|
|
| Products 121 to 150 of 172 |
DH Subminiature Rack & Panel D Connectors are manufactured to the requirements of Mil-C-24308/9. The standard cold rolled and/or stainless steel body material comes with #52 alloy gold plated contacts. Standard finish is electro-tin fused. Other finishes are available. The insulator is made of a compression sealed glass. This product is QPL'd at HCC.
The ideal use for these connectors is in electronic and electrical equipment, for commercial and defense, airborne, ground support or shipboard systems. The size and weight lends the connector to various applications and the D shape ensures a positive polarization.
|
|
CompactPCI is an open bus architecture based on the Peripheral Component Interconnect specification (PCI) for desktop computing. The growing demands of commercial and industrial computing require more robust form factors, which have lead to the development of CompactPCI. The CompactPCI specification was developed in 1994 by an industry standards group, PICMG (PCI Industrial Computer Manufacturers Group), and uses industry standard components with high-performance connectors to maximize system performance for rugged applications.
Today, PICMG consists of 650 member companies that continue to work together to improve and expand upon the performance of CompactPCI. Winchester Electronics is an Executive Member of PICMG and is actively involved in the continuing development of high performance products to support CompactPCI applications.
|
|
Hermetically sealed connectors are interconnects that facilitate the flow of electrical current across two devices and can be mechanically coupled to, or uncoupled from, another connection. HCC produces military specification ("mil spec") and customized connectors for aerospace, defense, industrial and petrochemical applications. For example, in an airplane cockpit, hundreds of connectors are used to provide electronic connectivity between instrument displays and the computer hardware that controls them.
|
|
|
Watertight IP68, gas-tight hermetically sealed, safe locking system, Fischer Connectors products are ideal for use under water (to a depth of 80 meters), in vacuum chambers, and in outdoor applications facing harsh weather conditions.
|
|
|
|
|
|
Push Push SIM card connectors have a mechanism for easy card insertion & extraction – no need to open & close cellular phones lid to access the SIM card
Built in card detection switch for hot swap, plug & play applications
Anti-fly out brake feature to prevent card fall out during ejection
Shielded metallic case minimizes EMI / EMC pick up from the antenna
High quality 15u" gold plated contacts guarantees minimum 5,000 mating / unmating cycles
Combo SIM connector (SIM & MicroSD)
Compact 3.4mm low profile for slim portable designs
Built-in card detection switch for hot swap, plug & play applications
Controlled 0.1mm co-planarity after reflow soldering
Hinged SIM card connectorsHinged SIM card connectors offer:
Robust hinge slide lock mechanism holds the SIM card securely even under intense vibration
Guided housing for card alignment, preventing card mis-insertion
1.80mm low profile for slim design applications
Shielded metallic cover minimizes EMI / EMC pick up from the antenna
Retainer SIM card connectors have 4 different designs, clip or cover, long or short body, of profiles 1.8, 2.0, 2.2mm
Card guide and stops in housing prevents card mis-insertion
Reliable Low-Friction Contact s with 50mOhm Contact Resistance only
High quality 15u” gold plated contacts guarantees minimum 5,000 mating / unmating cycles
Contact SIM card connectors are Compact & Low Cost Design of 4 profiles (1.2, 1.5, 1.8, 2.0mm) for different design scenarios
Reliable Low-Friction Contact s with 50mOhm Contact Resistance only
Durable design with more than 5,000 mating / unmating life cycles
|
|
- Springwire- and Lamella System, Slotted contacts
- High numer of mating cycles – above 1 Mio.
- Extremely reliable connection
- Low mating and demating forces
- Æ 0,6 up to 50 mm
- economical solution
- Also: ODU Springwire Flat-Socket
- Modification of the catalogue version possible
|
|
Stainless Steel Bayonet Lock Connector
ABSB - Stainless Steel Bayonet Lock ConnectorABSB Series. Based on the ABBMS Series of bayonet coupling connectors the ABSB range features shells and accessories manufactured from high corrosion resistant stainless steel.
Ideally suited for marine applications, the ABSB range is also for projects where harsh, highly corrosive environments will be encountered.
The standard accessory is designed to accept jacketed screened cable and heat shrink boot.
Performance of the connector is generally to VG 95234 with additional environmental requirements.
Further details on the ABSB range available on request from the factory.
|
|
|
The SMC line of versatile connectors offers a great deal of design application flexibility. Different modules (such as straight and angled male and female multipin connectors) in combination with other options (e.g. IDC versions) afford users the freedom for an optimal assembly design. The connectors are reliably produced on state-of-the-art, fully automatic manufacturing machines. Due to the high contact density and small space required, SMC connectors offer a number of new application possibilities. The precision manufactured contact guarantee a reliable mate. SMC connectors are available in several different heights. The combination of standard profile and low male and female connectors support four different board-to-board stack heights (8.0 - 14.0mm).
|
|
Since 1984 B&B Thermo-Technik GmbH develops and manufactures successfully Thermocouple Connectors.
The high quality thermocouple connectors are available as Standard and Miniature Connectors. The connectors might be executed in plastic, high temperature plastic or ceramics.
Just have a look in our temperature-shop at:
www.temperature-shop.eu
There you will also find a lot of accessories all around connectors, cables, and temperature measurement.
|
|
Measure resistances, resistance thermometers, compensation cables, insulated cables and particularly insulated thermocouples must be fitted with a suitable connector for the industrial use.
The thermovoltage is measured in mV and µV.
The LEMO connector is the ideal construction part for this technology.
|
|
|
|
|
|
Omega’s new Wireless Thermocouple Connector Series features stand-alone, compact, battery powered thermocouple connectors that transmit their readings back to a host receiver up to 120 m away.
Each unit can be programmed in the field to work as a type J, K, T, E, R, S, B, N or C calibration connector. When activated the connector will transmit readings continuously at a pre set time interval that was programmed by the user during the initial setup. Each unit measures and transmits: Thermocouple Input Reading, Connector Ambient Temperature, RF Signal Strength and Battery Condition to the host and is displayed on the PC screen in real time using the provided software.
When used with host receiver models UWTC-REC1 or UWTC-REC2 data from up to 48 wireless thermocouple connectors can be received and displayed. Each USB powered unit includes free software that converts your PC into a strip chart recorder or data logger so readings can be saved and later printed or exported to a spread sheet file.
The UWTC-REC2 also allows wireless data from one transmitter to be re-transmitted out of the receiver by a wired connection as an analogue voltage or current to interface with a controller, PLC or data acquisition board.
|
|
CMS Series. CMS, Commercial MS connectors are based on the SBMS range and conform to the general requirements of MIL-C-5015. CMS satisfies the commercial and industrial demand for quality, reliability, low cost and established design features.
Intermateability and interchangeability with existing MS-A types is assured.
CMS connectors feature robust aluminium alloy shells with bonded monobloc neoprene insulators. Contacts are solder types and range between 2 & 37 in number dependant upon arrangement.
A wide selection of accessories is also available.
Further details on the CMS range available on request from the factory.
|
|
|
|
|
|
983 R / RS / W / WS
Fine threaded coupling electrical connectors with secure self locking for engines, under carriages, APU and pylon applications and harsh environments.
All electrical connectors Deutsch 983 series are intermatable and interchangeable with connectors in accordance with MIL-C-83723 series III and NF-L-54143
Features & Benefits
Shell: Material: R & RS: Aluminium nickel: / W & WS: Aluminium olive drab cadmium
Insert: Material: R, RS, W & WS: Thermo-setting and silicone
Contacts: Crimp type, removable, plating gold
Operating temperature range: R & RS: -65C to +200C : W & WS: -65C to +175C
Salt spray resistance : W &WS: 500 h / R&RS : 96 h
Shell to shell metal bottoming (Plug and receptacle mated)
Anti-rotation system on 360 by tightening - Self-locking system all plug
Reduced elastomer barriers to use new and old generations of wires
High temperature resistance
Long duration salt spray
Standards and Quality Approvals
EN2997
SBAC ESC10
Boeing BACC63
EN3155
ESC30
MIL-C-39029
MIL-C-83723 Series III
Technology/ Coupling System
Environmentally Sealed
Screw thread
|
|
Significantly 50% lighter than typical metal connectors, the new aluminium engineered Fischer AluLite Series is your solution to ultralight product design.
Ultralight, compact and offering excellent strength to weight ratio, the new Fischer AluLite range is ideal for mobile equipment, portable systems and hand-held devices. Available in a wide range of colors, the Fischer AluLite connectors easily integrate with your product design, while also offering a flexible color-coding system.
|
|
|
|
|
|
Mini B Receptacle.
Compact, Robust and Durable design of more than 5,000 mating / unmating cycles
5 Pin Right Angle type, full compliant with USB2.0 (backward compatible to USB1.0 & 1.1).
15u" gold plated contacts for low contact resistance (<50mOhm).
Top Mount & Mid Mount with optional Post, suitable for different design scenarios.
Hi-Temp thermoplastics (e.g. 30% glass filled LCP) rated to UL94-V0 as housing material.
Metal shielding prevents unwanted RF signals radiating out to interfere other components.
Wide flat top surface with tape & reel packing suitable for easy pick & place mounting.
Mini AB Receptacle.
10 Pin Right Angle type, full compliant with USB OTG, USB2.0 (backward to USB1.0 & 1.1).
15u" gold plated contacts for low contact resistance (<50mOhm).
UL94-V0 Hi-Temp thermoplastic housing with structure to prevent inverted insertion of plugs.
Metal shielding minimize EMI interference to other components.
Wide flat top surface with tape & reel packing suitable for easy pick & place mounting.
Micro B Receptacle.
Ultra-small, almost 50% smaller than a Mini B Receptacle - uses less space.
Top Mount, Mid Mount, DIP types available for different design configurations.
5 pin Right Angle type, full compliant to USB2.0 (backward compatible to USB1.0 & 1.1).
10u" & optional 30u" gold plated contacts for low contact resistance (<30mOhm).
Improved durability for a guaranteed life of 10,000 mating / unmating cycles.
Metal shielding minimize EMI interference to other components.
Wide flat top surface with tape & reel packing suitable for easy pick & place mounting.
|
|
|
The 2 Port Position Vacuum Receiver Modules are available with or without a filter. The ITA Module is available with or without a M22.5 x 1.5 Tap. These modules are made of Black Anodized Aluminum withstanding temperatures between -65° C and 200 ° C.
|
|
The VCDS is a single-width, C-size VXI module that adapts most B size VME modules for use in a VXI mainframe. The VCDS is a functional replacement for the Colorado Data Systems Model CDS 73A-851.
The VCDS adapter maintains the VMEbus environment, timing, and backplane by buffering the VME address bus, data bus, and control signals and routing them to the installed VME module.
The VCDS supports seven interrupt levels, IRQ1 through IRQ7. The VCDS has an Interrupt Select Switch for each level on the VXIbus. The switches determine if the installed VME module will act as an interrupt handler or an interrupter, for each of the VXIbus interrupt levels.
|
|
VXI InterConnect Solutions
Virginia Panel solutions accommodate a wide range of ATE chassis sizes/configurations including PXI, SCXI and VXI applications. These solutions afford modular flexibility and address a wide range of signal, power, coaxial, fiber optic and pneumatic I/O requirements. High performance cable assemblies and patchcords ensure quality connections and fast assembly of your Mass InterConnect Solution.
9025 VXI- 25 Module
Pre-wired InterConnect adapters act as a compact funnel for wiring directly to VXI cards
9050 VXI - 50 Module
Plug the connectors on the back of the funnel to the VXI card and the test system is ready to use
9075 - 75 Module
Time saving with rapid changeover
|
|
- Dynamic IP68/IP69 - Waterproof connectors in mated an unmated conditions
- Design based on MIL-DTL-26482 connectors or equivalents such as BS 9522 FOO17, NFC93422, HE301B, VG 95328.
- Protection of electronics inside the equipments/boxes in case of maintenance, unmated conditions or cable damage.
- Salt spray resistance:500h
- Temperature range: -40°C +105°C
- Mechanical performance: 250 matings/unmatings
- RoHS compliant
|
|
| ... products without technical information |
| |
|
|
Data transfer connectors: 
