2-jaw grippers

Grip strength: 94, 62, 76, 107 N
Stroke : 6 mm

The Series CSSP pneumatic gripper provides an innovative solution for cobots used in industrial process applications such as machine tool tending, end-of-line packaging, and assembly. Its lightweight and compact design ...

Grip strength: 5.25 N - 292 N

Double acting, magnetic, self centering Sizes: 10, 16, 20, 25, 32 Series CGAN angular grippers are available in 5 different sizes. Thanks to an opening angle of between -10° and 30°, the Series CGAN ...

Grip strength: 37 N - 413 N
Stroke : 2.5 mm - 10 mm

... once positioned on the body and/or on the jaws, are able to guarantee, during maintenance, a high interchangeability of the gripper and of the extensions. Type of construction - Self-centering parallel ...

• Double acting with optional springs (on closing or on opening). • Long stroke or short stroke. • Possibility of front fastening with through screws. • High efficiency transmission system. • Magnetic sensors or optional inductive ...

Grip strength: 36 N - 2,400 N
Stroke : 1.2 mm - 20.5 mm

• Double-acting drive. • The rugged construction lends itself to heavy duty applications for a trouble free long life without maintenance. • Wide choice of stroke length and gripping force options. • The gripping force is constant ...

Grip strength: 18 N - 700 N
Stroke : 2.3 mm - 15 mm

• Double-acting drive. • Backlash adjusting system. • Maintenance-free long life and reliability. • Various options for fastening. • Optional magnetic sensors. • Also available with spring closed (-NC) or spring open (-NO). • FDA-H1 ...

Grip strength: 70, 170 N
Stroke : 5 mm

• Dual-acting parallel gripper for internal and external clamping. • Anodized aluminium alloy body and tempered steel jaws. • Bottom or side fixing. • All sizes come with magnets and sensor slots Quantity ...

Grip strength: 170, 70 N
Stroke : 5 mm

Dual-acting grippers with parallel jaws and internal and external clamping. The body is made of anodized aluminium alloy and the jaws are made of hardened steel. All sizes are equipped ...

Grip strength: 135, 100, 45 N
Stroke : 5, 4, 7 mm

Double-acting system with clamping in both directions. All the grippers come with magnet and sensor slots. Quantity per package: 0 Minimum order quantity: 0 Unit of measure: items Actuators: Handling bore (mm): ...

Pneumatic grippers from the 6300 series are typically used in complex systems such as assembly machines, robots, manipulators etc. This series covers the wide range requirements of this sector, allowing a variety of applications.

Pneumatic grippers from the 6300 series are typically used in complex systems such as assembly machines, robots, manipulators etc. This series covers the wide range requirements of this sector, allowing a variety of applications.

... scope-free base jaw guidance - Drive concept oval piston for maximum gripping forces - Base jaws guided on double roller bearings ensuring low friction and smoothly running - ...

Grip strength: 123 N - 21,150 N
Stroke : 2 mm - 45 mm

Description Universal 2-finger parallel gripper with a high gripping force and high maximum moments due to the use of a multi-tooth guidance Field of application Optimal standard solution for many ...

Grip strength: 180 N - 8,750 N
Stroke : 2 µm - 25 µm

Description Universal 2-finger parallel gripper with permanent lubrication, high gripping force, and high maximum moments due to the use of a multi-tooth guidance. Field of application Pneumatic ...

Grip strength: 27 N - 508 N
Stroke : 20 mm - 200 mm

• High torque resistance due to guided gripper jaw • Compact and sturdy design • Ideal for gripping larger parts • Double-acting piston actuator • Suitable for external and internal gripping • Mounting: ...

Grip strength: 10.4 N - 777.2 N
Stroke : 2 mm - 15 mm

... guide • High gripping force with compact size • Max. repetition accuracy • Can be used as a double-acting or single-acting gripper • Single-acting variant or with gripping force securing normally open (NO) or normally ...

Stroke : 10 mm - 25 mm

Pneumatic angular grippers offered by Airwork, are the right solution for simple handling applications. They have a very compact design which reduce as much as possible their overall dimensions. They can be used for ...

Stroke : 10 mm - 25 mm

Angular grippers with 180° opening are the ideal solution to limited space requirements and to the necessity to have fully retractable jaws, avoiding the impact with other machine’s components. This ...

Grip strength: 33 N - 45 N
Stroke : 20 mm - 160 mm

Grippers of PH Series are used to move big components and thanks to the possibility to choose between three different strokes for each size, it’s possible to cover several areas of application. The opening and closing ...

... design means that jaw faces can be adjusted to accommodate different specimen thicknesses, this ensures that the line of tensile force remains concentric with the grip body. They can be equipped with a selection of interchangeable ...

... capacity for dynamic tests, and up to 600 kN for static tests. Ideal for metals and composites testing, the interchangeable grip jaw faces accommodate both flat and round specimens and the grip design maintains a constant ...

Grip strength: 25, 100 kN

... requires 8000-049 attachment kit if load cell is fitted to actuator Requires: Jaw faces (select from 2703-801 to 804 as required) and 207 Bar (3000psi) grip controller Quantity: 2 grips

With this small auxiliary tool you easily pull the geomembrane into its position. No slipping any longer with your hand. This tool claws very powerful into the geomembrane. Easy usage Automatic material clamping via springs

Grip strength: 60, 115, 200, 340 N
Stroke : 4.5, 6, 8, 10 mm

... changing jaws with Type 25 parallel long stroke grippers. Reliability and robustness of Type 24 parallel grippers With a hard anodized body and cylinder, prismatic steel guide, fully ...

Grip strength: 60, 170, 435, 990 N
Stroke : 12 mm - 120 mm

... parallel grippers These pneumatic parallel grippers with long opening stroke can seize parts with very different sizes (example: a range of bearings, a range of wheels …). The length of the sliders ...

Grip strength: 150 N - 920 N

Pneumatic gripper with 2 concentric fingers Finger self-locking closed gripper (toggle joint action) Elastic absorption at opening Options : Inductive sensors Opening screw limitation Fingers ...

Grip strength: 0 N - 10,000 N

... grip deformation when the clamp is being closed. The ratio between the gripping and tensile forces can be individually adjusted, this ensures that the specimen is securely held and maximum tensile force, that is approximated ...

Grip strength: 0 kN - 1 kN

... that are needed to be held. Their gripping force is generated specifically by pneumatic cylinders that act directly on the jaws or through a lever system. A separation of the tensile and the closing forces guarantees ...

Grip strength: 4 kgf - 60 kgf

The PA series angular jaw clamps are used in robotics and the plastics industry and more generally on all types of manipulators. They are particularly recommended for use on injection press unloading robots. Choose ...

Grip strength: 150 N - 10,750 N
Stroke : 5 mm - 70 mm

Robust / 10 sizes Accuracy +/- 0.015mm Adjustable stroke IP rating 40 .... 65 Total stroke control Device to maintenance the gripping force Pressurization Versions up to 130 ° C

Grip strength: 110 N - 5,470 N
Stroke : 2.5 mm - 16 mm

2-finger parallel gripper Protected Rating IP 67 Device to maintenance gripping force Versions up to 130 ° C

Grip strength: 60 N - 5,240 N
Stroke : 6,000 µm

2-finger parallel gripper Excellent stroke / gripping force ratio Gripper from 80gr Stroke from 8 to 42 mm Rating IP 40 Device to maintenance gripping force Pressurization Versions ...

Grip strength: 140 N - 26,050 N
Stroke : 2 mm - 45 mm

... Leakproof and corrosion protected – The universal gripper Suitable for virtually all ambient conditions, with a sealed guide up to IP67 and corrosion protection as standard, you are able to use this gripper ...

Grip strength: 6 N - 400 N
Stroke : 1 mm - 12 mm

... benchmark Optimisation of weight and force reduces your application costs since all components can have a smaller scale • - Gripper jaws up to 50% longer than the benchmark The highest force and torque ...

Grip strength: 8.4 N - 5,250 N
Stroke : 3 mm - 13 mm

"The enduring" • - Proven technology We have more than 20 years of proven reliability, which ensures uninterrupted production for you • - Very short cycle times Low-friction circular guides enable very short cycle times and, therefore, ...

Grip strength: 208 N - 505 N
Stroke : 2, 4 mm

... workpieces with two parallel gripper fingers for handling with robots or portals. • High gripping force with low dead weight and compact design • High torque support for using long gripper fingers ...

Grip strength: 316 N - 932 N
Stroke : 3, 6 mm

... workpieces with two parallel gripper fingers for handling with robots or portals. • High gripping force with low dead weight and compact design • High torque support for using long gripper fingers ...

Grip strength: 470 N - 1,236 N
Stroke : 4, 8 mm

... workpieces with two parallel gripper fingers for handling with robots or portals. • High gripping force with low dead weight and compact design • High torque support for using long gripper fingers ...

This gripper is a gripper for large parts, in this particular case for bagged goods and pallets

Stroke : 28, 33, 38, 25 mm

The GGS type gripper tube for all types of bottles necks comes in the form of 2 inflatable bars equipped with fittings for connection to compressed air and have threaded fasteners. The GGS gripper ...

The GGU Pneumatic grippers The GGU pneumatic gripper tubes consist of 2 sides (4) ref. sketch equipped with 2 inflatable pneumatic parts attached to a spacer (5). It ...

... Wide stroke type enables making an equipment compact. Super light weight with 8mm stroke. About 1/2 of the weight of the conventional grippers of the same class and model. Either the center port ...

... 6mm stroke. (Internal investigation) 10mm width type is the lightest in the industry. A small gripper with secure gripping. Single acting gripper yet can be used either Normally Open or Normally ...

These tools allow for a robust and efficient grasp and manipulation of objects. Pinch grippers are designed to adapt to objects of different sizes and weights, providing a flexible solution for a wide range of industrial ...

This device uses a mechanical/pneumatic expansion principle for traction with 120° jaws and is ideal for handling various objects and components in different industrial settings. Its versatility and adaptability make ...

RUBBER BAG Rubber bag Categories: (De)palletiser, Bottler, Decorator, Glass factory

RUBBER BAG Rubber bag Categories: (De)palletiser, Bottler, Decorator, Glass factory

Grip strength: 10, 15, 23, 31 N

The Morali Vactec Systems has manufactured the MG grippers, suitable for use in the plastic industry, and in various applications in the field of EOAT. These devices are equipped with a very small gripper. ...