|
|
• Power supply: from 24 to 230Vac;
from 12 to 110Vdc (with converter)
• Rotation speed: from 1s to 800h
• Available contact: from 1 to 20
• Available cams: screw adjustable, pins
cam, fix cams cutted or injected as
per customer diagram
• Mounting: wall mounted, panel mounted,
DIN rail 35mm
|
|
|
For the customer that needs a simple timing/control device we offer this widest range of Cam Timers. Up to eight stations with the choice of either synchronous or intrinsically safe pneumatic motors, both drives have extensive gearbox ratio options. This rugged system gives huge flexibility to the OEM designer.
|
|
PRI-32:Monitoring current relay until 20A
* current transformer is a part of the product. Inside this transformer there is a wire which senses the volume of flowing current
* this construction decreases temperature when compared with conventional solutions with inbuilt shunt, and increases current range up to 20 Amps, and galvanically separates monitored circuit
* for heating bars in sliding rails, heating cables, indication of current fl ow, controlling of 1-phase motor consumption ...
* universal supply AC 24 - 240 V and DC 24 V
* supply is galvanic separated from measuring current
* current exceeding – current fl owing through monitored wire must not exceed 100 A
* output contact: 1x changeover 8 A
* clamp terminals
* 1-phase, 1-MODULE, DIN rail mounting
|
|
Wide range of versions:
• Power supply: from 24 to 230Vac;
from 12 to 110Vdc (with converter)
• Mono and multiscale
• Mounting: wall mounted, panel moun
ted, DIN rail 35mm
• Connections: screw, 8 pins, 11 pins,
faston
|
|
CRM-61:Multifunction time relay
* multifunction time relay (6 functions and 6 time ranges), cost eff ective version of CRM-91H
* to be used for electrical appliances, control of lights, heating, motors, pumps, fans, etc
* 6 functions:
- 3 time functions controlled by supply voltage
- 3 time functions controlled by control input
* comfortable and well-arranged function and time-range setting by rotary switches
* time scale 0.1 s - 10 hrs divided into 6 range:
(0.1 s - 1 s / 1 s - 10 s / 0.1 min - 1 min / 1 min - 10 min / 0.1 hrs - 1 h rs/ 1 hrs - 10 hrs )
* universal supply voltage: AC 24-240 V, DC 24 V
* output contact: 1x changeover 8 A
* output indication: multifunction red LED, which fl ashes or shines in dependance on output status
* 1-MODULE, DIN rail mounting
|
|
Key Features
GT5P: Specify time range per model
GT5P: SPDT (8 pin octal)
GT5Y: DPDT or 4PDT (.110" blades)
GT5Y: Four time ranges per model
GT5Y: Uses the same sockets and hold-down clips as IDEC's RY4S and RU series relays
Control settings by hand or screwdriver
Power "On" and timing "Out" indicating LEDs
|
|
Key Features
GT5P: Specify time range per model
GT5P: SPDT (8 pin octal)
GT5Y: DPDT or 4PDT (.110" blades)
GT5Y: Four time ranges per model
GT5Y: Uses the same sockets and hold-down clips as IDEC's RY4S and RU series relays
Control settings by hand or screwdriver
Power "On" and timing "Out" indicating LEDs
|
|
|
|
|
|
This versatile time relay has 8 modes of operation, 9 timing ranges and a large easy to read LCD display with numerical information. The display carries a wide range of internationally understood annunciators to indicate all the modes, direction of timing and the status of the output at all times.
Simple programming via menu driven display.
- Large, easy to read LCD display.
- 8 timing modes: ON DELay (ON DLY), OFF DELay (OFF DLY), One Shot (OS) and Single Shot (SS). Repeat Cycle (RC) modes: Delay, Cycle, Symmetrical Delay and Symmetrical.
- 9 timing ranges from 0.2 seconds to 99999 hours.
- Internationally understood annunciators for operating modes, time units, low battery, relay output state and trigger type.
- Self powered with 10 year battery life or 10 6 operations (customer replaceable lithium battery).
- Opto-isolated inputs 12 - 260VAC or DC.
- Three different triggering mechanisms.
- Relay contacts rated at 8A, programmable to NO or NC.
- Environmental protection to IP65.
- CE approved, UL and cUL pending.
The timing input can be LEVEL TRIGgered, EDGE TRIGgered or EDGE RETRIGgerable. The essence of RE-triggering is that subsequent pulses on the timing input can start a new timing cycle. Time is on the Main Display and the Set Time on the lower display.
|
|
|
Timers from TELE, ranging from the simple single-function through to the multi-function timer with display, are employed in all branches of industry. The brain chip of your application-specific miniature controller is the ideal solution for realizing custom control applications within minimum space at low-cost. Various voltage ranges or even zoom supply are available to permit worldwide application.
|
|
|
Designed with attention to every detail, IDEC Relays go the extra mile in performance and dependability. RU relays are constructed with no internal wiring in a 100% automated, robotic-assembly process, which for you means no weak solder points. Our RH relays are built-to-last and 3rd party tested at 500,000 operating cycles, even though UL approval only requires an electrical lifespan of 6,000 cycles. And the newest addition to our relay family is no exception. RJ relays have an optional green, non-polarized LED that uses a unique light guide to give you a brighter and more noticeable status indicator, viewable from multiple directions
|
|
On delayed timers
Off delayed timers
Multifunction timers
Flasher timers
Fleeting action timers
Cyclic timers
|
|
|
|
|
|
Relpol S.A. as widely recognized relays manufacturer, is widening the scope of offered products by introducing new multifunction time relays MT-TUA-17S-11-9240 and MT-TUB-17S-11-9240. Products will offer possibility of various functions to choose from, ie : measuring one set time value "T" or seven different relays - each with different function having the possibility of setting two independent times T1:T2. Such solution is rather rare in similar product range of other producers and can only be found in more expensive and advanced time relay or monitoring relay models.
Among others in our new product family, you will also find MT-TSD time relay designed especially for controlling contactors in "Star-Delta" sets used for switching 3-phase electrical engines.
Outputs of our new time relays are designed to bear high loads, for example - in Category AC1, the load for single contact will be 16 A / 250 AC.
The Advantage of new time relays is the possibility of time settings modification while the circuit is working without switching off /on the supply voltage.
|
|
- multifunction and single-function time relays;
- lot of time functions and time ranges;
- industrial and module housing,
- AC and AC/DC input voltages: wide voltage range: 12 ÷ 240 V AC/DC
Multifunction time relay TR4N
|
|
NEW version of Multifunction Time Relays TR4N
TR4N: 10-functions electronic time relays in compact cover.
Cadmium - free contacts, AC and AC/DC input voltages.
They are designed for direct mounting on 35 mm DIN rail mount, EN 50022 (wiring: 1 x 2,5 mm2, 2 x 1,5 mm2).
Among the available functions two are very interesting:
- PWM function - Pulse with Modulation,
- B function - Flasher with Control Contact, for which each consecutive pulse from the control contact reverses the position of contacts (a feature of bistable relay).
The main advantages of this application:
- simple selection of the performed function,
- possibility to control one or two circuits (1 or 2 changeover contacts),
- esthetic design in the control cabinet.
The switching capacity of contacts as in RM85 (1C/O) or RM84 (2C/O) electromagnetic relay.
Compliance with standard: PN-EN 61812-1.
Recognitions and certifications: CE, GOST.
Recognitions pending: VDE, UL, cUL.
|
|
|
TEC AUTOMATISMES offers universal timer relays able to answer the whole range of your requirements (very wide timing ranges, multifunction).
|
|
Main Features
5 functions
6 timing ranges, from 0.3sec. to 30min
Electronic circuit with high precision and immunity to noise
Compact, 22.5mm width, mounted on a DIN rail 35 mm or with screws
Illuminated indication (LED)
Description
WEG RTW timing Relays are electronic devices that allow, based on time setting, commutation of an output signal according to its function. Very much used in industrial machines and processes like motor starts, control boards, industrial ovens, injectors, among others.
They have digital electronics that provide high precision, acurancy and immunity to noise. Design according to international standards, the RTW provides a compact and safe solution, in 22.5mm width frame for mounting on DIN Rails 35mm, in configurations with 1 or 2 NO/NC outputs and 110-130V 50/60Hz, 220-240V 50/60Hz or 24Vdc supply.
With timing ranges, the RTW can be set from 0.3 seconds to 30 minutes with high reliability and acurancy.
|
|
SAM Static Timing Relay
SAM Static Timing Relay
The SAM series of relays provide highly accurate and repeatable timing functions that produce a contact closure after a selected time delay has expired. The total time delay consists of the set time delay added to the operating time of the associated output relay (typically 2-6 ms).
|
|
Analogue Solid-State Timers
The largest electronic analogue timer program available on the market. This range includes a 17.5mm timer (H3DS), a 22.5mm timer (H3DE) and a front panel/plug-in 48x48mm timer (H3CR). Where space is limited, Omron provides two very compact ranges, H3RN and H3YN.
Digital Timers
Electronic digital timers are very suitable for accurate settings and control. Omron's H8GN is the world's smallest 48 x 24mm electronic digital timer. In the 48 x 48mm range Omron has an advanced version (H5CX), with a two-colour display.
Motor Timers
Omron's range of motor timers includes the miniature, high-performance motor timer H2A, the 48 x 48mm DIN-sized model H2C with variable time ranges and the mechatronic analogue timer H3AM which has an easy-to-see large setting dial with moving pointers.
PCB Timers
Omron's H3FA DIP model timer for PC-board use provides contact and solid-state output.
|
|
|
Timers are used in applications where time is the main focus. To make a process more efficient, effective or safe, timers are used to determine how long a machine has been running in order to schedule machine maintenance.
|
|
General description:
The PMH is a dedicated Power On-Delay timer with a front panel dimension of 50mm high by 36mm wide. It has tubebase pin terminals, easy-set dial, and two 10-amp Form C relay output contacts.
|
|
|
Panasonic offers a broad line of digital and analog timers which are well suited to a wide variety of machine and process control applications. Our timers are available in single function-multirange, multifunction-single range, and multifunction-multirange configurations. Panasonic timer products are of the highest quality and offer an outstanding value!
|
|
Preselection and multifunction up/down counters 48x48 - CPT4
Totalizers - LCD 24 x 48 (Hour counter/chronometer)
Totalizers - LCD 24 x 48
Total/partial impulse counters - LCD 24 x 48
Hour counters - LCD 24 x 48
Electro-mechanical hour counter CH 48 G
Electro-mechanical impulse counters totalizing - 24 x 48
Electro-mechanical impulse counters totalizing - 36 x 37
Electro-mechanical impulse counters totalizing - 36 x 48
|
|
Wide range of versions:
• Mono and multivoltage
• Monoscale, biscale and multiscale
• Mono and multifunction
• Mounting: wall mounted, panel mounted, DIN rail 35mm
• Dimensions: modular 17,5 and 22,5mm, frontal 38x38, 38x48, 48x48mm
• Connections: screw, 8 pins, 11 pins, faston
|
|
A timer is often needed for use with the CSU600A current supply unit or ODEN A primary current injection test
system. Testing relays with SVERKER 650 also requires an extra timer if more than one timing cycle is to be
measured.
Timer TM200 is ideal for these tasks thanks to its precise accuracy, its broad application range and its compact
dimensions. Timer TM200 is the obvious choice for maintenance work in substations
|
|
|
Counters & timers are the basic tools widely used in automation process of various industries. Autonics offers the wide range of industrial counters and timers, designed, manufactured and tested to meet the most demanding worldwide standards and ratings. They also offer reliable design, quick replacements, panel space-saving and solutions that offer increased functionality, flexibility and performance.
|
|
PRESENTATION
- Digital electronic timer to replace the electromechanical timer reference 88270 of CROUZET.
- Several available models :
- Pluggable on socket or front panel and clips.
- Power supply : 220Vca, 48Vdc, 24Vdc, etc.
- 1 or 2 C/O timed and/or direct
- With memory: in the even of cut-off power supply, the timing begins where it was. (See table of various existing models)
FUNCTIONS
- Red lighted display 4 numbers 7mm of the actual value
- Display of the programming time
- External supply visualization
- Programmable timing functions
- 10 times ranges
- Timing from 0,01s to 9999h
- Count up or count down mode
- State visualization of the contact out.
- Output relay 1C/O (48V) or 3C/O (220V)
- Program locking by inaccessible switch under normal operation.
- Internal power supply by lithium battery (minimum life 10 years at 20°).Ž
|
|
Profile:
Eagle Signal™ - is a reputable leader in time delay relays and electronic timers and counters, including preset, elapsed time, reset and repeat cycle timers, sequencers and related accessories for rugged and reliable production monitoring of industrial manufacturing applications for over 70 years. Ranging from our popular electromechanical to powerful microprocessor-based control timers, Eagle-Signal offers a full range of panel mount timers as well as time delay and general purpose relays. Eagle-Signal timer products became a division of Danaher Industrial Controls Group in 1992.
Products:
Factory Automation & Feedback Controls: Electronic, Electric and Electromechanical Event Timers & Indicators
|
|
|
IMO's range of timers gives you the choice from the Din mounted versions to the 8 and 11 pin plug in versions. Units are available with a single mode or a multi function mode.
|
|
|
OMRON provides a range of Analog Timers and Digital Timers, as well as Time Switches for 24-hour, weekly, or annual time control.
|
|
Digital timers designed for the user with easy-to -read displays and multiple functions for every timing application
Economical and Operator Friendly Analog Set Timers with Multiple Time Ranges and Functions for Every Timing Application
|
|
|
|
Time delay relays, Timers
