|
|
| Products 121 to 150 of 164 |
GSU Dia. 16 and 25mm. Element of the range Easy-2-Combines.
Race until 1000mm, flexibility of adjustment of the race.
Small overall dimensions (flat design). Allows a high speed of drive.
|
|
REXMOVER Dia. 16 with 80mm, race of 100 with 9.900mm possible according to the version.
System with compactness for long races at high speed (5M/s).
4 types: guidance internal, polyamide, external or reinforced. Center robust linear drive.
|
|
|
Mechanically jointed rodless cylinder series MY3 provides high functionality with reduced height and length. The uniquely designed piston shape enables reduction of the height and length as well as practical arrangement of the common piping passages, cushion mechanism and positioning mechanism. This has achieved drastic miniaturization and weight reduction.
|
|
Dynamic with roller guide.
• Max. stroke 5,000 mm
• Max. speed 10 m/s
• Repetition accuracy ±0.1 mm
• Max. feed force 1,500 N
|
|
|
Parker-Origa now offers the complete solution for linear drive systems. Designed for absolute reliability, high performance, ease of use and optimised engineering the ORIGA System Plus satisfies even the most demanding applications.
|
|
|
MXE electric screw actuators are available in two bearing selections. Solid bearing design optimizes stress distribution for optimal performance. Profiled rail design uses THK Caged Ball technology to reduce friction and extend actuator life. Maximum loads range from 70 to 1472 lbs depending on options selected. Strokes available in any incremental length up to 120" depending on body size and screw/nut choice.
|
|
A space saving and guided cylinder with no equal. With a sealing system
unlike any other and endless possibilities including true synchronization
of two or more cylinders the ZR is worth a look.
The answer for dirty and dusty environments.
Available with slide or roller guide
Extremely low leakage
Smooth linear movement
High durability and operational reliability
Deliverable with a brake and encoder
Integrated valves if required
|
|
Ultran Rodless Cylinders
The Bimba Ultran rodless cylinder provides one of the highest coupling strengths available. This means it can carry higher loads without causing the piston to uncouple from the carriage.
Bimba also offers two magnetic coupling strength options (Gold and Silver) to suit a wide variety of applications. The Silver option uses two sets of magnets instead of three.
Bore sizes are 5/16", 7/16", 9/16", 3/4", 7/8", 1-1/16", 1-1/4", 1-1/2", and 2".
Bimba offers a model with built-in guides (Ultran Slide) and an unguided unit (Ultran).
Save space and streamline your design with the Bimba Ultran rodless cylinder! Application possibilities include transferring, feeding, door opening, cutting, silk screening and overall length savings.
|
|
Guiding cylinder
with two slide guides
with short slide guide
with safety unit
with slide guide underneath
Technical Information
· ZSS and ZKS have been designed for higher loads.
· By mounting a linear guide way on the bottom side of the cylinder, very high loads and moments can be carried forward
· Maximum stroke 3000 mm, longer on
· ZSS with two guiding carriages and a fitting length just like the ZS standard cylinder
· ZKS with a guiding carriage
|
|
Ultran Rodless Slides
The Bimba Ultran rodless slide has two types, UGS-Ultran Slide, Gold coupling strength and USS-Ultran Slide, Silver coupling strength.
Bore sizes are 5/16", 7/16", 9/16", 3/4", 7/8", 1-1/16", 1-1/4", 1-1/2", and 2".
Options include stroke adjustment (both ends or one end), bumpers (both ends or one end), dowel pin holes for Transition Plates, switch track, and alternate ports (both ends or one end).
Accessories include shock absorbers, stroke adjustments, and stop collars.
Improper mounting of the Ultran slide could result in binding and/or excess breakaway. As a rule of thumb, the end blocks should be mounted flat with no more than 0.30 ° of differential misalignment end-to-end (including both end blocks).
|
|
APPLICATIONS
Fifteen year old fruit d’ experiment units SGLT are
already used in many fields:
Manipulator impression with jet d’ ink
Palletizer Drilling of printed circuits
Machines d’ gluing Engraving on plastic
Teaching placement CMS Machines
Special machines Machining
Displacement of heads d’ etc...
CHARACTERISTICS
. Quality ratio/price
. Lifespan
. Good precision of displacement
. Reduced weight: construction in alumini
|
|
|
Offers minimal deflection and straighter, truer linear motion (within 0.0002 inches per inch). Guidance system uses ground linear rails (and ball bearing blocks) for the lowest possible deflection when guiding the carrier and its load. Four body sizes with maximum stroke lengths ranging from 36" to 96" depending on body size and screw/nut choice. Maximum dynamic loads range from 100 lbs to 750 lbs and are based on 200,000,000 linear inches of travel.
|
|
- Available with either built in ball screw or drive belt
- Short delivery time
- Lightweight
- Highly rigid
- 2D & 3D CAD Drawings
|
|
Rectilinear Motion Enabled With A Round Shaft
The NB Slide Screw is a unique drive unit which makes efficient use of friction to convert rotary motion to linear motion. This unit is a very simple mechanism containing only radial bearings in contact with a shaft, providing ease of maintenance. Even if an accident occurs, this unit slips on the shaft, stopping itself to prevent further damage. The unit is applicable to a wide variety of devices by fully utilizing its features, although while accurate positioning would require an extra control.
|
|
The TOPBALL slide bush is a high performance bushing with 3 times the load capacity and the capability to provide 27 times the normal travel life of a conventional bushing.
The TOPBALL is available in a variety of configurations to fit different applications.
NB’s self aligning TOPBALL can be designed into many different applications such as factory-automation equipment, machine tools, industrial machinery, optical and measurement instruments and electrical equipment.
|
|
|
Pre-engineered, pre-packaged and ready to install. Load bearing design incorporates precision linear bearings for long life, high load capacity and low friction. One-piece extruded tube housing supports bearing rods to eliminate rod deflection and increase torsional stability. Rigid, torque-resistant, low-profile slide. Loads to 200lbs.
|
|
|
Pre-engineered, load-supporting and fully enclosed slide-style actuator uses a guidance system of recirculating bearings on ground steel shafts for consistent carrier tracking and long life. Patented band retention system with metal-to-metal seal keeps out contaminants. Low-profile, rigid design in one body size. Load weights up to 100 lbs. Strokes available in any incremental length up to 60 inches depending upon screw/nut choice.
|
|
RACO's linear actuators with tooth belt drive or spindle drive for single- and multiple-axis movements, put together for specific requirements with the motor drives required such as RACO's intelligent positioning motor, servomotors or step motors and the amplifier and control units as a system application. Or is may also be integrated into existing systems as individual building blocks.
Technical highlights:
stroke to 9 m
linear speed up to 17 m/s
linear thrust to 20,000 N
positioning accuracy up to 0.08 mm
no energy consumption at stop
accessories and electronic modules of RACO's electric actuators can be integrated
|
|
For applications requiring linear movement, SIPCO offers a complete line of TechnoMotion® products. Please contact us for questions regarding our linear movement products, our inventory, or specific applications.
LINEAR ACTUATORS-ACME and Ball Screw
SCREW JACK-ACME and Ball Screw
BELT DRIVE-Precision Belt Pulleys
PRECISION BALL SCREWS-Ground, zero backlash
BALL SCREWS-Rolled Design
|
|
Basically, the IF is a "belt-driven version of the IS Actuator". By combining the high moment loads of the IS with the speed of the FS, the IF Series has proven itself in providing torsional rigidity, reliability, and high speeds. Here is what the IF Series provides:
* AC Servo Motor
* Maximum stroke length: 2500 mm
* Maximum speed: 1750 mm/sec
* High rigidity base structure
* Double slider option for large moments and overhang
* Highly durable urethane composite timing belt
* High base resistance to torsional deformation
|
|
| ... products without technical information |
| |
|
|
Motorized linear guides, Rodless actuators
