|
|
3" LIGHTSTHAPE™ -CYALUME
Cyalume's 3" LightShapes use ChemLight™ technology and come with adhesive on the back - just press, snap and shake. Then stick the Lightshape anywhere and on any material for 180° of illumination that lasts for hours.
3" Lightshape can mark a hazard or the way out
Work hands free
Make illuminated signs with a permanent marker.
NSN approved.
Personnel identification
Medical triage marker
LightShapes are available in red, yellow, orange, blue or green.
|
|
Product: Grid Light Fixture
Mounted: recessed-mounted & surface-mounted
No ballast and start
Lamp: LED T8 Lamps
Model: 1* 8W / 2* 8W
Length: 600mm
Model: 1*15W / 2*15W
Length: 1200mm
|
|
Bulkhead Light Fitting Series 6388:
The innovative layout of lamp-holder and terminals enables Series 6388 light fittings to be mounted without heat-resistant cables and without additional junction box.
For use in Zone 1 and Zone 2
Suitable for incandescent lamps up to 100 W and halogen lamps up to 150 W
Through-wiring possible
LED Cluster Lightings Series 6590:
Flexible and quick installation in Zone 2, Zone 21 and Zone 22
Suitable for stairs, emergency lighting, cabinet lighting or small rooms
Law maintenance cycles due to long service lifetime of LEDs
Bulkhead Light Fitting Series 6788:
For use in Zone 2
Suitable for incandescent lamps up to 100 W and halogen lamps up to 150 W
Through-wiring possible
|
|
Aerodynamic ceiling lights specially studied for Cleanrooms and single-direction Laminar Flow Systems: their reduced width (50 mm) and the special shape of the screen give excellent airflow control with no turbulence.
Teardrop ceiling lights are constructed to permit the creation of rows of lights.
Appliances:
Clean Rooms and Laminar Flow Systems for the microelectronic, electronic, optical, mechanical, aerospace, pharmaceutical, medical industries and hospital.
|
|
SNAPLIGHT - CYALUME
The ideal emergency light on any occasion. Available in many colours and durations as indicated below. Numerous uses and applications in total darkness.
Cyalume's industrial grade 6" SnapLights provide 360° of illumination. They are foil wrapped for light/moisture protection, maintenance free, non-toxic, non-flammable, and waterproof.
Assets
360° illumination
Do no generate sparks or flames
No maintenance/no batteries
Non affected by rain or wind
Waterproof (can be used under water)
Buoyant
Suggested Applications
Marking obstacles
Refuelling/maintenance lights
Traffic control visibility at night
Underwater operations. Scuba diving emergency light
Evacuation lighting (visible even in dense smoke)
Tunnels egress route
Maps reading
Cockpit Light
|
|
Model
BL4201G
Professional Work light
Low Radiated Heat
TC-TEL lamp, 42W
Luminance: 3100lm
High Impact Resistant Casing
IP54
Packing:1pc/box, 6pcs/64x42.5x34.5cm, 1800pcs/1x20'
Available voltages: 110V~240V
|
|
Short description :
Engineered to provide maximum light, Luma-Site Fluorescent Lights were created specifically for the professional. A compact casing ensures the light can be placed in the tightest of spots and a convenient on/off switch guarantees you will have a glare-free light only when you are ready. The ergonomic design means the light will sit comfortable in your hand even after a continued period of time. Should you need to work using both hands, a collapsible swivel hook allows you to hang the light in virtually any direction.
|
|
Model
7201(S)
Professional Work light
Low Radiated Heat
Compact Fluorescent Tube, TC-F 2x36W
Luminance: 5600lm
High Impact Resistant Casing
IP54
Product Size: 33x33x9cm
Packing: 1pc/box, 5pcs/59x35x40cm, 1650pcs/1x20'
Available voltages: 110V~120V, 220~240V, AC/DC:12V/24V/42V
|
|
Model TKY15LT
Application: Isolated places, Road works, Public works, Civil protection, Natural disasters, Representations, Demonstration, Cultural activities, Sports and endless...
We have a reputation in the industry for developing and maintaining the most competitive prices, product availability, and superior knowledge in the industry.
Tide power has been able to satisfy many more of our customer's needs. We focus on the timely processing of your demands and assure you that your order will be duly met. We have instant availability for light towers and will exceed your expectations with the speedy delivery of thereof.
|
|
-Slim casing
-Electronic ballast
-Lamp without/with electrical socket (choice of sockets)
-Magnet fixing (option)
-Energy saving lamp
-Automatic switching
The flat slimline lamp SL 025 with movement sensor is suitable for all types of panels and enclosures, especially where space is at a premium.
The lamp can be mounted on its narrow or broad surface using screws. It is also available with a magnet which allows it to be fitted quickly in any position in a steel enclosure.
Both versions are available with an integrated electrical socket enabling the use of additional appliances.
Approvals: UL File Nr. E 234324
|
|
Custom made EL lamps are the ideal solution for lighting purposes when space is limited. They can be manufactured in almost any size and shape. Multi addressable lit areas are possible. The working principle is a solid state phenomenon that uses phosphors, not heat, to generate light.
The lamps are typically driven by a DC/AC inverter, generating the necessary AC voltage. Special versions are available that can be fed directly from mains (220V/50Hz)
Advantages
•Slim-line electroluminescent flexible foil lamps
•Thin (0.2-0.4 mm), light weight, uniform light source
•Low tooling cost and unit price
•Possible uses: backlighting of facias, keyboards, LCD’s, emergency exit signs, dashboards, control room applications, floor/wall lamps in aircraft and underground passages, …
|
|
LIGHTSTATION
New from Cyalume! Our LightStation™ line provides emergency lighting with 4, 6, 10, or 20 10" SnapLights® that last for 4 hours. When the power goes out the photoluminescent label makes the LightStation™ instantly identifiable in the dark. After opening, users take a SnapLight® to light the area and their way.
The new LightStation™ will offer you in a single product:
Automatic illumination of area and exits
Personal evacuation light for each person
High visibility for each evacuee to arriving rescue teams
The Models 4, 6, and 10 are made of fire and blast resistant steel. When the front cover is opened all SnapLights® activate and can be easily removed for use.
All LightStations™ can be mounted to the wall near exits, fire extinguishers, on trains and buses, or in rooms and hallways that have little or no emergency lighting. Each LightStation™ is sealed with pins that provide a visual alert of use or tampering.
|
|
Series C-LUX 6108 and 6508 compact emergency lighting fitting can be used for safety illumination, but also as information or emergency exit sign lights.
Series EXLUX 6008 and EXLUX 6408 light fittings can be used for safety illumination.
The single-battery-supplied emergency lamps of the ECOLUX 6608 lighting series are employable as safety lighting in accordance EN 60598.
Series 6118 (Zone 1) and 6518 (Zones 2, 21 and 22) compact emergency light fittings in sheet-steel can be used for safety illumination, especially in spraying and painting installations as well as in clean rooms.
Series 6018 (Zone 1) and 6418 (Zones 2, 21 and 22) emergency light fittings in sheet-steel can be used for safety illumination, especially in spraying and painting installations as well as in clean rooms.
|
|
|
Angst+Pfister has concentrated its safety technology program on the theme of "illuminated safety systems", containing a very diversified and high-standing range of products. This comprises: (a) stationary emergency and warning lamps, mobile emergency lamps, monitoring equipment for emergency lamps having a single battery and special lamps for use in potentially explosive environments, and (b) a series of emergency electricity supply systems. This extends from simple centralized emergency battery electricity supply systems to complete plants with microprocessor controlled functional control systems and separate monitoring of individual lamps, without the need for additional data transmission lines.
|
|
Model
A236
Professional Work light
Low Radiated Heat
Compact Fluorescent Tube, PL 2X36W
Luminance: 5500lm
Aluminum Casing
IP54
Packing: 1pc/box, 6pcs/61x55x34.5cm, 1518pcs/1x20'
Available voltages: 110V~120V, 220~240V
|
|
|
|
|
|
Waldmann ESD-luminaires smooth discharge protects valuable components.
Waldmann ESD-luminaires are designed and manufactured using methods that eliminate an electrostatic build-up and controls discharge. Plastics present a significant danger. They are insulators and cannot normally conduct electricity.
The use of special plastics has made it possible to reach the necessary discharge ability for electrostatic charges. It is not recommended to equip the luminaires with any conductive materials, especially metal. An electrostatic build-up is conducted through metal at high speed, and this dramatically increases the risk of a harmful spark discharge.
The grounding of the luminaire components is equally as important as the use of anti-static materials. Without a functional ground, the use of the best materials is ineffective.
All Waldmann ESD-luminaires have been ap-proved by the internationally respected Swedish institution SP. A copy of the certificate is available upon re-quest from Waldmann.
The housing, the magnifier frame and the joints of the Waldmann luminaires are molded from special plastics. All steel and aluminium parts are specially treated to ensure a controlled electrostatic discharge.
|
|
I.S. LED Pocket Torch Lite-Ex LED 30
I.S. LED Pocket Torch Lite-Ex HL 10 & 30 / 50 N
I.S. Torches Lite-Ex 15, 20, 23, 25
I.S. Rubber Cased Torch Lite-Ex HD 10
I.S. Handlamp H-251 A
I.S. Handlamp H-4 DC A
I.S. LED Pocket Torch
I.S. Mini Pocket Torch Lite-Ex LED 8 / Ex-Penlight
|
|
|
|
|
|
Why are Peli Zone 0 & 1 lights the safest in the market?
Peli Products submits its safety torches to the most demanding approval bodies in the world for safety certification to ensure they are completely safe. In Europe, they comply with the most restrictive ATEX Directives. Peli’s catalogue now carries 15 torches considered to be the safest in the market and that are certified to ATEX Zone 1 (Category 2) and Zone 0 (Category 1) standards. With powerful beams of light, anti-static bodies, and adaptable to head, helmet or clothing, you can confidently focus on your job.
With the most restrictive ATEX Certifications, the Peli Zone 0 (Cat.1) & 1 (Cat.2) models have been designed for use in hazardous areas especially in chemical, electrical, gas, oil, power, pharmaceutical, fire rescue, hazmat and other high-risk industries. They allow those who work in hazardous locations to be confident that their light will not cause an explosion when entering these areas.
Little ED™ 3610 Zone 1 Recoil LED™
• LED beam of 32 lumens
• Battery burn-time: 32 hours
• Ergonomic switch that allows easy operation even with gloves on
• Powerful right-angle light
• Stainless steel clip and key ring for hands-free operation
Unconditional Guarantee
All Peli™ products are covered under Peli’s Unconditional Guarantee of Excellence: “You break it, we replace it…forever™”.
|
|
Hand Lamp Series 6141:
For use in Zone 1 and Zone 2, Zone 21 and Zone 22
For alkaline batteries
Can be supplied for use with the following lamps: 2.5 V / 0.3 A, 3.7 V / 0.3 A
Continuous and morse operation possible
Enclosure in plastic, lens in polycarbonate
Hand Lamp Zone 0 Series 6140:
For use in Zone 0, 1 and 2, Zone 20, 21 and 22
Unique mechanism for switching on
Ergonomically formed handlamp
Extrem high luminous intensity
|
|
Intrinsically-Safe LED – Headlamp Lite-Ex KL 10
The Lite-Ex KL 10 is an extremely light and very bright LED headlamp for use in ex-areas. Certified for use in areas classified as zone 1 and 21 in accordance with norm 1999/92/EG (ATEX137).
|
|
|
|
|
|
Petzl, inventor of the headlamp
At night or in dark spaces, it's important to be able to work hands-free. To address those needs, Petzl invented the headlamp in the early 1970s. Since then, Petzl has continuously been the leader of technological innovations, offering headlamps adapted for specific activities.
Our wide range of headlamps addresses a multitude of needs: from the simplest of tasks to technical work in extreme environments.
The Petzl line of headlamps includes:
universal headlamps: multi-purpose, with long-range lighting and long light durations, with little bulk,
special purpose headlamps: heavy duty, powerful and waterproof,
headlamps for hazardous locations: for use in potentially explosive environments,
compact headlamps: lightweight and simple, can be carried anywhere.
All Petzl headlamps are individually tested and guaranteed for three years. They are water resistant for all-weather use. They use high quality bulbs (halogen, krypton, LEDs) and the light beam can be easily aimed. The adjustable elastic headbands give them stability and comfort.
The Petzl difference
1- 2- Lighting power
The quality of the light depends on the light source. The LEDs used by Petzl are chosen from the highest quality LEDs available.
Grouping several LEDs in the same housing or using a high output LED allows the headlamp to project a powerful light beam.
3- The Wide Angle lens enlarges the beam
Unique to Petzl, the Wide Angle lens slides or flips over the LED to diffuse the beam with a single, quick movement. It allows the user to switch between focalized long-range lighting and diffuse proximity lighting. A single light source can address multiple needs.
4- New colors
Compact headlamps (TIKKA, ZIPKA...) are now available in the Work Solutions colors : yellow and black.
|
|
Intrinsically-Safe Inspection Lamp ISL 200 / 400-Ex
The ISL 200-Ex and the ISL 400-Ex are robust, cable-connected inspection lamps for industrial use in explosion-prone areas for zones 1 and 21 according to norm 1999/92/EG (ATEX 137). The inspection lamps are especially notable for their bright and extremely long-lasting illuminants.
|
|
Repair Light Series 6149:
By using modern cold cathode tubes extrem long service lifetime
Suitable as well for machine lighting
Anti-roll design in the hand grip
Adjustable light direction via suspension hook
Life expectancy more than twice of normal fluorescent lamps
|
|
Portable Ex-Lamps
Explosion-protected torch-, handlamps and seachlights for use in zone 0, 1, 21 and 22 hazadous areas as well as operation conform to ADR-guideline (94/55/EC).
|
|
- Explosion-Proof fluorescent luminaires EEx d IIC.
- Explosion-Proof floodlights EE x de IIB.
- Explosion-Proof lighting fixture Ex d IIC.
- Explosion proof Indicating lights; incandescent lights, rotating lights, flashing lights.
- Explosion proof traffic lights EEx d IIC.
|
|
Series C-LUX 6100 and 6500, 6114 and 6514 compact light fittings can be used for normal lighting, but also as information fittings or as group- or centrally-powered emergency lights.
Series ECOLUX 6600, EXLUX 6000 and EXLUX 6400 light fittings can be used for normal lighting, and also as group- or centrally-supplied emergency lights.
The light series T-LUX 6030 and T-LUX 6430 fittings are ideal for use on ships, in sewage and treatment plants, pumping stations water collection tanks and inspection pits. They can be used for normal lighting as well as for group or centrally supplied emergency lights.
Series 6014 and 6414 light fittings are preferred for use in spraying and painting installations but also in clean rooms.
Series 6012 and 6412 light fittings are preferred for use in sprying and painting installations.
|
|
|
Explosion protected fluorescent light fittings of series eLLK 92, eLLB 20, RLF 250 AB 12.. for use in zones 1, 2, 21 and 22 as well as nLLK 98/ nLLK 08 for use in zones 2 and 22 areas.
|
|
|
|
|
|
Pendant Light Fittings Series 6050:
For use in Zone 1 and Zone 21
Available light sources: high-pressure sodium lamps (HSE), metal halide lamps (HIE), halogen lamps (QT), compact lamps (TC-TSE), blended lamps (LME)
Salt water resistant housing in aluminium, optional with lacquer coat
Double lamp service life with TwinArc technology for high-pressure sodium lamps
Maintenance free operation and longer lamp service life with induction lamp
Mounting with ring bolts or tiltable mounting bracket
With connection box for easy mounting
External reflector and wire guard
Pendant Light Fitting IEC Series 6470:
For use in Zone 2, Zone 21 and Zone 22
Three sizes are available: size 1 up to 150 W, size 2 up to 250 W, size 3 up to 600 W
Available light sources: high-pressure sodium lamps (HSE), metal halide lamps (HIE), mercury lamps (HME), induction lamps (QL), blended lamps (LME), halogen lamps (QT), incandescent lamps (A)
Versatile mounting methods: ceiling, wall and pole mounting, mounting bracket, pendant mounting
Housing made of salt water resistant aluminium
Replacement glass made of temperature resistant borosilicate glass
External reflector made of powder coated galvanized sheet steel
Pendant Light Fitting NEC Series 6480:
For use in Class I, Zone 2, Group II C, Class I; Div. 2, Groups ABCD, Class II, Div. 2, Groups FG, Class III
Three sizes are available from 50 W up to 400 W
Available light sources: high-pressure sodium lamps (HSE), metal halide lamps (HIE), mercury lamps (HME)
Versatile mounting methods
External reflector made of glass-fibre reinforced polyester
|
|
Where a lot of light is needed and/or where large complexes or areas have to be illuminated, or where there are high ceilings, these are the ideal situations for pendant light fittings and floodlights.
The main field of operation is the illumination in hazardous explosive environments such as On- and Offshore areas, production and storage buildings or Ex-companies in the chemical industry. Also the illumination
of outside areas such as loading zones, harbour areas or even refineries.
|
|
|
These Fulton heavy-duty industrial flashlights ensure a long life in tough, industrial environments.
|
|
|
|
Lighting, Flashlights 
