|
|
| Products 91 to 120 of 142 |
Demag DCM-Pro Manulift:
The DCM-Pro Manulift was developed for handling loads quickly and safely with only one hand. The new DCM-Pro is based on the lifting unit of the DC-Pro chain hoist and the DSM-C control unit which is connected to it by a helical cable. Thanks to the control unit which is rigidly connected to the load handling attachment for right and left-handed operation, the operator only needs one hand to operate the chain hoist and guide the load.
|
|
|
The new Yale hand chain hoist VSplus is through further technical development the successor of our proven VS model. We set new standards with the extremely robust all-steel construction and high quality bearings for drive pinion, load chain sheave and gearbox. A maximum of corrosion prevention and maintenance friendliness are special features of this model.
|
|
Synchronized hoist low headroom 2 falls
• for absolutely synchronised raising and lowering
• for long and bulky loads
• assures precise positioning of the loads
Synchronized hoist normal headroom 2 falls
• specially for high rooms
• for absolutely synchronised raising and lowering
• for long and bulky loads
• assures precise positioning of the loads
Synchronized hoist 4 falls
• for absolutely synchronised raising and lowering
• for long and bulky loads
• assures precise positioning of the loads
• prevent rotating or pivoting of the load
|
|
The Demag Travel Wheel System is designed to move loads over a wide range of speeds and applications.
The Travel Wheel System incorporates Demag wheelblocks, which are available in 8 sizes with a wheel load range up to 40 tons per wheel. Our range of travel gearmotors offers smooth acceleration and deceleration. These wheels can be used for transfer cars, cranes or any type of moveable machinery.
|
|
The DRS wheel block system is a versatile wheel block system with optimum performance ratios for a maximum load capacity – from 2.75 t to 40 t – with compact dimensions. Finely graded sizes (DRS 112 to DRS 500) ensure that the right DRS unit is selected for the corresponding application.
A wide variety of travel wheel designs are available from the standard range to meet customer requirements. The housing, which is machined on all sides, can be connected to virtually any customer design.
Offset and angular geared motors from the Demag modular system are available for the driven variant as individual or central drive units.
|
|
Wheel blocs:
- wheel load 1000 /2000 / 4000 kg
- driven/not driven
- fixed/floating version
- Steel/Vulkollan coated version
- all housings galvanized
- multiple use
Advantages:
- leveled floor track
- robust, cost effective
|
|
|
|
|
|
Variable Speed Chain Hoist | Die Setter
Set Dies and Molds Precisely with Ultra Low Speed Hoist Positioning
Specifically designed to improve mold placement accuracy, the two-speed die setter low speed chain hoist features ultra low speed hook movement for exact die positioning as well as the standard speed for normal use. To reduce die impact damage and shock loading conditions, the low speed setting may be set to 1.5 feet per minute without sacrificing the normal lift speed of the hoist.
The variable speed hoist feature permits fine mold positioning without continuous hoist jogging. Low speed hook travel on David Round's die setter hoist is available in both the up and down directions unlike other creep or step-controlled hoists that may only lower at the low speed setting.
With these electric hoists, both the standard and low speed settings may be adjusted in the field to meet specific application requirements. A variery of pendant configurations are available as well as low-speed trolleys, jib cranes and monorail systems.
Position and handle dies at ultra low speeds as low as 1.5 FPM
Various models available from 1/2 to 5 ton load capacities
Position loads precisely with continuously jogging hoist
True vertical lifting path eliminates side-to-side hook travel
Benefits of the Die Setter Hoist
Accurately align mating equipment and mold sections with precise load control Increase hoist motor life by eliminating the need for continuous hoist jogging
Eliminate re-calibration time by gently loading sensitive testing and measuring equipment
Replace expensive air-powered hoists with this economical electric chain hoist
|
|
Safety is our primary concern - The new DR wire rope hoist has the standard features you need, for safe operation you can trust.
- Brake & Load Spectrum Monitor
- Wire Rope Pinch Protection
- Bottom Block Grip Handle
- Trolley Drop Stops
- Audible Warning Device
Reliability you can expect - Designed for long life and backed with a long 2 year "no catch" warranty.
The DH hoist is the Performance Standard for your high capacity lifting requirements.
- Modular design - Many configurations, speeds, rope lead off positions and reeving arrangements are possible. Base mounted and a variety of standard trolley designs are available.
- Heavy Duty - High duty, high cycle rated hoists with single, 2 speed, or VFC, lug or trolley mounted, to 100 Ton Capacity
- Many features & options - Demag DH wire rope hoists incorporate advanced electrical and mechanical engineering features and options - standard rope guides, optional "Load Halt" and overload protection.
|
|
|
DR rope hoists and Demag standard cranes make it possible to achieve a wide variety of designs which guarantee to provide an optimum balance between costs and performance to meet your specific needs. In addition to a space-saving design, they offer particularly high hoist speeds for fast handling rates and comprehensive standard features. The range of possible applications for the rope hoist is extended by the compact double-rail crab and the versatile foot hoist variant.
|
|
The H-LIFT wire rope pulling hoist is an extremely versatile and portable unit for pulling, lifting, lowering and securing loads, that is both easy and safe to operate. It comes in three sizes with capacities of 800kg, 1600kg and 3200kg.
All hoists are supplied complete with 20 meter wire rope and an extendable operating lever.
Wire rope is tapered one end and fitted with a hook and safety catch at the other end.
The hoist has low maintenance requirements and is easy to service.
Overload protection ensures high personal safety when in operation.
Specially built-in shear pins can be replaced without removing the load.
|
|
Range supplements hoists HPR, suspended and double rollings up.
All tonnages - important Stock
Consult your outline dimensions on our Internet site www.seral.fr
|
|
The rigorously modular construction of STAHL CraneSystems's SH and SHW ranges permits practically unlimited combinations of components both for simple and for individual solutions. The modular system ensures efficient production at the highest level of quality and maximum flexibility. Five frame sizes of the SH range with 26 S.W.L. variants, from 500 kg to 100,000 kg, are available and can be used in standardised cranes, custom-built cranes or in overhead conveyor systems.
STAHL CraneSystems's SH wire rope hoists are also available in explosion-protected design.
STAHL CraneSystems was the first manufacturer to implement the latest ATEX regulations on mechanical explosion protection in the whole production range.
|
|
Electric winches of lifting in conformity with the standards, regulations and texts in force defining the elevating lifting devices. For small handling in mobile workshops, on cranes and brackets, for commercial vehicles or heavy trucks.
WARN H 3000 GF: 880 daN. Available in 12 or 24 V
WARN H 500: 400 daN. Available in 12 or 24 V
WARN H 350: 245 daN. Available in 12 or 24 V
|
|
The New Century Séries® Wîrc Rope Hoists -1 to 25 Ton Capacîty
The Design Results From Years of Material Handling Engineering and Manufacturing Knowledge and Experience-Utilizing Space-Age Techniques and Materials While Retaîning the Superior Design Features and Quality of Current Hoists.
Standard Features: OVERLOAD CUTOFF
Protects load, hoist and operator by înterrupting raîsing circuit when hoist sensés a damaging overload. When lifting circuit is interrupted, the lowering circuit remains intact to allow the load to be lowered and removed. After the overload is removed the lifting circuit is automatically restored. Overload Cutoff is accessible for fïeld adjustments.
|
|
| ... products without technical information |
| |
|
|
Hoists
