|
|
|
|
|
|
Integral protection
The US30000 is an On-Line inverter doubles conversion with a transfer time of 0mS. This technology makes it possible to protect all the types of existing loads as well as the applications functioning with a generator.
Parallelization and N+1 Redundancy
The inverters of series US30000 can be easily gone up in parallel (to 8 identical modules of power) in order to increase on the one hand the capacity of the unit, on the other hand to ensure the N+1. redundancy In the event of failure of a module inverter, the system will continue to function without generating problem for the load. The addition of an additional inverter can be made after the first inverter had been already installed.
Communication by fiberoptic
Not to disturb the communication between the inverters assembled in parallel, the choice was made on fiberoptic. In this way, the rate of immunity to the parasites is much higher than with a standard communication.
Automatic, static by-pass without cut
In the event of overload or of incident of the US30000, a device of by-pass automatically commutates without interruption nor cut, the exit of the inverter to the electrical communication.
Correction of the power-factor
The US30000 is equipped in series with a corrector with power-factor (CFP) which makes it possible to carry out energy saving and not to have to oversize a possible generator.
Mode High Output
When the electrical communication provides a power in acceptable tolerances, the US30000 can function in Line-Interactive mode, with an output higher than 98% and one reduced and economic consumption.
|
|
|
Master Plus is an on-line double conversion UPS (VFI SS 111 in accordance with IEC EN 62040-3) with a transformer isolated inverter. Master plus has a compact foot print and high quality output to provide the ultimate power protection for “mission critical” applications: data processing, telecommunications, industrial processes, security and electro-medical systems.
|
|
UPS from 10 to 800 kVA, three-phase requirements, three-phase input
UPS DELPHYS DS from 20 to 40 kVA
UPS MASTERYS from 10 to 90 kVA
UPS DELPHYS MP from 60 to 200 kVA
UPS DELPHYS MX from 250 to 500 kVA
UPS DELPHYS DS 600 and 800 kVA
UPS from 4.5 to 120 kVA, single-phase requirements, three-phase input
UPS MASTERYS from 8 to 12 kVA
UPS DELPHYS DS from 20 to 60 kVA
UPS MODULYS® from 4.5 to 24 kVA
|
|
|
|
|
|
The 90-NET is a three-phase Uninterruptible Power Supply (UPS) available in 60 kVA, 80 kVA, 100 kVA, 120 kVA, 160 kVA, 200 kVA, 250 kVA, 300 kVA, 400 kVA, 500 kVA, 600 kVA & 800 kVA ratings.
Ideally suited for use in data centres.
The family of three-phase 90-NET UPS systems guarantee maximum uptime, reliability, uninterrupted power and flexibility under the most difficult conditions.
Chloride's digital vector control system enables the 90-NET UPS system to eliminate, in real time, all overloads, frequency variations, transient disturbances, brief interruptions and power outage incidents. This UPS family uses modern digital technology specifically related to power supply protection, with intelligent double conversion configuration and is fully compatible with Chloride’s real-time remote monitoring and diagnostic tool, LIFE.net.
These UPS systems are extremely flexible, reliable and 'green', with high conversion efficiency. The 90-NET UPS systems provide the ideal standby emergency power solution.
|
|
|
|
|
|
A three phase Uninterruptible Power Supply (UPS) available in 60 kVA, 80 kVA, 100 kVA, 120 kVA, 160 kVA & 200 kVA ratings, the 80-NET gives the ideal standby emergency power solution.
The range of 80-NET UPS systems combine innovation and maximum flexibility with reduced weight and dimensions, providing both efficiency and security through the use of double conversion and digitally interactive technology. Chloride’s transformer-free 80-NET UPS is environmentally friendly, using 'green' technology to supply an energy conversion efficiency of up to 98% allowing high energy savings and also minimising the total cost of ownership.
The 80-NET UPS system can be fully adapted to meet diverse requirements in terms of battery backup time (autonomy), power, redundancy and harmonic control and is also fully compatible with LIFE.net, Chloride’s real-time remote monitoring and diagnostic tool.
These UPS systems guarantee maximum uptime, reliability, uninterrupted power and flexibility under the most difficult conditions and for a wide range of mission critical applications such as finance, health, transportation, telecommunications, e-commerce and data centres.
|
|
|
|
|
|
An Uninterruptible Power Supply (UPS) available in 10 kVA, 20 kVA, 30 kVA, 40 kVA, 50 kVA & 60 kVA ratings, the 70-NET UPS supplies maximum system uptime with flexible continuous power, under the most difficult conditions and without interruption to the load.
The three-phase 70-NET UPS systems combine innovation with maximum flexibility together with reduced weight and dimensions. The critical load is given full protection through the use of intelligent systems, using software solutions, parallel kits, safety and disconnecting devices, system bypass switches, and communications solutions, while the Vector Control technology enhances performance, providing reliable high-quality AC power and maximising uptime of supported servers and equipment.
The 70-NET UPS systems can meet diverse requirements in terms of battery backup time (autonomy), power, redundancy and harmonic control and is fully compatible with Chloride’s real-time remote monitoring and diagnostic tool, LIFE.net.
It offers the ideal standby emergency power solution for a wide range of mission critical applications such as finance, health, transportation, telecommunications, e-commerce and data centres.
|
|
|
|
|
|
Digital Energy LP Series
CE / UL LISTED
Digital Energy LP 33 UPS 10-30 kVA
The LP Series of UPS products are a high performance platform supplying information-quality power for critical applications. The LP Series is easy to install and service and can be integrated into office environments and industrial applications.
Digital Energy LP 33 UPS 40-120 kVA
The LP 33 Series is a reliable 3-phase UPS system providing critical power protection for a wide range of mission critical applications. LP 33 systems operate in Voltage Frequency Independence mode yielding maximum levels of power reliability.
Digital Energy SG Series UPS 80 -200 kVA
The SG Series provides reliability and performance. With back feed protection and compliance to EMC standards. Reliability is increased by paralleling up to 8 UPS units utilizing GE's unique RPA™ technology (Redundant Parallel Architecture).
Digital Energy SitePro® UPS 10-500 kVA
The SitePro continuous on-line UPS is available in models from 10kVA up to 500kVA. For high-power redundant applications, the SitePro UPS can be installed with up to 8 units in parallel, achieving up to 4MVA providing greater system reliability.
|
|
|
|
|
|
The widest range of three-phase uninterruptible power supply (UPS) systems for continuous availability applications. These ultra-reliable systems are designed for a variety of applications from 10 kVA to 4000 kVA in single, multi-module and redundant configurations. Liebert specializes in true double conversion technology to provide the most reliable power.
Liebert NX UPS - 60/50Hz 10-30kVA is a mid-sized, three-phase UPS system that delivers complete, centralized power protection for mission-critical systems.
Liebert NX UPS - 60/50Hz is a 40-120kVA UPS that offers Softscale™ technology is a true on-line, double conversion, three-phase UPS system that provides a scalable solution for growing data centers. The UPS allows growth from 40 to 60 to 80 kVA, and from 80 to 100 to 120 kVA. The UPS may also be paralleled for additional capacity or for redudant operation.
Npower - 60/50Hz: Npower, the next generation of medium size UPS offers true double-conversion, exceptional reliability, unmatched performance, and high-availability configurations.
Liebert Series 610 UPS - 60/50Hz: High Power, On-Line UPS Protection For Critical Sites Including Computer Rooms, Telecommunications Centers, Industrial Process Control Facilities And Other Locations Housing Sensitive Electronic Systems.
|
|
As the power quality industry's most reliable and comprehensive option in backup power protection and power management, the Powerware 9315 UPS is essential for mission-critical applications such as data centers, server farms, and transportation facilities.
In your pursuit of maximum power quality and availability, the Powerware 9315 UPS power supply is the answer, and can be paralleled for both redundancy and capacity using patented Powerware Hot Sync%u2122 UPS technology. In addition to offering surge protection and backup power, the Powerware 9315 UPS power system delivers full uninterruptible power protection against all nine common problems.
|
|
FEATURES
PRODUCT FEATURES
● Smallest available footprint
● High system efficiency
● Harmonic cancellation
● Transient protection
● High-speed voltage regulation
● Power factor improvement
● Top and bottom cable entry
● 40° C rating on entire system
● Low input current distortion
● Utilizes kinetic power cell technology
● Simple installation
● Low maintenance
● Quiet operation
● Optional redundant energy storage
● Expandable for future capacity growth
● Optional generator set start module
RELIABLE POWER PROTECTION FOR CRITICAL
APPLICATIONS
Cat® UPS systems provide constant power protection
against surges, sags, and power interruptions that
can disrupt operations or cause loss of valuable
data or system capacity. Additionally, the use of
the optional generator set start module can
dramatically increase generator set starting
reliability in a continuous power configuration.
|
|
|
GUTOR's double conversion UPS systems PEW (1phase output) and PDW (3phase output) basically consist of a rectifier, batteries, an IGBT inverter, a static and manual bypass switch. The systems can be sized and configured according to specific customer requirements considering crucial factors.
|
|
|
|
|
|
DPA UPScale ensures optimum availability for critical applications by combining
modularity and decentralised parallel architecture or DPA. The modular concept allows you to purchase power protection technology on an on demand basis and keeps the purchasing and operating costs of power protection solutions exceptionally low. The DPA architecture delivers a redundant protection without “single point of failure”. With all of the critical components duplicated and distributed between the independent modules, system uptime is maximised. The DPA UPScale has been designed in two versions:
• DPA UPScale ST (Standard) including frame, UPS, battery and communication.
• DPA UPScale RI (Rack-Independent) UPS, battery and communication which can be
integrated into any 19” rack.
DPA UPScale ST: Designed for high-density computing environments, the DPA UPScale ST delivers power protection from 10 kW to 120 kW (1 to 6 modules). The powerful configuration offers a solution with maximum power density of 272 kW/m2.
DPA UPScale RI: The rack-independent DPA UPScale RI (subrack)is designed to be the most versatile UPS on the market and provides the best technical and commercial solutions to meet individual power protection needs. The rack-independent solution is a standard product which can be integrated
into any 19” rack.
DPA UPScale features:
• Intelligent, self-contained modules
• Modules of low weight (10kW = 18.6kg; 20kW = 21.5kg)
• Total compatibility with any installation
• Excellent input performance
• PF > 0.99
• THDi < 3%
• AC-AC Efficiency 95.5%
• Transformerless
• Online double conversion technology
|
|
PMC provides innovative protection against power supply problems. Through the combination of modularity (scalability and redundancy) and distributed parallel architecture (DPA), it guarantees maximum availability for critical applications. Thanks to the modular DPA system architecture, it is possible to expand capacities and stored energy times without interrupting operation.
Maximum availability
The "n+1" system architecture means that there are always at least two modules able to share the critical load. If any module should fail, the other modules automatically take over the whole connected load without interruption.
Integration of up to 3 modules in the IT rack or separate battery enclosure
Modules can be retrofitted on a hot-swapping basis, without needing to switch the system to a bypass. Stored energy times can be tailored to the individual application.
|
|
Features:
Double conversion.
Continuous battery charger and inverter for primary power path.
Constant battery connection to inverter and load.
Guarantee full power operation during power failure.
No voltage drop and zero transfer time.
Light weight unit.
Hot-swappable battery.
User-friendly graphic LCD.
Benefits:
Flexible mounting orientation that allows tower or rack mount configuration
User-friendly and rotatable graphic LCD for easier troubleshooting
Patented hot-swappable and interchangeable single voltage battery pack design
Light weight unit
User-remote interface that includes SNMP/HTTP card, RS232, USB, DB9, and AS400 interface.
|
|
Uninterruptible Power Supply USV24/16
The USV module provides the uninterruptible power supply of the 300 and 1400 series IPC. Important data can be stored reliably and the system can be shut down in a controlled manner. The communication between the UPS module, IPC and the running application program is implemented via a serial interface and the UPS tool running on Windows. In the event of a power failure the bridging time of the maintenance free battery starts to run down. As soon as the UPS's charge falls to 10%, the application is notified immediately of the critical state and the programs are systematically shut down. The system is not shut down if the power supply is restored before the bridging time.
|
|
The ONEAC ONm® range provides a high performance solution for the medical environment. It has a built-in isolation transformer to eliminate electrical noise and limit earth leakage, ensuring patient safety and attached equipment is unaffected by the electrical enviroment and does not degrade over time.
Medical grade ONEAC ONm power conditioned UPS (UL60601-1/IEC60601-1) are available in 120/230 V, 50/60 Hz, 300 - 600 VA (single-phase). The ONEAC ON Series m UPS family features basic communications and an isolation transformer for premium power conditioning and battery backup protection. Its IEC60601-1 listing makes it suitable for patient contact applications in global medical/healthcare applications.
|
|
Digital Energy™ LP 31 UPS 8-20 kVA
The LP 31 Series of UPS comprises a comprehensive and high performance platform supplying information-quality power for your critical applications. The UPS is easy to install and service and suits a variety of applications and environments.
Digital Energy™ LP 31T UPS 5-10 kVA
The LP 31T Series of UPS is a comprehensive and high performance platform supplying information-quality power for critical applications. Based on the LP11 design, the UPS is easy to install, service and suits a variety of application environments.
|
|
|
The device that maintains continuous power supply even on the absence of mains power supply is called UPS or Uninterrupted power supply. This is usually connected between the main source and the working system. It switches from the mains power supply to the battery power instantaneously whenever there is a fault in the mains power supply or the power supply is not there at all. It is generally used to protect typically computers, telecommunications equipment, and other electrical equipment where there is a chance of power failure. UPS are available from 200VA onwards to large systems which can support the power supply of multistoried buildings. It is typically the need of all data centers, and computer network systems. Sometimes in large systems it is used in conjunction with generators but it is not to be confused with standby generators. UPS are used for short and instantaneous power supply needs though for longer terms it may be used with a generator.
|
|
Eaton's comprehensive range of Powerware UPS solutions have been protecting mission-critical operations since the days when a mainframe needed its own room. That's over 40 years of experience in the power quality and backup power protection industry. The result is an expansive product line with advanced solutions for any application, from desktops to data centers.
Powerware solutions include UPSs ranging from 300 VA to more than 4,000 kVA as well as DC Power Systems to suit any application. Our award-winning software and connectivity devices incorporate all the features you need to proactively manage your systems, from basic monitoring and shutdown to predictive analysis and power management. Powerware Integration Services offers complete solutions tailored for the specific requirements of federal, telecom, and commercial markets. But whatever your industry, Powerware solutions deliver the answer with customized power management solutions backed with 7x24 Service support.
|
|
The DIALOG DUAL range is available in 3.3-4-5-6-8-10kVA single-phase models and 6.5-8-10kVA three-phase/single-phase models, with on-line double conversion (VFI) technology.
The DIALOG DUAL range may be placed directly on the floor or mounted in 19” rackmount cabinets such as the Multi Shelter range.
In terms of technology, features (selectable On-line, Economy and Smart Active operating modes), and diagnostics such as the digital display, RS232 and USB interfaces, network adaptor card option and PowerShield2 software include. DIALOG DUAL is easily the best solution for protecting "mission critical" applications requiring the highest levels of reliability.
DIALOG DUAL is ideally suited for a whole range of applications from IT to security.
|
|
MULTI PLUS is ideal for the protection of critical information and
telecommunications networks which cannot run the risk of being powered
from a poor quality electrical supply.
The MULTI PLUS series is available in 10-12-15-20 kVA three-phase and
single-phase input and single-phase output models, and 10-12-15-20-30-
40 and 100-120 kVA three-phase input and output models, with double
conversion on-line technology according to the VFI-SS-111 classification,
as defined by the IEC EN 62040-3 standard.
Multi Plus has been designed and manufactured using state-of-the-art
technologies in order to deliver maximum protection for critical users, a
zero impact on the mains power supply and a high operating efficiency.
The high level of flexibility at the design stage means that there is full
compatibility both with three-phase power and with single-phase sources,
thus eliminating any critical factors in the connection between UPS and
system.
|
|
Power Dialog 3 (5-10 kVA)
Power Dialog 3 is the ideal solution for powering vital mission critical, sensitive loads such as electro-medical security applications in order to guarantee maximum reliability and availability.
The series includes 5kVA-6kVA single/single phase and 6.5kVA-8kVA-10kVA single/single phase and three/single phase models and uses double conversion on-line technology (VFI). The load is powered constantly by the inverter which supplies filtered, stabilised and regulated sinewave voltage.
Moreover, the input and output filters increase the immunity of the load against mains power disturbances and lightning strikes.
Power Dialog 3 is without doubt one of the best UPS systems on the market today thanks to the technology used, the features (selectable Economy Mode and Smart Mode) and the diagnostics offered (custom LCD display, RS232 and USB interfaces complete with Powershield³ software, EPO contact and slots for optional interface boards).
|
|
With its weight and size, resembling that of a small book, and featuring flexibility allowing you to position it horizontally, vertically or wall-mounted, the Desk Power range, 300 - 650 VA, represents an ideal solution to protect your information systems or PABX area with no disruption to customer premises.
The Desk Power family is available in 300, 500 and 650 VA and represents the most compact UPS product solution in the marketplace.
Its reduced size and weight allows easy integration into office environments. It can be placed virtually anywhere.
Desk Power comes with both RS232 and USB ports for flexible interaction between the UPS and the protected systems. In addition, it offers data line protection, securing internet and LAN connections.
Desk Power is fully compatible with Chloride’s Connectivity Solutions Suite. MopUPS Express software can be downloaded from the web for a safe system shutdown and UPS monitoring.
|
|
|
|
|
|
GE Digital Energy IT Series UL Listed UPS 600VA - 2kVA
Pure Sinewave Output, Line Interactive Tower and Rack Mounted UPS
The Digital Energy™ IT Series Rackmount and Tower UPS provide cost-effective, high quality power protection for a wide range of 19" Rackmount and Tower mount applications. The IT Series is a line interactive UPS that has pure sine wave output, which prevents downtime and equipment damage due to power outages, voltage fluctuations and transient surges. All GE Digital Energy™ IT Series UPS’s are microprocessor-controlled and equipped with AVR (Automatic Voltage Regulation), making them ideal for server, data storage, networking, telecommunications, and point-of-sale applications.
The units are equipped with RS-232, USB and additional communications slots for add-on accessory communications cards. GE offers a wide variety of SNMP and communication cards to enhance the communication capabilities of the IT Series.
All IT Series UPS’s utilize the GE IT Series MONITORing management and monitoring software. The IT Series MONITORing management and monitoring software has the capability to interface with all of today’s software operating system platforms. The front panel, multifunction audible alarms and set of six (6) LED’s allow for quick visual notification of UPS and battery status.
All IT Series UPS’s have hot swappable, user-replaceable batteries. The attractive design of the IT Series allows for front access, facilitating battery replacement. All GE IT Series UPS units come in an attractive, black color scheme and carry a (2) two-year product warranty.
|
|
|
The affordable, compact 3105 UPS system device was designed to deliver the best UPS power management solution for your small office or home office. Ready to switch to UPS battery power any time it detects a power problem within the utility, the 3105 UPS delivers reliable power quality and UPS backup power for wireless phones, small office PBX or key phone systems, home office workstations, small office desktop servers, small network nodes, point-of-sale systems, and computer peripheral devices.
|
|
|
GUTOR's double conversion UPS systems PEW (1phase output) and PDW (3phase output) basically consist of a rectifier, batteries, an IGBT inverter, a static and manual bypass switch. The systems can be sized and configured according to specific customer requirements considering crucial factors.
|
|
The Powerware 5115 UPS offers excellent backup power protection and power quality management for PCs, small-office-home-office (SOHO) equipment, NT workstations, and small internet-working devices.
Delivering basic surge protection and backup power, the Powerware 5115 additionally offers the best UPS power protection against five of the nine common power quality problems.
|
|
As the power quality industry's most reliable and comprehensive option in backup power protection and power management, the Powerware 9315 UPS is essential for mission-critical applications such as data centers, server farms, and transportation facilities.
In your pursuit of maximum power quality and availability, the Powerware 9315 UPS power supply is the answer, and can be paralleled for both redundancy and capacity using patented Powerware Hot Sync%u2122 UPS technology. In addition to offering surge protection and backup power, the Powerware 9315 UPS power system delivers full uninterruptible power protection against all nine common problems.
|
|
|
|
UPSs
