|
|
5500 Series Pencil Thermocouple
Ideal for Applications Under 900°F (480°C)
Small Diameter Thermocouple with Fiberglass Insulation
Used Extensively for Food Application
Commonly Installed with Compression Fittings
Used in a Variety of Industries
Other products available:
|
|
TC with protective armatures
Against chemically and mechanically harsh environments thermocouples are mounted inside protective armatures. The optimum design depends on the individual application.
The alternatives are straight thermocouples, angular thermocouples (preferred for salt baths, metal melting plants, etc.) and thermocouples with exchangeable measuring inserts.
The protection tubes are made of ceramic or metallic highly temperature-resistant materials. The thermocouples are available in different mounting techniques, e.g. screw-in, weld-in or plug-in, with connection flange, or other.
|
|
|
|
|
|
Thermocouple & RTDs
Tempsens an ISO 9001:2000 company offers a wide range of Thermocouples and RTDs that are reliable, accurate and fast responding.
Tempsens Thermocouples are available as
o Base Metal Thermocouples (Type J, K, T, E, N),
o Noble Metal Thermocouples (Type R, S, B) and
o Special Thermocouples such as Squzeed Thermocouple, miniature sensors, vibration proof sensors, Trilevel Thermocouple, multipoint sensors, high accuracy sensors, Coated Thermocouple, Thermocouples with Thermowells.
Features of thermocouples
- Temperature range -200°C to 1700°C
- Simplex/Duplex/Multipoint configuration
- Protection sheath of SS316, SS310, HRS446, inconel, Monel, ceramic 99.7% Allumina, silicon carbide etc. depending on the application.
Tempsens RTDs Features:
- Temperature range 0°C to 400°C, special sensors upto 850 deg C can be provided
- Accuracy available in class A, B, 1/2,1/3, 1/5, and 1/10 Din
- Wire connection 2, 3, 4
- Outer protection sheath of SS304, SS316,SS310, inconel
- Special RTDs such as Slide shoe RTD, RTD with Thermowells, Vibration proof RTD for DG sets, Bearing & Winding Temperature RTDs are also available.
Application:
%uF076 Power Plant
%uF076 Oil & Refinery
%uF076 Gas Plant
%uF076 Steel Industry
%uF076 Water Lining
|
|
|
|
|
|
Thermocouple Probes ( Model: K Type TPK-xx / T type TPT-xx )
Bead Probe TPK-01
-50 °C ~ 200 °C / -58 °F ~ 392 °F
Bead Probe TPK-01G Glass Fiber
-50 °C ~ 450 °C / -58 °F ~ 932 ° F
Bead Probe TPK-01-40G
-50 °C ~ 180 °C / -58 °F ~ 356 °F wire diameter
40 gauge for measuring of air temperatures. 4ft. wire
Flat Leaf Surface Probe
-50 °C ~ 300 °C / -58 °F ~ 572 °F
for measuring of surface temperatures.
Model: TPK-02A 0.1 mm thickness (measuring point)
2.0 mm width, L: 84mm (Flat leaf) + 930 mm (Straight Cable)
Model: TPK-02B 0.1 mm thickness (measuring point)
5.0 mm width, L: 84mm (Flat leaf) + 930 mm (Straight Cable)
Probe: TPT-01 ( T Type)
-199 °C ~ 200 °C / -58 °F ~ 392 °F
Bead Probe TPT-01-40G ( T Type)
-50 °C ~ 180 °C / -58 °F ~ 356 °F
Immersion Probe TPK-03
-50 °C ~ 800 °C / -58 °F ~ 1472 °F
General purpose needle
type with stainless point head.
Immersion Probe TPK-03S
-50 °C ~ 800 °C / -58 °F ~ 1472 °F
Surface Probe TPK-04, TPK-04L, TPK-04L Surface
temperature probe.
-50 °C ~ 500 °C / -58 °F ~ 932 °F
Fast response probe.
Air Probe TPK-05
-50 °C ~ 600 °C / -58 °F ~ 1120 °F
Fast response probe.
Roller Probe TPK-06
-50 °C ~ 250 °C / -58 °F ~ 482 °F
Fast response probe.
Magnetized Probe TPK -07
-50 °C ~ 250 °C / -58 °F ~ 482 °F
Fast response probe.
Immersion Probe TPK-03XP
-50 °C ~ 800 °C / -58 °F ~ 1472 °F for measuring temperature of liquids, semi solid such as oils, rubbers, plastics, powder, clays, meats, fruits, frozen foodstuffs.
|
|
|
|
|
|
Watlow provides more than 80 years of manufacturing, research and quality for your temperature sensing needs. A tremendous stock of general application, mineral insulated, base and noble metal thermocouples are available.
Watlow’s MICROCOILTM, Radio Frequency Thermocouple Probe (TR)and True Surface Thermocouples (TST) all incorporate isothermal physical principles to achieve superior surface temperature measurement. The isothermal design provides accurate sensing because the areas of the sensor that are exposed to normal process variances are positioned outside the thermal gradient.
Features
Wide temperature range from -200 to 2200°C (-328 to 4000°F)
Fiberglass insulated thermocouples are capable of temperatures up to
480°C (900°F) for continuous operation
Grounded, ungrounded exposed junctions
Same day delivery on millions of products
Custom manufactured thermocouples
Applications
Plastic injection molding machinery
Food processing equipment
Engine and turbine exhaust gas
Semiconductor processing
Heat treating and metals processing
Medical equipment
Aerospace industries
Packaging equipment
Test stands
|
|
|
Tu-Pak® is Athena’s trademark for metal-sheathed, mineral-insulated (MI) thermocouple material. It is a departure from the traditional assembly of tubes, wires and insulators. It has a unit-construction with no replacement parts. Tu-Pak has improved thermal response, greater flexibility and, size for size, it is longer lasting than traditional types.
|
|
PT100 – Temperature probes Part No.: 3173-..
- 4-wire DIN A temperature probe, -50° C..+120°C
- Screw-in probe R1/8", stainless steel
- Sensor diameter 3 mm
- Sensor length 24 mm
|
|
WORM Flexible Temperature Sensor
Unlike straight temperature sensors, our WORM flexible RTD and thermocouple temperature sensors bend and slide right into a thermowell without having to remove the enclosure or assembly components.
|
|
|
A complete range of thermocouples are available for K, T, J, E, R/S, B, and C calibrations, Handheld, surface, self adhesive, magnetic, wireless, industrial, high temperature and cryogenic manufactured to your specifications or available off the shelf for quick delivery
|
|
Type Designation: CTE
Measuring Range: -100 to + 300 ° C
Common Sensor Types: K,J,N,T,E
Common Insulation : PVC, silicon rubber, PTFE, glass fibre
Common Stranding: 1x0.2, 1x0.315, 1x0.5, 7x0.2, 13x0.2
Common Eye Size: M4, M5, M6, M8, M10, BA sizes.
Tail detail: 50mm tails, 10mm tinned
Application Notes:
Good for high volume manufacture and fixing on to original equipment.
Special Options:
Duplex
Insulated or grounded junction
|
|
Thermocouples can measure temperatures over wide ranges, inexpensively. They are very rugged, but they are not as accurate as RTDs and thermistors.
A thermocouple is basically two strips of wires of dissimilar metals. These metal wires are joined at one end and the voltage is measured at the other end. Changes in the temperature at the juncture induce a change in electromotive force (emf) at the other end. As the temperature goes up, this output emf of the thermocouple rises, though not necessarily linearly.
|
|
ATEX or PED pyrometer assemblies
Different ranges of temperature assemblies specially developed for the chemical and petrochemical industries.
Temperature assemblies with or without thermowell
IP54 to IP67 ingress protection
Simple protection or EEx "i", "e" or "d" safety protection
DAN, DAN V, PSX V type connection head, etc.
J thermocouple from -20 °C to +700 °C
K thermocouple from 0 °C to 1,100 °C
Other types available as an option: T, N, R, S, B, W
Standard material - 316L stainless steel. Various materials and coatings available as an option
ATEX and PED directives: see the ATEX/PED and EMC chapter, on the right-hand side of the home page.
|
|
Predection tube Form AM, AK, B, BM, MA
Measuring range -200.. +570 up to -200... 1600 °C
Connection G1/2, sliding flange
Material of predective tubes steel, st. st., ceramics
Sensor FeCu-Ni, NiCr-Ni, class 2
Option head mounted transmitter 4-20 mA
|
|
- Thermocouple Type J, K, S
- Protection tube made from heat resistant steel
- or from ceramics
- Easy transmitter mounting in high doomed connection head
Applications
Dryer, heater,
Recuperators
Boiler, Energy
Chemical engineering
Combustion processes
up to 1600 °C
Main attributes
Rugged
Meets DIN EN 60 584 for thermovoltages
Class 2
Long duration
Various sizes
|
|
Thermocouples Pt 100, DIN EN 60751
Model 42-Pt 100
|
|
Since 1984 B&B Thermo-Technik develop and manufacture successfully temperature probes.
New ideas were always a reason why B&B is one step further than its competitors. Our customers are the focus of our thinking and acting. For them we investigate, analize and realize almost everything in the temperature measurement.
Just send us your inquiry and we will supply you with an detailed offer and the solution for your measuring problem.
A range of standard sensors you will find in our Online-Shop:
www.temperature-shop.eu
There you will also get more information about our range of temperature measuring technics:
- Temperature / Humidity Sensors
- Thermocouple Connectors
- Digital Thermomters
- Infrared Thermomters
- Stationary Pyrometers
- Controllers
- Data Loggers
- Hygrometers
- Transmitters
|
|
|
|
|
|
Thermocouple Assemblies - Components and Descriptions
Conax Technologies thermocouple assemblies represent the culmination of 50 years experience in the design and manufacture of temperature sensors. Conax Technologies thermocouple designs have proven their durability and reliability in applications ranging from large industrial processing plants to highly specialized laboratory testing and validation. Our extensive knowledge of the science of temperature measurement and the physical properties of materials used for sheathing and insulation enables our sales engineers to recommend the most effective solutions to your application needs.
Conax Technologies thermocouple assemblies offer a wide variety of termination styles and mounting fittings, as well as extensive choices in sensor calibration, sheath diameter and sheath material. This section outlines the key choices needed to specify the correct Conax Technologies part description for your needs. In each case, you will be asked to select the:
*sensor calibration
*sheath material and size
*tip configuration
*termination style
*optional mounting configuration
*sheath length
If at any time you require assistance, call 1-800-223-2389.
|
|
In oder to meet with all applications, this new range is composed of thermocouple probes with connection head, heat resisting steel sheath, mounted on cable or malleable mineral insulated, with a measuring range from –40 to +1100°C.
The new range is also composed of Pt100 probes with standard connection head, threaded compression fitting, contact, ambient end, for food industry, penetration and with a measuring range from –40 to +400°C.
A large choice of accessories ( mounting brakets, compression fittings, connectors, cables ….) and converters offered by KIMO allow you to enlarge thermocouple and Pt100 working conditions.
Join our distribution network all over the word....Contact us !
|
|
- Tip-sensitive (260°C) feature fast-responding copper tip in stainless sheath.
- Mineral insulated (600°C): Stable and rugged for demanding industrial environments.
- High temperature (850°C): Laboratory grade precision in an industrial probe.
- Diameters options include 0.125", 4 mm, 0.188", 0.215", 6 mm, 0.250"
- Single and dual elements
- Wide selection of adjustable fittings, thermowells, and connection heads available from stock
- Cut-to-length option lets you adjust probe length in the field
|
|
K, T, J and E Thermocouple Types
Made from Class 1 Tolerance Wire
PFA Insulation. (max. 260°C)
Kapton Insulation (max. 315°C)
Glass Braid Insulation. (max. 480°C)
1 and 2m Lengths Standard
Max Service Temp for Connector Body 220°C
|
|
Magnetic surface thermocouple
Magnetic surface probe
Calibration Type K.
Measures surface temperature of ferrous materials such as bearings on induction heaters.
Magnet diameter Ø 14mm.
Response time 7 sec.
Maximum temperature at tip 220°C
|
|
|
|
|
|
Conax Technologies' thermocouples for this application meet the operational and performance requirements per the OEM specifications as replacements on heavy duty gas turbines. These cost effective thermocouples are designed to be hermetically sealed to provide a more reliable product that eliminates IR failures. The positive stop at the tip of the thermocouple eliminates any fretting problems. Conax's wheelspace, disc cavity and C.D.T. thermocouples are manufactured using a stainless steel sheath, MgO insulation with type K conductors to ensure the robust design needed in this application.
All specifications qualified thermocouples are manufactured from ASTM E585 thermocouple material utilizing the highest purity insulation materials yielding superior insulation resistance at elevated temperatures. The thermocouples are manufactured and tested at various points during the manufacturing cycle, ensuring the highest possible level of quality.
Production testing includes helium leak testing, calibration, thermal shock, insulation resistance and hermeticity testing of sealing points. Conax Technologies also manufactures these type thermocouples using other configurations. Simply supply the drawing number you have and utilize our short cycle turn around time.
The Wheelspace thermocouples, like all of our products, are manufactured in the United States of America.
|
|
Retrofit Exhaust Gas Sensors for older frame 5, 6, 7 & 9.
If you have an older GE Frame turbine we are offering improved replacement exhaust gas thermocouple sensors that fit older radiation shields with base GE P/N's 351A3711, 238A7864, 219B6376, or 205B3060. This upgrade kit provides a longer lasting sensor that also features lower maintenance time at change out. There is no need to replace the existing radiation shields when using this upgraded exhaust gas sensor.
Product Features and Benefits
*Superior Quality
*Hermetically sealed for high accuracy and long life
*Simple quick installation saves time
*Talented technical support
Cable assemblies that are purchased with this sensor may be manufactured to the customer desired length. Cables remain fixed in the Turbine hot box and only the sensor needs to be removed. Cable assemblies are made from 18 Awg stranded conductors with PFA insulation and are jacketed with Stainless Steel overbraid.
|
|
| ... products without technical information |
| |
|
|
Temperature sensors: Thermocouples
