Output voltage: 24 V - 660 V
Output current: 80, 100, 125 A
... Food and Beverage | Packing Industry | Panel mounting solid state relays | Products | Solid state relays Technical Data Input voltage led Zero crossing commutation Peak voltage up to 1600 V UL certification 4000 ...
EL.CO.
Output voltage: 12 V - 265 V
... 1-pole PCB mount SSR, Zero-cross switching, Rated current (Ie): 5.5 Aac, Packed x10 Output switching mode Zero cross Number of poles 1 Rated current AC-51 5.5 A Rated current AC-53a 5 A Control voltage AC 16 V ... 32 ...
Switching current: 2.5 A - 5 A
... Electromechanical Relays (EMR), and the dual channel configuration, ASSR-1420, is equivalent to 2 Form A EMR. They are available in 4-pin SO, 6-pin DIP, 8-pin DIP and Gull Wing Surface Mount for DIP packages. The ASSR-14XX electrical ...
Output voltage: 30 V
... The IA-3121 is an intelligent 32 Relays (Solid State ones), module, controlled by Dazy-chain RS-232 Communication method, and is a part of the IA Multi system Series. This module has been especially designed for Inductive Loads, and for ...
... cleaning equipment and other applications requiring high starting torque for motors from 1/2HP to about 3HP. RVA potential relay is designed to start single-phase motors which employ both start and run capacitor (CSR and CSIR configurations) ...
Electrica s.r.l.
Output voltage: 230 V
Output current: 0 A - 6 A
... • PLC transistor output to power switching converter • common positive or negative • LED indicators for output relays coil voltage nominal voltage +10% / -15% duty cycle 100% screw tightening torque 0,6...0,8Nm operating ...
HIQUEL
Switching current: 10 mA - 6,000 mA
... Industrial Plug in Relay 2 pole contact with rating of 6A @ 250 VAC1 / with Electrical Life of 100,000 operations for Low Switching Signal FEATURES & FUNCTIONS • Simple construction • High contact switching ...
ELESTA
Output voltage: 24 V - 480 V
Output current: 10 A - 120 A
Width: 44.8 mm
... Solid State Relay (SSR)is industrial control appliance that uses power semiconductor devices for the main control part, compare with traditional magnetic contact industrial controllers, it is a higher-powered, intelligent, digital, systematic, ...
Switching current: 10, 15, 25, 40 A
Output voltage: 3 V - 32 V
Output current: 5 mA - 50 mA
... Series DD Solid State Relays are AC relays, triac Output. The triac version of the zero switching relay is an inexpensive solution for resistive loads. The zero switching ...
Output voltage: 250 V
Output current: 10 A
... The JQC-3FF is a subminiature high-power relay commonly used in a variety of applications. It is a general-purpose, high-current relay that can switch loads up to 10A at 250V AC or 30V DC. The JQC-3FF has a small form ...
NINGBO ZETTLER ELECTRONICS CO., LTD.
Output voltage: 230 V
Output current: 20, 40 A
... The solid state relay performs as a contactor: a voltage application (between 2 and 32 VDC) on the control drives the transistor functional and powers the electrical charge. Technical features CMOS technology Top protection in ...
iNOReA
Switching current: 16, 35, 50 A
... RVA potential relay is designed to start single-phase motors which employ both start and run capacitor (CSA and CSIR configurations) for high starting torque.The most frequent applications include air conditioning, commercial refrigeration, ...
NINGGUO CITY SHARE ELECTRONIC CO., LTD.
Switching current: 20 A
... The 295 Series, manufactured by Deltrol Controls, is a power relay that is integrated with a rated current that ranges from 15 up to 50 amperes and a total temperature of 155°C. This is used in a wide range of applications involving ...
Deltrol Controls
... Start relay for starters – solenoid Completes the circuit that brings electric current from a vehicle's battery to the starter motor of the engine. Mounted in heavy duty vehicle engines. Designed and manufactured in Iskra Mehanizmi. Several ...
Switching current: 100 A
... 1. Character Meet to IEC62055-31-2005—UC2 UC3 According to RoHS requirements Large switching power with mini body Big strengthof magnetic latching power,anti-shock of vibration Pulse drive,economy of power consumption and ...
Switching current: 30 A - 40 A
... Analogue Input Solid State Relay ( SSR ) REVO SSR Analogue Solid State Relay is suitable for resistive and medium or long wave infrared loads Current range depend by the heatsink and ...
cdautomation
Switching current: 10 A
... Series 31(1R/2R) Mounting Style: Plug in Contact Form: 2C, 3 C Rating: 10 A at 24 VDC/230 VAC Coil: 6-220 VDC, 6-230 VAC ...
O/E/N India Ltd.
Switching current: 10 A - 75 A
... The ARD 2410 is a 389 Volt-solid state relay that is optically fitted for 2500 VAC isolation in the middle of input and output circuits. It can load current ranging from 10 to 75 A and is generated by IC namely Transistor–transistor ...
ARICO Technology Co., Ltd.
Switching current: 5 A
... Alternating relay for two pumps - Pressure switches and level float switch - 2 relay outputs - Level alarm - Dual voltage supply 230/400VAC - Plug-in into 11-pin socket Codes and references - 10000142 TA2R-230/400 Specifications - ...
Toscano Linea Electronica
Switching current: 0.1 A - 2 A
... CMOS compatible -For interface application between PLC and external loads -DIN Rail mounting - Easy to replace pluggable SSR - Relay Socket Protectin Degree:IP 20 ...
Connectwell Industries
... another when it senses low or abnormal air pressure. Designed as an accessory for valve positioners, it enables controlled
switching and actuator locking.
Features
- Automatically switches pressure flow when low
... Product description
The YT-530 is a snap-acting
relay designed for valve positioner accessory applications. It redirects pneumatic flow between output ports when low or abnormal air pressure is detected, enabling safe and reliable ...
Switching current: 25, 50, 15, 90 A
... of static relay in the world of industry • 24 Vdc or 230 Vac control • ON status LED • Protection against overvoltages THYRITOP 100 static contactors The THYRITOP 100 models operate in BURST firing mode with logical control. The ...
Output voltage: 3 V - 26.4 V
... As well as being slim and thus saving panel space, G3RV relays are very strong, have a large contact area and non-bendable pins. Power switching in G3RV relays with DC outputs is managed by a MOSFET in ...
Switching current: 120, 200 A
Width: 33, 65 mm
... bi-stable and latching relays of the Johnson Electric ZR product line are custom-built to deliver the highest electrical performance in a compact package. Our compact bi-stable relays utilize innovative technology ...
... maintenance costs. They offer greater shock/vibration resistance than electromechanical relays and better voltage isolation versus solid state relays. These multi-pole relays have pilot duty inductive ...
... Zero-voltage switching for 1-phase alternating voltage for switching resistive and inductive loads ...
Switching current: 10 A - 100 A
Output voltage: 250 V - 480 V
... power needed for switching make the solid state relays a perfect choice when high control accuracy is fundamental. - Internal snubber for dv/dt protection - Switching at zero crossing - Switching ...
Novus Automation
Switching current: 100, 200, 300 A
Output voltage: 480 V
... switch loads up to 300 A. - Internal snubber for dv/dt protection - Switching at zero crossing - High switching speed - High noise reduction - Requires minimum power for switching - Heat sink ...
Novus Automation
Switching current: 40, 90 A
Output voltage: 40 V - 530 V
... The Solid State Relays (SSR) are electronic devices used for switching resistive or inductive AC loads with many advantages over the conventional relays. A control voltage applied to the device INPUT ...
Novus Automation
... suspended in a well or tank. The B/W 5200 Series solid state relays are offered in two basic types for use in a wide range of low and high sensitivity applications. Both 5200 solid state relays are designed to operate ...
Switching current: 25 A - 125 A
Output voltage: 480, 230, 600 V
Width: 44.8 mm
... Solid state relay without heatsink DIMENSIONS - 58.2 x 44.8 x 28.8 mm RATED CURRENT - Up to 100 ACArms and 600 VAC SWITCHING - zero crossing or instantaneous 2 INPUT RANGES - 3… 32 Vdc and 20…280 Vac/22÷48 ...
Switching current: 20 A - 85 A
Output voltage: 600 V
... Solid state relay with heatsink and varistor DIMENSIONS - from 17.5 mm up to 70 mm RATED CURRENT - Up to 85Arms VOLTAGE - up to 600 Vrms CONTROL VOLTAGE - 3…32 Vdc, 20…275 Vac (24-190 Vdc) BLOCKING VOLTAGE - Up ...
Switching current: 30 A
... >
Relay types
- Clapper-type relays
- Diaphragm relays
Key applications
- RF and communication systems
- Antenna coupling and tuning
- Transmitter
... completely inert environment for switching contacts, ensuring no oxidation or degradation over time. These characteristics make vacuum relays highly efficient, durable, and reliable for high-performance switching ...
Switching current: 25 A
... Features •3-32 VDC Input •600 volt blocking voltage •4000 volt isolation •Zero voltage turn-on •Built-in snubber •100% tested at rated current •High surge capability •U.L. recognized •C.S.A. certified ...
Switching current: 25 A - 125 A
... Zero-Crossing solid state relays are devices that activate when voltage in the output circuit passes near 0 and deactivate when the current is 0. They are particularly useful in applications with resistive load. For temperature dissipation ...
Pixsys
Switching current: 3 A - 9 A
... Solid state single relay with high current capacity for DC electric valves and inductive loads up to 3A e 32V max. ...
Output voltage: 250 V
Output current: 5 A
... Intelligent switching relay to be connected to sensors. The OMT 1550 can be combined with detectors, controllers or system elements to control the sensors used. input: 5x relay / NPN 30V output: ...
Switching current: 25, 50 A
... phase relay with anti-parallel thyristor output is the most widely used industrial Solid State Relay (SSR) due to its multiple application possibilities. The relay can be used for resistive, inductive ...
Switching current: 25 A
Output voltage: 3 V - 280 V
... heat - sufficient cooling must be ensured for switching power above 5 A (heat sink) Housing dimensions - 57 x 45 x 30 mm (H x W x D) Note - Solid state relay pass residual current even in the open switching ...
... 95%), a simple switching on of the protective relays solves the problem, because the event, which is responsible of the opening, is disappeared in the meantime. The reclosing device provides to automatically switch ...
Switching current: 12 A
... BonRelay for switching high amperages and performances for our control units for small sewage treatment plants The relay was developed to connect electrical devices with high electrical power consumption with the ...
... contacts (Dry contacts); - Withstand voltage of the passive contacts —— ≥24VDC; - Output data —— Values of 2 channels of switching signal input. (“1” means “on”, “0” means “off”.); - Output interface ——RS-485 bus. 1200m, ±15KV ESD ...
the best suppliers