|
|
Crawler excavator
Perfect integration of Power and Intelligence
When exceptional power is matched with the controllability to efficiently manage that power, an excavetor can achieve the ultimate in performance. The highly advances and electronically controlled engine generates outstanding power and the e-EPOS system ensures an efficient balance between power and economy.
|
|
|
Combining engineering excellence with a dedication to quality, we make tough machines with long life that meet the challenges of mining.
|
|
Expert at work sites
Our products are proud of being the Mecca of excavators, from the mini to the mid-sized.
The ROBEX series of hyundai excavator, which improved the field of excavation work with multiple use and sophisticated design, will give you the bigger satisfaction through strong excavation capacity and outstanding efficiency.
|
|
|
|
|
|
Crawler Excavators : PC350LC/NLC-8
A unique machine with unrivalled benefits
The PC350-8 is a rugged, productive, all-European machine. Designed and expressly built for European markets, it delivers outstanding productivity, reliability and operator comforts in a robust, environmentally friendly package. Komatsu's exclusive, on-board, HydrauMind system assists in all operations, providing enhanced machine performance that's always perfectly matched to the task.
Effective fuel management
Improved fuel consumption: Through total Komatsu development and control of the engine, hydraulic and electrical systems.
Revolutionary machine management
KOMTRAX(TM): Track and monitor your machine anytime, anywhere for total peace of mind.
Total operator comfort
Low-noise cab: Operator ear noise is as low as an average passenger car.
Large TFT monitor: Improved operator interface through Komatsu-developed information technology. (TFT: Thin Film Transistor)
Complete safety
New, safe SpaceCab(TM): Tubular design developed specifically for hydraulic excavators to protect the operator in the event of a roll over accident.
ECOT3
The Komatsu SAA6D114E-3 engine meets EU Stage IIIA and EPA Tier III emission regulations. 29% NOx reduction.
Greater lifting capacity
Lateral stability and lifting capacity have been improved by the increased machine weight (+ 1.300 kg).
|
|
E215LCMultifonction Equipment
Net flywheel power E215BLC-ME - E215BLC 118 kW - 158 hp
Maximum operating weight E215BLC-ME 24820 kg, E215BLC 23590 kg
Bucket capacity E215BLC-ME 0,45m³, E215BLC 1,31m³
|
|
|
|
|
|
B
"B-Sigma" has Unique "Sigma" boom. It is ideal for jobs in restricted urban sites and densely built-up areas. It is not only Zero Tail swing, but also no overhang on the front swing with the "Sigma boom." This means you are able to turn 360 degrees within the machines width.
1. Sigma Boom - Unique offset boom and far reaching third boom provides extreme versatility.
2. VIPPS (Vi0 Progressive 3-Pump System) - Provides smooth multifunction operation for increased efficiency.
3. VICTAS (Vi0 Crawler Technology for Advanced Stability) - Provides expanded track gauge for greater stability without increasing undercarriage width.
4. "True" Zero Tail Swing - No part of the housing extends beyond the tracks. Allows efficient operation in tight spaces.
5. Bucket Leveling - Yanmar's original mechnical bucket interfernce prevention system helps prevent accidents and increase efficiency.
6. Rear Hood - Large opening rear hood facilitates maintenance.
7. Quick Coupler - Hydraulic quick coupler makes bucket & attachement changing an easy, one person operation.
|
|
|
|
|
|
SV
The "SV" means Ultra-Tight Turning.
The turning radius in both front and rear is very minimal. This smooth, tight turning radius add versatility on a tight work site. We now have 2 models in "SV" series, with the smallest model, SV08 (2348 lbs) and the largest model, SV100 (20,730 lbs).
1. VIPPS (Vi0 Progressive 3-Pump System) - Provides smooth multifunction operation for increased efficiency.
2. VICTAS (Vi0 Crawler Technology for Advanced Stability) - Provides expanded track gauge for greater stability without increasing undercarriage width.
3. "True" Zero Tail Swing - No part of the housing extends beyond the tracks. Allows efficient operation in tight spaces.
4. Easy Attachment Chases - Attachment changes are made easily from the operator's area. The locking pins assure safe operation. Virtually most brands of pin-on attachments can still be used. This eliminates the need to replace existing attachments.
5. Integrated Boom Light - Integrated boom-light is protected from damage.
6. Cabin Light - Cabin light for a bigger range of vision.
7. Overhead Windshield Storage - The ease of overhead windshield storage helps reduce windshield damage.
|
|
|
|
|
|
ViO75-A
VIO
The "VIO" name means True Zero Tail Swing.
In 1993, YNAMAR launched the world's first ZERO TAIL Swing excavator and is currently marketing the 4th generation model. The "VIO" development objective of turning within the machine width has been successfully achieved, while still maintaining the stability and work performance of a conventional style unit.
We have 7 models in the "VIO" ranging from 3704 lbs through 17,530 lbs.
1. VIPPS (Vi0 Progressive 3-Pump System) - Provides smooth multifunction operation for increased efficiency.
2. VICTAS (Vi0 Crawler Technology for Advanced Stability) - Provides expanded track gauge for greater stability without increasing undercarriage width.
3. "True" Zero Tail Swing - No part of the housing extends beyond the tracks. Allows efficient operation in tight spaces.
4. Hydraulic Quick Coupler - The first tailor-made hydraulic quick coupler in the industry. The arm is designed with the quick coupler for improved performance.
5. Boom Light - Integrated boom light is protected from damage.
6. Cabin Light - Cabin light for a bigger range of vision.
7. Side Panel - Battery fuel and hydraulic oil can be checked more conveniently.
|
|
|
Hitachi offers 13 construction sized hydraulic excavators, ranging in weight from 15,905 pounds to 166,700 pounds. The Hitachi Zaxis models are the 80, 120, 135US, 160LC, 200LC, 225USLC, 230LC, 270LC, 330LC, 370, 450LC, 600LC, and 800.
|
|
The PC130-7 is a rugged, productive, all-European machine.
Designed and expressly built for European markets, it delivers productivity, reliability and operator comforts in a robust, environmentally-friendly package. Komatsu’s exclusive, on-board, HydrauMind system assists in all operations, providing enhanced machine performance that’s always perfectly matched to the task.
|
|
The first machine in this range (ViO75) is a true zero-tail-swing machine. YANMAR, the inventor of this concept (Zero Tail Swing), offers a new generation in the very popular "ViO" range. The operator improves productivity, because he can concentrate on his work without worrying about what the rear of the machine is doing.
The B7 Sigma, a super swing machine, is an alternative to the 8-ton. midi-excavator ViO75, thanks to an articulated boom, that allows complete swing of the upper frame and the equipment within the crawlers' width. The new 10-ton. midi-excavator SV100 (rear overhang reduced to 17 cm) completes the range.
|
|
|
The Sunward excavating machinery products are widely used in projects like small earth & stone construction, municipal construction, road maintenance, layout of cables and pipes, garden cultivation, trenches clearance, and etc. Our products perform well in a series of large engineering programs, e.g. Yangzi-Basf Project in Nanjing, Olympic Sports City, West-to-East Natural Gas Transmission Project in Shaanxi, Xuefeng Steel Factory in Wuxi, Nissin Electric Factory, Meicun YKK Technology Co., Ltd. Project, and etc.
|
|
YC75SR Excavator
weight：8200
rated power：51.4KW/2200rpm
standard bucket capacity：0.28m3
standard bucket wide：547mm
|
|
YC85-8 Excavator
weight：8100kg
rated power：60kW/2200rpm
standard bucket capacity：0.32m3
standard bucket wide：858mm
|
|
YC135-8 Excavator
weight：13300kg
rated power：111.5hp
standard bucket capacity：0.52m3
standard bucket wide：1034mm
|
|
444, the big bruiser in a compact package
* Short tail swing – increased efficiency and cycle-time
* Oversized undercarriage for more stability
* Diversity of working equipment – monobloc boom or two-piece articulated boom
* Boom offset – versatility – reach – visibility
The 444 is a midi excavator in the 7,5-12,5 T class segment.
This 12,5 T midi excavator combines features characteristic of mini excavators, such as rubber tracks, boom offset and compact design, with features of large excavators to provide unmatched flexibility and performance.
Thanks to its compact design, this machine is ideal for working in close quarters.
The 444 is available with monobloc or articulated boom. The latter enables the machine to operate in an even more compact way than the monobloc version.
State-of-the-art joystick controls, load sensing and superior breakout forces allow the 444 to handle a variety of applications from trenching to landscaping and site preparation.
|
|
Midi Excavators : PC110R-1
Compact design puts power and precision where you need it.
Komatsu S4D106E-1FB engine develops 70,9 kW (95 HP) for smooth, efficient operation with low noise and emissions.
Load-sensing hydraulic system provides unbeatable control and productivity.
Ground-level maintenance access.
Spacious operator's cab has excellent visibility and ergonomic features to reduce fatigue.
|
|
E70SR
Net flywheel power 41 kW - 55 hp
Operating weight 8.050 kg
Bucket capacity 0.23 - 0.35 m³
E80MSR
Net flywheel power 41 kW - 55 hp
Operating weight 8.340 kg
Bucket capacity 0.23 - 0.35 m³
|
|
|
By combining efficiency and precision in tight work areas, the KX-Series compact excavators have broken new ground for rental, construction, and utility applications. You can depend on them for high output, strong torque, and smooth, powerful operation.
|
|
|
The 712MC was specifically designed for urban and interurban construction sites. The unique drive system of mecalac machines guarantees optimum stability on the 712MC
|
|
|
WB4/40 had manufactured 18 sets. In the meantime may also used as a crane. On the base of WB4/40 model-change designed same sort products are: WB4/40A Dragline and WB2.2/55 Elongated Arm Dragline, herein: 2.2m3, arm length 55mm.
|
|
|
WK-10B is the third generation modified WK-10 machine type, and also the present 10m3 excavator dominant product, had won the National Best Quality Product Gold Prize and Science & Technology Advance Prize. This kind of excavator bucket volume are 10m3, 12m3, 14m3, flat type 10m3, flat type 12m3 5 kinds of bucket for user selection, suitable for ten million tons class large opencast extract of construction material, hydro-power, petroleum-chemistry etc. earthwork engineering, suitable in combination with 100-154 t trucks, and also a lowest environment work temperature of -45°.
|
|
WK-12 Mine-use Excavator, is the newest generation and optimization product, adopting more updating technology and technics based on Wk-10 excavator, it is the most preferred to mining for heavy-duty, it possesses high security, high efficiency with heavy loading and high output etc.
Sorts of WK-12:
WK-12A---primary, universal essence configuring
WK-12B---betterment, developing the material and configuring according to users' requirement
WK-12C---new generation, adopting the newest frequency coversion technology
|
|
|
WK-35 mining shovel is the latest excavating equipment for open-pit mine developed by TYHI. It combines the successful experience accumulated for years from manufacturing of mining shovels, at the meanwhile absorbs lots of advanced technology for design, processing, manufacturing and control from home and abroad. It can match with mining trucks from 172ton to 326ton and is suitable both for stripping and excavating on open-pit coal mine, iron mine and ferro-metal mine with capacity of over thirty million tons.
|
|
WP-6 is based on WK-10B and proceed the type-change design, mainly is elongate its crane arm length, and in the meantime reduce the bucket volume from 10m3 into 6m3, suitable for railway transportation requirement of opencast mine deep extract loading.
The parameter and work area are in correspondence with the same class foreign product.
|
|
|
WK-55 mining shovel is the latest excavating equipment for open-pit mine developed by TYHI. It combines the successful experience accumulated for years from manufacturing of mining shovels, at the meanwhile absorbs lots of advanced technology for design, processing, manufacturing and control from home and abroad. It can match with mining trucks from 172ton to 326ton and is suitable both for stripping and excavating on open-pit coal mine, iron mine and ferro-metal mine with capacity of over thirty million tons.
|
|
|
WK-27 mining shovel is the latest excavating equipment for open-pit mine developed by TYHI. It combines the successful experience accumulated for years from manufacturing of mining shovels, at the meanwhile absorbs lots of advanced technology for design, processing, manufacturing and control from home and abroad. It can match with mining trucks from 172ton to 326ton and is suitable both for stripping and excavating on open-pit coal mine, iron mine and ferro-metal mine with capacity of over twenty million tons.
|
|
|
WK-8 Mine Use Excavator was provided with the international advanced level. WK-8 is suitable for annual capacity of 5 million tons mines, and also used for large Irrigation Engineering.
|
|
WK-20Mine-use Excavator, is the newest heavy duty mining equipment developed by TYHI. Having successful experience of designing and manufacturing the excavators with 4m³ , 8m³ and 10m³ , and adopting lots of new technology and technics from national and abroad, it is applicable in any large open mine which is with more than 20 million ton mineral resources and iron mine, light metal mine for excavating and strip working.
the parts including 170t-190t Mine-use car.
|
|
|
|
Excavators
