Thermocouples

Temperature: 600 °C

... 600 is made up of AISI 316L stainless steel swagged protective tube,it is available in L1 and Ø length.The J type thermocouple, beaded, in compliance with NF EN 61615 standard that has a wire diameter of 1.6 mm. ...

Temperature: 1,400 °C - 1,600 °C

... a standard beaded S thermocouple assembly with DIN A or DAN connection head output and with no G1/2 fitting. It is compliant with NF EN 61615 standards. It is available as a single model (1TC) or duplex model (2TC). The ...

Temperature: 1,300 °C

The Chauvin Arnoux thermocouple sensors are widely used for measurement and control. It can withstand optimum temperatures up to 1,300°C. The thermocouples wires are insulated with alumina and it ...

Temperature: 0 °C - 1,700 °C

This high-temperature thermocouple with a gas-tight sapphire protection tube has been specifically developed for use in gas reactors. Through the monocrystalline structure, the sapphire protects the precious metal of ...

Temperature: -200 °C - 1,150 °C

The SFKI is a K Thermocouple temperature probe with deformable sleeved contact tip with cable. It has a measuring range of -200 to +1150°C. Thermocouple K class 1 sensor Inconel® 600 contact tip PFA ...

Temperature: -40 °C - 375 °C

Kimo's probe for composts allows measurements in specific environments including grain elevators, straw stocks and compost stocks. It has a measuring range of -40 to +375°C. Lengths from 1,000 mm to 2,000 mm Protection sheath made ...

Temperature: -40 °C - 500 °C

Kimo's SFCSM K is a K thermocouple temperature sensor for measurement of surfaces with moving parts. It has a measuring range of 0 to +400°C. Thermocouple type K Very fast response time Insulated ...

Temperature: 0 °C - 200 °C

... connection: threaded plastic ring - ABS Case - Minimum diameter: 8mm - Measuring ratio: 1:1 (60°) - Linearised as thermocouple K signal Process inputs: Temperature measurement: - Temperature range: 0...200°C - ...

Temperature: 0 °C - 650 °C

... connection: threaded M12 x 1.0 - Stainless Steel - Minimum diameter: 8mm - Measuring ratio: 1:1 (60°) - Linearised as thermocouple K signal Process inputs: Temperature measurement: - Temperature range: ...

Temperature: 0 °C - 650 °C

... connection: threaded M12 x 1.0 - Stainless Steel - Minimum diameter: 6mm - Measuring ratio: 3:1 (17°) - Linearised as thermocouple K signal Process inputs: Temperature measurement: - Temperature range: ...

Temperature: 200 °C - 1,200 °C

... Watlow's trademark for metal sheathed, mineral insulated (MI) thermocouple material, XACTPAK responds fast because the protective metal outer sheath allows use of smaller diameter thermocouple conductors. ...

Temperature: 480 °C

... control of food and metals rely on Watlow thermocouples. Watlow designs and manufactures sensors to meet customers' industrial and commercial equipment needs. Watlow has developed an extensive line of thermocouples ...

Temperature: -40 °C - 1,200 °C

The EXACTSENSE thermocouple from Watlow provides the accuracy, response time and durability required to help manufacturers improve their diesel aftertreatment system performance. This sensor is designed to meet demanding ...

Temperature: -40 °C - 600 °C

Thermocouple (TC) temperature assembly for standard applications • Flange connection • DIN-style based on form 2F, welded multipart thermowell with straight tip • -40…+600°C / +1100°F The OPTITEMP TCA-F13 is a flanged ...

Temperature: -40 °C - 600 °C

Thermocouple (TC) temperature assembly for standard applications • Flange connection • DIN-style based on form 2F, welded multipart thermowell with reduced tip • -40…+600°C / +1100°F The OPTITEMP TCA-F23 is a flanged ...

Temperature: -40 °C - 600 °C

Thermocouple (TC) temperature assembly for standard applications • Flange connection • DIN-style based on form 3F, welded multipart thermowell with tapered tip • -40…+600°C / +1100°F The OPTITEMP TCA-F42 is a flanged ...

Temperature: 500 °C

The TF-MX Series was developed in order to measure melt temperatures quickly and easily for all types of plastics. The temperature sensors are economical and versatile and impress with their robustness and reliability. The rheological ...

Temperature: 500 °C

Temperature Sensor with ceramic isolation The temperature sensors of the TF Series are ideal for exact temperature measurements in highly sensitive medias. The ceramic insulation guarantees a direct reading of the melt temperature. Any ...

... for type K thermocouples Strong crimped plug/cable attachment CLAMP thermocouples clip to non-ferrous components Clamp Surface for measuring substrate temperature Clamp Air for measuring ambient ...

Type K 1.5mm (0.05in) ⌀ mineral insulated for all general furnace profiling applications Nicrobel sheath protects against electrical noise and furnace atmosphere Type K 3.0mm (0.1in) ⌀ mineral insulated for high-temp steel reheat ...

Temperature: 265, 300 °C

... ferrous substrates in IR cure ovens Robust alternative to Adhesive Patch thermocouple, combines easy attachment and fast thermocouple response Magnetic surface + air thermocouples Magnet ...

Temperature: 0 °C - 1,800 °C

High temperature thermometers manufactured by ABB feature varying specifications. One series of models showcases aligned thermocouples (for overall industrial purposes). These thermometers utilize standard ABB temperature ...

Temperature: -196 °C - 600 °C

The ABB TSP100 Temperature Sensor is designed mainly for pipe and tank engineering. It is ideal for low and medium process requirements, main process connections and control systems. It communicates readings through various compatible ...

Temperature: -270 °C - 1,370 °C

The TSM800 multipoint temperature sensor is ideally suited for measurement of process temperatures over multiple locations with a single access point. Typically used in process plant vessels the TSM800 provides a cost effective alternative ...

Temperature: -10 °C - 700 °C

The STS Reference Sensors are Pt100 reference probes is commonly used as the reference instrument to verify true temperature in any type of hand-held, liquid bath, or dry-block calibrator. STS Reference Sensors can be used directly ...

Temperature: -45 °C - 700 °C

JOFRA DLC Dynamic Load Compensation Systems compensates for the negative effect on calibration accuracy that heat exchange between a dry-block calibrator and the sensor-under-test creates. When a sensor is inserted into a dry-block ...

Temperature: -200 °C - 1,820 °C

ProSens is a new series of modern industrial devices, which integrates sensors, converters, meters and controllers functionalities. Using the latest miniaturisation technologies these compact devices are able to be equipped with two independent ...

Temperature: 400 °C - 1,050 °C

Sheathed thermocouple is a temperature sensor that a thermocouple element is inserted into a metal protective tube (sheath) filled with inorganic insulating powders (highly pure magnesium oxide) and hermetically ...

Temperature: -40 °C - 300 °C

This sensor is sheet type thermocouple (K, T) to measure surface temperature, which can be used by directly pasting on the surface of an object to be measured, or pressure bonding. - Quick response. Thickness is ...

Temperature: 900 °C - 1,200 °C

Solidpak thermocouples are φ10 to 22mm large diameter protective tube with the high performance thermocouples that feature high sensitivity, and robustness required in a general industrial sensor. Gap ...

Temperature: -200 °C - 1,050 °C

NEW-FLOW sheath type thermocouple is high précision and reliability measuring température sensor. Technical Data Head Housing: Weather proof; Explosion proof available N, K, E, J, T type available Sensor Dimensions: 01.0-021.7mm ...

Temperature: -200 °C - 1,700 °C

... Diameter: ø4.0~ø6.0mm Insulated Material: Ceramic Working Temperature Limited: -200~1700ºC NEW-FLOW conventional type thermocouple is high précision and reliability measuring température sensor. Technical Data Head ...

Mineral insulated thermocouple with PFA connection cable Th 22 LTV Application NiCr-Ni thermocouple (type K) with PFA connection cable Th 22 LTV. The thermocouple can be assembled ...

Mineral insulated thermocouple with PVC connection cable A 9-022 Application Mineral insulated thermocouple type K, type J or type L with PVC connecting cable can be supplied with a sheath diameter ...

Mineral insulated thermocouple with Besilen (silicone) connection cable A 15 - 022 HT Application As a manufacturer of mineral-insulated thermocouples, we produce all types of thermocouples ...

Temperature: 400, 180 °C

... sensor with hygienic process connection, PT100 output or 4...20mA with cable screw gland or M12 plug / GTL142 , GTL241 Thermocouple Fe-CuNi (type J); NiCr-Ni (type K) ●RTD Pt100, class B ●Surface sensor ●Sensor ...

Temperature: 250 °C

Temperature sensor with hygienic process connection with current, voltage or frequency output / HKT12, HKT30, HKT35 RTD Pt100 Kl. B, fast response, 2-wire; usable as 3-wire sensor ●Protective tube 4 mm, stainless steel 1.4571∅ ●Connection ...

... Compact version for applications with vibrations, with fixed cable or M12 plug connector GTL162, GTL182, GTL261, GTL281 Thermocouple Fe-CuNi (type J); NiCr-Ni (type K) ●RTD Pt100, class B ●Thermowell material stainless ...

Temperature: -40 °C - 1,100 °C

A thermocouple consists of two wires made of different materials that, due to the thermoelectric effect, produce a voltage from which the temperature can be derived. Depending on the desired application temperature, ...

Temperature: -50 °C - 1,100 °C

Temperature Sensors for research and development in the automotive industry.

Temperature: -20 °C - 80 °C

... transmitters…). Measurement accuracy at 23°C : ±0.3°C of MR ±0.3°C Measurement range (MR) : from -15°C to +65°C Probe : Thermocouple Delivered with guide.

Temperature: -200 °C - 1,700 °C

Thermocouple with an insulated measuring point i.e. coil head thermocouples: this specific type has its origin and main field of application in electric motors, generators and transformers industries. ...

Temperature: -200 °C - 1,700 °C

Thermocouples cemented into a metal sleeve already have a high mechanical resistance, and it is easy to install the sensors. The advantage of small dimensions with fast response time is maintained. The sleeve material ...

Temperature: -200 °C - 1,700 °C

Thermocouples cemented into a ceramic sleeve of 3 x 15 mm or of 4.9 x 16 mm, already have a high mechanical resistance, and it is easy to install the sensors. The advantage of small dimension with fast response time ...

Temperature: -200 °C - 1,100 °C

... with miniature Thermo flat connector : Option OT9020FS Thermocouple sheathed sensors FTAxx and FTANxx Accuracy: FTAxx; NiCr-Ni thermocouple, type K, DIN class 1* FTANxx; NiCrSi-NiSi thermocouple, ...

The SOPT and SOTC by Galvatek are temperature probes. They have PT100 and thermocouple J probes. The lengths of the units are based on needed specifications. They are designed with a Teflon® FEP sheath. The probes ...