges of face milling cutters on the market, Seco Tools stays competitive with Octomill.
|
|
V590 Square Shoulder Mills
The V590 has positive top-form geometry inserts to create lower cutting forces. The cutters are designed to generate a true 90° square shoulder, eliminating secondary operations saving time and improving efficiency. Coolant through holes on end mills is standard and large chip gullets ensure efficient chip evacuation. The V590 is ideal for ramping and helical interpolation operations as well.
|
|
These tools stand out due to their simple, robust design, their excellent milling performance and quality, as well as due to their high efficiency. They are suited for high cutting speeds and feeds (HSC). The low weight and the few parts mounted simplify the handling.
At the center of the milling head are high-precise PCD inserts which can be adjusted very simply and rapidly.
|
|
General description :
Our SDP Spider Mill is designed for high productivity face milling of gray and ductile cast irons. It is a 90 degree double negative milling cutter with positive cutting insert geometry. Each insert consists of eight cutting edges. A unique positive chipbreaker insert provides less cutting force, more productivity and a longer tool life. Available with ACK100 and ACK200 CVD coated grades.
|
|
CoroMill® 245-18 is a robust cutter with large, thick inserts capable of heavy chip removal rates. This larger version of CoroMill 245-12 widens the choices available and will cover more demanding applications.
CoroMill 245-18 is light cutting making it the power-efficient first choice facemill for most ISO-P, -M and -K materials in the ISO 50 and 60 machining centres. It is capable of milling surfaces with excellent finish – particularly when used with wiper inserts.
Reinforced cutting edges for 6-8 mm deep cuts within a feed range of 0.2 up to 0.4 mm enable the cutter to mill blanks with forging scale and large variations in required depth of cut. Under favourable conditions a max cutting depth of 10 mm is achievable.
CoroMill 245-18 is available in diameters 80-250 mm as coarse, close and extra close pitch for maximum performance in different machining conditions.
|
|
The CoroMill 390 endmill offers precision performance in a class of its own. In many ways, the CoroMill 390 is the first high-precision indexable endmill. Playing in the same league as solid endmills.
The CoroMill 390 produces mirror finish surfaces and true 90° shoulders. Noise and vibration are reduced to a very low level.
|
|
Diameter range from 1.00” – 4.00”
4 indexes without going to a left hand cutter.
Backdrafted relief angle for reduced side pressure in long reach applications.
Utilizes the same inserts as the QuadBore and PowerQuad milling line
End mills equipped with the TopOn adaption for reach flexibility.
All tools equipped with coolant through.
|
|
near net shape %u2013 technology, with tight tolerances and improved grinding allowances
efficient, homogenious submicron tungsten carbide grades
|
|
HOBBING TOOLS
All types of high speed steel hobs are supplied to cut involute gears, splines, serrations and special forms.
The hobs are produced using the latest sintered high speed steels and may be ordered with any of the super coatings now available on the market i.e. titanium nitride, titanium carbo-nitride titanium aluminium or futura the most advanced multi layer coating.
The hobs we supply are manufactured to the same exacting standards as our in house manufactured products and carry the same guarantee of quality and service.
The introduction of this product line now enables us to supply the total tooling necessary for all forms of gear production.
|
|
Twist-Free-Hob
Pre-finished.
Gear-hobbing without twisting.
Deburring.
Three Professionals on one Arbor
Economical face-flank chamfering and gear-wheel-finish with
Fette Twist-Free-Hob and Chamfer-Cut.
- Gear cutting and deburring on one machine
- All tools are clamped on one arbor
- No machine or manual rework is necessary
- Additional machines and tools for deburring are not required with
|
|
The Liebhherr-Verzahntechnik GmbH in Ettlingen is a specialist for the manufacturing of gear cutting tools. The complete equipment program contains the following tools:
Shaping cutter, wafer
Shaving cutter
Hob cutter, form milling cutters
Master gear
Rolling discs, rolling racks
Pressure wheels and deburring discs
Clamping arbors, clamping nuts
Matrices and stamps for chipless gear production
Broaching rings, rack type cutter
Shaping cutter holder
Sharpening machines, sharpening fittings and sharpening service
|
|
Aerostell® advantages include:
- Extended tool life due to sub-micrograin carbide
- Reduced tool inventory of 1:3
- Exceptional wear resistance due to insert hardness, ground surface
finish and edge preparation
- Greater precision and surface finish
- Maximum cutting depth = insert edge length
- Increased machine "up" time
- Lowered cutting forces
|
|
|
Z-Carb End Mills for Ferrous Applications...Reduces Machine Vibration...Improves Dimensional Control...Increases Cutting Depth and Feed Rates...Improves Surface Finish...PATENTED Unequal Helix Geometry.
|
|
Heavy duty end mills
Normal series
- Irregolar division
- Straight shank and drive flat
- One end tooth cutting up to the centre
|
|
2 Flute Square 40° Helix Short Flute
3 Flute Square 40° Helix Short Flute
2 Flute Ball 50° Short Flute / Aluminum
2 Flute 50° Reduced Shank
2 Flute Corner Radius 40° Short Flute
2 Flute Ball 55° Helix
2 Flute Corner Radius 55° Helix
3 Flute Square 55° Helix
3 Flute Square 55° Helix Long
4 Flute Corner Rounding
6 Flute Corner Radius 50° Helix
6 Flute Corner Radius Long 50° Helix
AX Mill - 2 Flute Uncoated
AX Mill - 2 Flute Power Z Coated
AX Mill - Chipbreaker 2 Flute Uncoated
AX Mill - Chipbreaker 2 Flute Power Z Coated
AX Mill - 3 Flute Uncoated
AX Mill - 3 Flute Power Z Coated
AX Mill - Chipbreaker, 3 Flute, Uncoated
AX Mill - Chipbreaker, 3 Flute, Power Z Coated
V4 - PowerA 4 Flute Standard Length
V4 - PowerA 4 Flute Stub Length
V4 - PowerA 4 Flute Long Length
F45, 6 Flute Square End
F45, 6 Flute Corner Radius
|
|
- Premier cutters for high-performance, line-by-line finishing milling.
- Rough, semi-finish, and finish with one tool.
- Highly accurate -- axial runout of ± .0004"; radial runout of ± .0001".
- Three insert geometries for light, medium, and medium-heavy applications
|
|
DHC Roughing-Finishing End mills for highest productivity
Features
- Continous modified cutting edge pitch
- Stable cutting edge geometry with micro cutting edge preparation
- Optimized chip space
- Tough micro grain carbide grade
- Wear resistant and temperature stable PVD coating AL 2 Plus
Benefits
- Higher feed rates
- Higher depths of cut
- Higher metal removal rate
- Roughing and finishing with the same cutter
- Less vibrations
- Better cutting dynamics
- Better chip evacution
- Good surface quality on the workpiece
|
|
|
High Performance End Mills from SGS Tool for tough Mold and Die applications. A wide range of sizes and uses.
|
|
RobbJack Corporation has been a leader in manufacturing "application specific" solid carbide cutting tools for over forty years. We worked side by side with the world's leading machine tool builders to develop this unique series of end mills for high speed machining of hardened metals. We offer expert application assistance at no additional charge. So when you need only the best cutting tools, think of one name: RobbJack.
The RobbJack Advantage
* Reduce Cycle Times
* Increase Part Output
* Improve Part Accuracy
* Reduce Scrap
* Run at Faster Feeds and Speeds
|
|
|
The DM-BN series (Die Mold Ball Nose) was designed for our customers who perform hard milling operations. Advanced geometry, premium substrate, and a heat activated, tool life enhancing coating make up the formula for this tool that is capable of milling high Rockwell material.
|
|
OSG is proud to present our new line of WXS™ End Mills. These new super-coated end mills utilize nanotechnology and are specifically designed for milling at higher speeds and temperatures.
OSG’s patented WXS™ coating has an increased oxidation temperature. This permits higher spindle speeds, leading to faster cycle times. As a result, the increased SFM (surface feet per minute) extends tool life since the generated heat actually improves the surface hardness of the WXS™ coating.
In addition, the optimization of the substrate with the WXS™ treatment on a molecular level increases adhesion strength, thereby decreasing the possibility of chipping.
For more information on any of the WXS™ End Mills, please visit our online catalog:
|
|
|
|
Milling tools
