|
|
- Ideal for shipping and/or receiving operations with a high rate requirement.
- Can accomplish rates up to 60 cartons per minute when used with sortation belt conveyor running up to 450 feet per minute.*
- Handles a wide variety of conveyables up 75 lbs., depending on system sort rate and design.
- Gentle controlled sweeping action diverts conveyables at a 45° angle onto powered or non-powered takeaway conveyor.
- Air-operated arm can be controlled manually or remotely
- Designed to be used with Automotion's standard belt conveyor or live roller divert conveyor.
- Best results accomplished when paired with an Automotion high speed induction conveyor.
|
|
The Model ProSort SC series of sorters are belt driven sortation conveyors. The belt concept provides a reliable method of tracking packages to the divert stations. Take-away spurs may be skatewheel type or powered type slaved from the main sorter.
- Overall Widths: 18" single side only - 24", 30" & 36" single or double sided
- Bed-Roller bed with 1.9" dia. x 16 ga. rollers with ABEC-1 bearings spaced every 6". Mounted in 6-1/2" deep x 12 ga. powder painted formed steel channel frame
- High performance center drive with shaft-mounted gearmotor and variable speed controller, horsepower based on speed and length
- Belt Speed-Determined by application requirements, 300 FPM maximum
- Right hand, Left hand or Two-Sided diverts available
- Adjustable Floor Supports Available
|
|
Multi directionnel transfer system X-RAILS
This system transfers the products without stopping.
The products can be oriented during the transfer. The angle of the transfer is adjustable from 0° to 90° to the right or left.
This system is for flat based products, e.g. cartons tray etc.
The maximum weight for the products is 100 Kg for a size of 600 x 600 mm.
Depending on the sizes of the products, there are two ranges of X-RAILS :
- L : for the larger products
- S : for the smaller (smaller roller pitch).
- PRODUCT TRANSFER WITHOUT STOPPING
- MAXIMUM SPEED 2 METERS PER SECOND
- EASY TO CONTROL AND COMPACT
- TRANSFER ANGLES ARE ADJUSTABLE FROM 0° TO 90° TO THE RIGHT OR THE LEFT
- PRODUCT DIMENSIONS : FROM 250 x 250 A 600 x 600 MM - MAXIMUM WEIGHT : 100 KG
|
|
MODEL RBT3
3-STRAND 90° ROUND BELT TRANSFER
Model
RBT3 provides an excellent method of transferring up to 100# product at
90° intervals. And, no drive is necessary when mounted into Roach line shaft driven conveyor. Each unit shown mounted in optional line shaft driven conveyor. Model at right includes optional frame cut-outs and blue paint.
NOTE: Specify twist (clockwise or counter clockwise) for drive bands on line shaft conveyor (model LS or LSA) that transfer mounts in. Consult factory.
|
|
- Ideal for shipping and/or receiving operations with a high rate requirement and numerous divert locations are required.
- Can accomplish rates up to 90 cartons per minute when used with sortation belt conveyor running at 180 - 300 feet per minute.*
- Handles a wide variety of conveyables up 75 lbs., depending on system sort rate and design.
- (3) rows of wheels lift the carton onto a 45° powered or non-powered takeaway conveyor.
- Modular construction allows for many design possibilities, such as unlimited sorter lengths and countless divert configurations. The assembly is also easier to maintain.
- Designed to be used with Automotion's standard belt conveyor.
|
|
|
Positioned just below the highest throughput sortation applications is HK Systems’ family of medium rate sorters. This group comprised of the High Speed Wheel, Steerable Wheel, and the Modular Plastic Belt sorters address customer applications where the case rates are traveling at or below 300 feet per minute. Each of these sorters is specifically designed to handle mid-level production needs while delivering the reliability, durability, and affordability required in today’s distribution environment. Sorter selection among these alternatives is based on product characteristics such as size, weight, and the features of the conveyor contact surface. Each design is modular permitting quicker and easier initial installations and future field modifications. The Modular Plastic Belt sorter allows for zero spacing between divert lanes and can handles products ranging from envelopes to cases.
|
|
The Model ProSort SRT is a sorter for small to medium sized items. Product is transported on multiple narrow belts. Rollers pop up between the belts to transfer items at right angles to the sorter.
- Right Angle Transfer
- Two-Sided Transfer
- High Sort Rates
- Close Transfer Locations
- Flexible Sort Locations
|
|
Specification
TRANSFER ARM: 7 ga. formed channel.
TRANSFER WHEELS: Frantz model 35Z on 3" wheel centers. Wheels are rated
at 50 lbs. capacity each.
STANDARD LENGTHS: 2', 3', 4', and 5'.
STRAND CENTERS: 18"
LIFT: Positive type lift with 1" of net lift.
BEARINGS: Heavy duty, lubricated, ball bearing unit with cast iron housings.
MOUNTING: Integral part of unit, with 15" top of wheel elevation (down
position). Unit designed to mount between conveyor frames
CAPACITY: Unit load not to exceed 500 lbs.
|
|
|
The FKI Logistex sorter line includes sliding shoe, tilt-tray, double-tray, and cross-belt sorters designed to enable high-speed, accurate throughput for a wide variety of package weights and sizes.
|
|
This system sorts individual materials to a designated place according to its own information specified by the bar-code or RFID attached to them by automatically distributing and collecting with the conveyor and sorter.
Those products are used for : Baggage Handling System ; Automated Postal Processing System and Logistics Processing System.
|
|
Features
High-speed, accurate sorting
Gentle sorting with little shock
Diverse cargo
Can use many sorting compartments
Specifications
Sorting system Pop-up system
Sorting capacity 5000 cases/h (varies depending on conditions like: cargo length and conveyor speed etc. )
Speed 36 46 61 76 91 100 m/min
Length MAX 100 m
Frame width 500 550 630 700 800 mm
Sorting direction Single-sided sorting
Cargo Carton cases, bottles, poly cases
Cargo dimensions 150 - 800(W) X 230 - 800(L) X MIN.30(H) mm
Cargo weight 1 - 30 kg/piece
|
|
Automotion's AutoSort 02 is a pusher sorter, that diverts product from the sortation conveyor onto a take-away conveyor by extending the diverter when the product passes in front of it. It can transfer to a conveyor that is parallel or perpendicular, which makes it a good option when linear space is limited.
- Ideal for shipping and/or receiving operations with a medium rate requirement and where linear space is limited.
- Can accomplish rates up to 40 cartons per minute when used with sortation belt conveyor running up to 250 feet per minute.*
- Handles a wide variety of conveyables up 75 lbs., depending on system sort rate and design.
- Diverts 90° onto a parallel or perpendicular, powered or non-powered takeaway conveyor.
- Air-operated arm can be controlled manually or remotely
- Designed to be used with Automotion's standard belt conveyor or live roller divert conveyor.
- Best results accomplished when paired with an Automotion high speed induction conveyor.
|
|
TapTone High Speed rejectors provide reliable rejection of up to 2000 containers per minute and are available with a fixed stroke length of 0.5 or 1.0 in (1.2 cm or 2.5 cm). Designed for tight production spaces, these systems can be conveyor or floor mounted, and withstand water wash down.
How it Works - When a reject signal is received, a solenoid is actuated, allowing air to extend the ram, which pushes the faulty container off of the production line. The length of time the ram is exteded is a function of the duration of the reject signal. When the signal ceases, the ram and its cylinder return to their home or retracted position.
Features
- High Speed Rejection fo Glass, Plastic or Metal Containers
- Conveyor or Floor Stand Mounting
- Minimal Space Requirement Enables Adaptation to Almost Any Production Line
- Requires Only One 24 VDC Reject Signal
- No External Power Required
|
|
The CASI SortMaster™ 110 is a pusher sorter designed for light boxes under 25 lb. at low to medium rates. The system is easy to install and mount and operates seamlessly with our TransMaster™ conveyor and in-motion checkweighers.
SortMaster™ 110 can handle up to 60 items per minute. SortMaster™ 110 pushes most small to medium sized products onto chutes that are 90 degrees from the sort conveyor. With any sorter, the parts per minute rate depends upon the item lengths, weights, conveyor speed, and required gap.
|
|
Roach High Speed Sorters were designed in response to an increasing demand for high speed distribution equipment.
35 sorts per minute can be economically and accurately sorted with model HSS2.
|
|
Automotion offers (2) types of Sliding Shoe Sorters: the AutoSort 12 and the redesigned AutoSort 13. Each shoe sorter is specifically designed to perform in the most demanding, high volume sortation environments. Both have an advanced integrated tracking system that allows the sorter to accurately divert product even when running at high speeds.
- Ideal for shipping and/or receiving operations with a high rate, high volume requirement.
- Can accomplish rates up to 250 cartons per minute* at speeds up to 550 ft. per minute
- Intergrated advanced tracking system communicates the timing and amount of shoes needed to accurately divert product onto a take-away conveyor.
- Available in single or dual-sided configurations.
- AutoSort 13 features a shoe design of extruded aluminum and sound insulation and an electric divert switch instead of the standard pneumatic switch to enable the sorter to achieve even higher sortation rates.
|
|
Slide Belt Sorter in general
The Eurosort SBS comes in two configurations being the PU = push up version and the PD = pull down version. The Slide Belt Sorter is an effective and tested solution within its specific field of application. Generally speaking, this type of sorter is used for the automatic sorting of relatively square and stiff items. Usually, these items are able to slide of a belt.
The items to be sorted are fed on to the sorter-conveyor in either the conventional way by another conveyor or from the side under a 90 degrees angle. The products are detected on length and are given a destination. Once the product is positioned beside the right destination parts of the belt lifts up or goes down and the product will be free to slide of. The products are then dropped directly into a carton or into a chute, a roller conveyor / container etc. This sorter has very few moving parts which means low maintenance and low costs.
|
|
Natrix is the latest generation of sliding shoe sorter from TGW, providing high performance sortation of goods with very different dimensions into multiple discharge lanes on both sides of the machine. It is capable of delivering up to 10,200 cartons or totes (400 x 400 mm/16" x 16") per hour each weighing up to 50 kg (110 lbs).
The products are conveyed on a sorter bed consisting of extruded aluminium profiles. Shoes slide across these profiles, diverting products to pre-selected destinations. Different types of discharge lane are available, e.g. driven roller conveyors, non-driven roller conveyors or gravity chutes.
Modular in design for easy assembly and reconfiguration, Natrix is a high performance quiet, low maintenance sortation system.
|
|
|
FKI Logistex is the industry leader in automated, high-speed, high-throughput sortation solutions, capable of handling the highest volumes in the industry. With more than 100 years of experience and thousands of installations worldwide, FKI Logistex sortation equipment, software, and controls are critical components of today’s most sophisticated and highest-throughput automated material handling systems.
|
|
Uni Sorter
Features
- High-capacity sorting
- Gentle and reliable sorting
- Highly diverse cargo
- Energy-saving operation
- Simple maintenance
|
|
Vibrating sorting machine
Scope of use
Screening of powdered or cut products, including: nuts, coffee, dried fruit and vegetables, mushrooms, etc.
Operation principle
The machine sorts products using sieves of different mesh size.
Vibrating, diagonal sieves separate the product into 3¸ 5 fractions.
Dimensions and weight dependent on the size in the series of types.
Output 200; 500; 1000 kg/ h
|
|
|
Capable of impressive sorting performance in a modest footprint, Optyx® is the state of the art for automated on-belt inspection with both color camera and camera-plus-laser power. It enables processors to detect and eject both unacceptable product and foreign material.
|
|
In a class of its own – SECKLER sortero.
Automatic classification machine for all types of sorting.
The demand for automatic classification machines has been rising for years. There are many different reasons for this, all arising from the technical development of various production processes. Examples include hardcoat anodising of items that cannot undergo secondary machining, or centerless grinding. The need for high productivity and rapid mass production represents a market trend that will make automatic classification machines even more necessary in the future.
Exact sorting to micro precision
High productivity, operating 24 hours a day, 7 days a week...
100% inspection and reliability – parts cannot be mixed up
Fast retooling for similar parts
High availability of systems
Tailored, customer-oriented solutions
Highly economical systems – rapid ROI
Technological details handled in the strictest confidence
CE marked and ISO 9001 certified
|
|
Bulk-to-bulk sorting HCTS2000 MK2
The HCTS2000 MK2 is designed for sorting closed primary sample tubes used in medical laboratories using information in the barcode or through queries to the LIS. The sorter helps optimize the work flow in the entrance area of the laboratory or in Hematology department by freeing up laboratory personnel so they can concentrate on other tasks.
Performance
- Speed: Up to 2,000 tubes / hr
- Sorting: 7 target bins, more with Extension Module
- Operation: Stand alone or connected to LIS
- Barcodes: Any barcode up to 30 digits
- Registration: Early registration when connected to LIS, improved TAT tracking
|
|
Advantages :
10 sorting classes adjustable to customer requirements
Automatic elimination of dust and scrap
Mobile and easy to tow allowing the use on several grinding units
Efficient machine working on a continuous basis without manual action
Precise separation
Light and compact machine using retractable sorting rollers
Principle :
Introduction of the material into a large hopper
Gravity feed into a variable speed rotary screen
The rotating screen is partitioned into 5 receiving spouts which eliminate dusts, steel scraps, sort small balls from 12 to 40 mm diameter grain size
The large size balls (over 40 mm) are then automatically sorted in 6 different classes using 2 divergent rollers rotating in opposite direction and at different speeds
At the same time, the remaining broken grinding balls are eliminated in a specific spout
|
|
|
|
|
|
The flexibility of the systems of sorting and forwarding of IF SCHAEFER PEEM in fact of the systems adapted to the preparation of orders by batches and the distribution of the orders as to the convoying of the parcels and containers.
The very fast preparation of the orders and the deliveries as well as the sorting of the deliveries directed customers before the preparation in the systems of forwarding make it possible to improve considerably quality of the deliveries.
- The modular evolutionarity of these systems enables them to be integrated in any of the existing systems of convoying.
- It is possible to configure speeds of convoying and sorting different thanks to the control systems from the engine by frequencies.
- Monitoring centralized and uninterrupted of the orders of the entry in the system with forwarding, thanks to a permanent follow-up of each stage of the process.
- Optimal exploitation of space, thanks to presorting and to a reduced temporary storage.
- Obligations of satisfactory maintenance, because of use of materials not very sensitive to the phenomenon of wear.
- Respectful Work methods of the environment, thanks to a use of the devices adapted according to the needs.
Zones produced
- Control systems of the containers and the paperboards worm sorting or temporary storage.
- Standard Sorter for the preparation of the orders (according to the turns of delivery or the customers).
- System pusher at high-speed towards the sort control field of the products or the parcels.
- Plug of reserve for the preparation of the orders.
- Sorter for small parcels for the preparation of orders of small parts and light goods or small size.
- Sorters for video/audio products, e.g. for the individual treatment of products (stacking, labelling or packing).
|
|
SORTING SYSTEM
For all type of finished products (framework or pallets).
* The automatic hydraulic fork device follow the load and allow boxe distance opening.
* Up to 60 boxes.
|
|
|
The sortation system is the focal point around which the distribution center revolves. By way of the sorter, a company’s saleable goods are transported to the marketplace. The proper timeliness and absolute accuracy of the shipments are without compromise. Therefore, it is understandable that the selection and application of the appropriate and reliable sortation system is one of the chief concerns facing today’s distribution decision-makers.
|
|
* Small items such as blister cards, flats, and media can easily be diverted with this air sorter at 60 products per minute.
* 24 Volt DC bi-directional sorter that offers a low cost, high value solution for low rate sortation.
* The CASI SortMaster 110 is a pusher sorter designed for light boxes under 25 lb. with rates up to 60 products per minute.
* Bi-directional sweep sorter for applications up to 30 products per minute.
* The 120 HD is a heavy duty Bi-Directional overhead pusher sorter designed for case sortation.
* The CASI SortMaster 125 is a light duty Bi-Directional overhead sorter designed as a low cost option to UBT's in pick module diversion.
* Speeds up to 300 feet per minute and achieves a sort rate of 120 products per minute.
* Delivers up to 150 sorts per minute (18" product). Capable of diverting both left and right.
* ERS diverts products at 90 degrees, at rates up to 40 cartons per minute.
|
|
Ringsorter
The EuroSort Ringsorter is specialy designed when the number of destinations is limited. This sorter is ideal for libraries where high speed and large numbers of destinations are not needed.
The ringsorter has the following specifications:
Tray Type: Tilt and Split
Carrier Type: Single and Twin
Max Product Weight: 8 kg
Max Product Size: 350x350x200
Capacity: 3.600 tr/hrand higher
Max. Destinations: 20
|
|
|
|
Sorting systems, Sorters, Diverters, Mergers...
