|
|
Four-row and six-row cylindrical roller bearings are used almost exclusively in the metal industry. Their friction is relatively low when compared with other roller bearings. As they are normally mounted with an interference fit on the roll neck, they are particularly suitable for rolling mill applications where the rolling speed is high.
Since very many rollers can be incorporated, the radial load carrying capacity is exceptionally high. Multi-row cylindrical roller bearings are unable to accommodate axial loads but they can be mounted together with deep groove or angular contact ball bearings or with tapered roller bearings to help accommodate any axial loads.
|
|
Cross+Morse have the Sealmaster range of Pillow blocks available as follows:-
Pillow Blocks - Two Bolt Base
Expansion Type Pillow Blocks - Two-bolt Base
Pillow Blocks - Four Bolt Base
Visit our web site to see other Sealmaster products such as Mounted Ball, Tapered Roller, Spherical Roller Bearing units, Corrosion resistant bearing units, High Temperature furnace bearings and the Gold line beverage bearings.
|
|
pillow block plummer block
The features of products
Rational self-alignment
Large load carrying capacity
Longer service life
Efficent sealing
We can provide several types of sealings as follows:
1, RS+SLINGER type
2, Tripe-lips type
3,RST type
Solid housing
Bearing can be locked on the shaft easily.
Unique device to prevent bearing’s outer ring rotation
Complete interchangeability between bearing and housing
Easy installation
|
|
Plummer Block Housing
Plummer Block housings easily constitute bearing units by combining them with self-aligning ball bearings or spherical roller bearings.
Accuracy, strength, and rigidity are improved by NACHI original design.
|
|
The extended, diversified SNR bearing product range meets the most stringent specifications, to satisfy our clients, whatever their expectations or activity sectors.
Various types of cast-iron bearings are available: pillow block, flanged, tensioner, rod end or cartridge bearings.
Various attachment or mounting positions are possible, such as through-holes or tapped holes. They correct misalignment and can be regreased (lubricators or grease nipples can be mounted in the tapped holes provided for this purpose).
SNR also proposes pressed-steel bearings: pillow block, flanged, tensioner, rod end or cartridge bearings, also correcting misalignment, for low or moderate load applications. Pressed-steel bearings are delivered ready for installation.
Insert-bearings are life-lubricated and delivered jointly with the bearing bodies.
|
|
|
|
|
|
With the igubal® type series, a complete system of self-aligning bearing elements are available for the design engineer: Rod end bearings, clevis joints, flange bearings, spherical bearings and pillow block bearings.
igubal® self-aligning bearings are easy to mount, suit all angular variations and in many cases can be replaced by special housings.
The igubal® user utilizes all advantages of the employed high performance plastics. They have excellent vibration dampening properties, and are technically applicable in dry operation. They are insensitive to dirt, can operate in liquids and even in chemicals and are completely resistant to corrosion.
Bearing elements of the igubal® type series are very light, save installation space by their dimensions and save your costs twice: first in procurement and second in operation by the saving of maintenance and installation costs.
igubal® flange bearings correspond to the dimensional series E and are offered with 2 or 4 mounting holes. igubal® flange bearings are also suitable for maintenance-free dry operation. Thus the igubal® flange bearings are used for instance in washing brush controls, in facade sunscreen systems, in materials handling systems and in bakery equipment.
|
|
|
|
|
|
With the igubal® type series, a complete system of self-aligning bearing elements are available for the design engineer: Rod end bearings, clevis joints, flange bearings, spherical bearings and pillow block bearings.
igubal® self-aligning bearings are easy to mount, suit all angular variations and in many cases can be replaced by special housings.
The igubal® user utilizes all advantages of the employed high performance plastics. They have excellent vibration dampening properties, and are technically applicable in dry operation. They are insensitive to dirt, can operate in liquids and even in chemicals and are completely resistant to corrosion.
Bearing elements of the igubal® type series are very light, save installation space by their dimensions and save your costs twice: first in procurement and second in operation by the saving of maintenance and installation costs.
Special properties of the igubal® rod end bearings
- Maintenance-free dry operation
- High stiffening
- Very high fatigue strength in varying loads
- Compensation of misalignments
- Compensation of edge loads
- Insensitive to dirt, dust and lint balls
- Resistant to corrosion and chemicals
- High dampening properties
- Suitable for rotary, oscillating and linear movements
- Very low weight
- Dimensional series K and E, dimensions according to DIN ISO 12240
|
|
Stainless steel bearing units are used, amongst others, in sectors featuring high-component corrosion resistance requirements.
In these sectors characterised by demanding operating conditions (such as high relative humidity or direct contact with aggressive environments), the conventional grey iron self-aligning bearing units are no longer suitable and will not fully meet the requirements.
To satisfy the specific operating requirements, SNR proposes an extensive standard programme of stainless steel self-aligning bearing units, which also meets the USDA H1 standard criteria dictated by the pharmaceutical and agri-food industries (notably, the high-purity level of lubricant constituents), as all SNR stainless steel self-aligning bearings are exclusively filled with a grease complying with this specification.
Click on the link below for direct access to our on-line catalogue !
|
|
|
|
|
|
Tapered Roller Bearings:-
Type E-XTRA Available in flange or steel housed pillow blocks for selected sites, Type E-XTRA high capacity tapered roller bearings are stocked in all configurations. With interchangeable mounting dimensions, Type-E allows for easy upgrade from ball bearings at a moderate cost.
Type K Durable twin row tapered roller bearing with spring locking collar and a variety of mounting styles.
Double Interlock Durable twin row tapered roller bearing with double spring lock collars and a variety of mounting styles.
TAF Tapered roller bearing dimensionally interchangeable with SAF style pillow blocks. Installation ready.
E-TECT Seal Kit Add-on combination R seal/V ring sealing system for Type E, Double Interlock, Type K, & TAF bearings. One kit consists of one collar, special set screws & seal.
Type C Rugged tapered roller bearing available in a variety of housing styles.
Special Duty Duplex tapered roller bearing with tapered adapter sleeve mounting. Available in a variety of housing styles.
Hinged Cap Same features as Special Duty plus a hinged cap pillow block for quick replacement of bearing unit.
Traction Wheel Hub Assembly with tapered roller bearings for use with overhead chain conveyors.
All Steel Cast steel housing with duplex tapered roller bearings available in Pillow Block or Cartridge units.
Pictured Item Description:-
Durable twin row tapered roller bearing with spring locking collar and variety of mounting styles.
Features/Benefits
Reduced length through bore allows installation in tight spots. Split cast iron housing with replacement bearing insert units available. Self-aligning.
|
|
Self-Aligning Tapered Roller Bearing
Offers Important User Benefits
Cost Reduction!
Advantages Not Found in One-Piece Housing
|
|
SNR has developed a specific thermoplastic bearing units range offering decisive advantages to the users.
SNR thermoplastic self-aligning bearing units are designed for extreme condition operations, sometimes combining high loads, extreme temperatures, vibrations, corrosion and misalignment. In fact, our bearing units are fitted with seals and deflector baffles, as well as corrosion-resistant, pre-lubricated stainless steel rings and rolling bodies.
All our thermoplastic bearing units are lubricated with USDA H1 standard-approved greases. This standard involves the most stringent requirements in terms of hygiene and purity of the grease constituents or raw materials.
Of white colour PBT design, these bearing units feature a smooth surface preventing dust entrapment or fungus and bacteria development. For lubrication, SNR has designed an odourless, tasteless agri-food-compatible grease, harmless to food products.
|
|
We offer folling Wheel Hub Units for various brand cars, Such as GMC, Volkswagen, Nissan, Opel, Fiat, Buick, Ford, Chevrolet, Chevrolet, Oldsmobile, Ponitiac, Dodge, Comanche Grand Cherokee, Jeep Grand Cherokee, Cadilac, Acura, BMW, Benz,
Hyundai, Toyota, Honda, Acura, Honda, Toyota, Mazda, Nissan, Infiniti, Subaru, Chryslet, Mitsubishi, Mazda, Isuzu, Daweoo, Kia, Volve, Jetta, Citroen, Peguent etc.
|
|
Wheel bearing kits:VKBA 502, VKBA 504, VKBA 505, VKBA 506, VKBA 508, VKBA 510, VKBA 513, VKBA 516, VKBA
517, VKBA 518, VKBA 519, VKBA 523, VKBA 526, VKBA 532, VKBA 559, VKBA 612, VKBA614, VKBA 625, VKBA 626, VKBA 627, VKBA 654, VKBA 655, VKBA656, VKBA 658, VKBA661, VKBA 662, VKBA 664, VKBA 371, VKBA 686, VKBA 708, VKBA 709, VKBA 717, VKBA732, VKBA 733, VKBA 740, VKBA 741, VKBA 742, VKBA 743, VKBA 754, VKBA 756, VKBA792, VKBA 826, VKBA 828, VKBA 829, VKBA 830, VKBA 836, VKBA 838, VKBA 844, VKBA845, VKBA 846, VKBA 847, VKBA 848, VKBA 849, VKBA 897, VKBA 898, VKBA 914, VKBA916, VKBA 917, VKBA 918, VKBA 919, VKBA 920, VKBA 921, VKBA 938, VKBA 940, VKBA941, VKBA 959, VKBA 961, VKBA 966, VKBA 968, VKBA 969, VKBA 976, VKBA 1314, VKBA
|
|
| ... products without technical information |
| |
|
|