|
|
Series: POEV 120 - 650 kg
Series: LE-POEV, B-POEV 120 - 300 kg
Series: L-POEV, B-POEV, BH-POEV 120 - 550 kg
Series: LK-POEV, BK-POEV, BH-POEV 170 - 450 kg
Series: LH-POEV, BH-POEV 170 - 550 kg
Series: ALEV 180 - 550 kg
Series: L-ALEV, B-ALEV, BH-ALEV 180 - 550 kg
Series: LK-ALEV, BK-ALEV, BH-ALEV 180 - 450 kg
Series: LKR-ALEV 180 - 250 kg
Series: LH-ALEV, BH-ALEV 180 - 550 kg
Series: LO-ALEV, BO-ALEV 270 - 550 kg
Series: LOD-ALEV, BOD-ALEV 360 - 500 kg
Series: SE 180 - 1150 kg
Series: LK-SE, BK-SE, BH-SE 180 - 500 kg
Series: LH-SE, BH-SE 180 - 700 kg
Series: LO-SE, BO-SE 280 - 900 kg
Series: LS-SE, BS-SE 280 - 1150 kg
Series: LSD-SE, BSD-SE 800 - 1800 kg
Series: GEV, SEV 725 - 3000 kg
Series: LS-GEV, LS-SEV, BS-GEV, BS-SEV 900 - 3000 kg
Series: GEVN, SEVN 750 - 3000 kg
Series: DS 1500 - 6000 kg
Series: SAV 525 - 3000 kg
|
|
Series 60: Injection TPU 60D polyurethane wheels, hardness 55 Shore D, excellent rolling resistance and elasticity, good resistance to wear and to tearing; polyamide 6 centre. Standard duty (NL), stainless steel standard duty (NLX), medium-heavy duty (P), stainless steel medium-heavy duty (PX) castors and castors for mobile scaffoldings. Diameter: 80-200 mm, carrying capacity: 120-450 daN
Series 61: Injection TPU 80A polyurethane wheels, hardness 80 Shore A, excellent rolling resistance and elasticity, good resistance to wear and to tearing; polyamide 6 centre. Standard-duty (NL) and stainless steel standard duty (NLX) castors. Diameter: 80-200 mm, carrying capacity: 75-300 daN
|
|
- Series: PTH 125 - 500 kg Wheels with polyurethane tread, nylon wheel centre
- Series: LE-PTH, B-PTH 125 - 300 kg Pressed steel swivel and fixed castors
- Series: LER-PTH 125 - 300 kg Pressed steel swivel castors with bolt hole
- Series: L-PTH, B-PTH 125 - 400 kg Pressed steel swivel and fixed castors, medium duty brackets
- Series: POTH 150 - 700 kg Wheels with polyurethane tread, heavy nylon wheel centre
- Series: L-POTH, B-POTH 200 - 400 kg Pressed steel swivel and fixed castors, medium duty brackets
- Series: LK-POTH, BK-POTH, BH-POTH 150 - 600 kg Pressed steel swivel and fixed castors, medium heavy duty brackets
- Series: LKR-POTH 150 - 250 kg Pressed steel swivel castors with bolt hole fitting, medium heavy duty brackets
- Series: LH-POTH, BH-POTH 150 - 700 kg Pressed steel swivel and fixed castors, heavy duty brackets
|
|
|
Leveling casters combine a dual wheel caster and a precision leveling component (sold separately) to create a practical and cost-effective integrated solution. These high quality stainless products are designed for heavy capital equipment applications in the semiconductor, pharmaceutical, and medical industries where both mobility and leveling are required.
|
|
The caster of immobilization is the combination of a swivelling caster and an adjustable shoe of immobilization.
It supports and makes it possible to easily move heavy machines, apparatuses and to position them in a stable way.
The installation is done while descending the shoe from immobilization using a nut or a pawl.
The wheel does not rest any more on the ground and the apparatus can be levelled on the shoes in spite of the irregularities of the ground.
Body of cast aluminum cover moulded, protected by painting ivory hammered.
System of swivelling ensured by 2 crowns of balls.
Fixing by galvanized steel turntable square, delivered with bolts or platinum to tapped central hole, delivered with threaded rod and nut.
Temperature of use: -10°C with +90°C.
|
|
|
Castors are available in a range of sizes, in the form of Swivel Castors, Swivel Castors with double brake (brake for wheel axis and swivelling axis) and F
|
|
|
|
|
|
Series: TPA 50 - 140 kg
Series: LRA-TPA, BRA-TPA 50 - 75 kg
Series: LPA-TPA, BPA-TPA 50 - 75 kg
Series: LMDA-TPA 80 - 100 kg
Series: LDA-TPA 80 - 100 kg
Series: LKRA-TPA, BKRA-TPA, wheel Ø 80 - 100 mm 90 - 100 kg
Series: LKRA-TPA, BKRA-TPA, wheel Ø 125 - 150 mm 110 - 110 kg
Series: LKPA-TPA, BKPA-TPA 90 - 110 kg
Series: VPA 40 - 125 kg
Series: LRA-VPA, BRA-VPA 40 - 70 kg
Series: LPA-VPA, BPA-VPA 40 - 70 kg
Series: LMDA-VPA 70 - 100 kg
Series: LDA-VPA 70 - 100 kg
Series: LKRA-VPA, BKRA-VPA, wheel Ø 80 - 100 mm 60 - 90 kg
Series: LKRA-VPA, BKRA-VPA, wheel Ø 125 - 150 mm 80 - 110 kg
Series: LKPA-VPA, BKPA-VPA 60 - 110 kg
Series: VMA 75 - 125 kg
Series: LKRA-VMA, BKRA-VMA 75 - 120 kg
Series: PTH 125 - 180 kg
Series: LKRA-PTH, BKRA-PTH 120 - 120 kg
Series: LKPA-PTH, BKPA-PTH 120 - 120 kg
Series: LRA-VSTH 100 - 100 kg
Series: LPA-VSTH 100 - 100 kg
Series: POA 75 - 180 kg
Series: LRA-POA 75 - 75 kg
Series: LPA-POA, BPA-POA 75 - 75 kg
Series: LMDA-POA 80 - 100 kg
Series: LDA-POA 80 - 100 kg
Series: LKRA-POA 110 - 120 kg
Series: LKPA-POA, BKPA-POA 110 - 120 kg
Series: HZ 40 - 90 kg
Series: LRA-HZ 40 - 60 kg
Series: LPA-HZ, BPA-HZ 40 - 60 kg
Series: LKPA-HZ, BKPA-HZ 70 - 90 kg
|
|
UHG LOW PROFILE HEAVY DUTY WHEEL AND CASTER
(Wheel Diameter 50, 65, 75, 80, or 100 mm)
*Low Profile and Heavy Duty up to 816kg (1795 lbs) per caster.
Ideal for Manufacturing Equipment.
*Sealed ball bearing swivel assembly provides smooth and long-term service.
*Hexavalent chromium free. Using trivalent chromium for RoHS compliance.
*Choose wheel type from Phenolic, Reinforced Nylon, MC Nylon, or Electro-conductive MC Nylon.
*All wheels equipped with heavy duty ball bearing.
Please visit our website or PDF catalogue #152 for further information on this or other similar products.
|
|
APPLICATION :
traction for cleaning machines, material handling, pushers, etc..
FEATURES :
Type of motor mounted: permanent magnet – shunt wound
Gearbox: planetary gearbox with steel gears
Reduction ratio: 18/1
Brake solutions: band brake, electromagnetic brake
|
|
APPLICATION :
traction for cleaning machines, material handling, pushers, etc..
FEATURES :
Type of motor mounted: permanent magnet – shunt wound
Gearbox: planetary gearbox with steel gears
Reduction ratio: 18/1
Brake solutions: band brake, electromagnetic brake
|
|
|
The gearing transmissions are pre-arranged for the fitting of the electric motor in a vertical position. Developed and designed according to the state-of-the-art technology, they meet all requirements on power transmission of battery-driven industrial trucks. This type of transmissions need low maintenance and servicing since the assembly and disassembly of the parts (i.e. electric motor) happens without having to remove any transmission parts and accessories. Oil bath lubrication.
|
|
Ventless wound field motor, Advanced DCseries wound or SEPEX.
2 hp 24 or 36VDC TENV
Ventless permanent magnet motor. 2 hp 24V or 36VDC TENV
Specifically designed as a self contained drive. Simply "bolt on & plug in".
Available with or without a mechanical 6" disk brake, parking and service
duty, or electric parking brake.
Main housing cast in corrosion resistant aluminum.
Designed with a 14"x4.5"x10.5" solid X-grooved tire. Available in
non-marking rubber, wet traction "P7" compound and polyurethane.
Service friendly. Common sense assembly for ease of service.
Designed with quality seals and bearings, as well as hunter tooth gearing.
34:1 total double reduction.
High quality "EP" grease lubrication.
Serial I.D. tagged for easy tracking.
Manufacted in the U.S.
|
|
The wheel diameter has significant influence on the performance of a castor.
Wheel-ø 58 mm up to ø 200 mm
|
|
Series 74: Vulkollan transpallet rollers, hardness 93 +/-2 Shore A, excellent rolling resistance and elasticity, good resistance to wear and to tearing; weldless steel centre.
Series 75: TR polyurethane transpallet rollers, harndess 95 +/-3 Shore A, excellent rolling resistance and elasticity, good resistance to wear and to tearing; weldless steel centre.
Series 76: Solid polyamide 6 transpallet rollers; excellent rolling resistance, abrasion and impact resistance.
Series 77: TR polyurethane transpallet rollers, hardness 95 +/-3 Shore A, excellent rolling resistance and elasticity, good resistance to wear and to tearing; polyamide 6 centre.
Series 78: Injection TPU 60D polyurethane rollers, hardness 60 +/-3 Shore D, excellent rolling resistance and elasticity, good resistance to wear and to tearing; polyamide 6 centre.
|
|
|
|
|
|
Series: HTH, dimensions 60x35 - 82x62 mm
180 - 680 kg
Rollers for pallet truckes with Blickle Extrathane® polyurethane tread, steel wheel centre
Series: HTH, dimensions 82x65 - 85x75 mm
450 - 850 kg
Rollers for pallet truckes with Blickle Extrathane® polyurethane tread, steel wheel centre
Series: HTH, dimensions 85x75 - 90x50 mm
340 - 840 kg
Rollers for pallet truckes with Blickle Extrathane® polyurethane tread, steel wheel centre
Series: ALTH, VSTH, GTH
350 - 1050 kg
Heavy duty wheels with Blickle Extrathane® polyurethane tread, aluminium, steel or cast iron wheel centre
Series: HTHW, dimensions 82x60 - 85x70 mm
440 - 800 kg
Rollers for pallet trucks with Blickle Extrathane® polyurethane tread, steel wheel centre, splash and pressure washing protection
Series: HTHW, dimensions 85x75 - 85x95 mm
570 - 720 kg
Rollers for pallet trucks with Blickle Extrathane® polyurethane tread, steel wheel centre, splash and pressure washing protection
Series: HTHW, dimensions 85x100 - 85x110 mm
760 - 840 kg
Rollers for pallet trucks with Blickle Extrathane® polyurethane tread, steel wheel centre, splash and pressure washing protection
Series: HPO, dimensions 80x61 - 82x79 mm
600 - 800 kg
Nylon rollers for pallet trucks
Series: HPO, dimensions 82x80 - 85x100 mm
650 - 1100 kg
Nylon rollers for pallet trucks
Series: ALEV, ALTH, PO
450 - 800 kg
Steer wheels for pallet trucks
|
|
Plastic wheels
LINE KLG KLR
Wheel : Made of high quality polyamide in light and medium model, with plain or roller bearing . The wheels are temperature resistant from 40°C up to +80°C.
|
|
Polyamide 6 solid wheels. Standard duty (NL), stainless steel standard duty (NLX), medium-heavy duty (P), stainless steel medium-heavy duty (PX), electro-welded (EE) castors and castors for mobile scaffoldings.
Diameter: 65-250 mm, carrying capacity: 120-1200 daN
|
|
|
|
|
|
- Series: PO, wheel Ø 60 - 125 mm 150 - 300 kg Nylon wheels, medium heavy design
- Series: PO, wheel Ø 150 - 300 mm 350 - 1500 kg Nylon wheels, medium heavy design
- Series: LE-PO, B-PO 150 - 300 kg Pressed steel swivel and fixed castors
- Series: LER-PO 150 - 300 kg Pressed steel swivel castors with bolt hole
- Series: LEZ-PO 150 - 270 kg Pressed steel swivel castors with stem fitting
- Series: L-PO, B-PO, wheel Ø 75 - 150 mm 200 - 400 kg Pressed steel swivel and fixed castors, medium duty brackets
- Series: L-PO, B-PO, BH-PO, wheel Ø 160 - 250 mm 400 - 600 kg Pressed steel swivel and fixed castors, medium duty brackets
- Series: LK-PO, BK-PO, BH-PO 200 - 600 kg Pressed steel swivel and fixed castors, medium heavy duty brackets
- Series: LH-PO, BH-PO 200 - 900 kg Pressed steel swivel and fixed castors, heavy duty brackets
- Series: LO-PO, BO-PO 400 - 1100 kg Welded steel heavy duty swivel and fixed castors
- Series: POW 200 - 220 kg Noise-absorbing nylon wheels
- Series: LE-POW, B-POW 150 - 150 kg Pressed steel swivel and fixed castors
- Series: LER-POW 150 - 150 kg Pressed steel swivel castors with bolt hole
- Series: L-POW, B-POW 200 - 200 kg Pressed steel swivel and fixed castors, medium duty brackets
- Series: LK-POW, BK-POW 200 - 220 kg Pressed steel swivel and fixed castors, medium heavy duty brackets
- Series: PP 120 - 500 kg Polypropylene wheels
- Series: LE-PP, B-PP 120 - 300 kg Pressed steel swivel and fixed castors
- Series: LER-PP 120 - 300 kg Pressed steel swivel castors with bolt hole
- Series: L-PP, B-PP 120 - 400 kg Pressed steel swivel and fixed castors, medium duty brackets
|
|
|
|
|
|
Series 62: TR-ROLL polyurethane wheels, hardness 75 Shore A, excellent sliding and elasticity, good resistance to wear and tear; core made of cast aluminium. Standard duty (NL), medium-heavy duty (P) and electro-welded (EE) brackets.
Series 64: TR polyurethane wheels, hardness 95 +/-3 Shore A, excellent rolling resistance and elasticity, highly resistance to wear and to tearing; cast iron centre. Standard-duty (NL), medium-heavy duty (P), extra-heavy duty (EP) and electro-welded (EE-EEG) castors. Diameter: 80-400 mm, Carrying capacity: 300-3500 daN
Series 65: TR polyurethane wheels, hardness 95 +/-3 Shore A, excellent rolling resistance and elasticity, highly resistance to wear and to tearing; aluminium and cast iron centre. Standard-duty (NL), medium-heavy duty (P), extra-heavy duty (EP) and electro-welded (EEG) castors. Diameter: 80-300 mm, Carrying capacity: 220-2200 daN
Series 66: TR polyurethane wheels, hardness 95 +/-3 Shore A, excellent rolling resistance and elasticity, highly resistance to wear and to tearing; polyamide 6. Standard-duty (NL), medium-heavy duty (P), extra-heavy duty (EP) and electro-welded (EEG) castors. Diameter: 80-250 mm, Carrying capacity: 150-1000 daN
|
|
Polyuethqne6zheels
LINE PKG PKR PKK
Wheel : wheel body made of polyamide 6 natural with plain, roller, or ball bearing. Coating made of high quality polyurenthane, non removable attached to wheel. Abrasion resistant, low rolling resistance, quiet.
|
|
Series 22: Non-marking grey rubber wheels, hardness 80 Shore A, polypropylene centre. Standard duty (NL) and stainless steel standard duty (NLX) castors. Diameter: 80-200 mm, Carrying capacity: 65-225 daN
Series 23: Non-marking grey rubber wheels, hardness 80 Shore A, centre made of two riveted galvanized pressed steel discs. Standard duty castors (NL). Diameter: 80-200 mm, Carrying capacity: 65-230 daN
Series 52: Standard rubber wheels, hardness 83 Shore A, polypropylene centre. Standard duty castors (NL). Diameter: 80-250 mm, Carrying capacity: 65-300 daN
Series 53: Standard rubber wheels, hardness 83 Shore A, centre made of two riveted galvanized pressed steel discs. Standard duty castors (NL). Diameter: 80-280 mm, Carrying capacity: 65-390 daN
Series 71: Grey non-marking thermoplastic rubber wheels, hardness +85 /- 4 Shore A, polypropylene centre. Standard duty castors (NL) and stainless steel standard duty (NLX) brakets. Diameter: 80-200 mm, Carrying capacity: 70-225 daN
|
|
- Series: VW 50 - 200 kg Wheels with "Blickle®-Soft" soft rubber tyres, pressed steel rim
- Series: L-VW, B-VW, BH-VW 50 - 200 kg Pressed steel swivel and fixed castors, medium duty brackets
- Series: VWPP 50 - 200 kg Wheels with "Blickle®-Soft" soft rubber tyres, synthetic rim
- Series: L-VWPP, B-VWPP, BH-VWPP 50 - 200 kg Pressed steel swivel and fixed castors, medium duty brackets
- Series: RD 100 - 650 kg Wheels with semi-elastic solid rubber tyres, "Blickle®-Comfort", pressed steel rim
- Series: L-RD, B-RD, BH-RD 100 - 600 kg Pressed steel swivel and fixed castors, medium duty brackets
- Series: LK-RD, BK-RD, BH-RD 100 - 350 kg Pressed steel swivel and fixed castors, medium heavy duty brackets
|
|
Darcor's spring-loaded and shock-attenuating line of casters dampens the damaging effects of shock and vibration, protecting your investment.
Dampening shock and vibration with Darcor casters saves time and money. Darcor Casters, easily move mobile/portable sensitive equipment over bumps, rough surfaces, thresholds and other obstacles, making sure valuable equipment is not damaged by the shock of transport.
Darcor is the leading caster consultant and OEM manufacturer for some of the largest and most respected sensitive equipment companies, providing quality engineering for maximum strength, performance, and durability. We also supply heavy-duty spring-loaded casters to the top lift truck manufacturers.
|
|
Grey cast iron flange wheels
LINE GSPG GSPK
Wheel: made of special grey cast iron, flange and running surface stripped dean. Running surface with 3° gradient, with plain bearing or groove ball bearing. Low rolling resistance, high abrasion resistance. The wheels with plain bearings are temperature resistant up to 600°C
|
|
Applications
Material Handling
Personal / Cargo Transports
Riding Floor Sweeper / Scrubbers
TENV (Wound Field motor or Permanent Magnet)
1 - 2hp
12 - 36VDC
Specifically designed as a self contained drive
Simply "bolt on and plug in"
Available with or without a mechanical 6" caliper/disk brake, or electric
"e-mag" brake
Main housing cast in corrosion resistant aluminum
Tire included is 12"x4"x8" solid X-grooved rubber (options: Rubber,
Non-marking rubber, Wet traction)
Wheel and motor can be changed without affecting other components
(I.E. motor/wheels/seals)
Designed with quality seals and bearings, as well as hunter tooth helical
gearing
36:1 total double reduction
High quality EP grease lubrication
Serial I.D. tagged for easy tracking
Built in the U.S.A.
|
|
Tests were conducted using a platform truck equipped with two swivel and two rigid 6 x 2 casters loaded with a total of 2150 pounds (537 per caster). The effort required to start and maintain the truck in motion was measured. The swivelling test was conducted by aligning the two swivel casters at 90° to the direction of travel.
Each test was conducted three times and the results averaged. Variations of twenty percent were common. The greatest variation was experienced when the forces required were greater than eighty pounds due to the physical effort required. All tests were conducted manually with appropriate force gauges, and roller bearings in the wheel.
The ranking of the various wheels gave the greatest weight to starting and rolling. It was felt that swivelling could be affected by the shape of the tread and would not be as valid an indication of performance.
|
|
|
SOLIDEAL Designers and Manufacturers of the worlds finest, most complete range of heavy-duty Industrial Pneumatic Tyres
|
|
ELTOR
Taking the strain from ground level
The Eltor E5 and E3 Tyre can be supplied with the FIX system. The Fix system allows mounting of the E5 and E3 on special wheels that do not require lateral locking rims.
Special three-compound wheel to give optimun comfort, minimum rolling resistance, simple and rapid mounting on the rim avoiding the necessity for fixing rings.
* The unique bead configuration with special heavy duty dege strip ensures that the tyre is securely locked in the throat of the rim withouty clip ring.
* This result in a better seat in the well of the rim and superior performance with greatly enhanced comfort.
* Using a single fitting ring, the tyre can be rapidally dismounted from the rim without damage to the special bead profile.
* The FIX has been designed to suit LEMMERZ rims or other types of similar configuration and dimensions.
|
|
Solid rubber wheels
LINE VBR
Wheel : Wheel body madle of sheet steel, zinced, with roller bearing, Equipped with standard solid rubber types
|
|
|
|
|
|
- Series: VE 50 - 205 kg Wheels with standard solid rubber tyres, pressed steel rim
- Series: LE-VE, B-VE 50 - 205 kg Pressed steel swivel and fixed castors
- Series: LER-VE 50 - 205 kg Pressed steel swivel castors with bolt hole
- Series: LEZ-VE 50 - 205 kg Pressed steel swivel castors with stem fitting
- Series: V, wheel Ø 80-200 mm 50 - 300 kg Wheels with standard solid rubber tyres, pressed steel rim, reinforced design
- Series: V, wheel Ø 250-400 mm 295 - 800 kg Wheels with standard solid rubber tyres, pressed steel rim
- Series: L-V, B-V, BH-V 50 - 385 kg Pressed steel swivel and fixed castors, medium duty brackets
- Series: VPP, wheel Ø 80 - 180 mm 50 - 170 kg Wheels with standard solid rubber tyres, synthetic rim
- Series: VPP, wheel Ø 200 - 400 mm 205 - 350 kg Wheels with standard solid rubber tyres, synthetic rim
- Series: LE-VPP, B-VPP 50 - 205 kg Pressed steel swivel and fixed castors
- Series: LER-VPP 50 - 205 kg Pressed steel swivel castors with bolt hole
- Series: LEZ-VPP 50 - 205 kg Pressed steel swivel castors with stem fitting
- Series: L-VPP, B-VPP, BH-VPP 50 - 295 kg Pressed steel swivel and fixed castors, medium duty brackets
- Series: VPE 35 - 150 kg Wheels with standard solid rubber tyres, synthetic rim
- Series: TPA, TPP 90 - 200 kg Wheels with thermoplastic rubber tread, synthetic wheel centre
- Series: LE-TPA, LE-TPP, B-TPA, B-TPP 90 - 200 kg Pressed steel swivel and fixed castors
- Series: LER-TPA, LER-TPP 90 - 200 kg Pressed steel swivel castors with bolt hole
|
|
|
|