|
|
| E-Z Tec 9000 range professional metal detectors and industrial separators are used in a variety of industries including plastics, recycling, wood and textiles to detect and divert from product lines all types of metal contaminants, including stainless steel |
|
The HC-MDi check weigher is an efficient combination of checkweigher and industrial metal detector. The “i” in HC-MDi stands for the metal detector. It is fully incorporated within the checkweigher, so that weight module and metal detector form one single unit. The combination is achieved within the tightest of space constraints with a central, single point menu operation for both devices via the weighing module controller. The HC control concept is based on a fully integrated industrial PC system.
It has an output capacity of 400 pieces / min. What is more, in terms of measurement precision, it operates with a maximum standard deviation of 50 mg over a gross weighing capacity of 3750 g. The sub-frame is made entirely of stainless steel and meets a protection rating of IP 65 (spray water from above). This makes it predestined for use in the food industry. The HC-MDi weighs packed and unpacked food products with precision and additionally checks them for metal contamination. When the product input is changed on the checkweigher, these parameters are communicated automatically to the metal detector. As an integral part of the device, the high frequency metal detector can detect very low-level contamination in the form of steel, iron, stainless steel, aluminium, copper, brass etc. |
|
| Ideal for material recovery facilities wishing to automate removal of aluminum beverage cans from commingled recyclables. Available in feed widths of 24, 36 and 48 inches (610, 914 and 1220 mm). |
|
Ideal for material recovery facilities wishing to automate removal of nonferrous metals from trash, MSW, sand, glass, dirt, electronic scrap and shredded automobiles. Available in feed widths of 24, 36, 48 and 60 inches (610, 914, 1220, and 1524 mm).
Foundry Sand: remove non-ferrous metals like aluminum or brass from spent foundry sandmold chunks. This provides a remeltable metal and the sand can be treated and reused or land-filled as non-hazardous waste.
Glass: remove nonferrous metals from recycled glass industrial monitors, fluorescent bulbs and other specialty glass.
Wood Waste: the final step in purifying shredded pallets, wood paneling and lumber before it is ground and mixed with resins to professional press out medium density fiberboard (MDF).
PET/Plastics: remove trace amounts of small nonferrous metallics from granulated plastic PET beverage bottles. This allows the flakes to be used to make new products including banding.
Professional boiler Bottom Ash: remove nonferrous metals from bottom ash generated by refuse (garbage) fueled co-gen plants. Aluminum used beverage cans (UBCs) that look like nuggets and red metals like faucets/plumbing hardware are typically repelled.
|
|
Free falling powder and bulk products
Professional pipe Ø 100-600 mm / 4-24 inch
or Pipe Ø 100-300 mm / 4-12 inch
Typically, the GF types are used in gravity feed pipes and provide highest performance in detecting magnetic and non-magnetic metals. The bulk material falls through the industrial metal detector. With the reject flap EX-S smallest metal objects are separated out of the product stream promptly.
With a maintenance free design and high quality construction, for reliable operation in the most challenging industrial environments. |
|
High intensity manufacturer of magnetic separators for optimum separation of paramagnetic particles from dry products
Key areas of application: to remove paramagnetic minerals; to separate fine irons from ceramic raw materials and spray dried ceramics, to eliminate fine iron contamination in granulated plastics / plastic beads in the plastics recycling industry
Most comprehensive selection: diameters of 75mm, 100mm and 300mm in a variety of widths
|
|
HIGH-INTENSITY INDUSTRIAL SEPARATOR
This magnetic separator is so powerful that it can separate all paramagnetic and slightly magnetized materials from non-magnetic materials. Stainless steel that is processed through a industrial shredder has these lightly magnetized properties and can be separated like this. This high-intensity separator is also employed for the removal of very small Fe particles from ceramic powders.
Removal of all weak magnetic particles, stainless steel, iron or nickel-bound raw materials
Continuous automatic cleaning
Suitable for the removal of particles from 50 mhu upwards in the recycling and ceramics industry
Suitable for belt-widths up to 2000 mm
Supply voltage essential
|
|
Ultra High Sensitivity
Sensor Ø 10/25/35 mm
The R types provide highest performance in detecting magnetic and non-magnetic metals. Typically, applications are in the medical pharmaceutical sector as well as sanitary items, foods and chemical powders. The product falls through the R sensor head and an optional reject unit. With the reject unit smallest metal objects are separated out of the goods' stream promptly. |
|
weber Sensors foto-captor Hot Industrial metal detector systems (HMD's) track the metal from slab reheat industrial furnace to exit coil manufacturers of conveyor.
They respond only to infrared energy within the viewing field:
They won't confuse your computer with "maybe" signals from visible light, steam, cooling water or scale.
The foto-captor systems feature sealed construction in rugged stainless steel housings, two-wire AC power with short circuit protection, and the ultimate in simplicity -- no adjustments.
Available options include remote lens systems, water-cooled jackets and air purges. |
|
Bunting HF Series Permanent Drawer Magnets can handle a wide variety of separation tasks. They're built for easy installation in square, rectangular, or round spouting used in gravity conveying systems. We can supply both top and bottom spouting adapters to your specifications to reduce in-house fabrication. HF Drawers have two or more trays arranged so that the magnetic cartridges are staggered to increase contact with the product flow. Material moves in a zig-zag pattern from one cartridge tray to the next for thorough cleaning.
Standard drawer housings are constructed of heavy-duty mild steel. Stainless steel housings are also available. They're required for certain sanitary applications and whenever Rare Earth magnets are used. Stainless steel stands up to most corrosive environments, resists wear, and is the right choice when "cleaning room" standards must be met. Optional adapters permit easy installation of housings in most round, square, or rectangular spouting. |
|
Based on Nd-Fe-B permanent industrial magnets, the AMT&C’s magnetic pulley industrial separators are designed for removing tramp metal from the stream of non-ferrous bulk materials, such as crushed stone, coal, sand, grain, and others, conveyed by belt conveyors manufacturers. Pulley separators are usually installed at the discharge end of a belt conveyor specifications as a head or driven pulley. Ferromagnetic inclusions are held by the magnetic field in such a way that their subsequent trajectory deviates from the vertical downward path of the “cleaned” product; on exiting the pulley magnetic field, the tramp metal is discharged into a hopper that is usually placed underneath the conveyor end.
Application areas:
Mining, wood-, food-processing, chemical, construction, and other industries
Advantages:
• Energy cost saving
• As heavy as 50 kg metal objects are removed
• Easy to mount
• No maintenance is required
• Lifetime is over 15 years
System components: Nd-Fe-B permanent magnets
Technical data:
Conveyor belt manufacturers width: 400-2000 mm
Pulley diameter: 150-800 mm
Maximum flux density on the pulley surface: up to 0.9 T
Extraction depth: 150-400 mm
Working temperature: -70 – up to +300 C0 (for high temperatures, Sm-Co permanent magnets are used)
Conveyor belt speed: up to 3 m/s
For further information please contact Alexander Sinyakov, export sales manager, tel. 7 495 436 5915, e-mail: sale1@amtc.org
|
|
Magnetic drum TM model.
The magnetic drum TM substitutes the drive drum of the manufacturer of conveyor belt, separating ferric metals from any other inert , loose product. When it reaches the end of the professional belt, the material conveyed falls but the ferric metals are retainded by the drum, falling in a different direction to the purified material. |
|
Permanent supplier of magnetic separators used for the automatic separation of ferrous metals and stainless steel
Ferrite models remove tramp and fine iron from dry bulk materials and Rare Earth models with 25 times the field strength of conventional ferrite magnetic are able to separate very fine irons from both dry bulk materials/powders and slurries.
Key features: versatile, low maintenance, self-cleaning, choice of drum widths, custom-design
|
|
The drum magnet is an automated separation system. The separator drum is powered by an angle gear motor and revolutions are controlled via a frequency inverter.
Advantages
The magnetic field is adjustable to ensure best possible separation of contaminants and good material. This complete solution can be fully and easily integrated into the customer’s existing systems. |
|
| We produce custom designed and built industrial separators for all industrial applications. We can give engineering and magnetic advice on separators. |
|
Magma is the only magnet manufacturer in Israel that provides magnetic solutions for all types of industries.
Following a cooperative venture initiated between Magma and A.B Pro Ltd, it is now possible to meet the varying magnetic needs of even the most complex mechanical engineering project designs.
Magma offers assistance in various ways, from finding solutions starting as early as the initial design stages, determining magnetic needs and properties, prototype development, to full-scale production of the finished product.
Magma operates a state of the art QA laboratory and supplies a wide variety of magnetization services, magnetism assessment and analysis.
A unique division within Magma offers engineering development and design solutions, integrating the company's physical and engineering capabilities to provide a comprehensive solution in the field of planning and magnetization.
Magma specializes in renovating, renewing and upgrading existing systems.
Magma also maintains a department specially equipped and staffed to design and manufacture manufacturer of magnetic separators and all types of lifting equipment, e.g. magnetic drums, candles and plates as well as magnetic and integrated suppliers of conveyors. |
|
4B offers a large range of magnetic separators for both agricultural and industrial environments.
These products have been designed for the purpose of filtering and decontaminating the products that flow through / past them and to protect the machines from destructive metallic objects.
They are available in different forms: rods, strip magnets, drum magnets, grids, etc..single or double-housed and with different strengths, up to 11000 gauss.
They allow to extract ferrous and stainless steel contaminants which result from the mechanical usage of the machinery. |
|
MAGNETIC SELF-UNLOADING INDUSTRIAL SEPARATORS
They are intended to extract and to remove automatically ferromagnetic impurities and things from free-flowing bulk materials that carried by a conveyer professional belt from 650 to 2000 mm wide.
Extracted ferromagnetic things are disposed by conveyer belt into a storage. |
|
Overband with permanent magnetic OPL model.
These unit consist of either a permanent magnet PL or an electrical magnet DEP, depending on the required output, located above a conveying belt. Any pieces of iron, or other magnetic metals, that pass under the magnet, mixed with the material being conveyed, will be attracted and retained by the magnet, thus separating them from the material they were mixed with, given that the separator is surrounded by a conveyor manufacturers belt, with dimensions that are suitable for the separator unit, the purpose of which is to remove all of the pieces of iron that have been captured, letting them fall at a determined point. |
|
DEP Electromagnet Model.
An electromagnet is a device that, when supplied with electrical energy, produces an electromagnetic force capable of attracting and retaining any ferrous metal objects that enter its magnetic field. The electromagnets described here are suspended over a manufacturers of conveyor belt to attract any pieces of ferrous metal that pass under them mixed in with the material to be cleaned.
DRAGO ELECTRONICA electromagnet are manufactured to work uninterruptedly in the toughest weather conditions without their physical or electrical characteristics being affected. |
|
Separation equipment includes magnetic plates, professional grates, and traps, rolls and tubes, drum industrial separators, ferrous traps, magnetic pulleys, magnetic manufacturers of sweepers, non-ferrous eddy current separators, and electromagnetic separators... for removing fine and large tramp iron from various materials, and at the same time protecting machinery.
|
|
| Goudsmit magnetic systems ensure a consistently high product quality and an uninterrupted industrial production process. This is very important with regard to increasing quality demands in (e.g.) the foodstuffs and chemical industry. Magnetic systems also prevent damage to expensive machinery and assure you of a metal free end product |
|
Metal shavings, nuts, pins, nails, can sometimes contaminate the raw material. For this reason, we have created a whole programme of ferric particles detection systems, designed for protecting professional grinders and getting rid of iron particles in manufacturing process. There is a wide variety of applications. The main ones are used in the tinned food sector, ceramics and tiles, chemical industry, mining, the pharmaceutical industry, recycling, etc…
These systems, industrial separators, professional filter bars, drums, etc..., may be produced in different magnet qualities, depending on the degree of ferrous particles chosen. |
|
Metso Minerals (as Sala Maskinfabrik AB, later Sala International AB) has a long tradition in magnetic separation. Already in the end of th 19th century "Sala" built the first manufacturer of magnetic separators.
Metso Minerals LIMS - dry and wet low intensity magnetic industrial separators
Low intensity magnetic separators, LIMS, are designed to recover ferromagnetic materials. The separators are available in designs and sizes to provide solutions for all applications. The heart of each separator is the magnetic system with its unique design, which has a proven record of highest efficiency.
Metso Minerals HGMS - high gradient magnetic separators
High gradient magnetic separators available in cyclic design with process vessel diameters from 220 mm to 3 050 mm and in continuous design with matrix ring mean diameters 1 200 mm, 1 850 mm, 2 500 mm and 3 500 mm.
We are the OEM (original equipment manufacturer) for equipment manufactured under the following brand names, and is the only supplier of parts with the original drawings and design details for:
Metso Minerals, Denver, Svedala, Sala Maskinfabrik and Sala International LIMS and HGMS |
|
|
|
Metal detectors, Magnetic separators
