|
|
LoPro® is an actuated linear motion system based on Bishop-Wisecarver’s signature DualVee Motion Technology™, a proven, highly reliable design with over 30 years of field-tested installations.
LoPro provides smooth and quiet motion over long lengths, and offers unsurpassed performance in harsh environments. No other single linear motion system offers the flexibility of belt, chain, lead screw or ball screw actuation, as well as an undriven option. Systems may be mounted or un-mounted. Support beams are available in aluminum or steel to meet application demands and to provide ease of installation.
LoPro linear systems are available in four sizes, and can be built to accommodate virtually any stroke length (stroke is limited only by the method of actuation). With load capacities up to 5,000 lbs. (22,000 N) and speeds in excess of 8 meters per second, LoPro linear systems are suitable for numerous applications.
|
|
Linear guidance are characterized by a great facility of assembly, a broad choice of the load capacities, raised speeds of work, adapted races.
The weak efforts of bearing and suitable dimensions allow one long life of life.
Drives belt notched, ball screw or adaptation engine.
|
|
A new range of rod less actuators is designed by SBC for fast and accurate movement in one or multiple axes. All systems are based on aluminium beams with one or two integrated linear guides and one or two saddle plates. The customer can choose between three different drive units.
•Belt driven units for fast movements and economic solutions.
•Ball screw driven units for accurate applications.
•Linear motor driven units for fast and high dynamic solutions.
A big assortment of dimensions and modifications makes it possible to select an actuator that perfectly matches the demands of your application.
The modular design and the broad range of accessories like mounting plates, gearboxes and motors will give a perfect solution to the customers.
|
|
|
|
|
|
A BIG LINEAR STEP FORWARD
... for small applications
Hepco's new Profile Driven Unit (PDU) plugs a significant gap in linear motion technology. It is a robust, high performance system designed specifically for applications requiring a cost effective solution to fit into a compact space envelope. Mechanically simple but highly innovative, PDU is very attractively priced and can satisfy the light-load, slow moving application to the more dynamically arduous high speed requirement.
PDU is the product of a marriage between proven belt technology, advanced engineering materials and Hepco's expertise in aluminum profile design. It comprises a slotted profile into which fits a drive belt and carriage. This arrangement effectively seals the unit. But perhaps the most significant element of the PDU system is Hepco's new Herculane® wheel technology.
These wheels run virtually friction-free on the inside surface of the profile providing stable support for the carriage plate. The unit offers extremely low friction and due to the wheel rolling motion will run without the need for any lubrication.
The carriage plate of the PDU is designed to accommodate the mounting of a second PDU unit. In this way a compact, high-performance X-Y system can be quickly and easily created.
|
|
|
Linear guide with wheels with transmission by timing belt, with predisposition for the mounting of a gearbox
|
|
|
Belt-driven DB actuators operate @ 5.1 meters per second (MPS). No lubrication or maintenance. They are ideal for applications where speed is critical such as pick-and-place mechanisms on high speed automation equipment. Travel up to 6 meters, repeatability of +/- 0.025 mm, linear accuracy of +/- 0.083 mm per meter.
|
|
|
|
|
|
Introducing Pacific Bearing Company’s new line of linear actuator products: The PL series, MT series, and MX series. With the reputation for providing the most innovative the solutions to the most difficult applications, PBC makes no exception with this new line of actuators. All systems are durable, self-lubricating, can handle a number of different working environments and come available with t-slots for easy mounting.
For a highly accurate and low cost solution, the PL series actuators have no substitute. The newly designed, ball-screw driven system eliminates the need for costly belt-driven gear boxes, comes magnetically sealed to work in contaminated environments, and the precision machined aluminum design allows for easy installation and long-lasting durability.
The magnetically sealed, versatile MT series actuators can be integrated into many different applications, horizontal or vertical, contaminated or clean. This belt-driven actuator provides a highly repeatability and high speed capacity with a longer stroke length than ball-screw driven actuators.
With its durable, robust design, the belt-driven MX series actuators can carry a high capacity at speeds up to 5 m/s! Also available in several different applications—both horizontal and vertical—the MX is superb for applications with a greater moment load with its large CAM rollers and is available in a longer stroke length. Making the MX series the actuators for heavy loads at high speeds.
Applications for these products include: automotive, food and beverage, packaging, and medical equipment.
|
|
DESIGN
·Compact, anodic aluminum construction shaped
·Guidance is ensured by a rail cuts 15
integrated.
On this rail a carriage assembled on two moves
shoes with balls with scraping joints, having
each one 4 circuits of recycled balls
·Coefficient of bearing weak and constant, necessary
for the rectilinear transfers from great races, 5800
maximum mm.
·Rates of jusqu’ travel; with 1.2 m/sec.
·Accelerations of more than 10 m/s ².
·Temperature d’ use between 0 and 70°c.
·A brake with power failure 24VCC can be gone up
in option
·Engines step by step or Brushless, can
to be gone up on this range of slides (see table
with the back).
·The transmission of the movement is ensured by a belt
notched 24 AT 5 d’ one developed of 80 mm/tr.
butted of end of the road against proximity detectors likely to be stripped
or other on request are external.
·These motorized modular slides are planned for
to be gone up in table XY.
|
|
The MLT100 Actuator is suitable for the movement of light loads with very high accelerations and speeds.
The self-supporting structure of the rail, together with the threaded holes on its back side, enables a very easy and quick assembly with low costs.
The 4 rollers trolley is designed to fix the load through four M6 holes.
Key features of MLT 100 Actuator are high performances in acceleration and speed, compact design, silentness and in addition MLT 100 is maintenance-free.
|
|
The BiSlide Belt Drive Assembly consists of a motor/gearbox, mounted 90 degrees to a linear dovetail stage. The motor/gearbox couples to a stainless steel pulley which drives a steel reinforced timing belt.
The belt drive assembly is useful for long travel and high speeds. Speeds as high as 3 meters per second can be achieved using direct drive motors and high powered controllers. For high resolution, gear reduction motors are available. The belt drive’s high efficiency make it an ideal choice for moving light loads at high speed and for continuous duty applications.
The belt driven BiSlide Assembly is available in many length up to 220 inches (5.6 meters). Maximum payload is 260 lb./118 kg. Repeatability is 0.0002”/0.005 mm. Straight-line accuracy is 0.007”/10” length or 0.018 mm/25cm. The coefficient of sliding friction is 0.09. Cross-sectional size is 3.175” (80 mm) x 4” (100 mm)
|
|
- Stock lengths up to 3 meters
- Custom lengths up to 6 meters
- All steel profile rail for high load capacity
- 50 mm wide steel reinforced belt for heavy loads
- Several motor options available
- Stainless steel available
- T-slots on three sides for mounting and accessories
|
|
Belt Driven Ball: Guided Units
Belt driven, ball guided positioning slides by Danaher Motion are designed for smooth travel in dynamic applications requiring high speed, high acceleration. These families present a long life performance in the midst of acceleration rates up to 40m/sec2.
Belt Units: Slide Guided
Thomson's belt driven, slide guided positioning units by Danaher Motion are perfectly suited for dynamic applications requiring high speed, high acceleration, low maintenance and smooth travel. These low cost guide systems optionally adapt to harsh chemical environments.
Belt Driven: Wheel Guided Units
Thomson's belt driven, wheel guided products from Danaher Motion are designed for dynamic applications demanding high speed, high acceleration but requiring smooth motion with medium to high loads.
|
|
|
|
|
|
Compact Modules from Rexroth come complete with drive unit and controller. As plug and play solutions, they simplify machine designs and speed up the commissioning process. They cover the entire spectrum of mid-range to high-end assembly and handling applications. These linear motion axes can be supplied with screw drive, belt drive or direct linear motor drive and offer high dynamics, high load capacities, and high rigidity. Especially important for designers: Not only does Rexroth offer its Compact Modules in various sizes and in any desired stroke length, but also with optional extras.
Compact Modules with ball screw drive - CKK
- Maximum Length: up to 2.200 mm
- Maximum Speed: up to 1,3 m/s
- Load Capacities: up to 89.340 N
Compact Modules with toothed belt drive - CKR
- Maximum Length: up to 5.500 mm
- Maximum Speed: up to 5 m/s.
- Load Capacities: up to 56.530 N
Compact Modules with linear motor - CKL
- Maximum Length: up to 2.800 mm
- Maximum Speed: 3 m/s.
- Load Capacities: up to 13.646 N
|
|
These last years the technological exigeances of the linear systems made progress the development of products like the modules BI-RAIL and CP elitec.
These modules or units in advance are characterized by an high degree of flexibility and reliability. 8 sizes are available out of standard of 40 mm to 160 mm of width, the advance is done by means of screw ball or synchronous belt. Double guidance by rails and shoes with balls allows the transport of strong loads, the provision of the double guidance authorizes very important resumptions of couple with a maximum rigidity. The linear systems CP are equipped with a guidance especially studied and developed by Movitec, the advance is done by means of ball screw a great choice of screw pitch is available.
|
|
|
Pico series robots are single axis robots using a program-less controller PRC. While priced at a low level, each robot has various functions such as thrust control and zone signal output. It is also designed for great ease of use.
|
|
|
|
|
|
Compact Modules from Rexroth come complete with drive unit and controller. As plug and play solutions, they simplify machine designs and speed up the commissioning process. They cover the entire spectrum of mid-range to high-end assembly and handling applications. These linear motion axes can be supplied with screw drive, belt drive or direct linear motor drive and offer high dynamics, high load capacities, and high rigidity. Especially important for designers: Not only does Rexroth offer its Compact Modules in various sizes and in any desired stroke length, but also with optional extras.
Compact Modules with ball screw drive - CKK
- Maximum Length: up to 2.200 mm
- Maximum Speed: up to 1,3 m/s
- Load Capacities: up to 89.340 N
Compact Modules with toothed belt drive - CKR
- Maximum Length: up to 5.500 mm
- Maximum Speed: up to 5 m/s.
- Load Capacities: up to 56.530 N
Compact Modules with linear motor - CKL
- Maximum Length: up to 2.800 mm
- Maximum Speed: 3 m/s.
- Load Capacities: up to 13.646 N
|
|
Linear Modules
SCHUNK – the world of linear technology
SCHUNK linear modules. The entire world of linear technology for high-speed automation from one source. Compact modular design for combination of a wide variety of different modules to form one overall system. Depending on the load range and required stroke length, diverse components are also available for demanding tasks.
Strong arguments for linear modules from SCHUNK:
* Precise mini-slides
* Exact positioning
* Compact design
* Pneumatic linear modules
* High flexural strength
* Specially designed for assembly and handling technology
* High-strength gentry axes
* High load capacity
* Toothed-belt, ball screw or pneumatic drive
* Dynamic axis modules
* Servo-electric linear motor drive
* Extremely fast and precise
|
|
|
|
|
|
Handling-module, Typ LDH:
Extremely compact linear direct drive module. Components, optimally tuned to each other along with high integration density implemented in the construction of the module, guarantee for high efficiency and easy operator handling.
Drive:
Ironless, electronically commutated 3-phase linear
d. c. motor with permanent magnetic secondary component. Liquid cooling can be connected to the primary component to allow for high force operation performances.
Measuring system:
Incremental measuring system with optic scanning.
Slide:
Exact linear profile slides with recirculation linear ball bearings guarantee for exact operation cycles, torsion resistance and resistance to working stress.
Mounting and attachment options:
Standard dimension bore frames in the sliding component as well as T-grooves in the carrier profile allow high flexibility when attaching the linear drive handling modules to other devices.
Range of application:
Handling and positioning tasks requiring highly dynamic performances, high operating speeds and positioning exactness.
|
|
|
|
|
|
Linear Unit iLD 10, iLD 20 , iLD 16-150 and iLD 16-200
Example iLD 10
The iLD 10 linear units with direct drives are for tasks and applications in the handling area with a favourable price/ performance ratio.
The base is comprised of aluminium profiles with swallowtail design shaped steel guides and internal magnetic tracks with a string potentiometer.
Inside the drive slides are at least 4 ball bearings, adjusted backlash-free, as well as the spool pack with path measuring head. This results in a quiet operation without signal dead range, with high dynamics and movement speed.
Characteristics
* Aluminium linear guide with magnetic track and drive slide with spool pack
* No signal dead range, elimination of mechanical transmission elements
* Higher performance on a smaller scale
* String potentiometer 10 µm
* Guide is stable and twist-proof
* Widely separated guide surfaces of swallowtail shaped strip steel
* Cleanroom-compatible version
* Quiet operation, adjustable backlash-free
* High dynamics with movement speeds of up to 6.0 m/s
* No maintenance or lubrication required
* Profile lengths to 6m
|
|
|
Compact single axis linear actuators combine high quality NSK ball screws, linear guides and supporting bearings. Achieve maintenance-free operation with K1 Lubrication Units which are built in as a standard feature on these linear actuators. Each linear actuator features corrosion resistant, low-temperature, black chrome plating on the rail and slider. These linear actuators offer simplified design and installation across many industries.
|
|
|
|
|
|
Complementary to the popular and proven PRT Ring Slides & Track System, DTS is a fully integrated belt-driven track system, and includes a couple of ingenious features amongst its many 'reduced engineering' attributes.
Available in either rectangular or oval format and in two rail sizes (25 and 44), DTS can be supplied as a stand-alone unit in conjunction with the MCS Machine Construction System, or as a sub-assembly on its own bespoke mounting plate. A steel-reinforced timing belt drives an unlimited number of carriages via adjustable pulleys under either continuous or intermittent motion.
Optional features include the Trip Latch mechanism, which disengages the drive from individual carriages which may become impeded, saving the system from damage. Also the Carriage Locking System will be particularly useful during intermittent motion. It locks any number of carriages into a fixed and repeatable position for further operations to take place.
A range of control and sensing operations are available, and the system may be specified with a plain output shaft, fitted AC Geared Motors, or a range of gearboxes for customers' own motors to be added.
|
|
We offer a range of linear axes delivered without motorization, but with adaptation motor:
- Guides with ballscrew Type 308
=> 4 sizes (rods Ø12 to 25 mm)
load 40 kg max. , stroke 400 mm max.
- Module with rack Type 832
=> 1 size (rods Ø16 mm)
load 5 kg max. , stroke 320 mm max.
- Units with linear motion rolling guide for linear motors
=> contact us
|
|
The SLTE is freely positionable and has a precision, sturdy guide. Motors with an integrated encoder are available as the drive. For working loads up to max. 4 kg and fast positioning times (50 mm in approx. 400 ms).
Based on the design platform of the SLT, the SLTE provides practically the full range of interfaces as well as full compatibility with the modular handling and assembly system including adapter kits.
- Sizes 10 and 16 mm
- Strokes from 50 ... 150 mm
- Max. speed 170 to 210 mm/s ( with size 10/16)
- Repetition accuracy < 0.1 mm
|
|
an electric linear module for Gantries with linear Axes
example: Gantries and systems multi axes
|
|
The basis of the system program consists of portal-, vertical- and telescopic axis of the line AXS. These modules from the system program can be combined any way or with the line AXC to create optimally construed multi linear axis systems.
• Custom- made solutions by using components which are individually harmonised with the application: Linear axis with rack and pinion drive are especially suitable for applications with great stroke length - up to 12 m self- supporting, as butt joint version theoretic unlimited stroke length.
• Z- axis for taking vertical loads up to 1000 kg.
Optimally construed multi linear axis systems harmonised with the focal points of the customers requirements: Portal axis, Z- axis and telescopic axis from the system program can be combined any way.
|
|
Rigid toothed belt axes in 2 sizes. Select and attach drives freely or even with integrated drive and control for easiest initial start-up and wiring. Control directly from SPS(I/O) or over fieldbus.
|
|
Electric Ultran High Load Slide
Electric Ultran High Load Slides are the first standard electric models from Bimba Manufacturing.
Provides higher positioning accuracy, smoother operation, and facility for positioning control.
Perfect for addressing high moment loads, high side loads, and processes that require precision positioning.
Footprint similar to the Bimba Ultran High Load pneumatic line.
Available without motors, with DC motors, or with step motors.
Available in two frames, 09 and 17, fine or coarse.
Ball and lead screws are also available.
|
|
SMAC linear slide actuators (Moving Coil Technology) such as LASW20 series are successfully used in high speed bowl feeder & escapement mechanism.
•50,000 cycle/hour
•Can run 24/7
•Units have been in the field for 18 months with no failures
•Life test unit currently at 250,000,000 cycles
SMAC linear slide actuators are also ideal for very demanding applications such as scanning, bottle ejecting, labelling, positioning, gauging and inspection to name but a few.
SMAC provides a comprehensive selection of linear slide actuators. They are fully programmable in force, velocity and position. Standard linear resolution on all SMAC actuators is 5micron with 1micron, 0.5micron and 0.1 micron options available on most models.
|
|
Linear ServoSlide
Key Features:
· Turn-key solution
· Modular design
· Direct Linear Drive
· High speed and acceleration
· Zero backlash
· Fast settling time
· Long stroke
The Direct Drive Linear Actuator
Linear Servo Slide system is an integrated linear actuator that eliminates wear, friction, backlash and compliances associated with mechanical transmissions, such as ball/lead screws, rack & pinion, belts/pulses and gearboxes.
|
|
|
|
|
|
GB-Series Linear Actuator
ORMEC offers two lines of linear ball screw actuators. Each actuator has a high performance servo motor and has rugged construction to satisfy your automation requirements. There is a single guide model and a dual guide model both are high accuracy and low backlash.
X-Y configurations are also available, if this is what you are looking for contact our factory for more information.
SGB 54 / 72 Series
* Single guide ball screw
* Compact size
* Servo Motor included
* Incremental Rotary Encoder 2000 rrp included
* Limit Switches built in and concealed
* Preload 2%
* Resolution on 10mm is 1.0 µm, computed
* SGB54 - width of 54 mm
* SGB72 - width of 72 mm
* Stroke from 100 mm to 500 mm
DGB 150/ 180 / 200 Series
* Dual guide ball screw
* Strokes from 200 mm to 1200 mm
* Compact size
* Servo Motor included
* Incremental Rotary Encoder 2500 rrp included
* Limit Switches built in and concealed
* Preload 2%
* Resolution on 10mm is 1.0 µm, computed
* SGB54 - width of 54 mm
* SGB72 - width of 72 mm
|
|
|
|
Motorized linear guides, Rodless actuators
