|
|
Combines a rod screw actuator with a self-contained load guideance and support system. Complete selection of sizes, options and system components. Maximum dynamic thrust capacities range from 125 lbs to 2400 lbs. Standard or oversized guide rods for increased rigidity and lower deflection. Strokes in any incremental length up to 36 inches, depending upon body size selected.
|
|
|
|
|
|
ADVANCED DRIVING... with our new Heavy Duty Driven Linear System
High loads, demanding duty cycles, hostile operating conditions and ease of installation are the criteria around which Hepco's new Heavy Duty Driven Linear System (HDLS) was designed.
The distinct operating benefits which its features provide over conventional re-circulating systems are certainly accentuated by arduous application. Overhead gantries and steel beam drilling machines are typical examples of where our HDLS system excels.
Now this versatile family of Heavy Duty components has been extended to include a new driven option, the Heavy Duty Driven Linear System. This complements the rack and pinion drive option already available. The new addition is a belt-driven system with two bearing options - 64mm diameter for high load applications and 95mm for loads up to 40kN.
High and super high loads
So what does it comprise? The base unit incorporates single edge commercial 'V' slides mounted onto the beam with the slides positioned at the outer beam edges. Between the two slides is a continuous 50mm wide AT20 belt, firmly attached to the moving carriage. And if the application is really tough, a 75mm wide belt can be specified.
|
|
PE 40 SERIES
An electric piston with an alluminium body and a particularly compact and strong architecture, it has a maximum force of 140 N and a standard stroke of up to 35 mm and intermediate strokes on request.
Its GE version is equipped with a builtin encoder to control and manage the stroke of the stem in order to facilitate controlled and self-managed movements.
On request it can be equipped with a two-way encoder.
|
|
|
|
|
|
MACRON Modular Belt Driven Linear Actuators and Linear Drives are flexible positioning systems consisting of a high speed belt drive and self-supporting, wear resistant aluminum profiles providing precise linear motion in both horizontal and vertical operation.
Superior Performance
MACRON Linear Actuators and Linear Drives are designed for long service life and have been tested at full capacity for thousands of cycles to ensure trouble free operation.
The linear actuator housings are cast from rugged yet lightweight aluminum. The belt drive assembly connects the motor to the actuator with a highly durable steel reinforced polyurethane composite timing belt. Both lightweight and flexible, the belt has an extremely high tensile strength and trapezoidal-shaped teeth. The synchronous, pre-tensioned toothed timing belt to runs two geared pulleys mounted at each end of the actuator profile. One pulley acts as the driving gear, and the other as the driven gear.
A motor coupled to the drive pulley converts rotary torque to tangential force. The belt is available in several widths up to 50mm. This belt drive design offers superior performance over the typical ball screw, lead screw, or acme screw linear actuator including superior rigidity, high moment loads and faster speeds. Travel is limited in length only by the actuator profile itself.
When selecting an actuator, important specifications to consider include length of travel, rated load, positional accuracy and maximum rated speed. MACRON Linear Actuators feature travel up to 500 ft., loads to 10,000 lbs., accuracy to +/- 0.013 and speeds of up to 600 inches per second.
|
|
MODEL SERIES - MTR3L/ MTS3L
LINEAR TRAVEL - 8 / 13 mm & ( 0.03 / 0.04 mm /step )
Design - Mtr3L / MTS3L is a linear synchronous/ stepper motor of the permanent magnet type with two stator windings, for AC / DC supply . Phase displacement of the excitation current is achieved by connecting a capacitor in series with one of the stator windings in synchronous motors. Axial movement is determined by the resulting circular rotating field. Electrical reversal of the axial movement is effected by means of a single-pole changeover switch. The 12pole rotor causes to & fro when motor is energised.
|
|
These units are primarily for lifting or lowering Masses in both Vertical & Horizontal planes. The weight to be lifted is from 250 kg (0.25 Tons) to 150000 kgs. (50 Tons through various Frames of 0.25 T / 0.5T / 2 T / 2.5T / 5T / 10T /20T / 35T / 50T / 100T / 150T (T indicates Tonnage). These units give positive mechanical action, fail proof & Precise Positioning. The Height to be lifted (or) lowered can be upto 3000 MM.
There are two standard speeds available viz., Normal lift & Slow lift. Housing / Shell is made of Nodular (SG Iron) Casting from 2 Ton to 150 Tons. For 0.5 Ton & 1 Ton Models we use Aluminum shells & covers
There are two types viz
Lifting screw rod with the stationary head
Rotating Screw rod and moving NUT. Both types have two further design possibilities of Design A (upward & Design (B) Downward. All the Jacks can be used on sideways (or) angular ways also
|
|
|
Model GL is a single-axis actuator that allows a ball screw drive or a belt drive to be integrated with an aluminum base on which the LM Guide model GSR is mounted.
|
|
|
Designed to convert rotary motion into linear motion, Roh'lix Linear Actuators are ideal for positioning operations in all types of machinery. They are available in 5 different sizes from 5 to 200 pounds thrust. Designed for easy installation, Roh'lix Linear Actuators provide up to 100 million inches of travel life with near zero backlash.
|
|
Drive timing belt - Guidance shoes + double rails
Drive ball screw - Guidance shoes doubles rails
Drive timing belt - Guidance shoes doubles rails
Drive ball screw - Guidance shoes doubles rails
Drive timing belt - Guidance shoes doubles rails
Drive ball screw - Guidance shoes doubles rails
|
|
Rigid design on the basis of cast solid carriage and closed aluminum shaped.
Basic section: 40x40 - 60x 60 - 90x70
Load capacity: 300kg
Maximum speed: 5m/s
Maximum acceleration: 25 m/s ²
5 possibilities:
·Horizontal axis with belt
·Vertical axis with belt
·Vertical axis with belt with balancing of pneumatic load
·Pneumatic horizontal axis
·Horizontal axis with ball screw
·Guide pin
Our axes are provided with the flask of adaptation, reducer and driving coupling.
Many accessories of connection for the realization of multiple combinations
|
|
|
|
|
|
With the eLINE eCKK and eCKR Compact Modules, Rexroth has considerably simplified selection, assembly and above all start-up for users.
The stepping motor, already mounted, with positioning control has 16 freely programmable positions. For easy start up of the axis an easy-to-use communication software (download under construction) and pre-configured parameter files are available for download. By means of digital inputs, the eLINE Compact Module communicates with higher-level control systems. The axes also work in stand-alone mode without an additional PLC. The user operates the linear systems manually in jog mode and can enter destination positions easily using a Teach function.
The eLINE eCKK Compact Modules with eLINE Ball Screw Assemblies and the eCKR with a toothed belt have exactly the same main dimensions and connection dimensions as the well established standard Compact Modules from Rexroth. The predefined raster lengths with clearly assigned order numbers simplify the selection from the numerous strokes and lengths.
Two integrated back-lash free eLINE Ball Rail Systems ensure optimum running of the carriage. In hybrid technology, they combine the advantage of the low weight of aluminum with the hardness of the steel running surfaces admitted. The eLINE Compact Modules thus combine high traversing speed with high precision and low running noise over lengths of up to 1,440 mm.
The eLINE Compact Modules in size 90, lubricated for the duration of their usable life, move workpieces with a weight of up to 15 kg.
|
|
|
Linear axis at 2 axis, with traction with belt and rack, with predisposition for the mounting of gearboxes
|
|
Linear axles and linear oh systems
The company Romani offers a large assortment at linear axles and linear oh systems different considerable manufacturer.
The linear axles are propelled available by Kugelgewindetrieb, toothed belt or pneumatic cylinder, in different dimensions and modifications in aluminum or steel.
A large accessory assortment, like mounting plates, transmissions and engines, supplements the program. Short delivery times are made possible by the modular structure.
Whether for very precise, it snaps or the optimal linear unit arranged high-dynamic tasks, noiseless or particularly economical solutions, it for each application.
|
|
NCBM
The NCBM stage system consists of extremely rigid aluminium section, a MONORAIL BM as well as a ball-screw drive and is suitable for measurements, tests or machining processes with travels of up to 1500 mm. MINORAIL BM guides can be optionally fitted with an integral AMSA measurement scale.
|
|
The linear modules Super Wide Body Line provides a self-supporting frame to be easily integrated into the customer’s systems.
They are made of solid aluminium alloy profile with linear guide function.
A special treatment makes the rails’ surface hard like the hardened steel.
The sintered plastic compound of the roller lining resists to pollutants and preserve the rail from wear.
The combination hard alloy of the rails and plastic lining of the rollers provides a very silent running and a very long life (that is several years).
The bearings of the rollers can be life-time lubricated or equipped with lubricator (see catalogue).
The movement is activated through timing belt.
The standard accessories enable an easy and quick connection with motors and columns. Versatility, high competitive performances and prices are the key features of our Super Wide Body Line range.
|
|
Linear modules
SA/6
From the flexible positoning up to the exact measurement. That are application examples of the high dynamic, precise and compact linear modules.
|
|
Linear axis´s »MINI«
"Mini" linear axes are available with belt or spindle drives. Carriages are guided by means of rollers on guides mounted in the base profile. The stable and compact construction enables highly dynamic movement to be achieved within the load range. Servo motors are generally used for the drive but other forms of motorisation are possible. Axes can be supplied with a stroke of up to 6 m.
|
|
|
|
|
|
With the eLINE eCKK and eCKR Compact Modules, Rexroth has considerably simplified selection, assembly and above all start-up for users.
The stepping motor, already mounted, with positioning control has 16 freely programmable positions. For easy start up of the axis an easy-to-use communication software (download under construction) and pre-configured parameter files are available for download. By means of digital inputs, the eLINE Compact Module communicates with higher-level control systems. The axes also work in stand-alone mode without an additional PLC. The user operates the linear systems manually in jog mode and can enter destination positions easily using a Teach function.
The eLINE eCKK Compact Modules with eLINE Ball Screw Assemblies and the eCKR with a toothed belt have exactly the same main dimensions and connection dimensions as the well established standard Compact Modules from Rexroth. The predefined raster lengths with clearly assigned order numbers simplify the selection from the numerous strokes and lengths.
Two integrated back-lash free eLINE Ball Rail Systems ensure optimum running of the carriage. In hybrid technology, they combine the advantage of the low weight of aluminum with the hardness of the steel running surfaces admitted. The eLINE Compact Modules thus combine high traversing speed with high precision and low running noise over lengths of up to 1,440 mm.
The eLINE Compact Modules in size 90, lubricated for the duration of their usable life, move workpieces with a weight of up to 15 kg.
|
|
|
Pico series robots are single axis robots using a program-less controller PRC. While priced at a low level, each robot has various functions such as thrust control and zone signal output. It is also designed for great ease of use.
|
|
|
All electrical cylinders and linear axes / robots are available as clean room (ISO cleanliness class 4) and dust-/waterproof (IP54/IP65/IP67) types, too.
|
|
This is the enhanced 2nd generation of IAIs most polular series of linear actuator. The series incorporates a number of major design innovations which have greatly enhanced the capability of our ballscrew actuators.
Increased overall rigidity and frame strength
- Minimised overall length and smaller footprint
- AC servo motor with optical encoder
- Four different sizes
- Low, medium and high speed type
- Maximum stroke : 2,500 mm
- Maximum horizontal payload : 150 kg
- Maximum speed : 2,000 mm/s
- Repeatability : +/-0.05 mm ("P" precision design: +/-0.02 mm)
|
|
Robot tracks
Advantages:
- combination of 6-axis robot with state of the art linear module
- precise, hardened LM guides, or hardened flat bar
- high stiffness achieved by steel construction
- high flexibility in handling of parts
- excellent value for money
Technical characteristics:
- hardened, play free LM guides in size 35 - 55 or hardened flat bar
- hardened rack and pinion drive
- felt pinion for lubrication of the rack
- central lubrication system for complete axis
- repeatability less ± 0.1 mm
- easy floor adjustment
- driving speed over 2m/sec
- with covers on request
|
|
Encompassing all the benefits of the proven Hepco principle, the Driven Linear System is a complete mechanical drive package incorporating a rigid aluminium beam with fitted guidance system. These quality compact belt driven units have many useful features and can be used singularly or easily incorporated into X-Y-Z systems, in turn, offering a reduced engineering solution at a competitive price.
• Systems up to 8 metres in one length
• Hardened and precision ground slide
• Polyurethane steel reinforced belt for minimum stretch and high speed operation
• High capacity cap sealed bearings for long life system
• Compact motor mounting flange option
• Removable carriage platform for secondary machining
• Suitable for use with a wide range of motors
• Reduced engineering package
• Available with motor and controller package
|
|
With camoLINE you can combine different drive technologies within one application to build a handling system that precisely meets your needs.
The core components of the building system are:
* Electric linear axes CKK and CKR
* Pneumatic mini slides MSC
* Rotary compact modules RCM and grippers GSP
* Standardized, positive-locking connection elements
* Standardized system for cable drag chain installation
* Servo motors and stepping motors with matching controllers
* Kit for connection to base frame
* Aluminum profiles for constructing frames
The special benefit is: With its positive-locking connections, the building system offers very high accuracy - and takes a lot of the effort out of design, installation and start-up.
Ready-assembled multiple-axis systems available.
|
|
|
Linear guide with wheels with traction by chain, with predisposition for the mouting of a gearbox. Right to lift big load.
|
|
Linear advance series LF 4
Profiled out of anodic aluminum
Steel trees with utmost precision Ø12 h6 with tapped drillings M5
Sealing of profiled thanks to lip seals out of rubber abrasion resistant
Plates of extrémitées out of vacuum cast aluminum
Series LF
BlueLine series
Series ZF
|
|
With an integrated tooth belt drive, MINIMODULE is a highly precise and compact solution for positioning and motion challenges. Based on our MINIRAIL Guideways, sizes 9, 15 and 42, the MINIMODULE excels with its unique, compact design of minimal integrated parts. With MINIMODULE, you receive the same advantages of the SCHNEEBERGER MINIRAIL in the form of a module: high stiffness, corrosion resistant materials as standard and the lowest overall height on the market. MINIMODULE also offers a superior cost-performance ratio.
|
|
1/2 through 250 ton actuators to choose from. Housings are constructed of a durable aluminum alloy up to 1 ton and ductile iron / steel alloy for higher tonnage linear actuators. Load screws are precision formed of high strength steel to provide optimal performance. Gear nuts are high alloy bronze for exceptional wear and are supported by tapered roller bearing to provide both axial / side support. Complete systems designs and CAD drawings provided.
|
|
Linear axis of the line AXC are equipped with variable guiding- and drive- systems:
- THK linear guides with caged ball technology for highest load capacity at speeds up to 8 m/s as well as long-term maintenance-free operation.
- Maintenance-free roller guide system for middle loads and speeds up to 10 m/s.
- Preloaded and maintenance-free toothed belt for high speed use (10 m/s).
- High stiffness in the drive system and shortest positioning time by ball screw drive in the line AXC.
Linear axis of the line AXC are equipped with variable guiding- and drive- systems.
|
|
The linear actuators are integrated modular systems containing all the components required for operation.
The guidance systems in these linear actuators are based on linear ball bearing and guideway assemblies of series KUE, KUVE or KUSE or on track roller guidance systems of series LF or plain guidance systems. These are driven by means of a ball screw drive, toothed belt or direct drive (linear motor).
|
|
|
|
Motorized linear guides, Rodless actuators
