|
|
AdvancedTCA
Female Connector
22-position
Position 1 - 4 and 17 - 24 no contacts
Press-Fit straight
Back plane connector
|
|
The AdvancedTCA® Power connector offered by HARTING is designed according to the PICMG 3.0 R2.0 specification and is used in the „Zone1“ section of the AdvancedTCA® backplane and daughter card.
The connector offers 8 power contacts with the current carrying capacity of up to 16 A each and 22 signal contacts in the standard configuration.
|
|
|
|
|
|
Series 243 Card Edge Connector
* .200" (5.08mm) Contact Spacing x .200" (5.08mm)
* Accepts .062" (1.57mm) Nominal Thickness PC Board
Series 301 Card Edge Connector
* EISA or ISA (IBM XT/AT) Daughter Boards
* .050" (1.27mm) Contact Spacing 4 Rows 2.54mm Spacing
* Accepts .062" (1.57mm) Nominal Thickness PC Board
Series 302 Card Edge Connector
* Accommodates MCA Daughter Boards
* .050" (1.27mm) Contact Spacing 4 Rows 2.54mm Spacing
* Accepts .062" (1.57mm) Nominal Thickness PC Boards
Series 303 Card Edge Connector
* UL Recognized .156" (3.96mm)
* Contact Spacing x .140" (3.56mm)
* Accepts .062" (1.57mm) Nominal Thickness PC Board
Series 305/315/355 Card Edge Connector
* 305/355 Series CSA Approved and UL Recognized
* 315 Series UL Recognized
* .156" (3.96mm) Contact Spacing x .140" (3.56mm)
* Accepts .062" (1.57mm) Nominal Thickness PC Board
Series 333 Card Edge Connector
* .156" (3.96mm) Contact Spacing x .200" (5.08mm)
* Accepts .062" (1.57mm) Nominal Thickness PC Board
Series 345/395 Card Edge Connector
* CSA Approved and UL Recognized
* .100" (2.54mm) Contact Spacing x 5.08mm
* Accepts .062" (1.57mm) Nominal Thickness PC Board
|
|
The Tyco Electronics’ LIGHTPLANE Connector is a multi-position fiber optic backplane connector that permits blind mating of singlemode or multimode optical fibers from a daughtercard to a system backplane or motherboard. Now you can simultaneously make both the optical and electronic interconnections when installing the daughtercard. The LIGHTPLANE connector contains up to 8 fiber
positions utilizing the standard SC interface.
|
|
|
|
|
|
Winchester Electronics' High Density Plus® (HD+) product line is an all-inclusive backplane connector system consisting of signal, power, guide, and polarization modules. All backplane connector modules are sold individually, while daughtercard modules are mounted onto an extruded aluminum stiffener and sold as "stiffener assemblies." The ability to stack a variety of modules next to one another allows OEM designers to create custom connector configurations using standard off-the-shelf components.
Contact centerline spacing for HD+ signal modules is a .100 x .100 inch grid. Backplane pin connectors contain robust .025 square inch pins, which are less likely to be damaged during assembly, handling, and mating than many of today's higher density backplane connector systems. Backplane pin connectors are available in solder tail or with Winchester's proven, reliable, and industry leading C-Press® compliant pin technology.
Signal modules are available as 3- or 4-row modules with either 15 or 20 positions per row. For applications that require improved electrical performance, signal modules can also be supplied with 1 or 2 additional contact rows that help to:
- Minimize reflections due to impedance mismatches.
- Reduce cross talk between adjacent signal contacts.
- Minimize inductance of contacts used for power and ground.
- Integrate power distribution into the backplane.
|
|
Backplanes BS2xx
* 1 .. 16 module slots
* Seamless connection possible
* Vibration proof fixing of modules
* Snappable on backplane
* Stabile mechanical design
|
|
|
|
|
|
I-Trac™ Backplane Connector System
Minimize cross talk, achieve superior impedance control and high-bandwidth backplane connections with Molex's I-Trac System
The I-Trac™ Backplane Connector System features a broadside-coupled, skew-equalized design that handles speeds up to 12.5+ Gbps. It offers multiple benefits over other backplane products, including superior impedance control, lower cross-talk and higher overall bandwidth. With its unique open pin-field design, the I-Trac System gives customers the flexibility to assign high-speed differential pairs, low-speed signals, power and ground contacts anywhere within the pin-field.
As a press-fit, mono-block system that can be stacked end-to-end to meet customer pin-count requirements, the I-Trac System features a flexible design for any configuration. It is well-suited for standard and orthogonal architectures in server, storage, telecommunications and data networking applications. It utilizes the same part numbers for both standard and orthogonal architectures by providing the option to rotate the headers 90 degrees on one side of the mid-plane. This eliminates the need for customers to purchase unique, expensive components normally required with competitive orthogonal products.
The I-Trac System supports quad trace routing, which reduces PCB layer count and the associated cost. Mid-plane PCB layers can be reduced even further by leveraging the orthogonal capabilities of the I-Trac™ System. In an orthogonal architecture, the I-Trac™ System completely eliminates the need for PCB traces through the use of shared vias.
|
|
|
The DIN 41612/IEC 60603-2 connector line from ERNI includes standard connectors and customer-specific connector technology solutions. The standard and inverted connectors for printed circuits correspond to national and international standards. All connectors have the same installation requirements, regardless of differing application characteristics. This connector line includes modules with a high contact density for low voltages; and modules with a low contact density for high voltages. In addition to the standard types, ERNI offers a wide variety of versions and connection technologies that provide users with economical solutions.
|
|
|
|
|
|
BASICS+
Basics+ brings together our proven, standard connectors for board-to-board and wire/cable-to-board applications. Our goal is to save you time by providing “Easy To Use” services. All services are accessible via the dedicated Basics+ web site : www.fciconnect.com/basics
EASY TO SELECT A PRODUCT
This catalogue provides an easy overview of the most standard Basics+ products. For even more choice, our web catalogue provides the step search possibility that guides you step-by-step to your part number
EASY TO GET DOCUMENTATION
Data sheets, product drawings, specifications, application notes, packaging drawings and more are available on the web site for download.
EASY TO GET TECHNICAL SUPPORT
Get your technical questions answered within 24 hours on our e-mail hotline basics.help@fciconnect.com
EASY TO GET SAMPLES
Order a sample today, and you can start to work with your Basics+ product right away! Sample orders can be placed via the web site.
EASY TO GET COMMERCIAL INFORMATION
As a customer, you can have registered online access to prices, packaging quantities, minimum order quantities, and lead times. All the commercial information you need is at your fingertips.
|
|
|
|
|
|
|
Board to board connectors from GCT are of high quality and very competitive prices, with connector pitches ranges from 0.5mm, 0.8mm, 1.00mm, 1.27mm, 2.00mm to 2.54mm (0.019", 0.031", 0.050", 0.079" to 0.100" centerline), of single, double, triple or quadruple rows, with vertical (straight) or horizontal (right-angle) orientations in surface mount or through-hole(DIP) lead style. All the board to board connectors can be custom made based on specific customers design requirements, to achieve different stacking heights, from as low as 3mm, to more than 60mm, as well as different PCB orientations (right-angle, planar, and stacked). All posts & tails pin lengths, insulator or profile heights, contact plating (gold flash, tin, gold or selective gold plating from 1u" to 30u" thickness), locating pegs or polarization keys, contact terminals types (tuning fork, dual beam folded, triple beam folded or 4-side closed spring contacts), insulator materials of UL94V-0 thermoplastics (Nylon 6T, LCP, or PBT), suitable for high temperature reflow or wave soldering and are RoHS compliant, different entry types (top entry or dual entry sockets), voided pins or contacts for increasing pin pitch, can all be built and customized based on customers requirements.
|
|
|
Available in 4 through 32 circuits Insulator material : glass filled nylon 6-T UL 94V-0 contact material: dual contact in phosphor bronze Tin –lead plated contact with kink tail . Low insertion force .Accommodated 0.30mm FFC /FPC thickness
|
|
Tyco Electronics' HXC125 Board-to-Board Connectors offer a high performance, high density interconnect for today's design challenges.
Connectors are available in 1mm to 4mm heights, with centerline spacing as low as 1mm. This solderless, compression system allows for ease of assembly while offering excellent power management capability. Standard 1.0 mm contacts are rated to 4 Amps each.
|
|
|
|
|
|
Winchester Electronics offers a comprehensive line of pre-assembled press-fit Edgecard connectors for backplane applications that features Winchester's proven, reliable, and industry leading C-Press compliant pin technology.
Winchester Electronics Edgecard product line is available in a variety of contact centerline spacings, contact pair position sizes, and contact tail lengths. Additional options include bifurcated or non-bifurcated contacts, standard or high scoop insulators, .415-, .350-, or .300- inch card slot depths, and closed-ended or open-single-ended connectors.
All Edgecard connectors are designed to be seated into .093 inch minimum thick backplanes and to mate to double-sided PCBs ranging in thickness between .054 - .071 inch.
- "A" Grid, NK & NJ Series, .100 X .100 inch
- "B" Grid, 276 Series, .125 X .125 inch (Early/Late Make and Shorting Contacts)
- "C" Grid, MK, NK, MJ, & NJ Series, .100 X .200 inch
- "D" Grid, MK, NK, MJ, & NJ Series, .125 X .250 inch
- "E" Grid, MK, NK, MJ, & NJ Series, .156 X .200 inch
|
|
When space is at a premium, our board-to-board connectors are the perfect solutions. Proven reliability combined with design flexibility provide effective results for even the most demanding SMT and thru-hole applications.
Featured with :
- available in .050" (1.27mm), .079" (2mm), and .100"(2.54mm) pitch
- high density, low-profile interconnects
- high quality screw-machined terminals offer reliable electrical/mechanical interconnects
- wide variety of terminals and plating options
- mezzanine board applications
- unique solder preforms allow multi-tier Z-axis expansion
- RoHS Compliant insulators with either Gold/Gold or Matte Tin/Gold terminal plating are compatible with lead-free processing
|
|
F4 - The smallest pitch (0.4mm) and lowest mating height (0.9mm) available
This series for board to fpc board connection has a pitch of only 0.4mm and a height of 0.9mm. Despite its small size, the connector includes spring-elastic contacts and a locking mechanism.
|
|
2.54mm Board to Cable Connectors (Latch Headers) Series LPV acc. to IEC 60603-13
Female connectors
IDC
Interlocking latches
Male connectors, with interlocking
Solder
Pressfit
THR (black)
Male connectors, without interlocking (low profile)
Solder
Pressfit
Strain relief clamp
|
|
|
Available in 2 through 24 circuits .positive housing lock for secure mating retention .Merial: PBT UL 94 V -0 for free hanging or panel mounted mates with 5741 and 5742 series terminals .3.00mm center spacing wire to wire .low engagement force terminals current rating : 5A max
|
|
Winchester Electronics TMRACV series 34-position connectors are in compliance with the ISO 2593 CCITT V.35 interface standard for high-speed data communication. Winchester's V.35 connector offering includes products for cable-to-cable and cable-to-board applications and features:
- Right-angle female PCB receptacles available fully loaded or with special contact load patterns.
- Variety of PCB mounting brackets including 4-40 threaded inserts, .120-inch diameter through-holes, and metal snap-mount hold-downs.
- Male and female insulators for cable applications.
- Screw machined or stamped and formed contacts available on reels or loose-piece.
- Conductive and non-conductive drawn cable hoods for cable diameters between .180 - .600 inches
|
|
Connector system ECO-DOMO
Description of system
IDC housings
* Direct and indirect connector with IDC termination in accordance with the RAST 5 standard specifications for domestic appliances, with locking features inside or outside
* Direct connector with central polarizing and polarizing pegs at sides, locking features for PCB
* Cable exit 90° and 180° according to RAST 5
Pin connectors for indirect connectors
* Versions for vertical or horizontal PC board assembly
|
|
Mencom Corporation cable connectors, often referred to as circular connectors, are produced in a variety of configurations. They are available in molded cable, receptacle, or field wireable with several wire color code choices as well as multi pole choices. Mencom is the only manufacturer to number both the face and the wires on their circular connectors.
Products:
CABLE GLANDS
CAPS
JUNCTION BLOCKS
TERMINATING PLUGS
T's
|
|
|
|
|
|
The EasyConn PB of Vipa is offering an accessory for practical use with well thought-out performance characteristics. For the first time a micro-controller has been integrated into a Profibus connector which can provide information on power supply, bus function, termination and possible bus failures via four LEDs. With the integrated PG/diagnosis jack the plug is especially suitable for application in extensive plants.
The bus cables can be easily connected with the insulation piercing technique: open the cover, insert the unisolated cable, close and fix it with the captive screw. Additional security for the connection of incoming and continuative bus lines is given by the transparent cover and its possibility of visual inspection.
Connection with a highly-flexible bus cable from Lapp according to Type A (EN 50 170) will also be possible with immediate effect.
The termination can be activated and deactivated with a comfortable slide switch which also enables the disconnection of the continuative bus line. Thereby tests can be conducted without having to remove or connect cable and plug. The EasyConn PB offers cable outlets in 90°, 45° or 0°. The 90° variant is also available without diagnostic function.
|
|
|
VIPA offers a wide range of accessories like programming, download or Profibus-DP cables, memory modules and Profibus-DP plugs with diagnosis.
|
|
Woodhead Introduces the most significant innovation in industrial connectors in 30 years!
NEW! Ultra-Lock Connector System
Next Generation M12 Connector Technology
Fast - Simple - Secure
|
|
FEATURES
- Body components available with any desired pin and socket combination
- Floating contacts
- Polarization accomplished by reversed pin and socket combination
- Model A20 has barriers for increased creepage distance
- Thru hole permits use of building block technique or flat mounting
|
|
Tyco Electronics offers a broad portfolio of connectors for main Memory modules, removable Memory cards and microprocessors made to the many industry standard specifications.
The Tyco Electronics main Memory connectors are made to JEDEC industry standards for SIMM (Single In-line Memory Modules) and DIMM (Dual In-line Memory Modules) for computer and communication applications. Each product family consists of vertical, right-angle and various angled configurations in solder tail, press fit and SMT mounting options.
|
|
Solder Pin Connectors
1. CompactPCI Male Connector 38-position Solder pin angled Standard
38-position
Solder pin angled
Standard
|
|
The terminals for printed circuit boards offer the possibility of establishing mechanical and electrical connections between wires and printed circuit boards. Our range only comprises screw terminals to secure an optimal electrical contact. They may be placed side by side and labelled.
In addition to one-step versions our range includes also two- and three-step terminals with compact design but important connecting capacity. The terminals are available with various cross sections and pin spacing. Our programm also comprises pluggable PCB terminal strips (with plugs and sockets) which enable electronic modules to be disconnected and easily replaced.
|
|
ERNI Systems is one of the leading companies for turnkey manufacturing of customized backplanes, cPCI / VME standard backplanes and sub-rack integration.
Production facilities in America, Asia and Europe enable us to offer global sourcing for international customers.
|
|
|
|
Computer connectors: 
