|
|
ES AXLES
Axles for industrial lift trucks between 1.5 and 5 ton operating capacity
From 215 to [13.0 to 47.5 cu.in/rev.]
Mounting for the mast
Two hydrobases
Large hot oil shuttle
Multidisc industrial brakes
|
|
| The Double Height Shift System is designed to adjust the height of a standard lift-truck mast. This is especially useful if the existing mast does not comply with the requested height or when a certain under-door-clearance is needed. The cylinders are integrated on each side of the forks meaning minimal lost load thickness and maximum visibility. |
|
Built tough for the lift truck industry, Fleet Weigh is a rugged, fully immersible unit, (wash down friendly), with no easily broken plugs or wires.
Installation of Fleet Weigh is straight forward for a lift truck mechanic with basic electrical skills. It is installed without the use of laptops or other 'breakables'.
Operator and maintenance friendly - Fleet Weigh is a straight forward retro-fit to most industrial moving plant. |
|
| Allows driver to use the same lift truck to handle either single or double pallet loads. Spreading the four forks allows handling of two pallets side by side. When brought together, the four forks convert to two forks ready for single pallet handling. Forks are hydraulically positioned for fast and efficient material handling. Well suited for truck professional trailer loading and unloading. |
|
FORK CLAMP MANUFACTURER WITH FOLDABLE ARMS FOR HANDLING OF BLOCKS AND BRICKS
HYDRAULICALLY FOLDABLE ARMS ALLOW QUICK CHANGE OF APPLICATION FROM HANDLING PALLETS TO LATERAL CLAMPING OF LAYERS OR COMPLETE STACKS OF BLOCKS, BRICKS OR INTERLOCKING PAVING STONES.
THIS FORLIFT TRUCK ATTACHMENT IS IDEAL FOR CONSTRUCTION MATERIAL DISTRIBUTORS WHO COMMISSION LOADS FOR SHIPPING TO BUIDING SITES: |
|
| Cascade has a fork positioner for every application. From warehousing and distribution material handling requirements to wide loads. These units can be ordered with various options-the latest option, for the Mark 55 Fork Positioner, is a Radio Frequency Hydraulic Control-which provides a simple, cost effective means to position forks. |
|
FORK POSITIONERS ARE AN IMPORTANT SUPPLEMENT OF THE FORKLIFT TRUCK MANUFACTURER ESPECIALLY WHERE THE WIDTH OF THE LOAD CONSTANTLY CHANGES. ADJUSTMENT OF THE DISTANCE BETWEEN FORKS TO ACCOMMODATE DIFFERENT WIDTHS IS AN IMPORTANT ASPECT OF SAFEGUARD IN THIS KIND OF OPERATION. KAUP REALISES THE IMPORTANCE OF THESE ATTACHMENTS AND HAS THEREFORE FOUR DIFFERENT RANGES IN ITS PROGRAMME.
THE RANGE T 163 SN: INEXPENSIVE, SIMPLE FORK POSITIONER WITH SYMMETRICAL FORK ADJUSTMENT VIA POSITIVE SYNCHRONISM OVER A ROLLER CHAIN. THE RANGE T 160: VERY ECONOMICAL FORK POSITIONER WHICH ALLOWS THE FORKLIFT TRUCK DRIVER EXCELLENT VIEW ON TO THE FORK TIPS AND THE LOAD. THE RANGE T 466: EXTREMELY VARIABLE CONCEPT WITH A TOTAL OF FOUR DIFFERENT EXECUTIONS, T466 – HOOK ON CONSTRUCTION ALLOWING USE OF ORIGINAL TRUCK FORKS, T466Z - HOOK ON CONSTRUCTION WITH FORKS WELDED ON, T466I – INTEGRATED CONSTRUCTION ALLOWING THE USE OF ORIGINAL TRUCK FORKS, T466IZ – INTEGRATED CONSTRUCTION WITH FORKS WELDED ON. THE RANGES T 411 Z, T 411 BZ, T 411 BZI AND T 411 R FORK POSITIONERS FOR EXTREMELY TOUGH OPERATION. THE T411Z RANGE IS BASED ON THE T400 CLAMPS MANUFACTURERS.
|
|
| Cascade makes forks for lift trucks of all makes, models and sizes. Our product line includes a full range of products for a wide cross section of industrial and commercial applications. |
|
| If the fork-lift truck is operating on ground that is not flat, one of the forks can compensate for the difference in height ensuring the safe loading and unloading of goods without damage. The combination of two integrated cylinders, connected on each side of the fork, makes the SHSS a very powerful vertical positioning equipment. |
|
MSE knows the use of pallets for the storage of goods is unavoidable in a company. But what if you want to save time and space by sending your goods to the customer without using pallets? MSE introduces the RollerForks® which can be used for palletless handling. RollerForks® are in fact ‘standard’ lift truck forks with two layers of rollers. When the under most row of forks touches the floor, it causes the uppermost rollers to rotate in the opposite direction whereby the forks industrial slide under the slipsheet without disturbing the products. When the forks are lifted up, the rollers ‘fall’ downwards and place the products securely on the upper side of the forks, enabling the products to be unloaded in the opposite loading order. The RollerForks® have unique characterisations with regard tot the familiar push-pull system.
|
|
| Designed to provide the agricultural, food processing, and manufacturing markets an efficient and economical means of handling and dumping bins. Can easily accommodate various bin heights by manually adjusting the top bin stops. |
|
| Drum clamps manufacturers are widely used in the petroleum and chemical industries and in other applications that require the handling of standard 55-gallon drums. Drum clamps can also help improve productivity by handling up to four drums per load. |
|
Industrial plant safety is an issue that must be addressed thoroughly, putting employee safety first. Vehicles operating in close proximity to pedestrians are potentially dangerous when combined with the improper use of equipment. The Speedshield SS Compact unit reduces these risks in the workplace, by incorporating measures to ensure that equipment is operated in a safe manner.
The SS Compact provides the minimum level of safety controls for mobile plant equipment. As well as reducing risks in the workplace, the system also helps to save on costs, such as fuel, tyre wear and emissions. |
|
| KOOI-REACHFORKS ® extend hydraulically. They can be used on virtually any type of lift truck and can solve a variety of materials handling challenges. Some of the most common uses include loading and unloading industrial trailers or rail cars from one side, double-deep storage with conventional lift trucks and dual load handling without loose fork extensions. KS ® extend hydraulically. They can be used on virtually any type of lift truck and can solve a variety of materials handling challenges. Some of the most common uses include loading and unloading trailers or rail cars from one side, double-deep storage with conventional lift trucks and dual load handling without loose fork extensions. |
|
| Beverage warehouses and distribution facilities can benefit from the speed and versatility the Layer Picker offers. When building mixed-load pallets, the Cascade Layer Picker handles single layers or multiple layers of both canned and bottled product. Replace costly manual labor with the versatile Cascade Layer Picker. |
|
RAVAS supplies a complete range of professional scales for mounting on manufacturers of forklift trucks.
RCS system
For simple check weighing, where a high accuracy is not required, there is the RCS hydraulic load indication system. With the RCS an oil industrial pressure sensor is installed onto the hydraulic circuit of the forklift by means of a T-coupling. The indicator in the cabin translates the measurement into a weight indication of the load on the forks. The RCS has a limited accuracy, with a possible error of maximum 2% of the lifting capacity of the truck.
The system is meant for simple check weighing, such as the checking of incoming goods, and for avoiding the overloading of lorries, warehouse racking and the forklift truck itself.
RCS PLUS system
The RCS PLUS is an accurate hydraulic weighing system for forklift trucks. On a forklift truck with a capacity of 2.500 kg the weight graduation is displayed in steps of 2 kg, with a 5 kg tolerance (+/- 0.2%). The RCS PLUS weighs by measuring the pressure in the hydraulic lifting system of the forklift truck, via a temperature compensated sensor on a cock block.
During a controlled descent of the mast the pressure in the hydraulic system is measured repeatedly, the software translates these measurements into an accurate weight indication of the load on the forks.
|
|
The INS EP-6 is the ideal weighing system for electric pallet trucks. INS EP-6 can be installed on almost any type of electric pallet truck. Anything from small electric pallet jacks to heavy duty pallet trucks can benefit from mobile weighing.
We have developed the new INS EP-6 with focus on quality and reliability. This means that all mechanical and electronic parts are the top of the line. |
|
| Paper roll clamps suppliers are an ideal tool to handle single or multiple paper rolls in horizontal and vertical position. Bolzoni Auramo paper roll clamp range comprises more than 300 different models, with maximum load capacities from 1.300 kp up to 12.000 kg, and roll diameters up to 2.700 mm. For a safe and non-damaging roll handling, a wide selection of accessories and contact pad options are available. |
|
From the E-series Push/Pull with its high production slipsheet handling capabilities to the QFM models which are ideal for applications requiring quick* and convenient removal and installation of a push/pull attachment, to the Mark 55 Push/Pull with its flexibility to handle slipsheeted as well as palletized product-Cascade has the right product for your application.
*installed or removed in less than one minute |
|
RollerForks® is a special material handling equipment that can be used for loading and unloading of containers or lorries. The forks can be mounted on all existing fork lift trucks with a tilting function. Compared to any other forklift attachment, like the push-pull system, the residual capacity of a lift truck equipped with RollerForks is much higher. This is caused by the little weight of the RollerForks. In practice a heavier lift truck is required when using a push-pull and that will result in higher costs. RollerForks® operate without any hydraulics and can save an extra supplier of hydraulic valve and all related industrial hoses through the mast. Compared to the push-pull system the purchase costs of a pair of RollerForks® is at least 50% of the Push-pull.
The RollerFork® consists of a special lift truck fork that serves as a supporting frame with a special hinge in the heel allowing it to always lie flat on the floor. Inside the fork are two layers of industrial rollers , one on top of the other, that drive each other when the forks are moved over the floor. The basic principle is that the upper rollers rotate at exactly the same speed but in the opposite direction as the lower rollers, which are in contact with the ground. When the RollerFork is lifted from the ground the rollers automatically lower and the load is held on the forks. The RollerFork and the rollers are made of high-grade materials, and because there are no axial forces there is hardly any wear and tear. Any dust and dirt will end up on the floor.
|
|
| Rotators give your driver the ability to quickly dump or invert a load, and then immediately return the forks to the pick-up position in one continuous motion. Cascade rotators are widely used in food processing, automotive manufacturing, chemical processing, recycling operations, smelting and casting operations, and general manufacturing--anywhere it is necessary to dump bins or tote boxes. |
|
| DUE TO THE KAUP MODULAR SYSTEM WHICH IS CONSEQUENTLY FOLLOWED AND INCLUDES ROTATORS AS WELL AS MANUFACTURER OF CLAMPS AND SIDESHIFTERS ALL CLAMPS CAN, IN PRINCIPAL, BE BUILT ON TO A ROTATING HEAD. NATURALLY THIS DOES NOT MAKE SENSE WITH EVERY EXECUTION OF CLAMP. THE BEST KNOWN ROTATING CLAMPS ARE ROLL CLAMPS, FORK CLAMPS, BALE CLAMPS AND PALLET TURNOVER CLAMPS. |
|
Speedshield SSV3 is the latest version of the award winning safety system for industrial vehicles. Speedshield's revolutionary system allows safety conscious companies to control and monitor their entire fleet of vehicles in real time, mitigating the ever growing risks in today's workplace.
As well as reducing risks in the workplace, the system also helps to save on costs, such as fuel, tyre wear and emissions. Speedshield should be an integral part of the minimum safety specifications for your site. |
|
| Cascade manufactures a variety of products that enable the conventional lift truck to become a more versatile and efficient materials handling tool. These products enable a lift truck to pull, push, manufacturer of clamp, lift, sideshift and rotate practically any unit load imaginable. If you don't see what you're looking for-contact your nearest sales office. |
|
| KOOI-REACHFORKS ® extend hydraulically. They can be used on virtually any type of lift truck and can solve a variety of materials handling challenges. Some of the most common uses include loading and unloading industrial trailers or rail cars from one side, double-deep storage with conventional lift trucks and dual load handling without loose fork extensions. KS ® extend hydraulically. They can be used on virtually any type of lift truck and can solve a variety of materials handling challenges. Some of the most common uses include loading and unloading trailers or rail cars from one side, double-deep storage with conventional lift trucks and dual load handling without loose fork extensions. |
|
The advantages of the WINKEL lift masts:
unique type variety (20,000 different styles)
long service life
convincing technic
optimum free-sight
high standard of security
To all WINKEL lift masts we deliver:
integrated hydraulical attachments
manufacturer of hose reels (300 basic models, 1000 versions)
integrated or attached sideshifters
attachments
forks
More technical characteristics:
warm temper-rolled, high abrasion resistant
U- and double-T-profiles in fine straightened style
high surface strength and low tolerance lead
to a solid mast
all lifting-cylinders with precise hard-chromed rods
"Flyer chains" with DIN- and ISO-Standard
fork carriage with FEM-Standard and good freesight
mounting brackets and painting for every fork lift truck |
|
The XZM and STABIL‘X XZM TL were developed for mechanical handling trucks travelling short distances (up to 15 km in an hour) at speeds not exceeding 35 km/h, running over aggressive and abrasive surfaces.
Their massive tread and very thick crown and sidewalls protected by internal reinforcements make these professional tires very robust with excellent wear resistance.
Their radial carcass cushions vibration offering ride comfort and security for goods and mechanical parts.
|
|
| The truck mounted weighing system enables you to weigh goods on site. This not only saves time but also eliminates the risk of damage during transport to a fixed balance platform. The system has been specifically designed to check the weight of incoming, outgoing goods, quantity, count components and for dosing purposes. |
|
|
|
Accessories for forklift trucks
