|
|
|
The SIHD connector combines excellent electrical performances to high density of contacts within a robust housing, which can withstand extreme environmental conditions. In addition, the lateral displacement capability allows the usage of thermal clamps for heat management, as well as an easier positionning on the backplane in terms of tolerances.The optionnal central ground strip provides a cross talk protection and permits the routing of diffy pairs.
|
|
HIGH SPEED CONNECTOR SYSTEM
FCI is the leading innovator in the design and development of high speed connectors and interconnect solutions.
FCI currently provides full signal integrity support as part of its latest high speed connector range of products. This enables customers to improve their time-to-market and product performance.
FCI continues to invest in leading edge products to meet its customers future design requirements.
The main target markets & applications for AirMax VS® connectors are:
DATA
- High end servers
- Mid range servers
- Entry servers
- Storage devices
COMMUNICATIONS
- IP routers
- IP Switches & gateways
- ATM switches
- IP PBX’s
- High speed enterprise routers
- 3G Base stations
- ATCA™ Zone 3
INDUSTRIAL
- Medical
- Test & measurement
|
|
|
High Speed connector series for the Advanced Mezzanine Card according to the AdvancedTCA and MicroTCA standards. Also MCH plugs for MicroTCA.
|
|
|
High Speed connector series for the Advanced Mezzanine Card according to the AdvancedTCA and MicroTCA standards. Also MCH plugs for MicroTCA.
|
|
|
|
|
|
The DisplayPort is designed for internal and external system solution for high bandwidth audio and video data transfer in the notebook and PC market. The standards, defined by Video Electronics Standards Association (VESA), cover provisions for high definition digital audio-video and graphics streaming via the interface through the same cable. This reduces cost and provides ease of use through the plug-and-play feature making it user- friendly for consumer. It also provides performance scalability for future developments of high quality displays, high color depths and high refresh rates display.
Molex, in accordance to requirements outlined by VESA, has developed the external DisplayPort* Interconnect System solution. It consist of 20-circuit, 0.50mm pitch SMT, external receptacles designed with a polarized D-shape mating interface and metal shield for full EMI/RFI protection. In addition, the connectors are designed with four solder pins for added mechanical stability and robustness, as well as a snap-in plastic peg for positive polarization during connector mounting. The receptacle is to be mounted on the device side and the plug, which is overmolded at both ends of the cable assemblies, on the display device. The cable assemblies come in both latching and non- latching versions with cable length of 2m and 15m. Examples of source applications are desktop PC, set-top box, DVD player or game console, and display applications are the likes of TV monitors or projection display.
|
|
|
|
|
|
ERmet ZD connectors were specially developed for differential high-speed signal transmission in telecom applications with data rates of up to 10Gbits/sec.
This robust, high quality modular connector system is just as well-suited for use in conjunction with the 2mm HM (IED 61076-4-101) ERmet line of connectors.
The inline design of the signal and ground contacts makes simple, economic routing (conductor track routing) possible. Signal and ground contacts have different connection levels with a gap of 1.5mm, thus ensuring a safe connection. In addition, the contacts are assembled into a robust housing.
The ERmet ZD connector utilizes an optimal grid construction that reduces signal interference and offers ample room for conductor track routing. Its optimized design and effective shielding allow the ERmet ZD system to exhibit superb performance when it comes to crosstalk and reflections.
The ERmet ZD connector has been selected as the backplane interconnect for the PICMG 3.x (ATCA) industry standard.
|
|
|
Known for their reliability and precision, Fischer Connectors' products are globally exploited in the high-end instrumentation field, for applications like environmental analysis equipments, hazard warning and telemetry systems, mass spectrometers or vacuum generators.
|
|
The GP-IP(USB)FL can connect a measuring instrument to a USB port on your PC via GPIB communication. One of the major features of this product is a simple look as it can connect them using a general USB cable in place of a GPIB cable. As the product itself is a USB device, you can easily and quickly install it on your PC. This means you can use the product to enable GPIB communication even from a notebook PC with no expansion board slot or a space-saving PC with few expansion slots via IEEE-48. The product supports USB 2.0 to enable communication at high speed (a maximum of 480 Mbps). The product is bus-powered from the USB port and thus requires no external power supply, resulting in its compact design and best suited for use in a narrow space with a small number of wall outlets available.
|
|
We can offer following interface adapters for your solutions:
* NARS-1F with D15 male / D9 female -connectors, 650 mA fuse, including power supply wires and programming switch
* NARS-1F-4A similar than NARS-1F, but with 4A fuse (to be use only with Epic)
* NARS-2 with D15 male / screw connectors, 650 mA fuse adapter for RS-422 / 485 interface.
* NARS-2-4A similar than NARS-2, but with 4A fuse (to be use only with Epic)
* NARS-1F-4A-SC D15 female / D9 female -connectors, 4A fuse, 2.1 mm DC socket
|
|
|
ERNI M8/M12 circular connectors can be used to implement a flexible I/O or field bus connection on the circuit board. With the modular design concept, connectors can be quickly and easily manufactured in different heights and versions, e.g. 2-, 3-, 4- and 5- pin M12 connectors as well as 3- and 4-pin M8 connectors. We use a variety of SMT, pressfit or THR technology, depending on the customer's requirements. M12 connectors are currently recommended as field bus connectors for almost all field bus specifications, and are also available with coding. The introduction of the new M8/M12 connectors illustrates ERNI's commitment to develop a reliable and flexible I/O or field bus connection on the circuit board.
|
|
The BradConnectivity line of Ethernet products combines standard RJ-45 connection technology with the industrially proven form-factor, or by utilizing industry-standard Micro-Change M12 connection technology. The result is a lineup of products designed to preserve the integrity of your data transmission even in the harshest settings.
Also available with the Ultra-Lock connection system.
|
|
|
Food & Beverage Plus by ESCHA - the new standard for the food industry. All components are resistant to all common acid and alkaline detergents and disinfectants, dust and water proof according to IEC60529 (IP67) and they resist high pressure water and steam jet cleaning procedures according to IEC60529 (IP69K). Due to cleaning resistant plastics hardenings and discolouration are avoided. The flame-retardant cable as well as the fire and cold resistant temperature range ( -40°C …+105°C) are further features of the new F&B Plus family by ESCHA.
|
|
|
|
|
|
HCC Industries is dedicated to providing quality products and service. As the nation's largest and most experienced vertically integrated designer and manufacturer of glass to metal and ceramic to metal seals, HCC has the capability to create hermetic connectors that support military and federal requirements.
The Qualified Products List provides the mil spec hermetic requirements that HCC's QPL product line adheres to, as well as the appropriate product identification and test reference to ensure you receive the highest quality product for your specific project conditions.
We specialize in creating custom MIL-STD solutions to fit a specific project's stringent requirements and precision standards. Our hermetically sealed connectors offer high reliability and quality that is required for completion of critical tasks.
With over 60 years of experience adhering to strict product requirements, HCC is confident in our ability to provide quality QPL products to a wide range of industries. We work with your program's mil spec hermetic specifications to create uniform, hermetically sealed connectors.
|
|
Description
Derived from 851 / Mil-C-26482 I
Shells in stainless steel: high resistance to corrosion
Sealing level IP 67 enhanced with interfacial seal on receptacles
3 different keying positions color coded:
-keying N : gray
-keying G : red
-keying H : blue
-keying U : green (universal keying)
Two layouts available: shell size 20 with 16 contacts and shel size 16 with 8 contacts
Plugs delivered without coupling ring
Not intermateable with Mil-C-26482 series 1
|
|
|
|
|
|
9316 series
Stainless steel circular connector that can be emerged underwater for high pressure saltwater applications.
Available in 7 shell sizes and 23 classic arrangements.
Explosion proof and hermetic versions also available.
Features & Benefits
Current rating: from 5A to 600A
Operating temperature range (standard): -55C to +125C
Operating temperature range (explosion proof connectors):-55C to +85C
Pressure rating: 750 bars for 9306 series
Pressure rating: 150 bars for 9316 series (hermetic receptacles)
7 shell sizes and 23 arrangements with gauge 0, 4, 8, 12, 16 and 20 available
Material: Stainless steel AISI 316 L passivated
Bronze screw coupling
500 mating and unmating cycles
Hermetic feedthru also available
Signal contacts to crimp, power contacts to solder, coaxial and optics contacts
Standards and Quality Approvals
Qualified for anti explosion EN 50014 and EN 50018
Technology/ Coupling System
Fibre Optic
Hermetically Sealed
Microwave
High power
Environmentally Sealed
Screw thread
|
|
ABXS. With its ingenious ball-bearing coupling mechanism, the ABXS Miniature Push-Pull Connector is easy to use and provides a reliable interconnect for signal and power in audio, control and instrumentation applications. The range has two shell sizes housing 3 to 9 gold plated contacts in a range of aesthetically pleasing long life shell finishes.
The ball-bearing mechanism provides easy connection by pushing on the back accessory and easy disconnection by pulling on the coupling nut. The connector cannot be disconnected by pulling on the cable or backshell using normal force.
The shells are made from copper alloy with a choice of finishes in bright nickel or black epoxy.
|
|
|
Miniature connectors (also referred to as "Mini DIN"), including S-VHS, and DIN connectors according to DIN 455321, mating compatible to IEC 60130-9. 3-8 poles. For signal and load currents up to 4 A.
|
|
|
The SS Series and SSC Series short plugs feature an innovative design and lightweight, miniature construction for applications requiring space saving and high pin density configurations. The 102 series, for example, is available with up to nine pins in a 9mm diameter.
|
|
|
Mencom Corporation manufacturers a wide range of PVC, PUR, and Hi-Flex quick disconnect cables. The product lines include; standard MIN (M18,) MICRO (M12,) and NAN (M8) cord sets and field wireable connectors. In addition to the cord sets, Mencom also offers a full line of mating receptacles, cable glands, and other accessories.
|
|
|
|
|
|
Current Rating: 3 amps max
Dielectric Withstanding Voltage:
600 VAC RMS
Insulation Resistance:
5000 Meg ohms min @ 500 VDC
Contact Resistance:
26 milliohms (65 mv) max @ 2.5 amps
Mating/Unmating Force:
Forces not to exceed 6 oz/contact
Temperature Cycling:
-55 ° C to +125 ° C, 5 cycles
Humidity (Mated):
IAW MIL-STD-1344, Method 1002.2, Type II, Omit Steps 7A & 7B
Vibration:
IAW-MIL-STD-1344, Method 205.1, Test Condition IV, 20 g's
Mechanical Shock:
IAW-MIL-STD-1344, Method 2004.1, Test Condition E, 50 g's
Durability:
500 cycles
Contact Resistance after Durability:
26 milliohms (65 mv) max @ 2.5 amps
Mating/Unmating after Durability:
Forces not to exceed 6 oz/contact
Salt Spray:
48 hrs IAW-MIL-STD-1344, Method 1001.1, Test Condition B
Low Level Contact Resistance after Salt Spray:
28 milliohms max (2.8 mv) max @ 100 milliamps
Contact Resistance after Salt Spray:
28 milliohms (70 mv) max @ 2.5 amps
Mating/Unmating force after Salt Spray:
Forces not to exceed 6 oz/contact
Contact Retention after Salt Spray:
Minimum of 5 lbs contact retention
Thermal Vacuum Out gassing:
NASA SP-R-0022
Solder Heat & Contact Retention:
360 ° C for 10 sec. & contacts must withstand 5 lbs retention force
Solder ability:
MIL-STD-202, Method 208
|
|
FEATURES
■ Rugged aluminium body to ensure long service life in the
harshest environment.
■ Optimum space and weight saving whilst achieving maximum
strength.
■ Option of either size 22 or 26 gold plated crimp contact or PCB
contact available.
■ Environmental sealing from interfacial seal and rear grommet.
■ Positive locking mechanism with locked colour indicators.
■ 6 colours coded keyway orientations.
■ Boot termination feature.
■ Conductive black zinc plating.
|
|
Audio Miniature Bayonet Lock Connectors
AB06 Series. AB06 connectors are a development of the established AB05 range and are particularly suitable for tinsel cordage applications in audio equipment.
Designed to the requirements of the Royal Signals and Radar Establishment, AB06 connectors are available in shell sizes 8, 10 and 12, and offer all the performance characteristics and design features of AB05 (Pattern 105) connectors. An alternative 'snatch' type coupling nut for quick release applications is available in shell size 10.
Accessories include straight polychloroprene sleeves for tinsel cordage, 90° outlets, and protective caps.
|
|
|
The small yet robust M8 x 1/Ø8 mm round connector is ideally suited for compact and space limited industrial applications. Please choose from pre-assembled and fully encapsulated versions, flange and field-wireable connectors, ranging from 3 to 6-pole versions.
|
|
|
Amphenol provides a broad range of components with presence on more than 50% of the world's annual mobile phone production. Amphenol manufactures essentially all of the interconnect devices found in mobile phones, PDAs and other mobile devices. The broad product offering includes antennas, RF switches/plugs, navigation keys/side keys, microphone/speaker/vibra connectors, LCD connectors, board to board connectors, SIM/MMC/SD sockets, battery connectors, I/O system connectors, charger (plug and socket) connectors and hinges. Our capability for high volume production of these technically demanding, miniaturized products, combined with our speed of new product introduction, is a critical factor for our success in this market.
|
|
Hypertac develops its «H Series » with the launch of a new range of mini-modular connectors for the test and measurement of electronics components, as well of avionics, automotive, industrial and medical interconnect systems. The interactive configurator available on Hypertac web site helps application engineers to select the proper modules and connectors and to integrate them inside their equipment.
The new range of high density Hypertac mini-modular connectors includes 3 new modules. The first one is a universal module which is compatible with all types of contacts according to
MIL-DTL-39029, DIN 41612, etc. The second module has 45 contacts, 0,4 mm diameter, the last one has 10 contacts with 0,6 mm diameter. For the 0.4mm and 0.6mm diameter contacts, the HOM pins are protected inside the insulator, so protecting the male contacts from mechanical shock.
|
|
FEATURES
* Color Coded
* Mechanical Voltage Keys
* Flat wiping contacts
* Genderless Housings
* Auxiliary Contacts - SBE®, SBO® and SBX®
* Fingerproof - SBE®, SBO®, and SBS®
|
|
|
|
|
|
The evolution of technology requires electrical circuits for machine controls to be ever more numerous and complex.
Our company, with more than 40 years experience in the manufacturing of multipole connectors has been involved in the research and design for maximum connection, reliability and speed of installation. We now offer a new series of connectors with a spring self-blocking connection (distinguished in the part number by the letter “S”). These connectors can be used as an alternative to the traditional screw connection.
Termination is achieved by simply inserting the screwdriver, with minimal force, into the rectangular hole, inserting the conductor in the round hole, and finally removing the screwdriver.
This allows a considerable time reduction for wiring, as there is no need to prepare the conductor.
The screwdriver seat can also be used to make a conductivity underload test.
The pressure applied by the spring on the conductor is not dependent upon pressure by the user, and can be used in applications with vibrations (as for the rolling stock material).
A particular innovation is the new series of “CSS” inserts, in that each contact can be connected at the same time with two wires.
The spring connection inserts are suitable for cables from 0.14 to 2.5 mm2. They have the same electrical characteristics as those of the traditional screw versions and can be coupled with the screw inserts and mounted in the same enclosures.
|
|
The modular design of the LEMO range provides over 50'000 connectors from miniature ø 3 mm to ø 50 mm, capable of handling cable diameters up to 30 mm and for up to 106 contacts.
This vast portfolio enables you to select the ideal connector configuration to suit almost any specific requirement in most markets, including medical devices, test and measurement instruments, machinery, audio video broadcast, telecommunications and military.
|
|
|
|
Data transfer connectors: 
