Temperature: 0 °C - 60 °C
... all environmental conditions, with an integrated T-type thermocouple temperature sensor, outstanding durability and accuracy. The MT-052-T Temperature Sensor has an integrated T-type thermocouple (copper-constantan) ...
Temperature: -45 °C - 700 °C
The DLC Dynamic Load Compensation Systems is yet another state of the art innovation within temperature calibration. The DLC compensates for the negative effect on calibration accuracy that heat exchange between a dry-block calibrator and the sensor-under-test ...
Ametek Calibration
Temperature: -100 °C - 700 °C
The STS Reference Sensors are Pt100 reference probes used as the reference instrument to verify true temperature in any type of hand-held, liquid bath, or dry-block calibrator. Use directly in custody transfer application where high accuracy means money. ...
Ametek Calibration
Temperature: 0 °C - 1,600 °C
... The 1100 Series Industrial Temperature Sensors are straight type thermocouple assemblies made for high temperatures up to 1600°C. Each sensor is encased in protection tubes in heat resistant steel or ceramic. Manufactured with quality ...
Ametek Calibration
Temperature: 750 °C
... Thermocouple type k suitable to detect the temperature of ovens. Thermocouple Cr-All Ø 6 x 150 mm U.T. Compression fitting thread 1⁄4” Gas Cable compensated type K 2 x 0,22 mm² insulated Type ...
... The TPK-04 is a thermocouple probe while the TPK-04S is a surface probe. These thermocouples are typically used to measure the surface temperature of miniature electronic components. The TPK-04 is capable of measuring ...
Tecpel Co., Ltd.
Temperature: -50 °C - 800 °C
... TPK-03 Immersion Probe Type K Thermocouple Probes ☆ -50℃ ~ 800℃/-58℉ ~1472℉ General purpose needle type with stainless round head. ☆ For measuring liquid or gel TPK-03S Short Type Immersion Probe Immersion ...
Tecpel Co., Ltd.
Temperature: -50 °C - 500 °C
... K Type Temperature Thermocouples with TPK-04L / TPK-04LS product IDs are designed for various applications. The TPK-04LS features 90 degree short angle surface probe. Its temperature range is -50 ° C to 500 ° C (-58 ° F to ...
Tecpel Co., Ltd.
Temperature: -50 °C - 150 °C
... conditions found in modern pharmaceutical autoclave chambers. Available in PT100 (Class A, AA and 1/10 DIN) or Type T thermocouple formats, and in a range of custom and stock sizes to fit any autoclave. Each Steriprobe® benefits ...
Thermal Detection
Temperature: -50 °C - 150 °C
... ideal where access is limited. Available in either PT100 formats, to class A, AA and 1/10 DIN tolerances, or type T thermocouple. Probe dimensions start at 3mm diameter, any length and with an optional chisel tip for piercing bottle ...
Thermal Detection
Temperature: -80 °C - 150 °C
... Probes are available in a range of sheath diameters and lengths, and with either PT100 or PT1000 in class A or B, or Type T thermocouple formats. ...
Thermal Detection
Temperature: -200 °C - 1,350 °C
... Below are descriptions of the types of thermocouples made by UE. Type J The Iron – Constantan J curve thermocouple is the most widely used thermocouple. It is versatile and relatively low cost. The ...
United Electric Controls
Temperature: -40 °C - 400 °C
... Temperature range - -40÷400°C Measuring element - platinum resistor Pt100 thermocouple Cu-CuNi (T) thermocouple Fe-CuNi (J) thermocouple NiCr-NiAl (K) Measuring element class - 2 (B) Measuring ...
Temperature: 0 °C - 1,300 °C
... commonly used as a reference standard to calibrate industrial thermocouples. All thermocouple wires and parts are specially cleaned and annealed before assembly. Every AM1210 thermocouple is fully ...
Additel Corporation
Temperature: -75 °C - 1,000 °C
... wide range of versatile K and T type thermocouples for use with the USB TC-08. In addition, we stock a broad selection of high accuracy PT100 RTD probes for use with PT-104 temperature logger. The Type K thermocouple ...
Temperature: 0 °C - 1,200 °C
... The standard temperature sensors are mainly used with temperature calibrators to make it easier to calibrate a temperature sensor by comparing the value reported by the latter with the reference value indicated by the standard sensor. Using a standard ...
Temperature: -50 °C - 450 °C
The surface sensor is attached to the workpiece with a magnetic clamp and can detect surface temperatures of up to 450 °C.
Weldotherm GmbH
... K type thermocouple with miniature connectors for TC-Log logger. It is possible to request other types also. Sensors calibrable by Tecnosoft and the user with the TC-Log software Main features 2 meters standard length With ...
Tecnosoft
Temperature: -65 °C - 700 °C
... -65 to 700°C, duplex insulated - high temperature glass braid, 2mm outside diameter. No connector. Thermocouple tolerance: class 1 according to IEC584-2 +/-1.5°C or +/-0.004 x t (which is higher). ...
Temperature: max 800.0 °C
... RTD sensor: up to 400 °C T/C: up to 800 °C custom design ...
Comeco Control & Measurement
Temperature: -20 °C - 50 °C
... The Remote Temperature Sensor 2 Probes is dedicated to temperature measurements in buildings, and transmits data over a public or private LoRaWAN® radio network. Characteristics • LoRaWAN®, Class A • Easy to install and use • 2 remote temperature ...
Temperature: -40 °C - 538 °C
DISTRIMESURE - iMesure
Temperature: 200, 300, 482 °C
Probe diameter: 0.1 in
... Hypodermic Thermocouple Temperature Probe Type T Temperature Probe The sheath of this temperature probe is 4″ long and is constructed with #304 stainless steel. The hypodermic tip is a 16 gauge (0.062″) diameter. The coil-type cord ...
... • Magnet Mount Thermocouples can be utilised on any ferrous metals as an easy means to measure surface temperature of an object • Provide a portable means of surface measurement that takes the hassle out of mounting a surface probe to ...
Temperature: -200 °C - 1,600 °C
... TH Temperature Sensors It is used by many factory because of its simple and convenient temperature measurement. ...
Temperature: -220 °C - 1,750 °C
... and slope correction very fast response time Digital universal temperature hand-held instrument for the use of thermocouples. The high accuracy in signal detection and processing is achieved by powerful sensors with electronic ...
Temperature: 400 °C - 1,050 °C
... Sheathed thermocouple is a temperature sensor that a thermocouple element is inserted into a metal protective tube (sheath) filled with inorganic insulating powders (highly pure magnesium oxide) and hermetically sealed. ...
CHINO CORPORATION
Process pressure: 5, 2 bar
... The TCS580 is an oil-tight thermocouple bearing sensor that measures bearing temperatures on industrial rotating equipment; a key indicator for oil film and bearing health monitoring. Its small sensor tip allows for quick measurements ...
... Simplex, duplex or multipoint thermocouples with grounded, ungrounded, exposed hot junction, and multitude of fitting options. Cold junction ended in bare wires, connector, head or with pot seal and extension wire. Sensors with handle ...
TERMYA MEDIDA Y CONTROL
Temperature: -200 °C - 1,400 °C
... Measuring insert tube:Inconel 600, 2.4816 Thermowell:Steel 446 / Stainless steel 316Ti or ceramics Temperature element: Thermocouple per DIN EN 60584 Fe-CuNi type (J) NiCr-Ni type (K) Pt10Rh-Pt type (S) Pt30Rh-Pt6Rh type (B) Temperature ...
Manfred Jünemann Mess- und Regeltechnik GmbH
Temperature: -40 °C - 1,700 °C
Probe diameter: 15, 20 mm
... A temperature sensor is a device that detects and measures heat and cold by converting the data into an electrical signal. RTDs (Resistance Temperature Detectors) are temperature sensors that use a resistor whose value changes as the temperature changes. ...
the best suppliers