|
|
|
E-Z Tec 9000 range metal detectors and separators are used in a variety of industries including plastics, recycling, wood and textiles to detect and divert from product lines all types of metal contaminants, including stainless steel
|
|
|
|
|
|
The GARVENS XS3 CC H CombiChecker is a HACCP compliant in-line checkweighing and metal detection combination system. These two world-leading product inspection technologies combined with the very hygienic design make this checkweighing combination the food industry Nr. 1 brand protection choice.
The XS3 CC H checkweigher is suitable for dynamically weighing products up to 6000g with an accuracy from ± 0.1 g and a maximum throughput of 400 ppm.
Whilst the checkweigher measures product weights fast and precisely, rejecting out of tolerance products, the metal detector reliably detects and rejects products contaminated by metal. Common contaminants which are detected range from nuts and bolts down to small metal filings, staples, needles or pieces of wire. The rejection of badproducts is ensured by two rejecting devices so that metal-contaminated and off-weight products can be separately rejected.
Product and water build-up/contamination is minimized by avoiding level surfaces on the conveyor and weighcell supports, as well as the exclusive use of round tubes on the horizontal section of the frame. The patented, minimal contact, conveyor support clamps and open frame construction facilitate easy cleaning. Seam welding improves hygiene and reduces the risk of bacteria build-up.
Features and Benefits:
One Single User Interface for both Systems
The single 15" touch screen interface and comprehensive display of current weight and production data makes product change fast and simple. It’s intuitive, clear and easy to understand symbol menu system significantly reduces possible operator errors and increases productivity.
|
|
|
Combination of checkweigher and metal detector, compact design, central operation, logbook recording, optional conveyors in stainless steel available
|
|
|
|
|
|
If the production demands it, the section with metal-detector is available and it can be added in a standard checkweigher: the connection with the standard checkweigher is very simple: it's enough to insert the connector and the metal-detector section is operating.
Compact
With the integration of a metal-detector - mono-frequency or multi-frequency - the standard checkweigher HSC350 reassumes in the minimal space the necessary functions for a standard end-line.
Large range
The metal-detector is available in two versions: mono-frequency Series M and series S of small dimensions. It can be supplied also lacking of standard checkweigher like independent unit equipped of ejector and accessories.
Agro-industrial and more...
The contaminated product can be expelled with a shunter dedicated and accumulated "under key" in observance to the enforced norms on the pre-packing. The line arranged with mteal-detector comes used particularly in the alimentary field, but it can be easy integrated in every other production line.
Performance without compromises
HSC350 is conformed with the OIML R51 Class III in the various versions until 270 piece for minute, as checkweigher in standard X(1) and as price labeler in standard Y(a).
|
|
The checkweigher with Metal Detector TG32 TM enables a double control of weight and metal particles, for sets of pre-packed products continuously.
The checkweigher with MD TG32 TM is completely made in stainless steel. Its circular tube frame, without points of retention, makes easier its cleaning. Cantilever design enables a rapid change without any tools.
As the whole set TG3, the checkweigher with MD is completely designed and manufactured with standard materials of the market.
|
|
|
|
|
|
Now you can have both accurate weight control and the assurance that your product is free of metal contaminates all in a single source. This system features the superior performance and accuracy of a Thermo Scientific checkweigher with the high sensitivity of a metal detector with a minimal space requirement.
Product Detail
The metal detector/checkweigher combo provides both checkweighing and metal detection with a minimum space requirement. This system features the superior performance and accuracy of a Ramsey checkweigher with the high sensitivity of a Thermo Scientific metal detector. This unique arrangement eliminates the expense of a separate conveyor for the metal detector.
Output signals from the metal detector and checkweigher operate independent rejects. One rejects metal contaminated products, while the other rejects off weight products. This feature keeps metal contaminated products separate from potentially reusable off weight products.
The checkweighers have the design capability of being basic checkweighers or sophisticated comprehensive statistical systems. Availability of three or five weight zones, 100 product set-ups, auto zero and a host of features such as scope free calibration make the checkweighers user-friendly.
The Thermo Scientific metal detectors, reflecting the proud history of the Goring Kerr brand, bring you the highest levels of sensitivity and stability with the lowest levels of false rejects. Metal detectors available in a combo system include the small footprint IP69K rated DSP-IP+ and the latest technology APEX models.
|
|
ELCON
Single-face metal detector for installation on coveyor belts and material chutes.
The single-face metal detector ELCON is used to inspect poured or bulk materials, preferably of a thin nature, on belt conveyers or material chutes.
It detects all magnetic and non-magnetic metal contamination (steel, stainless steel, aluminum...) even if enclosed in the product.
On detection of metal, a signal device and a separation system can be activated or a signal can be send to the process controlling.
■ Detection of magnetic and non-magnetic metal contamination, even if enclosed in the product
■ Reduced costs regarding breakdown of machinery product waste
■ Secures product quality
■ Protects against customer complaints
■ S+S metal detectors amortise within short time periods
|
|
|
|
|
|
In order to provide you and your customers with the highest possible quality and with a sense of security, we recommend the use of a metal detector in your tableting process. The device is positioned after the tableting or de-dusting units, and detects any tablets contaminated by metal pieces or objects that have found their way into the process. The unacceptable tablets are then reliably ejected by a high-speed electrically operated flap. One of the chief benefits is maximization of operating times in production.
Ceia Metal Detector
On top of the remarkable throughput figures, theoretically extending up to 1,800,000 tablets/hour, and the high sensitivity with which metallic particles are detected, the fail-safe design...
Lock Metal Detector
Detection is reliable even when the maximum of 30,000 tablets per minute are passing through the machine under difficult conditions.
Loma Metal Detector
Meeting hygienic standards is a key aspect of production. All those parts in the IQ² series that come into contact with the product are therefore made from high-quality plastics and stainless steel.
Safeline Metal Detector
The Safeline detector offers an Ethernet interface for the collection of operating data. This permits connection to operational data management systems.
|
|
Free falling powder and bulk products
Pipe Ø 100-600 mm / 4-24 inch
or Pipe Ø 100-300 mm / 4-12 inch
Typically, the GF types are used in gravity feed pipes and provide highest performance in detecting magnetic and non-magnetic metals. The bulk material falls through the metal detector. With the reject flap EX-S smallest metal objects are separated out of the product stream promptly.
With a maintenance free design and high quality construction, for reliable operation in the most challenging industrial environments.
|
|
|
|
|
|
The Gravity Feed Metal Detection System is designed to inspect free-flowing solids such as powder, granules and pellets. The compact design and fast acting electronics allow for installation in almost any application.
Product Detail
Our customers require increasingly sensitive and sophisticated detection equipment that play an important role in ensuring that the highest quality product is being consistently delivered to their customers. The Gravity Feed Metal Detection System is designed to inspect free-flowing solids such as powder, granules and pellets. The compact design and fast acting electronics allow for installation in almost any application.
Utilizing the latest in Digital Signal Processing technology, the Gravity Feed Metal Detection System delivers the highest level of metal detection to date. The advanced user-friendly interface allows quick and easy application set-up. A comprehensive, self-diagnostic system monitors the metal detectors performance for potential circuitry changes. It is also capable of sensing the speed and position of the reject gate. A multi-level password security system insures maximum performance by limiting access to critical settings.
|
|
Ultra High Sensitivity
Sensor Ø 10/25/35 mm
The R types provide highest performance in detecting magnetic and non-magnetic metals. Typically, applications are in the medical pharmaceutical sector as well as sanitary items, foods and chemical powders. The product falls through the R sensor head and an optional reject unit. With the reject unit smallest metal objects are separated out of the goods' stream promptly.
|
|
weber Sensors foto-captor Hot Metal Detector systems (HMD's) track the metal from slab reheat furnace to exit coil conveyor.
They respond only to infrared energy within the viewing field:
They won't confuse your computer with "maybe" signals from visible light, steam, cooling water or scale.
The foto-captor systems feature sealed construction in rugged stainless steel housings, two-wire AC power with short circuit protection, and the ultimate in simplicity -- no adjustments.
Available options include remote lens systems, water-cooled jackets and air purges.
|
|
|
|
|
|
The new equipment R-SIM, developed by REGULATOR-CETRISA, can detect any metal and separate it from the rest of the non-metallic materials.
The result: having a good separated fraction of metals or rather material that is free of metals.
The operating principle of the Metal Separator by Inductive Detection and Blowing (R-SIM) is based on having a combination of highly efficient sensors available that cover the entire width of the equipment. A metal on the detector produces a signal that is processed at high speed due to an electronic advancement (CPU). It then acts on a complex pneumatic system that carries out the physical separation. A studied distribution of the detectors, the high capacity of processing information and a precise system of pneumatic valves allow the metal to be “blown”, changing its path and separating it from the natural path and the rest of the materials.
The Metal Separator by Inductive Detection and Blowing (R-SIM) has an acceleration belt that can handle large volumes of processed material. Likewise, a PC with a touch screen can modify and adjust the different parameters in order to obtain the optimum separation.
The R-SIM is equipped with a filtering system of air and pneumatic control that ensures the air quality and pressure that are necessary for the equipment to run correctly.
|
|
stainless, residue, municipal waste, WTE-Ash electronic-scrap, wood chips, glass, mould sand
The inductive sorting system ISS® is the perfect solution to recover the non-ferrous metals not recovered by ECS processing or magnetic separation. The ISS® provides efficient and effective automated recovery of metals, stainless steel and any other metals, eliminating the need for hand picking. The primary applications for the ISS® are shredder residue, electronic scrap, wood chips, glass, domestic waste, and mould sand.
The recovery of stainless steel from ECS waste streams and the processing of electronic scrap are ideal uses for the ISS®. The ISS® is the solution for removing tramp metal from bulk material to ensure the quality of the processed product.
|
|
The METAL SHARK BD sets new standards for high sensitivity metal detectors.
Typically, the BD types are used in conveyor belts and provide highest
performance in detecting magnetic and non-magnetic metals. Different methods are available to reject metal objects (pusher, belt stop + alarm etc).
Sensor and control unit housing are made of sturdy stainless steel, appropriate for use in the food industry. With a maintenance free design and high quality construction, for reliable operation in the most challenging industrial environments.
|
|
Metal detector ER model.
This is the star product of our range because of its resolution and simplicity of installation.
It consist of a detection coil that is mounted underneath the conveyor belt. When a piece of metal passes over the detector, mixed in with the stone, a signal is triggered that, duly amplified, is transmitted to the control switchboard and causes the feeder belt to come to a halt, at the same time as the acoustic and visual alarm indicate the detection.
|
|
|
|
|
|
Eriez manufactures the broadest range of metal detectors in the industry. Whether looking for small ferrous or nonferrous metal pieces, tramp metal or digger teeth, we can provide you with a metal detector to solve practically every metal contamination problem.
E-Z Tec® Metal Detectors
Extremely sensitive metal detector capable of detecting ferrous,nonferrous and stainless steel metals in dry and conductive products produced in the food, dairy, pharmaceutical, chemical, paper, rubber and textile industries. In addition to protecting products from metal contamination, this metal detector is used to protect downstream equipment from costly damage.
Metalarm Metal Detectors
Used in the aggregate, coal and wood industries, the Metalarm Metal Detectors are designed primarily to protect downstream equipment from damaging tramp metal (i.e. digger teeth, axe heads, etc.), Other models are suitable for the plastic and textile markets, where smaller pieces of metal need to be detected.
1200 Series Metal Detectors
Seven models available to handle a wide range of applications, from detecting medium and larger ferrous and nonferrous particles traveling at speeds up to 1200fpm (363mpm), to detecting small pieces of metal in wet conductive products.
|
|
METAL DETECTORS
Metal detectors remove ALL metals, also non magnetic such as aluminium, copper, brass, etc; from 0,5 mm
On detection, a signal follows driving a valve or stops the belt Suitable for belt widths up to 2000 mm or free-fall and vacuum or pressure transport.
Electrical current required
Operation by powerful ADM05 touch screen control
Can be used in accordance with ATEX regulations for dust explosion zone 20.
Specific application for metal detectors: recycling, foodstuffs, bulk-handling, pharma and ceramic industries.
|
|
|
Custom-manufactured metal detectors with a wide range of options for special applications. Detectors are often supplied together with magnetic separators.
|
|
Reliable detection of metallic contamination, even through aluminized packaging. Self-optimizing, self-learning and meets all documentation requirements.
Protection for both consumer and machine thanks to stateof-the-art metal detection technology.
• Multi-frequency systems and multi-channel technology guarantee safe detection, unsusceptible to disturbances
• Numerous QA functions support complete documentation as proof of quality assurance
• Particularly simple, safe operation with integrated online help
• 4 different equipment ranges
|
|
|
In many areas a quick analysis of the materials used is necessary. Examples here include sorting beverage cans made of aluminium or tin, or the differentiation of pipes made of different metals which have been manufactured in the same plant. Turck has developed an analogue inductive sensor for this purpose that not only processes the amplitude signal but also the phase signal. Both signals are output as analogue values and can be processed mathematically with the programmable I/O systems BL20 or BL67. The great advantage of this inductive analogue measurement is the distance independent detection of metals.
|
|
Metal detection technology is used primarily in the foodstuffs and also the hygiene, paper, chemicals, pharmaceuticals and wood industries to protect people and the machines. The highly sensitive metal detectors recognise not only magnetic and non-magnetic metals, but also very small stainless steel parts with a high specific resistance. With our search heads, we can also realise high speeds and detection through metal films.
|
|
|
|
|
|
Magnetic Locators GA-72Cd
- Unmatched sensitivity allows you to find what you're looking for quickly, without the risk of passing over your target.
- Our locators last 100% to 250% longer than others, making your investment a solid one.
- Audio signal and 3-digit LCD readout
- 85% of the Surveyor market can't be wrong.
Magnetic Locators GA-52Cx
- Unmatched sensitivity allows you to find what you're looking for quickly, without the risk of passing over your target.
- Our locators last 100% to 250% longer than others,
making your investment a solid one.
- 85% of the Surveyor market can't be wrong.
Quality Is Our Hallmark
Schonstedt's underground magnetic locators have been setting the standards for reliability and dependability for over 30 years. They are designed to withstand the rigors of daily on-site usage and a wide range of environmental conditions. In fact, the Model GA-72Cd is backed by a 5-year warranty and the Model GA-52Cx is so rugged and dependable it's backed by a 7-year warranty.
|
|
METTLER TOLEDO SAFELINE is the global market leader in the field of industrial metal detection for the food and pharmaceutical processing and packaging industries. SAFELINE metal detection solutions offer maximum detection sensitivity with minimum false rejects.
SAFELINE metal detectors for food processing can inspect product in all formats from packaged conveyorised food products to bulk powder or granular materials through to liquids, pastes and slurries. Systems can be utilised to provide compliance with food safety inspection standards, industry guidance and legislation.
SAFELINE pharmaceutical metal detectors provide self contained inspection systems for use with all tablets, capsules and pharmaceutical powders. These systems ensure compliance with regulatory requirements, validation and qualification of procedures.
|
|
The metal detector IQ is a inspection complete solution, assuring a few high levels of quality in processes of production that it guarantees an excellent result.
- Adjustment of Intelligent Sensibility: the equipment allows to realize the adjustments of every product of manual or automatic form.
- System of PVS Validation: The equipment can be prepared to request the operator who checks its functioning of simple and rapid form.
|
|
Flat metal detector for conveyor installation, Typical use in the aggregate/mining/stone/earth processing, IP65.
Analogue control box, Autom. magnetite/ferrooxyde compensation, Wall installation, Sheet steel housing RAL7032 grey, IP55, 10m sensor link cable
|
|
Metal detector GR Model.
This is a metal detector with a structure consisting of two detection coils. It is installed on a conveyor belt forming a tunnel, through which the material to be analysed passes. When a piece of metal passes over the detector, mixed in with the stone, a signal is triggered that, duly amplified, is transmitted to the control switchboard and causes the feeder belt to come to a halt, at the same time as the acoustic and visual alarm indicate the detection.
|
|
The SQ (single probe) and SQTA (tandem probe) series of metal detectors are designed to provide protection and monitoring. They are used in all situations where a warning must be given about disruptive and harmful pieces of metal in the material being conveyed.
Applications of SQ and SQTA metal detectors: Quarries, Lime works, Clinker works, Sand pits, Cement factories, Slag processing, Building material recycling, Brickworks, Coal-burning power stations.
|
|
Conveyor for METAL SHARK metal detectors
Cassel takes great pride in the engineering and manufacturing of their series HQ conveyors to compliment their METAL SHARK metal detectors.
The conveyor's design has been adapted to the special requirements of metal detectors to provide optimum operation.
|
|
Eriez manufactures the broadest range of metal detectors in the industry. Whether looking for small ferrous or nonferrous metal pieces, tramp metal or digger teeth, we can provide you with a metal detector to solve practically every metal contamination problem. Contact us for our assistance in selecting the appropriate metal detector for your application.
Eriez also manufactures a full line of Cabinet X-Ray equipment to meet your full Inspection System needs.
|
|
|
|
Metal detectors
