|
|
AGITATING HOPPERS FOR CONCRETE
These apparatus are designed to store, stir and distribute concrete. They comprise a special tank lifting line causing at the same time an important offsetting of emptying point with regard to chassis front. The tank upper part is closed with two loading professional grates. The trap is hydraulically controlled. |
|
Bespoke 'T' & 'B' Block Systems for Rapid Tool
Change. Roll on - Roll off facility dramatically reduces
tool changeover times.
Advantages:
Roll on - Roll off facility:
- Dramatically reduces tool changeover times.
- Eliminates tool and professional press bed damage.
- Allows accurate tool positioning.
The Omnitrack 'T' & 'B' Block systems are designed to facilitate
rapid tool change on any type of press / machine.
The standard format consists of housed spring-loaded Ball Units
which are inserted into the tenon slots of the press. When in the
raised position, the balls protrude above the bed level allowing
the tool to be rolled onto the bed and positioned accurately.
When clamping is carried out the balls retract, lowering the tool
onto the press bed. When clamping is released the balls lift the
tool, allowing it to be rolled from the press.
Standard slot dimensions for 'T' & 'B' bars are shown. We also
manufacture these systems for non-standard slots. Ball pitch,
deflection, load and clamping are application specific. Contact
us for a bespoke solution. |
|
* type LBR uses mechanical, type LBH hydraulic lifting
* professional balls allow movements at any angle
* moderate rolling friction
* especially useful for dies that have to be accurately positioned by hand
|
|
Ball screw jack.
Stainless Steel execution available.
Capacities from 1 Ton to 30 Ton.
Stroke on request.
Body with Base or Pivoting feature.
Upright or Inverted Screw.
Translating or Rotating Screw.
Motor applications. |
|
Metric and Imperial Ball screw jacks designs in translating and rotating screw formats in upright or inverted types are available in capacities up to 500kN ( 50 Ton). 2 gear ratios and 2 screw leads as standard, Options include Pre-loaded ball nut, Anti-rotation (keyed), 6 mounting options including trunnion and double clevis.
The Metric Ball Manufacturer of screw jacks have the extra advantage of an integral safety system as standard. |
|
Joyce/Dayton - Established 1873
Joyce Ball screw jacks feature a ball nut with integral ball bearings that recirculate along the surface of the manufacturer of ball screw. The significantly reduced friction between the ball nut and screw results in greater efficiency, with up to 2/3 less input torque required to move the load than a similarly rated machine screw jack.
Compared to Machine Screw jacks, Joyce Ball Screw Jacks
- Require less motor horsepower
- Allow higher travel speed
- Provide an extended duty cycle
Joyce Ball Screw Jacks are available in translating screw or rotating screw (keyed for traveling nut) designs. Translating screws are available with threaded, load pad, clevis or plain ends. Options include limit switches manufacturers, professional encoders, geared potentiometers, direct drive and reducer mounts, and protective professional boots. Joyce Ball Screw Jacks are ideal for single or multiple jack systems.
Unlike Machine Screw Jacks, Ball Screw Jacks are not self-locking. Because they will lower under load, a braking motor or other external braking mechanism is required.
|
|
Joyce/Dayton - Established 1873
Joyce Bevel Gear screw jacks offer higher efficiency and greater speed than other mechanical screw jacks. At the same time, Bevel Gear S Series jacks still provide the benefit of a self-locking screw-no special brake is required to prevent the jack from lowering under load. Spiral bevel pinions increase strength for higher capacities.
Bevel Gear screw jacks also act as a miter gear box, making them an ideal choice for many multi-jack systems. As many as three output shafts may be specified for mounting motors, limit switches suppliers, readout devices and other accessories.
Bevel Gear screw jacks are also available complete with reducer or direct drive in a ready-to-run package.
Joyce bevel gear jacks come in translating screw (shown) and rotating screw (keyed for traveling nut) designs. Jacks are available with one of four standard screw ends or special ends to meet your requirements.
|
|
Big Professional bag with apron on top and sealed base
Big Bag, high tenacity layered Polypropylene with 4 hoisting loops, with apron on top and ssealed base.
Size: 90 x 90 x 110 cm
SWL 1000 kg; SW 5:1.
Big Bag with run-in and run-out channel
Big Bag, high tenacity layered Polypropylene with 4 hoisting loops, with run-in and run-out channel, 35 x 50 cm.
Size 90 x 90 x 110 cm
SWL 1000 kg; SF 5:1 |
|
The TCA-DE is a front line fully automatic split wheel bin lift with the following key features;
- Efficiency, fast automatic cycle time of 8 sec. plus dwell time, which can be adjusted between 0,5-3 seconds.
- Trade containers, at the turn of a switch the TCA-DE can be changed over into manual 'trade' mode to lift the full range of four wheeled containers including Paladin bins fitted with conversion bars, cycle time manual trade 13 sec.
- Low weight, the TCA-DE weighs only 695 kg.
- Safety, the unique Terberg geometry means that containers do not kick back towards operators as they are lifted, enabling that the safety arms whilst conforming to EN1501.1 to be user friendly and unobtrusive.
- Practical operation, exceptional ground clearance coupled with automatic reverse raise means that the TCA-DE is an invulnerable to damage as it is possible to be.
- Automatic Shaker, an adjustable automatic bin shaker allows 'sticky' materials suchs as grass cuttings to be handled with ease.
- Packing Cycle Delay Control, to take full advantage of the high mounting height and subsequent increase professional hopper volume, the TCA-DE can be pre set to cycle after a set number of bin lift cycles.
- Diagnostics, a text display is mounted in a durable box on the side of each bin lift to provide simple fault diagnosis in order to minimise down time.
|
|
Widely used in bridge, professional tank and structural steel work, ship building and other industry where powerful, all-position mechanical jacks are required.
|
|
Double E professional carbon fiber expanding shafts are lightweight alternatives to heavy steel or aluminum shafts. These shafts provide the following benefits:
Carbon fiber housing provides the strength of steel at a fraction of the weight.
Housing sleeved in metal to protect against abrasion.
Special corded polyprene bladder expands with air to grip core ID. Robust bladder material reduces bladder failure and minimizes maintenance.
Deep journal insertion and a close tolerance fit ensure easy access when necessary.
Comprehensive two year warranty even includes bladder. |
|
| Car body industrial hoist, admissible load 8 t / 7 t (BGV D8) and car body jack, admissible load 8 t / 5 t (VBG 14) for workshops: - low speed and high speed gear for quick and easy lifting - self-locking manufacturers of spindle for highest security - double safety nut (VBG 14) allows working under jacked-up load - big and solid ground plate for safe standing - adjustable claws (4 postions) for time saving height adjustment - rubber tyres for quick and easy use |
|
The jewel in the crown of the Gohin Messain range, this coil lifter guarantees a very high level of safety. It is noted for its great
flexibility of operation, its robustness and the way it optimises storage space in order to meet your productivity requirements.
Safety is absolute as a result of the OCS system which prevents accidental opening of the lifter while loaded.
The variety of options available make this a reliable, progressive, cost-effective tool that can also be fully automated.
|
|
Lifting tongs for steel products
The Slingofer hoisting tongs handle any kind of hot and cold steel products, be it ingots from the continuous casting or finished steel coils from the warehouse. Other models are dedicated to the handling of equipments in a steel production plant, such as rolls, electrodes, pallets etc.
Lifting tongs for coils
- Motorized coil lifter
- Electro-hydraulic coil lifter
- Automatic mechanical tong for vertical coils
Coil tilters
- Motorized coil tilter
- Coil tilting tong
Lifting tongs for any application in the steel industry
- C hook for the lifting of coils |
|
Located in the north of France, SP2i is specialize in the design and the manufacture of lifting and handling tools for all type of heavy loads.
Today, our experience and know-how in this field, allow us to offer you a large range of tongs adapted to your needs and to your working environment, in the respect of the standards and regulations in force, as well as your own requirements.
Even if the iron and steel sector is our main customer, we also work with the car industry, the railway industry and paper mills … too.
Our tongs are robust, reliable, and a great handiness.
A lot of options are available to satisfy your requests.
In horizontal or vertical Axis
Several versions : Mechanical, Electromechanical, Electrohydraulic
Alternatives : C-hook… Lifting beams …
Types of loads :
- Rolls Mills,
- Flat products,
- Ingots, Slabs …
- Professional press Tools.
- Professional bars or pipes bundles …
- … |
|
LONGITUDINAL ELECTRO LIFTING MAGNETS SUPPLIERS
These magnets are used to lift bundles of material with an irregular surface, which complicates lifting operations. Longitudinal magnets, however, have a particularly deep penetration field that makes them unsusceptible to such irregularities. This enable safe and effortless transport of bundles of material. Moreover, two or more of these magnets can be used, depending on the length of the bundles. In the event that people are present in the lifting area, however, extra mechanical industrial slings must be fitted for safety purposes.
|
|
RD modules for rounds:
Permanent-electro magnetic modules for rounds handling.
The special shape allows to easily suppliers of clamp loads with curve surfaces.
CO / CV modules for coils handling:
Permanent-electro magnetic modules for coils handling, even in vertical or horizontal eye.
Special equipments for full-automatic lines.
|
|
Manufacturer of electromagnets, Lifting magnets
The Lenoir Magnetic Systems lifting magnets handle any kind of hot or cold steel products. Hot items from the production plant, finished steel coils from the warehouse, scrap from the recycling unit etc. By their sturdy design and conception these equipments are perfectly suited to harsh environments.
Rectangular electromagnets
Applications: handling of steel sheets from 0.5 up to 200 mm, individual items, small and large sized.
Available in bipolar version with deep field: handling of billets, horizontal or vertical coils, bundled items, profiles, wire, rails etc.
Available in high-temperature version: handling of hot products (up to 600°C) |
|
Electropermanent magnets utilize permanent magnetic material surrounded by an electrically powered coil. To energize an electropermanent magnet, a momentary pulse of D. C. power is applied to the magnet's coil in order to charge the permanent magnetic material within. Once energized, the electropermanent magnet does not require a constant source of power to retain the lifted steel coil. To release the steel coil, a reverse pulse of D. C. power is applied to the magnet's coil. The Electropermanent magnet design tends to excel when the steel coil's edge stagger is kept to a minimum.
Special Adaptations (Standard Circular, Rectangular, and Bi-Polar)
Able to prevent "telescoping"
Less storage space required
Transport requires less manpower |
|
On request we study, design and carry out specific préhenseurs adapted to the handled product and the user.
Example of handled products:
- Glazing, Panel of wood.
- Barrels.
- Reels.
- Paperboards.
- Castings.
- Bags.
- automobile Parts (limps speed, coils, doors, cap, seats, panel instrument...)
Turnkey installation.
|
|
CON-BOB-10MU
Container you carry out coils: movimentabile with professional crane', undercarriage professional elevator or transpallet; accatastabile till four plans (with development possibility); loading coils, till max diameter 1000 with crane' or undercarriage elevator; transportable on truck (pianale min. larg. 2000 milimeter) in two rows to two plans. |
|
Located in the north of France, SP2i is specialize in the design and the manufacture of lifting and handling tools for all type of heavy loads.
Today, our experience and know-how in this field, allow us to offer you a large range of tongs adapted to your needs and to your working environment, in the respect of the standards and regulations in force, as well as your own requirements.
Even if the iron and steel sector is our main customer, we also work with the car industry, the railway industry and paper mills … too.
Our tongs are robust, reliable, and a great handiness.
A lot of options are available to satisfy your requests.
Horizontal grasp
Several Versions : mechanical, Electromechanical, Electrohydraulic
Types of loads :
- Coils,
- Flat products,
- Ingots, Slabs …
- Professional press Tools.
- Professional bars or pipes bundles …
- … |
|
- The cell is manufactured in aluminium alloy with HT steel bushes.
- The cell incorporates an eight gauge bridge together with
associated electronics and a 9 volt PP3 non-rechargeable battery.
- Built into the suppliers of load cell is a large [20mm] 3.5 digit liquid industrial crystal
display mounted on the front of the cell for easy reading from
the operator's position.
- The load cell is self contained and has no external cabling.
- A battery professional switch is provided on the rear of the cell to prolong
battery life when the cell is out of use.
- All set up and calibration data is retained when switched off.
- The cell is automatically switched off after 15 minutes to
prolong battery life.
- Battery life - typically 50 hours. |
|
Warning: Models HTS with Max >= 3.000 kg only available on pallet
10 tare memory units, 10 unassigned memory units, e.g. for weight increments or identification numbers, summation storage, adds up all individual weighing processes (TOTAL)
Charge condition indicator for rechargeable cell, visual by means of LED
Adjustment program CAL. External test weights available at an additional price
Rechargeable battery pack internal, standard. Operating time approx. 150 h, charging time approx. 15 h. Models until incl. Max = 1.500 kg internal, through mains adapter, For models from Max = 3.000 kg external. Batteries can be reordered at any time
Luminescent Light emitting diode display. The intensity can be adjusted in 2 stages to preserve the battery. Models with Max until 1.500 kg incl., digit height 25 mm, with Max from 3.000 kg, digit height 30 mm
Infrared professional remote control standard. Range approx. 15 m. All functions are selectable. Input via numeric key pad, incl. protective case WxDxH 200x80x28 mm, batteries Size AA (2 x 1,5 V) included
Hook with safety catch, revolving
Standby function. Automatic switch-off of the display after 5 min without a change of load. Reactivation of unit with the touch of a key |
|
Around the world, cranes are used to load ships, vehicles and containers. Casting and charging cranes handle material flows in foundries and steelworks. These materials must be frequently, reliably and accurately weighed, and without any delay.
Schenck Process supplies the perfect solution: electromechanical crane weigher systems for all required classes of accuracy, customised for specific projects and applications, from systematically planned standard solutions through to customised design. |
|
Chatillon crane scales and dynamometers deliver optimum performance for weighing tension, traction and weight. We offer mechanical and digital readout professional scales that are ideal for industrial applications, warehouses, shipyards, terminals, etc.
|
|
|
|
Special handling and lifting tools
