|
|
L Pins are removable locating pins, precision ground for accurately aligning holes. The pin is inset into the handle and silver soldered to create a sturdy assembly. The handle is drilled for attaching a cable.
|
|
Hardened Stainless Steel Pins
Material: Stainless steel
DIN : 1.4034 S (X 40 Cr 13)
AISI: 420 F
This quality remains corrosion-resistant after hardening and super finishing
Ra = 0.05 - 0.10
Hardness:
55 HRC (600 HV) centerless ground, lapped and polished
Diameter tolerances: /- 0.002 mm
Measuring Pins
Standard sizes:
In steps of 0.01 mm from 0.50 to 10.00 mm
Material: Steel
as per DIN : 1.3505 (100 Cr 6)
as per AISI: E 52100
Hardness: 62 - 64 HRC (771 - 840 HV)
Diameter tolerances: +/- 0.002 mm
Finish: Centerless ground; lapped and polished; 2 ends flat
|
|
Beta pins (bichromate galvanized steel & stainless steel AISI 316L)
Double beta pins (bichromate galvanized steel)
Safety beta pins (bichromate galvanized steel)
use in industrial supplies, DIY, entertainment industry, agriculture |
|
Ball type pins
The ball type pins are used for all applications requiring the hand to be quickly removed after insertion or shifting.
The ball type pins are fitted and removed quickly, without tools and using one hand only.
Numerous dimensions are available in metric or American units.
5 types of head are available: T or L shapes, knob, protected knob or ring.
|
|
Button Handle (Metric)
Kwik-LokTM Pins are manufactured in a wide range of sizes to meet any application. We offer short lead times for special sizes. Available in 5 handle styles, inch or metric, and in carbon steel and stainless steel. Button Handle configuration is ideal for applications that have limited space.
Handle is black anodized, machined aluminum.
Button is blue anodized aluminum.
Material: Carbon Steel or Stainless Steel
Handle Finish: Black anodized
Includes a ring for easy attachment of option lanyard. |
|
| Products listed here have been derived from Emmotts' standard spring manufacturing operations but are not so easily categorised. These include: disc springs, plain washers, tab washers, volute and secateur springs, balloon springs and wire shapes. |
|
Smalley now offers Circlips. Smalley has four series of Circlips available from stock in ½” to 11” diameters, in both carbon and stainless steel.
With recently expanded production capabilities, Smalley can now also manufacture Eaton® / Tinnerman® style Snap Rings. |
|
A Complete Range for all application problems
-Imperial & Metric ranges
-Radial & Axial assembly
-Materials to suit all environments
-Customised Designs
|
|
Specifying SPIROL Standard Solid Pins and Drive Studs provides the lowest cost and the most responsive delivery. Standards include SPIROL Knurled Pins, Drive Studs, Helical Grooved Pins, Twist-Lok Pins, and Latch Pins. Standard materials have been selected to meet the requirements of ASME and ISO product standards and to cover a range of requirements as dictated by the market.
SPIROL offers variations of our standard solid pins and drive studs that have been tested and proven in a variety of applications. They are generally not available from stock and are made to customer order. |
|
A SLOTTED SPRING PIN is a headless hollow cylindrical tube having a longitudinal slot down the entire length with chamfered or round ends to aid installation. This type of pin is produced to a controlled outside diameter slightly greater than the hole in which it will be installed. Compressed as it is installed, the pin applies continuous pressure towards the sides of the hole wall. The pressure provides tension in a radial manner to prevent loosening created by vibration or shock.
|
|
Heavy Duty Button Handle (Metric)
Kwik-LokTM Pins are manufactured in a wide range of sizes to meet any application. We offer short lead times for special sizes or features. Available in various handle styles, inch or metric sizes, and in carbon steel and stainless steel. Button Handle configuration provides a firm, even grip for smooth comfortable operation.
Heavy Duty solid handle provides additional impact resistance.
Material: Stainless Steel provides additional corrosion resistance
Handle Finish: Stainless Steel
Meets or exceeds NASM 23460 specifications
Includes a ring for easy attachment of option lanyard.
2D, 3D, 3D solid model drawings available for download. |
|
Ring Handle (Metric)
Kwik-LokTM Pins are manufactured in a wide range of sizes to meet any application. We offer short lead times for special sizes. Available in 5 handle styles, inch or metric, and in carbon steel and stainless steel. The Ring Handle configuration is designed for applications which require a small clearance area around the pin.
Handle is machined aluminum.
Button is blue anodized aluminum.
Material: Carbon Steel or Stainless Steel
Includes ring for easy attachment of option lanyard.
2D, 3D, and 3D solid model drawings available for download. (1 inch grip length) |
|
Double Acting T-Handle (Metric)
Double Acting Pins are activated by push or pull motion
All stainless steel construction provides additional corrosion resistance
Ideal for quick insertion and removal
Four ball options available upon request
Meets or exceeds NASM 23460 specifications
Meets or exceeds design specifications MS17988, MS17989, MS 17990
Drive Out feature available upon request |
|
Linchpins for pipes (bichromate galvanized steel)
Linchpins (galvanized & stainless steel AISI 316L)
Safety linchpins (bichromate galvanized steel)
use in industrial supplies, DIY, entertainment industry, agriculture |
|
Precision alignment pin with a ground shank. This popular single-acting type is positive locking until released by pushing the button, which moves the centre supplier of spindle forward to allow the locking professional balls to retract into a radial groove. This type has the widest range of types and sizes. Available in steel or stainless steel.
|
|
This product family covers the following article groups:
- EH 2235. Lifting Pins (Steel / Stainless Steel 1.4305)
- EH 2235. Locating Bushes for lifting pins
Ball Lock Pins
- EH 2237. / 2238. simple finish (Stainless Steel 1.4305 / 1.4542)
- EH 2237. / 2238. with elastic grip (Stainless Steel 1.4305 / 1.4542)
- EH 2237. / 2238. with plastic grip (Stainless Steel 1.4305 / 1.4542)
- EH 2236. Clamping Pins (Stainless Steel 1.4305)
- EH 2240. Socket Pins (Stainless Steel 1.4305)
- EH 2240. Retaining Cables
- EH 2240. Locating Bushes for ball lock pins (Stainless Steel 1.4305)
The Ball Lock Pins by Halder for Connecting, Attaching, Positioning, Fixing, Holding, Securing, Lifting, Bolting, Interlocking, Adjusting …
With a wide product range and many years' experience in manufacturing including made to order, Halder offers the right solution for many applications in virtually every sector of industry:
- Mechanical engineering, tool-making and automotive
- Prefabrication and tank construction
- Fixtures and workshop professional fittings
- Industrial handling
- Hoists manufacturers, platforms, racks and industrial scaffolding
- Sport and rehab devices and equipment
- Medial applications
- Aviation…
In addition to the metric version we have also the product line “Flight-Pins”. This Ball Lock Pins in inch dimensions are according to aviation standard NASM (MS 17984 – MS 17990)
single acting
- EH 4210. with Button Handle (MS17984)
- EH 4211. with T-Handle (MS17985)
- EH 4212. with L-Handle (MS17986)
- EH 4213. with Ring (MS17987)
double acting
- EH 4214. with T-Handle (MS17988)
- EH 4215. with L-Handle (MS17989)
- EH 4216. with Ring (MS17990) |
|
Jergens offers a wide range standard pins made to order in various sizes and configurations.
Jergens is also capable of making special pins in large and small quantities to meet your unique design requirements.
A wide range of Mil-Spec pins are available from MS 17984 - MS 17990, MIL-P-45952/1
|
|
Kwik-LokTM Pins are manufactured in a wide range of sizes to meet any application. We offer short lead times for special sizes. Available in 5 handle styles, inch or metric, and in carbon steel and stainless steel. Button Handle configuration is ideal for applications that have limited space.
Handle is black anodized, machined aluminum.
Button is blue anodized aluminum.
Material: Carbon Steel or Stainless Steel
Handle Finish: Black anodized
Includes a ring for easy attachment of option lanyard.
2D, 3D, and 3D solid model drawings available for download. Click here to select and download solid models/drawings
Note: For best results downloading files, professional press your right mouse button and select 'Save Target As' or 'Save Link As' |
|
Quick release pins - Metric
WDS250
Black cast aluminium T-handle
Blue anodised aluminium buttonStainless Steel Body
(SAE AMS 5643)
Includes hole and professional ring for easy attachment of optional professional chain or lanyard.
Other styles available
Carbon steel available
Quick Release Professional pins - Imperial
WDS250
Black cast aluminium T-handle
Blue anodised aluminium button Stainless Steel Body
(SAE AM5 5643)
Includes hole and ring for easy attachment of optional chain or lanyard.
Other styles available
Carbon steel available
|
|
Recessed Button Handle (Metric)
Kwik-LokTM Pins are manufactured in a wide range of sizes to meet any application.We offer short lead times for special sizes. Available in 5 handle styles, inch or metric, and in stainless steel.
The Recessed Button Handle design helps prevent accidental actuation of the button.
Handle is stainless steel.
Button is stainless steel.
Material: Stainless Steel
Includes ring for easy attachment of option lanyard. |
|
Professional retainers made of spring band steel avoid the axial triggering on suppliers of bolts and shafts.
mbo Osswald offers actually in its delivery programme different variations of retaining elements for bolts and shafts, such as:
a) for bolts and shafts with groove
- SL-retainers, compensating for play
- KL-retainers, compensating for play
- Bayonet clips and
- Locking washers according to DIN 6799
These parts are easily removable and can be reused.
b) for bolts and shafts without groove
- Duo clips, removable
- Spring cleaners without or with cap, not removable
|
|
~ All shackles meet or exceed Federal Specification RRC-271D
~ Working Load Limit and Traceability codes shown as permanent marking on body and pin
~ Available in painted, galvanized and self-colored finishes (Dacromate coating upon special request only)
~ All shackles have alloy quenched and tempered pins
~ Shackles made from technically advanced microalloy material
~ Load break tests consistently show microalloy outperforms quenched and tempered carbon material |
|
~ Excellent for special applications where standard shackle cannot provide adequate reach
~ Available self colored and painted orange
~ Screw pin style
~ M7152 -3/4" size, 4.56" reach, 10,000 lbs. working load limit
~ M7154 - 1" size, 5.50" reach, 19,000 lbs. working load limit
~ M7157- 1-1/2" SIZE, 7.00" reach, 34,000 lbs. working load limit |
|
screw pin anchor shackle.
screw pin chain shackle
Round pin Chain shackle
Round pin anchor shackle
bolt type chain shackle
bolt type anchor shackle
commercial type steel shackle
BS large bow shackle
BS large Dee shackle
Safety Type Grade S Bow Shackle
Commercial Carbon steel shackle DEE & BOW Shackle
forge shackle, alloy pin, whold forged, heat treated.
Shackles are used in a variety of lifting, pulling, and tie down applications. |
|
Smalley now offers Snap rings. Smalley has four series of snap rings available from stock in ½” to 11” diameters, in both carbon and stainless steel.
With recently expanded production capabilities, Smalley can now also manufacture Eaton® / Tinnerman® style Snap Rings. |
|
An Unbeatable Range Off The Shelf
-No Protruding Ears
-Wide choice of imperial and metric standard sizes from ½”/13mm to 11”/300mm
-Available in Stainless Steel
-Specials economically Produced Without Tooling Charges
-Easy to Use
|
|
Spirolox® spiral retaining rings, manufactured exclusively by Smalley, have No Ears To InterfereTM with the mating components in an assembly. Spirals can be interchanged with standard snap ring grooves and offer a 360° retaining surface. Spiral Retaining Rings can be easily assembled and removed without special tools.
Smalley offers 15 different series of Spirolox® spiral retaining rings with over 5,000 rings in stock to select from. Spirals are stocked in both carbon and stainless steel, diameters range from ¼” to 16” (9 mm to 400 mm). Specials can be produced from .200” to 84” (5 mm to 2000 mm). |
|
Spirals are manufactured by coiling the ring from flat wire. This unique process produces a retaining ring that has no protruding lugs or burrs that would interfere in your assembly. The Smalley Ring can be economically produced in carbon steel, stainless steel, coppers, and many other alloys.
TFC offers over 5000 standard spiral rings, which are readily available in both carbon and stainless steel. If you require special designs, take advantage of TFC’s engineers and no-tooling manufacture; a process perfect for large runs, prototypes and midstream design changes. Whatever your application, TFC/Smalley have the cost-effective and innovative design solution. |
|
| ... products without technical information |
| |
|
|