|
|
| Products 91 to 120 of 131 |
|
150°C round connector by ESCHA. Thermal load is an increasingly relevant issue concerning modern machines and systems. In order to comply as well with requirements in the field of connection technology, ESCHA has developed a new family of round connectors which sets standards with respect to thermal load. A permanent service temperature between -20°C and +150°C enables a broad ranged application without additional protection against high temperatures. Beyond the permanent service temperature, extreme thermal loads of up to +200°C in the application can be tackled. For the standard housing types M8x1 and M12x, ESCHA developed different polarities in order to offer a comprehensive solution with the new product family. The new connector type features degree of protection IP65 and thus fulfills the requirements of your application .
|
|
DH Subminiature Rack & Panel D Connectors are manufactured to the requirements of Mil-C-24308/9. The standard cold rolled and/or stainless steel body material comes with #52 alloy gold plated contacts. Standard finish is electro-tin fused. Other finishes are available. The insulator is made of a compression sealed glass. This product is QPL'd at HCC.
The ideal use for these connectors is in electronic and electrical equipment, for commercial and defense, airborne, ground support or shipboard systems. The size and weight lends the connector to various applications and the D shape ensures a positive polarization.
|
|
CompactPCI is an open bus architecture based on the Peripheral Component Interconnect specification (PCI) for desktop computing. The growing demands of commercial and industrial computing require more robust form factors, which have lead to the development of CompactPCI. The CompactPCI specification was developed in 1994 by an industry standards group, PICMG (PCI Industrial Computer Manufacturers Group), and uses industry standard components with high-performance connectors to maximize system performance for rugged applications.
Today, PICMG consists of 650 member companies that continue to work together to improve and expand upon the performance of CompactPCI. Winchester Electronics is an Executive Member of PICMG and is actively involved in the continuing development of high performance products to support CompactPCI applications.
|
|
|
Amphenol-Tuchel Electronics designs and manufactures the world's broadest range of Smart Card Connectors for a variety of applications including the access control, electronic fund transfer, healthcare, mobile phone and set top box industries.
|
|
Features:
- Available with 8 contacts which are designed to give a consistently reliable normal force over the life of the connector.
- For added reliability, the card detection switch (which is normally open) is sealed against dust and debris.
- Available with through-hole or surface mount contact termination and its lightweight design means that the connector can be automatically pick-and-placed.
- The moldings are made from high temperature thermoplastics suited for infrared and convection soldering processes.
|
|
Description:
Sub-miniature PC Board Socket for Ø0.5mm Pin
Features:
4-finger high-reliability contact clip
Finish:
Selective Gold or Gold (also Tin)
|
|
|
Available in 50 circuits , plating : 5 Gold on contact area and tin plated in solder area housing : LCP , UL 94V -0 . Voltage current rating 0.5A insulation resitance : 1000Megaohm minimum , dielectric withstanding voltages : 500vrms
|
|
|
|
|
|
Winchester Electronics' MetCon-2 line of 2mm Hard Metric connectors is designed to meet the requirements of IEC1076-4-101. MetCon-2 connectors provide a high-density, high-performance, and cost-effective board-to-board interconnect system. Primary applications include telecommunications, computer, storage, test and measurement, and industrial automation industries. MetCon-2 style connectors are also specified in industry-standard open architectures including CompactPCI and VME64x. CompactPCI specifications are controlled and managed by PICMG, a consortium of over 650 member companies that work to maintain and improve CompactPCI specifications.
CPCI Connectors
The Winchester MetCon-2 product line consists of 9 different module styles, available in right-angle sockets and vertical pin headers with press-fit terminations. Each module provides 5 rows of signal contacts and 2 rows of optional ground contacts. Pin headers are available with 12 different contact options - 3 mating lengths on the primary side of the connector, each available in 4 different tail lengths. Pin contact tail lengths include a 3.7mm press-fit tail for "feed-to" applications and 13mm, 14.5mm and 16.0mm extended tails for "rear plug-up" applications. This variety provides design engineers with the versatility to differentiate signal, power, and ground on both mating sides of the headers, which is necessary for "hot-swap" applications.
|
|
Connector system Series 80000
Description of system
Housings
* Indirect connector with crimp termination
* suitable for ribbon cables and discrete wires,
wire range 0.05 - 0.22 mm² / AWG 30 - 24
* Insulation-Ø 0.9 - 1.3 mm
Pin connectors
* in vertical and horizontal version
* with solder pins in line
* for PC board thickness of 0.8 - 1.6 mm
Board-in connector
* with crimp termination
* wire range 0.05 - 0.22 mm² / AWG 30 - 24
* Insulation-Ø 0.9 - 1.3 mm
* for PC board thickness 1.6 mm
* PC board hole Ø 0.8 mm
|
|
|
The SMT connector series MicroStac with 0.8 mm pitch and with SMT termination is based on a hermaphroditic design. As result of this the male and the female connector are identical. The same style for male and female connector meet the requirement for a economical connector solution in modern applications in electronics. The dual-sided PCB application contact principle provides for a tilt-proof and insertion-proof connector position on the PCB. The gripper surface is integrated within the insulator body. This obviates is the need for the standard assembly hood. Optionally, versions featuring positioning pegs are also available. Using the MicroStac a board-to-board height from 5.0 mm up to 6.5 mm is achieved.
|
|
|
For cable-to-board connections with flat cables, where space is at a premium. Plugs and solder-in connectors in insulation displacement technology, tab headers for THT and SMT soldering. For signal and low load currents up to 1.2 A, pitch 1.27 mm (.050").
|
|
ERNI pin connectors are one- and two-row plastic strips assembled with square 0.6 x 0.6mm pins. The connector side is completely gold-plated, and the terminal side is tin-plated. Unshrouded headers are available in different connection lengths and termination types. Right-angle versions are also available.
Single and dual row connectors can easily be broken off to the desired number of pins that is required, by using predetermined break points. Any number of pin connectors can be arranged next to each other in a row, as the housings have detents on their long sides. ERNI supplies many customer-specific solutions of this kind. It is also possible to have unshrouded headers with a pressfit zone on both sides - an inexpensive board-to-board connection.
|
|
Description:
2.54mm Pitch Single-In-Line Header Strip
Features:
Vertical Through Connect Header
|
|
Winchester Electronics offers double row press-fit .025 sq. inch Strip Headers for backplane applications that feature Winchester's proven, reliable, and industry leading C-Press compliant pin technology.
Winchester's Strip Headers have .100 x .100 inch grid contact centerline spacing, .290 inch mating post height, and are available in 10 - 100 total positions. Winchester's 130 Series Strip Headers are designed to be installed into a .093 inch minimum thick backplane and will mate to a wide variety of discrete wire, ribbon cable, and PCB female sockets based on industry standard .025 sq. inch technology.
- 130 Series, .100 x .100 inch grid Strip Headers
|
|
| ... products without technical information |
| |
|
|
Computer connectors: 
