|
|
Customization is the standard at ELMA. With an extensive offering of modular products as a foundation, ELMA is able to leverage existing solutions and proven design concepts to meet any custom application. This approach insures that ELMA will provide quality, compliant solutions with reduced lead time, cost and risk.
Custom solutions for:
AdvancedTCA
MicroTCA
CompactPCI / CPCI
PICMG 2.16, Gigabit Ethernet
PXI
VXI
VME/VME64x
VITA 31.1, Gigabit Ethernet over VME64x
VITA 46, VPX
VITA 41, VXS
Services:
Custom design
Manufacturing
Characterization & measurements
|
|
Backplane Design
* On-site design reviews with your Engineers
* Full custom backplanes
* Modified Standard backplanes
* Cost-saving re-designs
* Design simulation and validation
* SPICE and HSPICE modelling
|
|
|
GCT specialise in custom connectors allowing you to meet specific application and design requirements and budgets. Our mechanical & electrical engineers have many years of experience assisting in design and development of custom built connectors that, we not only helped our customers addressing their design and application challenges, but also saving much of their money. Whether it's a modification of an existing part or a brand new design, we will assist you all the way.
|
|
SI - Side Interface Board-To-Backplane Connector Overview
In years past, low frequency transmissions could absorb the difference between the connector parameters and the PCB. As data transfers and rise times push into the gigabit range, signal ringing, jitter and edge rate profiles break down the signal quality to unacceptable levels. Side Interface refers to a revolutionary PCB technology. SI allows the inner layers to exit through the actual side of the PCB (represented by the thickness dimension). This provides a flat mating surface for the HXC125 contact. The advantage of this technology is that you keep the signal within the PCB for greater period of time. By staying within the "Controlled Impedance Environment" longer, there is less disturbance to the signal. This short interconnect distance eliminates the large electrical interruption one would see in traditional two piece connectors.
|
|
PLUG AND SOCKET CONNECTOR SAVER D-SUB CONNECTORS STANDARD AND HIGH DENSITY
1. Connector saver D-Sub Adapter plug / socket
Connector saver
D-Sub Adapter
plug / socket
2. Connector Saver High density D-Sub Adapter plug / socket
|
|
The majority of components connected to a backplane are connected using solderless pressfit technology. Two-row power taps featuring either an elastic pressfit zone or soldering termination were developed by ERNI for connecting power supply lines. Cable plugs or terminal sockets can be optionally used for cable termination.
The power taps can either be connected via screw or plug-type terminals with cable lugs or flat terminal sockets. For versions featuring 6 pins, the max. current is 30A at 20°C ambient temperature. Versions featuring 10 pins can withstand 40A at 20°C.
|
|
Series 621 / 622 D-Subs with Filtering
* Attenuation - 20dB min@30mhz, 30dB min@50mHz
Series 621 / 622 D-Subminiature Connector
* 0.109%u201D (2.77mm) contact spacing x 0.112%u201D (2.82mm) row spacing
Series 625 / 626 D-Subs with Deep Body
627 / 628 D-Subs Low Profile Housing
Series 627 / 628 D-Subs Standard Body
Series 627 / 628 D-Subs Extended Body with Filter
* Attenuation - 20dB MIN @ 30Mhz, 30dB MIN @ 50Mhz
634 Series Slim VGA Connector
* High Density Three Contact Rows .079%u201D (2.00) footprint
* 090 (2.29) Contact Spacing x .112 (2.82) Row Spacing
|
|
FCI D-Sub product lines are present in high technology areas :
> communications
> data
> consumer
> industrial
> military
Many styles of termination and performance levels are available and a large choice of accessories completes the range :
> DELTA D
- right angle solder DELTA D
- Straight solder DELTA D
- Straight press-fit DELTA D
- Right angle press-fit DELTA D
> COMPACT D - high density
> Mixed power DW series
> D / 8656 / 8657 / DP series
> Military products
>Accessories
Our continuous improvement programme is focused on:
> manufacturing process control
> high quality level (ISO 9001 approved)
> innovation
FCI is an excellent partner for your connection needs.
For more information : www.fciconnect.com
|
|
|
Amphenol is a global provider of interconnect solutions to designers and manufacturers of internet enabling systems. Amphenol's range of offerings in electrical and optical cable, cable assembly, connector products and backplane interconnect systems span applications in PC's, servers, storage systems, optical and copper networking equipment, modems, hubs, routers, switches, media display systems, and internet appliances. With our design creativity and cost effectiveness, Amphenol leads the way in interconnect development for internet equipment, infrastructure, enterprise networks and appliances. Whether industry standard or application-specific designs are required, Amphenol provides customers with products that enable performance at the leading edge of next generation high-speed technology.
|
|
|
|
|
|
HARTING’s comprehensive D-Sub connector range provides solutions for various applications, including:
* D-Sub - Standard connectors with 9 to 50 straight, right-angled, right-angled low profile or US foot print style contacts.
* D-Sub - High Density connectors with 15 to 78 straight and right-angled contacts, exceeding the contact capacity of the standard Subminiature D connectors by 70%.
* D-Sub - Mixed connectors with nearly 20 different contact arrangements offering versatile options for mixing power, coaxial, high voltage, signal and even pneumatic contacts in one connector.
* D-Sub - Waterproof - IP 67 connectors with 9 to 50 contacts for panel mount to PCB or cable.
* D-Sub - Filter connectors.
Depending on the product family, various termination techniques can be supplied for D-Sub connectors such as press-in, solder, SMC or SMT to match the customer’s termination process.
In addition, a wide range of hoods and accessories completes the D-Sub cable connector range to fulfil all kinds of requirements such as EMC, IP 67 etc.
|
|
|
Available in 9,15,19,23,25,37 and 50circuits Insulator material : glass filled polyester UL 94V -0 contact material : phosphor bronze different plating options are available
|
|
Winchester Electronics offers a comprehensive line of press-fit PCB D-Subminiature connectors for backplane applications that features Winchester's proven, reliable, and industry leading C-Press compliant pin technology.
Winchester's PCB D-Subminiature product line consists of all plastic and shielded vertical mount male and female connectors available in 9, 15, 25, and 37 positions. A variety of hardware options are also available including threaded inserts, threaded standoffs, quick latches, through-holes, and grounding straps.
- 89 Series, All plastic D-Subminiature Connectors
- 189 Series, Shielded D-Subminiature Connectors
|
|
|
|
|
|
ERNI offers three different versions of connector housing for Series TMC connectors ace. To DIN 41 652 and MIL C-24308.
KSG 200 Fully insulated housing with integrated shielding plates
KSG 185 Housing with snap-in latches and/or screw locking, integrated coding
KSG 183 Housing with snap-in latches
All three versions of housing are of two-shell design which allows the wring of the female or male connectors prior to housing assembly. All three housing versions can easily be disassembled.
With the KSG 185 (cable connector housing Series KSG 185) it is possible to lock the two shell halves with snap- in latches. There is also a screw for vibration-proof applications. The connector shell halves of Series KSG 183 are screwed together after wiring.
For applications with screw locking the KSG 185 offers locking parts for thread types M3 and #4/40 NC-2 A.
Features:
Fully insulated housing
Two-shell design to facilitate assembly
Various types of locking such as snap-in, slide and screw locking
Reliable strain relief with strain relief clamp
Cable entry: KSG 200: one 15°entry; KSG 185: sizes 9 and 15, one 75° entry sizes 25, 37 and 50 two 75° entries; KSG 183: size 9, one 90° entry-sizes 15, 25, 37 and 50, three 30° and 90° entries.
Cable sleeves and blind plugs included
All parts needed to mount the housing are supplied
KSG 200 with optimal ESD-protection and high EMI/RFI shielding
KSG 200 with integrated shielding plates
KSG 185 with integrated coding
KSG 185 available in metallized version as well
|
|
The majority of components connected to a backplane are connected using solderless pressfit technology. Two-row power taps featuring either an elastic pressfit zone or soldering termination were developed by ERNI for connecting power supply lines. Cable plugs or terminal sockets can be optionally used for cable termination.
The power taps can either be connected via screw or plug-type terminals with cable lugs or flat terminal sockets. For versions featuring 6 pins, the max. current is 30A at 20°C ambient temperature. Versions featuring 10 pins can withstand 40A at 20°C.
|
|
With Spectrum Advanced Specialty Products’ line of D-subminiature connectors, you’ll be sure to find an EMI filtered connector for every need. With low ground impedance and ground plane shielding, our D-sub connectors are ideal for EMI shielding. Low profile, hi-density and high performance connector options are also available, each with a convenient compact design for better manageability. These D-subs provide high insertion loss with tubular capacitive filtering, and with 100% testing of filters we provide more consistent performance at a lower cost.
• Male-Female adapters available for EMC testing
• RoHS compliancy available
• Drop-in replacements for unfiltered connectors
• Ferrite, Feed-thru and Pi filters
• Compact design with fewer components
• Re-radiation elimination
• Wide array of shell sizes, configurations and terminations
|
|
Mechanical
Bayonet coupling ( “Audible & Visual” coupling signal)
4 mechanical Coding / Polarization possibilities by the user (insert rotation)
Mating cycles : 500 min
|
|
DIN 41651 Flat Cable Connector System
1. Header with straight solder pins - with long, short or without latch :
Header with straight solder pins - with long, short or without latch
2. Header with angled solder pins with long, short or without latch
3. Low profile header with straight solder pins
4. Low profile header with right angle solder pins
5. Socket connector
|
|
-- Enhances Reliability for Portable Electronics --
The Conan 1.00mm mezzanine connector system provides a mechanically secure, high density electrical interface between parallel printed circuit boards. Conan’s mechanical features and palladium/nickel/gold plated electrical contacts qualify it for higher reliability use in portable and mobile electronic equipment.
-- Features & Benefits --
> "Click" engagement assures secure mating.
> 4.15mm low profile to 7.0mm PCB stacking
> 9 sizes: from 9 to 69 positions
> Blade-on-beam contacts allow “peeling”and prevent “stubbing.”
> SMT mounting with SMT hold-down for increased strength
> Mating polarization prevents backward connections
> PCB polarization prevents manufacturing errors
> Tape and reel packaging supports automated assembly.
> High Density 1mm Mezzanine PCB Connector SystemIdeal for Portable Electronics
For more information : www.fciconnect.com
|
|
Tyco Electronics' Flex-to-Board Connectors combine the benefits of flex circuitry with the superior electrical performance of HXC125 for backplane to backplane interconnect. This solderless, compression mount connector allows for easy field replacement or repair. The simple hardware design minimizes the space needed for connector mounting.
This combination of HXC contacts and flexible circuits has allowed many difficult applications to be addressed. Backplane to backplane, as well as parallel PCB's, have benefited from these low profile and high density connectors. Due to the geometry of the contact, minimum real estate is required.
|
|
Connector system RFK 2
Description of system
Wire to Board socket connectors (WtB)
* crimp version for indirect connections, wire range 0.07 - 0.5 mm²
* IDC version for direct and indirect connections, wire range 0.14 - 0.25 mm²
* suitable for terminating ribbon cables and discrete wires
* also available with extended cable support and polarizing pegs
Pin connectors
* with or without snap-in locking device, for vertical or horizontal connections
* the tandem pin connectors can be used as flying lead connection
Board to Board-Federleisten (BtB)
* Board to Board connectors for vertical an horizontal connections
Pin strips
* in line version
* staggered versions and larger pitch sizes on request
|
|
|
|
|
|
ERmet ZD connectors were specially developed for differential high-speed signal transmission in telecom applications with data rates of up to 10Gbits/sec.
This robust, high quality modular connector system is just as well-suited for use in conjunction with the 2mm HM (IED 61076-4-101) ERmet line of connectors.
The inline design of the signal and ground contacts makes simple, economic routing (conductor track routing) possible. Signal and ground contacts have different connection levels with a gap of 1.5mm, thus ensuring a safe connection. In addition, the contacts are assembled into a robust housing.
The ERmet ZD connector utilizes an optimal grid construction that reduces signal interference and offers ample room for conductor track routing. Its optimized design and effective shielding allow the ERmet ZD system to exhibit superb performance when it comes to crosstalk and reflections.
The ERmet ZD connector has been selected as the backplane interconnect for the PICMG 3.x (ATCA) industry standard.
|
|
|
|
|
|
ERmet ZD connectors were specially developed for differential high-speed signal transmission in telecom applications with data rates of up to 10Gbits/sec.
This robust, high quality modular connector system is just as well-suited for use in conjunction with the 2mm HM (IED 61076-4-101) ERmet line of connectors.
The inline design of the signal and ground contacts makes simple, economic routing (conductor track routing) possible. Signal and ground contacts have different connection levels with a gap of 1.5mm, thus ensuring a safe connection. In addition, the contacts are assembled into a robust housing.
The ERmet ZD connector utilizes an optimal grid construction that reduces signal interference and offers ample room for conductor track routing. Its optimized design and effective shielding allow the ERmet ZD system to exhibit superb performance when it comes to crosstalk and reflections.
The ERmet ZD connector has been selected as the backplane interconnect for the PICMG 3.x (ATCA) industry standard.
|
|
|
|
|
|
Global Connector Technology SD Card Connectors are designed for ease & benefits of customers use, with push push style for easy & smooth card insertion & extraction, and 2.8mm ultra-low profile push pull style for simple, economic and space saving applications. All these SD Card Connectors are built with Read/Write Protection Switch to avoid accidental deletion of data stored in the SD memory card. The Push-Push style are built with card detection switch that can confirm card presence, and make Instant Plug & Play feasible. Both styles are designed for durability that supports more than 10,000 mating/unmating cycles, with also the grounded & shielded metallic shell enabling un-interrupted read/write operations from EMI, RFI or ESD.
Global Connector Technology offers both Push-Push style & Hinged Style Micro SD (or formerly called T-Flash) Card Connectors. Unlike the simple push pull design, the push push style, with our built-in spring system, braking tabs and rib-wall in the inner housing, card insertion and extraction is controlled for smooth and reliable entry and ejection, eliminating the risk of card fall-out or card sticking or any card damage during insertion & extraction.
|
|
Top-mounting connector supporting 5 memory card types: SmartMediaTM, MEMORY STICK DUO, SD Memory Card, MultiMediaCard, and xD-picture card
Width 54.2mm / Length 46.35mm / Height 10.5mm
Write-protect switch and card-detect function adopted
Polarized connector preventing mis-mating
RoHS compliant
Pb-free mounting
|
|
The high-speed SMT connector Microspeed with the pitch 1.0mm is especially designed for modern board-to-board applications in telecom and datacom equipments with data rates up to 10 GBit/s. MicroSpeed features differential signal transmission with a impedance of 100 Ohm or single ended signal transmission with a impedance of 50 Ohm. Two different signal contact arrangements are possible. For improved crosstalk parallel signal ports are recommended. A excellent signal integrity is achieved by a design with 2 signal and 2 shield contact rows. The termination area of the shield contacts is available in 2 options: SMT or THR (Thru Hole Reflow).
For fully automatic SMT assembly the connector features:
- Tape and reel packaging
- Black high-temperature insulator for fast and reliable visual recognition.
- Integral pick and place surface for easy grip with a vacuum pipette
|
|
|
|
|
|
Micro-D connectors
AXON’ develop custom designed solutions, based on Micro-D twist-pin contact technology for critical conditions:
- Connectors to MIL-DTL-83513
- pigtails, microstrip, connector savers
- Custom designed number of ways (i.e : 18, 33, 120)
- Specific shells or hardware (narrow shell) : shape and materials
- Specific plating material (500 h salt spray, stainless steel)
- Non removable hardware
- Specific layout for PCB versions (0.075” footprint onto PCB)
- Panel mounting shells, with waterproof seals
- Combo D : connectors including signals, coaxial and power contacts
- EMC optimised solutions
- Circular Micro-D connector range (plastic and metal shells)
- Overmoulding solutions
- Extreme miniaturisation
- Specific backshell termination
Nano-D connectors :
- Number of ways : 9, 15, 25, 37 and 51 ways
- Twist pin contacts
- Metal shells
- Rectangular connectors
- Standard hardware
- Non removable hardware
- Pigtails
- PCB connectors (BS/CBR/SMV)
- Special Nano-D connectors on request
Advantages
- Space saving
- Integration with specific cable or harness configuration
- High EMC protection
- Special shape to facilitate mechanical integration
- Customised solutions
- Extreme miniaturisation
- Twist-pin male contact : high reliability of electrical connection in severe conditions of temperature and vibration, low contact resistance, 500 g's mechanical shock resistance.
Applications
- Avionics, gimbals, radars
- Missiles and guidance systems
- On-board equipment, telecommunication systems
- Navigation systems
- Space
- Research Centres
- Off shore
- Medical application (hearing aid system, MRI, etc…)
- Automotive
|
|
|
|
|
|
Features - DRS
Specifications - Materials & Finishes
Insulator
-Polyphenylene Sulfide per MIL-M-24519, Type GST 40F, Black
Contact Material
-Pins - Beryllium Copper per ASTM B194, Alloy C17200
-Socket - Copper Alloy per MIL-DTL-83513
Contact Finish
-Gold plate per ASTM B488, Type II (Hard Gold), Code C, Class 1.27 (.000050)
Standard Termination Finish on Integral Tails
-Pin - Solder plated per AMS-P-81728 (Non-RoHS)
-Socket - Solder per J-STD-006 (Non-RoHS)
RoHS Termination Finish on Integral Tails
-Pin - Hard gold plate per ASTM B488
-Socket - Hard gold plate per ASTM B488
Standard Termination Finish on Soldercups
-Pin - Solder plated per AMS-P-81728 (Non-RoHS)
-Socket - Hard gold plate per ASTM B488
RoHS Termination Finish on Soldercups
-Pin - Hard gold plate per ASTM B488
Latch
-Beryllium Copper per ASTM B194
Latch Finish
-Electroless Nickel per AMS-C-26074
Guide Post
-Brass per ASTM B16, Alloy C36000
Guide Post Finish
-Electroless Nickel per AMS-C-26074
Guide Post (DRS ONLY)
-303 Stainless Steel per ASTM A582
Wire - Standard
-26 AWG, 7 Strand, Type E per NEMA HP3
Jack Post & Screw Receptacle (DRP ONLY)
-303 Stainless Steel per ASTM A582, Passivate per QQ-P-35
Retaining Screw (DRS ONLY)
-303 Stainless Steel per ASTM A582, Passivate per QQ-P-35
|
|
Micro Mini Connectors Directory
• Dual Key AC Connectors
• AC DIN Connectors
• Micro Plex
• Splitters/Tees
|
|
0.40mm (.016") Pitch Microminiature IDT Wire-to-Board Coaxial Connector System
Flexible High-Performance Signal Routing for Tight Packaging Applications
Molex's new microminiature IDT coaxial connector system provides superior signal integrity, space savings and reliability for mobile and other applications. The system was initially designed to run signaling through the hinge area of new swivel-type cell phones with rotating LCDs. The ultra-thin coaxial cable used in the system offers easier signal routing and space savings versus FPC.
A key advantage of the system over other types is our double-clamp wire grounding method that provides both electrical and mechanical grounding. This method offers a more reliable termination method than hand-soldering and up to 60% less transmission (dB) loss at frequencies between 1-3MHz.
|
|
OPTIONAL FEATURES
• Options of lengths, terminations, mounting features, wire gages,
colors and shell sizes.
• Also available with filter planar capacitor technology. Consult
Amphenol Canada for the filtered MIL-DTL-83513 micro D.
MARKETS
• Military Aerospace
• Medical Industry
• MIlitary Vehicles
• Geophysical Industry
• Missiles, Ordnance
• Communications
• Satellites
|
|
|
|
Computer connectors: 
