|
|
Pendant Overview Directory
• Flexitite Push Button Stations
Crouse-Hinds Flexitite Pendant Push-Button Stations are steel reinforced, molded neoprene units designed for safer, low maintenance control of overhead cranes and hoists. They are available in two, four, six and eight buttons, single- and two-speeds, A. C. or D.C.
• Multi-Speed 6 & 8 Button Stations
• Side Mounted Toggle Hoist Switches
Molded neoprene enclosures. Rugged style provides qreater operator safety and resistance to chemical fumes, water, dirt and all other industrial environmental hazards. Up-down legend permanently molded into the side of switch. Rating to 250 volts, 10 amp.; switch permanently wired and molded to cord.
|
|
Pendant Switch
Remote hand held pushbutton switch with coiled cord that extends to approximately 4 feet.
Rating: 10 A resistive at 28 VDC
Circuit: SPNO-DB
Housing: Black Nylon
Button: Black Nylon
Cord: Black Polyurethane
Moisture-Proof Mini with Sealed Connector
The button is only .440 in. diameter. Back of panel cable is sealed at the switch and at the terminals. The cable is protected with split convoluted conduit. Button is black nylon. Case is black anodized aluminum alloy. Body is molded of black PPS.
Grip Switch Assembly
Switch is built into a grip designed for rugged outdoor use. Automotive type connector.
Rating: 5 A resistive at 28 VDC
Circuit: SPNC-DB
Housing: Black Nylon
Button: Black Nylon
Cord: Black Polyurethane, 20 AWG
Left and right hand operation with various connection types available.
|
|
APEM piezo switches, PBA series
- Sealed to IP68 and IP69K once mounted on panel
- Easy to clean metal surface
- Very long life (50 million cycles)
- 316L stainless steel models for the food industry or harsh environments
- Custom laser etching
- 16 or 22mm bushing diameter
- Available in a wide array of colours: natural, blue, green, gold or red anodized, stainless steel.
- Ring or dot illumination
Applications: food industry, humid environments (swimming pool, SPA, car cleaning centres), medical equipment, chemical industry, machine-tools, home appliances…
APEM, the broadest offering in the switch market: miniature switches, industrial switches, LED indicators, professional switch panels and professional joysticks
|
|
TH-Contact piezoelectric switch
Characteristics:
• piezo technology
• momentary
• sealed IP68
• with or without illumination, two colors
• solid state output
• NO
Rating: 3 to 35 VAC/VDC, 200 mA
Actuator:
• housing in different colours
Approvals: none
|
|
|
|
|
|
|
Description: Piezo film’s capabilities to generate a high voltage output under bending strain, combined with its rugged form factor, make it an ideal candidate for solid state impact switches. Rather than using a switch contact closure, the piezo film generates a pulse which is detected by electronics. Although many of the DT’s, LDT’s and FLDT’s supplied by Measurement Specialties are used for switch applications, it is sometimes convenient to have a switch with integrated electronics. The SW100 is an ideal configuration for impact detection and momentary switch applications. A direct contact force on the tip of the stainless steel cantilever beam of the SW100 induces strain on the laminated Piezo Film Sensor (PFS) element. With dynamic strain, the PFS element generates an output that activates a built-in, normally-open circuit. Once activated, the circuit resembles the closure of a contact switch, but without the inherent discontinuity that contact points exhibit because of corrosion, pitting and bouncing. Thus the SW100 provides a single digital pulse that is ideal for triggering digital circuits and signal processing. The imperviousness, elasticity and reliability of the PFS element, along with the noise rejection characteristics of the circuit, combine to provide the SW100 with features that suit applications demanding consistent, reliable performance throughout tens of millions of switching cycles. Custom options are available to fit specific customer applications. For more information on the SW100, please call one of our applications engineers.
|
|
|
Programmable Piezo switch for water management, IP68 Dust & Water proof rated. Ideally use indoor (Prisons, Sport halls, Elderly houses) and outdoor highly traffic areas (Swimming pools, Beaches, Public showers). Easy to program the operating time. An automatic flush for pipes cleaning every 72 hours.
|
|
Designed with the special demands of today's electronic control applications in mind, encoders provide an outstanding array of potential solutions. Since they use an integral printed circuit board, encoders offer an option for including either SMD or through-hole components as part of switch solution. Additionally, switch outputs may be sequential, BCD coded, gray coded, or customized in a virtually endless variety of ways.
HACO series features:
5-bit digital output
Universal encoder
Integrated double pole main switch available
Isolated contact system to protect against dust
Up to 24 or 26 positions
BCD and Grey Code selection
Easy connecting with egde connectors
ROHS compliant
|
|
P1, P3 and P5 Switch Disconnectors up to 315 A –
For Absolute Safety
Like T rotary switches, P switch disconnectors are manually operated switching devices without any release or switch mechanism but with a direct link between manual operating element and the contact. The contacts are positively opened on de-energization, and the auxiliary contacts are interlocked opposing contacts.
Switchable "N conductors" and/or "HI21 auxiliary contacts" can be connected to the P1, P3, or P5 switch disconnector with a make and break contact. The auxiliary make contact is always switched as a load shedding contact for control of the contactor. In this manner, the contactor assumes the switching task and the switch-disconnector only needs to disconnect the main current circuit.
|
|
|
Wide range of rotary switches, with different mounting solution available, from 4 to 16 positions, ideal for ovens and cookers, with electric rating up to 16A. Rast5 multiple connection available, to make easier the wiring and to avoid polarization mistakes, and multiple connections available for accessory uses (i.e. pilot lights). Capillary thermostat or encoder integrable.
|
|
• Ratings up to 16A, 250V ac
• Pairs of single pole changeover contacts
• Can be stacked together
• Wide choice of terminals
• Pull-cord version
• RoHS compliant
|
|
|
Multi-position rotary switches available in 5 package configurations and up to 24 positions. Panel mount and PC mount versions and accessories
|
|
Keyswitches and authorisation keyswitches
* Mounting hole diameter 16.2 mm
* Collar type round or rectangular
* Max. 42 V / 100 mA
* Solder terminal or PCB plug-in socket
* Fixed to the front plate with threaded ring
* Design suitable for LUMOTAST FK and LUMOTAST 75 IP 40
|
|
|
The GE family of rotary switches provide a comprehensive selection to meet the requirements for the Appliance and HVAC markets. GE Appliance Controls will develop switch specific to your application using our wide variety of mounting options, circuit capability, and shaft configurations. The switches are UL and CSA approved and designed for extended life.
|
|
AN
Dimension-
20.2 X 3.5 (mm)
Electrical Service Life-
Rotation: Min. 2,000,000 operations
Center Push: Min. 1,000,000 operations
Typical Application-
Electric Devices, Audio/Vedio system,
Projector, Business Machine
|
|
FR01 (submini)
10mm Rotary DIP Switches
HS (standard)
Standard Size Rotary Switches
MRA (miniature)
1/2" Dia. Washable Logic Level Rotary Switches
MRB (miniature)
Logic Level Rotary Switches
MRF (miniature)
1/2" Dia. Washable Logic Level Rotary Switches
MRK (miniature)
1/2" Dia. Washable Logic Level Rotary Switches
MRT (miniature)
Power Level Rotary Switches
MRX (miniature)
Power Level Rotary Switches
MRY (miniature)
Power Level Rotary Switches
ND (ultra-mini)
8mm DIP Rotary Switches
PS (hi cap)
30A Rotary Switches
TS (standard)
6A Rotary Switches
|
|
|
|
|
|
Features:
* Sealed watertight per IP68.
* Snap-in panel mounting into industry standard 1.45 x .83 panel cutout.
* Unique lighting options up to three independent LED light positions.
* Lighted button.
* 3 positions in all combinations of momentary and maintained action.
* Termination options include .250" fast on, solder lug or a snap on modular connector.
Used in the heavy equipment, marine, process control and instrumentation markets the R2 rotary switch is an excellent replacement for rocker switches offering improved visual position indication, additional lighting options and different styling opportunities on front panels. The R2 series is a sealed, lighted rotary switch which snaps into a 1.45 x .830" industry standard rocker switch panel opening. The rotary knob snaps on to a shaft and can be installed by the panel builder for those desiring that flexibility. The R2 rotary switch provides 3 positions in all combinations of momentary and maintained action. It is capable of handling loads from logic level to 20 amps (resistive). Sealing is to IP68 (1 meter immersion) via a shaft o-ring seal in front and a potted base in the back. Termination options include .250" fast on, solder lug or a snap on modular connector. The R2 offers unique lighting options including up to three independent LED light positions which illuminate a lens on the rotary knob. The bezel and the knob can be pad printed, sublimated or laser etched with symbols and legends as needed. This design provides more legend and lighting options than traditional rocker switches, handles the full range of electrical loads and is robust enough to survive in the most demanding applications.
|
|
General Description :
Slim . 150" (3.8mm) body has the lowest profile in the industry and allows close stacking of PC boards.
Highly visible legends and screwdriver actuator with arrow position indication provide trouble-free code setting.
Detent mechanism gives crisp, positive action for accurate switch setting.
Use of heat resistant resin allows infrared convection reflow soldering.
Gull-winged terminals ensure mechanical stability during soldering and simplify solder joint inspection.
Cam activated movable contact and gold contacts assure contact reliability and continuity.
Tape-reel packaging meets ElA-481-2 Standard.
Coplanarity: all considered surfaces must lie between two parallel planes that are a maximum distance apart of .0059" (0.15mm). (Additional coplanarity details in Terms and Acronyms in the Supplement section.)
|
|
Slide Switches
• Ratings up to 16A, 250V ac
• 2, 3, 4 and 5 positions
• 2 way, voltage selectors
• PCB and solder terminals
• Wide choice of circuits
• Wide choice of actuators
• RoHS compliant
|
|
AS (submini)
Subminiature Slide Switches CS (miniature)
Power Rated Slide Switches
FS (miniature)
High Frequency Slide Switches JS01 (submini)
Through-hole DIP Switches
JS02 (submini)
SMT Extended Actuator Slide DIP Switches JS03 (submini)
Through-hole Piano DIP Switches
JS04 (submini)
SMT Flush Actuator Slide DIP Switches MS (miniature)
Miniature Slide Switches
SM (ultra-mini)
Ultra-miniature Slide Switches SS (ultra-mini)
Through-Hole & Surface Mount Switches
|
|
|
|
|
|
Honeywell MICRO SWITCH™ Basic Switches
The switch is on. Our snap-action basic switch is simple, superior, durable, and irreplaceable. Globally compliant and known worldwide for their compact and lightweight design, MICRO SWITCH™ snap-action switches are designed for accurate repeatability and extended life. MICRO SWITCH™ Basic switches are designed for presence and absence detection where physical contact with an object is permissible. They also excel in applications requiring simple on-and-off actions.
The Premium families of MICRO SWITCH™ Large and Subminiature switches were designed for high-precision applications where the cost of a switch failing is high. Originally developed to support United States aircraft in World War II, advancements in packaging and operating controls have helped further expand applications over the past 75 years while maintaining enhanced accuracy and repeatability.
Our Standard families of Basic and Miniature switches include our V15 series, and are designed with the same high quality standards, but for low cost-of-failure applications — ones where the cost of replacing the switch is less than the total cost of a switch failing.
|
|
|
|
|
|
The DIN EN ISO 13849-1 machine directive tightens the safety rules for machines and equipment. In order to achieve the required safety integrity levels, the safety-related components of the control systems must, in some circumstances, be designed redundantly. To accomplish this, safety switches can, for example, be installed doubled or additional PLCs installed for monitoring.
Schaltbau offers an economical alternative with its S850 snap-action switches: the double break contact unites two safety switches in one compact housing. It is an elegant solution for control system constructors who want to increase the safety level without having to invest in additional hardware, installation or programming.
The S850 can simultaneously open two galvanically separated safety circuits with a delay of less than 3 milliseconds. The two fixed contact pairs are closed by one bridge each when inactive. The two contact bridges are attached to one plunger and therefore mechanically linked. As soon as the switch is actuated, the snap-action mechanism is activated and pulls the plunger and the contact bridges upward. If the contacts become welded together and the snap mechanism is made ineffective due to a short circuit, the positive opening levers push the plunger upwards so that both circuits can be opened reliably in any event.
|
|
Features
- 5 current ratings
- Choice of actuator styles
- 3 terminal types (optional screw terminals available - consult factory)
- 3 contact arrangements
- Long-life coil spring mechanism
- High-temperature 150°C and 200°C available on select models (consult factory)
- Includes E13, E14, E29, E30 and G13 Series.
|
|
|
|
|
|
S Series Snap Action Switches
The S Series product group expands Eaton's snap action switch portfolio to cover all major amperages and operating forces.
A wide range of sizes and options gives customers the ability to select the most appropriate switch for their specific application.
Typical applications include computers, consumer electronics, small appliances, power tools, vending machines and packaging machinery.
Ultraminiature
The SC Series offers the smallest size with ratings of 0.1A and 3A.
A choice of operating forces, terminations and lever combinations is available.
Subminiature
Slightly larger than the SC Series, the SE/SEV Series offers more options in operating force, termination, and lever style. This series also offers a 1PDT circuit and a 1PST circuit with either NO or NC terminals. The SEV version
has VDE microgap approval.
Subminiature Waterproof
The SF Series is ideal for applications where the switch is subject to submergence of water or poor environmental conditions. It has one current rating and operating force but a variety of terminations and lever
combinations. A 1PDT circuit and a 1PST circuit with either NO or NC terminals is available.
General
The SG Series is the standard size snap switch with amperages from 0.1A to 15A, and a variety of operating forces.
With VDE approval, the SGV Series has a contact distance of larger than 3mm.
Low Torque
The SJ Series is the low torque series designed to meet applications where a light actuating force is needed.
A selection of operating forces and lever combinations is available.
|
|
Features/Benefits:
- Low differential travel, high repeatability
- Long life-150,000 cycles typical
- Single and double pole circuitry
- Sealed actuator and case
Typical Applications:
- Thermostats
- Motors
- Industrial controls
|
|
|
The turquoise stroke switch ASQ is based on a completely new type of contact system. By using sliding contacts, an extremely high overtravel of 2.5mm is achieved at optimum contact force, which greatly simplifies the installation and adjustment of the turquoise stroke switch. Furthermore, the ASQ turquoise stroke switch is bounce-free and hysteresis-free. Thanks to its IP6K7 protection class, it is ideally suited for a great variety of industrial and automotive applications.
|
|
The Hygiemag WMR Magnetic Non Contact Interlock Switches offer a wide industry robust fitting and provides environmental protection up to 105°C.
The housings are fully Stainless Steel 316 with mirror polished finish and they are designed to cope with the rigours of CIP and SIP cleaning in food processing industries. (IP69K High Pressure Chemical Cleaning).
In addition to the high specification enclosure the switch offers a wide 14mm sensing distance, a high tolerance to misalignment, provides up to 2NC 1NO power circuits (up to 2A.) and will connect to most popular Safety Monitoring relays to provide up to Cat. 4 EN 954-1.
Features:
Fully Stainless Steel 316 housings
Mirror polished finish
High Mechanical Life
IP69K enclosure protection - High Temperature Cleaning
Wide robust fitting - 30mm wide
M12 Flying Lead connector versions
|
|
Features
- High-precision switch with high repeat accuracy
- Models available for operating temperatures up to 120°C
- Rated for currents up to 10 amp at 250VAC
- Range of auxiliary actuators available (can also be retrofitted); two mounting positions
- Variety of contact materials available to suit your application
- Mechanical life: up to 15 x 106 operations
- Wide variety of terminal types available
- Numerous approvals
|
|
- Connector industry PCB, solder terminal lugs or PVC cable
- Conforms to standard IP 67
- Silver or gold-plated contacts
- Wide choice of levers
- Operating temperature up to 130°C / 266 °F
|
|
The sealed sub-miniature MP420 microswitch is a simple snap-action
changeover switch, which is connected by means of a cable directly, overmoulded into the housing.
|
|
saia subminiature waterproof micro-switch
Caractéristiques :
• div. chevilles de fixation
• bornes à souder
• raccordement rapide de 2,8 mm
• bornes pour CI
• div. formes de levier possibles
• étanchéité IP67
Pouvoirs de coupure : 250 V/CA, 5 A
Dimensions (mm) : 20 x 17,5 x 6,4
Organe de commande :
• poussoir
• levier plat
• levier à galet
Homologations : UL, CSA, ENEC
|
|
|
|
Miniature switches and Micro-switches for electronics
