|
|
Calibrated Leaks are compacted steel powder that is calibrated to reproduce precisely your leak rate.
Calibrated Jets are industrial ruby rings with a calibrated hole drilled in their centre.
Both exist in standard or custom values and come with a calibration certificate which is traceable to international standards.
Calibrated leaks are used for checking calibration and calibrating Leak testers. The leaks are delivered with a certificate of calibration in a protective box,
mounted on a quick connector.
|
|
|
|
|
|
LeakID is the new For Test leak-certified series created for verifying leaks during automated tests.
Employees that use leak identification instruments need to know the calibration of those instruments at any moment, so LeakID is the key element used to verify the calibration. If the instrument recognizes the calibrated leak, it is correctly set.
LeakID is sold with the 1/8” pneumatic connector or with Staubli® male connector. For Test calibrated leak is composed by an element calibrated for the requested porosity (leak scales varying from 10 cc/h to 200 cc/min) and a RFID transponder that keeps all numerical values and time ranges crypted. The main benefit of this new product is the impossibility to introduce human errors during the production process, the ricertificating process and during normal utilization, obviously accelerating the production. Reducing human errors is very important because mistakes made by employees concerning leaks values can bring dangerous valutations about measuring instruments.
An optional “Antenna” module can be added to the ET series, or the EtNet, in order to automatically verify the testing process in industrial enviroinment.
For Test LeakID is made using specific Pressure and Flow values, in order to satisfy, with maximum precision in terms of loss rates, the customer needs.
Every LeakID is supplied with a calibration certificate and a protective package for a correct stockage.
|
|
|
Customers using pressure decay/flow instruments or tracer gas detectors need to be able to present a known leak to the test system, should the leak detector recognise the leak at the correct value then the test system is within calibration.
|
|
In order to answer to the requirements of Quality Control, it is advised to use a Leak Master to verify periodically, with a quick and easy system, the operation of a leak testing equipment.
At a specified pressure, a Leak Master guarantees a certified leak flow rate. Inserting the Leak Master in the test circuit, it turns out very easy to check the efficiency of the test equipment, the mechanical fixture and the connections to the tested parts.
|
|
Portable instrument for micro gas leak detection and for personale safety.
for microleak detection & personal safety (Rivelgas Plus 1 % VOL & EXPEX PLUS)
for gas leak detection & personal safety (Rivelgas Plus 100 % LEL & EXPEX PLUS)
for gas leak detection & personal safety (Rivelgas Plus 100 % VOL & EXPEX PLUS)
|
|
Features:
- Patented TaperSlit™ flow cell - Ensures highest sensitivity while maintaining optimal performance.
- Low noise performance - Updated electronics and uniquely designed optics ensures the best signal-to-noise performance (<5uAU) in the industry.
- Data Rates up to 80Hz - Flexible acquisition speeds for both normal and fast LC separations.
- Simplified performance maintenance - Easily accessible mirrors, interchangeable flow cells and pre-aligned lamps make the 2489 UV/Vis detector easy to operate and maintain.
|
|
|
|
|
|
The TapTone 4000-DSC - Dual Sensor Compression (DSC) system is designed to inspect a wide variety of flexible containers for micro leaks. The design incorporates our patented dual sensor technology and high speed compression belts for improved accuracy and container handling. The system was designed for harsh, wet environments, like those found in the dairy industry. When combined with the optional X-ray sensor, the system can also perform fill level inspection.
X-ray Technology - measures the product fill level in steel, aluminum, glass, plastic and paper containers. An X-ray tube is used to produce a low-energy X-ray beam. The X-ray beam penetrates the side of the container in the area of the fill level. An X-ray detector is positioned on the opposite side of the container to measure the intensity of the beam after it goes through the container. The intensity of the beam is then compared to acceptable energy levels to determine the relative fill level of each container. The X-ray sensor is used to measure both overfilled and under filled products in all types of containers.
|
|
Leakator® Jr.
Measuring only 6 inches in length with a 12-inch flexible probe, Bacharach%u2019s Leakator Jr. is a low maintenance, easy-to-use portable combustible gas leak detector that is capable of pinpointing large and small leaks quickly with absolutely no calibration required. The Leakator Jr. is ideal for pinpointing combustible gas leaks; testing appliances in commercial, residential, and industrial applications; surveying gas pipelines; and inspecting valves, regulators, and meters on gas equipment.
|
|
|
GAS-Mate uses leading-edge technology to detect hydrocarbons and other gases with twice the sensitivity of competing models. Perfect for checking leaks in residential and commercial combustion appliances, such as natural gas- or propane-fired heating systems, or gas pipelines.
|
|
Features
- Low cost and easy to use
- Detects any combustible hydrocarbon gas
- Auto zero when switched on
- Green LED indicates battery OK / power on
- Red LED indicates gas detected
- Audible bleep indicates gas detected
- Supplied with 2 x AA batteries
|
|
|
|
|
|
The simple to use Model 21-070 Gas Leak Detector is engineered for easy, one hand operation of detecting leaks in GC systems or any pressurized gas system in laboratory or industrial locations. The instrument can be operated with little or not training. Simply turn the instrument on, zero, and point the instrument’s thin pencil-tip probe at the area of interest. The probe is designed to reach difficult and confined locations to pinpoint the exact problem location. An LED display visually indicates leaks. An audible alarm also signals a leak. No messy soap solutions. No system contamination. Response time is less than 2 seconds for all gases. Helium leaks of 1 x 10-5 cc/sec are easily detected, as are other gases such as refrigerant leaks of 1.1 x 10-4 cc/sec.
The Model 21-070 features microprocessor control with computer interfacing (optional), selectable sensitivity settings, as well as flash memory for saving various settings, i.e., alarm mode, alarm set-point, alarm volume, peak hold delay, LED brightness, sensitivity, and pump speed. The 21-070 Mini Gas Leak Detector weighs only 1.05 lbs (476 grams) and has a rechargeable Ni-Cd battery. A charger is also included.
|
|
Gassonic ultrasonic gas leak detectors are suited for instant and reliable detection of pressurized gas leaks in hazardous areas. They detect leaks from pressurized gas systems by sensing the airborne ultrasound produced by the escaping gas. This means that the ultrasonic gas leak detectors detect gas leaks at the speed of sound in a detection radius up to 20 meters.
Ultrasonic gas leak detectors do not have to wait for gas to accumulate into a potentially dangerous gas cloud and come into physical contact with the sensor. They instantaneously raise an alarm if a leak is detected. Ultrasonic gas leak detectors are unaffected by conditions such as changing wind directions, gas dilution, and the direction of the gas leak - conditions relevant for most outdoor gas installations.
|
|
|
Metrex3, the professional instrument for the detection and localization of gas leaks. Portable, with graphic display, fast and reliable.
|
|
|
The professional instrument for the detection and localization of gas leaks. Portable, with digital display, fast and reliable.
|
|
GasCheck R2pc is designed specifically for the leak detection and measurement of refrigerant and air-conditioning gases including CFC's, HFC's and HCFC's.
The instrument is light weight and handheld enabling the user to locate a leak and to take a direct leak rate measurement in a simple one handed operation.
Robust and reliable, GasCheck R2pc has a choice of display units either as a gas weight loss, gm/yr or as a concentration of gas leakage in air, ppm.
Sourcing a leak is made simple as when a leak is detected above the set alarm level an audible alarm is sounded and an LED flashes leaving the user in no doubt that a leak has been detected.
|
|
|
GasClam can be used below ground for up to three months to measure a variety of gases with temperature, baromeric and borehole pressure giving a true long term profile for the first time! It's truely the definitive method of measurement for most below ground applications.
|
|
HANDHELD NATURAL GAS LEAK DETECTOR
A handheld, light, practical, and highly reliable instrument. The kit includes the device, carrying case, and calibration kit.
A few Advantages
- No moving parts, pumps or filters
- Range of up to 30 meters
- Facilitates verifications in places that are hard to access
- More safety for the operator
- Light and practical
- Reliable and highly sensitive, 5ppm-m
- Does not require calibration gas
Applications
- Pipeline and station verification
- Natural gas distributors
|
|
Gas Hunter
The Gas Hunter is a versatile instrument capable of measuring levels of combustible gas, O2, CO, and pressure.
In the field, the Gas Hunter does the job of seven individual instruments to optimize technician efficiency in leak survey operations and customer service calls. It is able to sniff out combustible gases from part per million levels to 100% by volume through auto-ranging. But there's more. The Gas Hunter is also able to measure the levels of %O2 and ppm CO, and measure pressure in the range of 0.0 to 27.7 inH2O.
|
|
|
LumaSense's SF6 Leak Detector offers an unmatched combination of performance and convenience. Based on the company’s Photoacoustic Spectroscopy (PAS) technology, the system offers highly accurate, reliable and stable quantitative gas analysis and detection. The growing environmental requirements and pressures regarding the use of SF6 make LumaSense’s system a coveted tool designed for everyday use.
|
|
|
Special vehicle for gas detection, equipped with a selective infrared-system. Computer controlled system through user-friendly Huberg software for Windows. Detection of methane with infrared laser-system. A GPS system allows the localization of the vehicle during detection.
|
|
The ASM Graph series not only provides you a touch screen graphic display with colorful screen and graphs. You can now visualize and record the evolution of the helium signal, the inlet pressure and set points via color graphs. Furthermore, you can enjoy the touch panel for quicker parameter settings, check the pressure inside the mass spectrometer or follow the status of the leak detector main components by enjoying the dynamic vacuum diagram.
Main features:
Basic and Advanced modes « Measurement function
Zoom function
Screen copy
Dynamic vacuum diagram
Recording capability « ASM downloader
|
|
|
|
|
|
Advantages to the User
- Lowest detectable leak rate
- Short He recovering time condition
- Quick start-up
- Extremely fast response time
- Oil-free gas admission system
- One of the smallest helium leak detectors in the world
- High sensitivity
- Fast leak rate readout also at low leak rates
Typical Applications
Leak tests in connection with
- Quality assurance
- Automotive industry
- Analytical instruments
- Systems manufacture
- Power station engineering
- Research and development
- Semiconductor industry
- High vacuum and ultra-high vacuum
engineering
- Ideal tool for industrial series production testing – in the cooling and air conditioning industries, for example
The PhoeniXL 300 is a portable multi-purpose helium leak detector and equally well suited to both service and series production testing.
Its rugged design and its ease of use make the PhoeniXL 300 to the best selling leak detector in the world.
In connection with the sniffer lines which are available as accessories the PhoeniXL 300 may also be used as a sniffer leak detector.
In connection with a partial flow pump set the PhoeniXL 300 may also be used for the detection of leaks on large vessels.
|
|
|
|
|
|
General description
High Vacuum Technology has been finding uses in increased number of industrial applications. Especially so, in the case of development of nuclear components which calls for a high degree of vacuum tightness and a reliable leak detection method which can detect minutest leak paths.
The technique adopted in this spectrometer and the selection of helium gas as the tracer, compliments each other. Helium is known for its nontoxic, non-hazardous, nondestructive, available plentiful, relatively inexpensive and its presence in the atmosphere is a negligible 5 ppm and has a low atmospheric partial pressure which enables helium to present a low background signal. These special characters enables helium to go through smallest leak paths without effecting parts or process and thus be able to leak detect easily, reliably and economically. The leak detectors can be used for testing and measuring vacuum integrity in products like: Automotive parts, Bellows, Beverage can and food containers, Pressurized fluids, Vacuum packed solids, Electronic Feedthroughs, Electron tubes, Glass to metal seals, Heat Exchangers, Hermetic seals, Medical devices, Nuclear components, Quartz crystal packages, Refrigeration parts, Relays, Semiconductor packages, Transducers, Vacuum Hardware, Vacuum switches and in Systems like Electronic microscopes, Evaporation coils, Freeze dryers, Ion implanters, Nuclear reactors, Vacuum evaporators and Vacuum furnaces.
|
|
|
The INFICON Mobile Helium Leak Detector is designed to meet the most demanding industrial leak detection applications. Providing fast, accurate and repeatable test results, testing flexibility, and high sensitivity in a low maintenance design, it is ready to tackle the toughest leak detection jobs industry can offer. It is optimized to provide quick, accurate results in any application from the leak checking of large vessels and systems to high-cycle, repetitive component testing - 24 hours / 7 days a week - in the toughest industrial environments.
|
|
With its modular design, ease of operation and modern optics, the new SmartTest is setting new standards in vacuum leak detection.
A broad selection of interfaces affords simple system integration. Its minimum service requirements and robust engineering translate into cost advantages for you.
Fast, reliable results, lowest detectable leak rates and short recovery time are what characterize the SmartTest and make it such a powerful and dependable product.
Take advantage of the opportunity for an on-site product presentation at your facility. It’s the best way to experience the SmartTest in action!
|
|
The H520, a new comer in the ATEQ range of Hydrogen leak detectors, is one of the finest gas tracer and leak detector on the market today.
The most cost effective solution when you desire to identify leaks in gr/year or
ppm, equipped with all features for easy integration.
Detection of leaking gas traces
Range: 5 ~ 100 ppm
The part is filled with hydrogen gas 5% in Nitrogen gas,
for localization, the leaking gas is attracted in a suction probe to the sensor
for fine leak detection, the leaking gas is first accumulated in a chamber,
then attracted to the sensor through the suction tube,
Traces of the leaking gas are detected by ATEQ sensor.
|
|
Ultra-fine leak detection method using a mixture of nitrogen and hydrogen
(5% H2 and 95% N2)
- Non-destructive testing,
- Leak detection,
- Sealing control,
- Leak localization,
- Object validation,
- Certification
|
|
|
|
|
|
H2scan’s HY-ALERTA™ 2600 Explosion Proof Area Hydrogen Monitor provides hydrogen-specific leak detection and measurement for hydrogen concentrations as low as 4000 ppm and can be scaled to any concentration up to 5% hydrogen by volume, a range representing 10% to 125% of hydrogen’s lower flammability limit. The monitor is designed for either ceiling or wall mount and has an RS422 capability that extends the interface from the Sensor Module to the Control Module to several hundred feet. H2scan's hydrogen-specific sensor technology has no cross sensitivity to other combustible gases, thus eliminating false positive alarms.
Performance
Hydrogen Sensitivity Range:
0.4% to 5.0% hydrogen by volume
10% to 125% hydrogen lower flammable limit
Accuracy: ± (0.03 x indication + 0.2) percent hydrogen by volume
Typical Response Time: T90 of 60 sec maximum
Ingress Protection: IP66
Calibration Interval: 90 days
Product Life Expectancy: 10 years
Interface Options
Input Voltage Range: 90 VAC to 260 VAC
Input Power: 15 W
Analog Output: 4 mA to 20 mA
Serial Communication: RS422
Relay Contacts: Two programmable 5 A, 250 VDC / VAC
SPDT relays with both normally open (N.O.) and
normally closed (N.C.) contacts
Operating Conditions
Operating Temperature Range: 4ºC to 60ºC
Storage Temperature Range: -40ºC to 50ºC
Calibration Background Gas: Air
HY-ALERTA™ 2600 Includes
Sensor Module
Control Module
Infrared Remote Control
Dimensions
Sensor Module
Width: 13.8 cm (5.4 in.)
Length: 19.3 cm (7.6 in.)
Depth: 13.0 cm (5.1 in.)
Control Module
Width: 13.8 cm (5.4 in.)
Length: 14.3 cm (5.6 in.)
Depth: 14.4 cm (5.7 in.)
|
|
|
|
|
|
H2scan believes that protecting lives means being able to locate and find a hydrogen leak as quickly as possible. With two sensing elements on the same semiconductor die, the HY-ALERTA™ 500 can detect hydrogen leaks as
low as 15ppm and will not saturate or be destroyed when detecting concentrations of hydrogen up to 100%. The flexible cable allows the sensor probe access to virtually all potential leak sources.
Performance
Hydrogen Sensitivity Range:
15ppm to 100% hydrogen by volume
No peripheral equipment needed
Typical Response Time: less than 30 sec
Ingress Protection: IP64 capable
Field Verification/Calibration Period: 1 year
Product Life Expectancy: 10 years
Lithium Ion Battery Performance
Operating Time: 10hours
Charge Time: 4hours maximum with included charger
Operating Conditions
Operating Temperature Range: 0ºC to 45ºC
Storage Temperature Range: -20ºC to 45ºC
Operating Humidity: 0% to 95% RH
Calibration Background Gas: Air
Dimensions
Unit Weight: 2.15lbs, 975g
Total Length: 6.8in.
Total Width: 3.4in.
Depth: 1.4in.
Probe Length: 7.8in.
Probe Tip Diameter: 0.5in.
Probe Handle Diameter: 1.2in.
Coiled Cord Length Retracted: 26in.
Coiled Cord Length Extended: 72in.
Coiled Cord Diameter: 0.7in.
|
|
The portable hydrogen leak detection instrument used for the precise localization of water leaks.
Fast, precise, easy to use, with numeric display
|
|
|
|
Leak detectors
