|
|
| The gearing transmissions are pre-arranged for the fitting of the electric motor in a vertical position. Developed and designed according to the state-of-the-art technology, they meet all requirements on power transmission of battery-driven industrial trucks. This type of transmissions need low maintenance and servicing since the assembly and disassembly of the parts (i.e. electric motor) happens without having to remove any transmission parts and accessories. Oil bath lubrication. |
|
The wheel diameter has significant influence on the performance of a castor.
Wheel-ø 58 mm up to ø 200 mm |
|
Series 74: Vulkollan transpallet rollers, hardness 93 +/-2 Shore A, excellent rolling resistance and elasticity, good resistance to wear and to tearing; weldless steel centre.
Series 75: TR polyurethane transpallet rollers, harndess 95 +/-3 Shore A, excellent rolling resistance and elasticity, good resistance to wear and to tearing; weldless steel centre.
Series 76: Solid polyamide 6 transpallet rollers; excellent rolling resistance, abrasion and impact resistance.
Series 77: TR polyurethane transpallet rollers, hardness 95 +/-3 Shore A, excellent rolling resistance and elasticity, good resistance to wear and to tearing; polyamide 6 centre.
Series 78: Injection TPU 60D polyurethane rollers, hardness 60 +/-3 Shore D, excellent rolling resistance and elasticity, good resistance to wear and to tearing; polyamide 6 centre. |
|
Polyamide 6 solid wheels. Standard duty (NL), stainless steel standard duty (NLX), medium-heavy duty (P), stainless steel medium-heavy duty (PX), electro-welded (EE) castors and castors for mobile scaffoldings.
Diameter: 65-250 mm, carrying capacity: 120-1200 daN |
|
Series 62: TR-ROLL polyurethane wheels, hardness 75 Shore A, excellent sliding and elasticity, good resistance to wear and tear; core made of cast aluminium. Standard duty (NL), medium-heavy duty (P) and electro-welded (EE) brackets.
Series 64: TR polyurethane wheels, hardness 95 +/-3 Shore A, excellent rolling resistance and elasticity, highly resistance to wear and to tearing; cast iron centre. Standard-duty (NL), medium-heavy duty (P), extra-heavy duty (EP) and electro-welded (EE-EEG) castors. Diameter: 80-400 mm, Carrying capacity: 300-3500 daN
Series 65: TR polyurethane wheels, hardness 95 +/-3 Shore A, excellent rolling resistance and elasticity, highly resistance to wear and to tearing; aluminium and cast iron centre. Standard-duty (NL), medium-heavy duty (P), extra-heavy duty (EP) and electro-welded (EEG) castors. Diameter: 80-300 mm, Carrying capacity: 220-2200 daN
Series 66: TR polyurethane wheels, hardness 95 +/-3 Shore A, excellent rolling resistance and elasticity, highly resistance to wear and to tearing; polyamide 6. Standard-duty (NL), medium-heavy duty (P), extra-heavy duty (EP) and electro-welded (EEG) castors. Diameter: 80-250 mm, Carrying capacity: 150-1000 daN |
|
Series 22: Non-marking grey rubber wheels, hardness 80 Shore A, polypropylene centre. Standard duty (NL) and stainless steel standard duty (NLX) castors. Diameter: 80-200 mm, Carrying capacity: 65-225 daN
Series 23: Non-marking grey rubber wheels, hardness 80 Shore A, centre made of two riveted galvanized pressed steel discs. Standard duty castors (NL). Diameter: 80-200 mm, Carrying capacity: 65-230 daN
Series 52: Standard rubber wheels, hardness 83 Shore A, polypropylene centre. Standard duty castors (NL). Diameter: 80-250 mm, Carrying capacity: 65-300 daN
Series 53: Standard rubber wheels, hardness 83 Shore A, centre made of two riveted galvanized pressed steel discs. Standard duty castors (NL). Diameter: 80-280 mm, Carrying capacity: 65-390 daN
Series 71: Grey non-marking thermoplastic rubber wheels, hardness +85 /- 4 Shore A, polypropylene centre. Standard duty castors (NL) and stainless steel standard duty (NLX) brakets. Diameter: 80-200 mm, Carrying capacity: 70-225 daN |
|
| SOLIDEAL Designers and Manufacturers of the worlds finest, most complete range of heavy-duty Industrial Pneumatic Tyres |
|
| Industrial swivel casters are specifically made for applications where a low overall height and a high load capacity are desired. All of our casters feature dual wheels and a tempered stainless steel construction that exhibits excellent strength, light weight, corrosion resistance, and passive shock absorption. |
|
Diameter: 80 to 250 mm
Charge Capacity : 75 - 400 kgs
Assemblies :
Fixed
Swivel
Bolt Hole
Swivel with Brake
Bolt hole with brake
Wheels :
PGA- Grey Rubber Tyred and Polypropylene Centred Wheel
PS- Rubber Tyred and Polypropylene Centred Wheel
PO-Polyurethane Tyred and Nylon Centred Wheel
POL- Polyurethane Tyred and Polyprolylene Centred Wheel
FT- Reinforced Nylon Wheel
UT-Polypropylene Wheel
TD- Phenolic Resin Wheel
TT- Phenolic Resin Wheel
PGI- Grey Rubber Tyred and Polypropylene Centred Wheel
PPI- Red Polyurethane Tyred and Polypropylene Centred Wheel |
|
| Pneumatic tyred wheels with rib or country profile and 2 plies; working pressure: 2 bars; polypropylene centre. Standard duty castors (NL). Diameter: 260 mm; carrying capacity: 150 daN |
|
The wheel diameter has significant influence on the performance of a castor.
Wheel-ø 30 mm up to ø 645 mm |
|
Japanese manufacturer, Sugatsune, has a wide range of casters for industrial or furniture use.
Please visit our web site or view the PDF catalog files here.
sugatsune.co.jp (Sugatsune Japan)
sugatsune.com (Sugatsune America)
sugatsune.net (Sugatsune America-Industrial) |
|
| From simple plastic castors for furniture to self levelling, locking and stainless steel options WDS have a wide range of castors. Our range of wheels encompass solid rubber and polyurethane options plus a plain cast iron option to accept your own tyre. Both these options are complimented by a range of light, medium and heavy duty Ball Transfer Units. All these options are available in our Machine Accessories Catalogue call + 44 (0)113 290 9852 for your copy or visit our website. |
|
The main feature of these castors is the possibility to transform them from swivel castors into fixed castors, by engaging the brake and as such eliminating the offset. This not only increases the stability of the trolley, but also increases the stationary load capacity by approximately 30% with respect to the offset model. These castors are available in the following models:
- with top plate fitting systeme
- with unthreaded stem fitting systeme
- with threaded stem fitting systeme, which allows the mobile scaffoldin to be positioned horizontally, even in unlevel conditions.
Complies with EN 1004:2005
Available with double pedal. |
|
Diameter: 160 to 200 mm
Charge Capacity : 215 - 700 kgs
Wheel + Assembly Brake
Wheels:
TN-Reinforced Nylon Wheel
HU- Polyurethane Tyred and Cast Iron Centred Wheel
HG- Rubber Tyred and Cast Iron Centred Wheel
PS- Rubber Tyred and Polypropylene Centred Wheel
BS- Rubber Tyred and Metallic Centred Wheel |
|
The wheel diameter has significant influence on the performance of a castor.
Wheel-ø 58 mm up to ø 200 mm |
|
|
|