|
|
INSULFAB™ Ventilation Ducting
Flexfab insulated air duct is recommended for applications requiriing low heat loss factors...
An insulated air duct recommended for applications requiring low heat loss factors. This duct is useful where flexibility and low weight is a design requirement. Abrasion resistance is assured by the use of a "Vin-O-Fab" cover over the reinforcing wire. A soft cuff is provided for ease of installation.
Characteristics of Flexfab insulfab duct....
Safety yellow is standard
Fiberglass insulation
Lightweight, easily stored and transported
Will handle large volumes of low pressure air.
Additional materials are available: Teflon® coated fiberglass, vinyl coated nylon, vinyl coated fiberglass, neoprene coated fiberglass, neoprene coated cotton, neoprene coated nylon, silicone coated fiberglass. Consult factory for additional specifications, materials, sizes and colors.
® Teflon is a Trademark of DuPont
|
|
|
|
|
|
Ground Support
Ventilation Ducting
Flexfab's gound suport ventilation ducting is constructed of polyurethane foam insulation beween 1-ply of urethane and 1-ply of vinyl coated nylon...
Polyurethane foam insulation between 1-ply of urethane and 1-ply of vinyl coated nylon with a sewn on abrasion resistant scuff strip. Velcro flap cuffs at each end allow for easy attachment and minimum air leakage.
Characteristics of Flexfab's insulated ground support ventilation ducting include heavy duty, polyurethane foam insulated ducting with a sewn on vin-o-fab scuff strip. Scuff strip reduces wear caused by dragging duct across rough surfaces. Velcro flap cuffs permit easy attachment of additiona sections to form long duct assemblies...
Heavy duty, polyurethane foam insulated ducting with a sewn on "Vin-O-Fab" scuff strip. Scuff strip reduces wear caused by dragging duct across rough surfaces. Velcro flap cuffs permit attachment of additional sections to form long duct assemblies. Flexfab ground support ducting is resistant to breakdown and powdering of insulation. Lightweight for ease of handling.
ground support ventilation ducting
Flat Duct Ventilation Hose
Tapered Adapter Duct
Outside Diameter: (When Rolled) 16" Width: 20" (for 12" duct); 27" (for 14" duct)
BTUH/Hr./Ft. Length/F: 1.09 (for 12" duct); 1.28 (for 14" duct)
Temperature Range: -40°F to +250°F (-40°C to +121°C)
Meets FAR 25.853 B2 horizontal test.
|
|
Camfil Farr CamHosp is the product you need for perfect unidirectional airflow. CamHosp an be installed in two to three hours by two people. The plenum, structure and filters are provided with very detailed instructions. On request Camfil will assemble the unit and / or test it.
Use Screentech and increase lifetime for filter by protection them from example splash. In extremely sensitive departments (major burns, immunodeficient patients, etc) CamHosp includes a format adapted to provide localised protection of a bed.
|
|
|
ACS provides a wide range of air handling equipment suitable for various applications ranging from collection of atmospheric dust in air intakes to the collection and treatment of radio active, toxic, gaseous, and odorous impurities from exhaust gases.
|
|
|
Aluminium honeycomb vent panels for EMC screening in a range of styles and sizes. Steel honeycomb vents are also available.
|
|
• HIGH LEVEL OF EMI/RFI SUPPRESSION COMBINED
TO PASSAGE OF AIR IN SHIELDED ENCLOSURES
• ALUMINIUM HONEYCOMB FOR HIGHEST AIRFLOW OF
ANY VENT MEDIUM (LOW STATIC PRESSURE DROP)
• ALUMINIUM WIRE SCREEN SANDWICHED BETWEEN
RIGID EXPANDED MESHES FOR DUST ARRESTING
(INLET COOLING PANELS)
• FURNISHED READY TO INSTALL WITH STANDARD
ALUMINIUM FRAME AND EMI SHIELDING GASKET
(fastener or thru-holes on the frame for fixing)
|
|
|
ATI's brass and steel honeycomb vent panels are recommended when structural integrity, H-Field shielding effectiveness, harsh environmental conditions and durability are primary concerns. Brass or steel extrusions are customized to surround brass or steel honeycomb and welded in place. Continuous flow soldering provides enhanced contact between the honeycomb and frame improving integrity. Alco Multi-Gasket, a combination of neoprene sponge and monel mesh fit, most applications although Alco-Knit or conductive gaskets are available. Standard through holes and spacing for surface mounting installation is customized. Vents without gasketing can be welded in place. Brass vents are typically finished with tin lead plating. Steel vents are commonly finished with tin plating. Other plating options available. Ideal for mobile military transportation, communication shelters or equipment where EMP or TEMPEST is required.
|
|
SILAIR is a panel for electromagnetic protection and screening for ventilation, heating ducts, lighting apertures…
The metal honeycomb cells of SILAIR use the waveguide principle which provides excellent attenuation but a minimal loss of pressure.
It allows air to circulate while ensuring the electrical screening of the aperture.
The outer frame enables the SILAIR panel to be fixed to its support. In certain cases a conductive gasket is recommended between the frame and its support.
|
|
|
Leader Tech introduces its high performance EMI shielded air vent panels to its product range. Air vent panels are manufactured using aluminum, steel or brass and are available in various plating finishes and mounting configurations allowing for installation in most applications.
|
|
|
|
|
|
StreamShield™ Commercial EMI Vents
- available with fire barrier coatings
Low cost StreamShield vent panels provide high levels of EMI shielding in applications such as computer network and wireless infrastructure cabinets. These vent panels feature aluminum honeycomb within rolled aluminum frames. The result is a lightweight, high airflow solution for enclosures requiring both cooling and high levels (50 dB at 10 GHz) of shielding. An optional intumescent coating provides fire barrier properties. On exposure to flame or heat at 300°F (149°C) the coating expands rapidly to fill the honeycomb cells and prevent flame passage. Standard panels feature 1/8 inch (3.2 mm) honeycomb cells, 1/4 inch (6.4 mm) thick. Complete frame/honeycomb assemblies are chromate conversion coated.
SLIMVENT™ Thin Profile EMI Vents
Chomerics' SLIMVENT™ air ventilation panels provide 90 dB attenuation at 1 MHz to 50 dB at 10 GHz. The panels are made from expanded aluminum or monel (nickel-copper) foil, secured in an extruded aluminum frame only 0.187 inch (4.75 mm) thick. This narrow profile is ideal for accommodating critical space limitations at air intake and exhaust ports. The frame has an integral wire mesh gasket for EMI shielding at the mounting interface. SLIMVENT air panels are fabricated to customer specifications.
CHO-ITO™ - ITO Coated Conductive Windows
Chomerics offers a range of EMI shielded windows with ITO conductive coatings for use in EMI/RFI shielding applications. The combination of high visible light transmission, near neutral color and low electrical resistance make an ideal EMI/RFI shield for electronic displays requiring moderate shielding effectiveness and high quality optical properties. CHO-ITO™ is a cost effective alternative to a mesh laminated window.
WIN-SHIELD™ Shielded Windows and
Contrast Enhancement Filters
Chomerics WIN-SHIELD windows are performance-tested glass and plastic assemblies for displays requiring EMI radiation or susceptibility shielding. They provide highly effective EMI shielding and exceptional optical clarity. Windows can be produced in glass, plastic, or combinations of both. Shielding is provided by wire mesh or by deposited conductive coatings. Chomerics' prototype-to-production service includes an extensive line of spectrally matched filters to meet stringent contrast enhancement performance requirements for both flat and curved configurations.
|
|
Gokser Machine Co Ltd founded in 1987 ,primarily manufactures air ducts which are capable of being bended ,folded to be reduced to be lengthened.Ducts are manufactured with different sizes and materials interms of their suitability with its ease of use,convenience and efficiency for air and other gas fluids transfer at industrial systems,with the heating rande of -40 ºC to +1100 ºC .
Please ask for our compatible prices of our high quality products
|
|
Suction and blower hoses for temperatures from -20 °C up to +280 °C, DN 40 up to DN 900
Applications:
extraction af gaseous media: air conditioning and ventilation industry, suction plants, ventilation and suction, welding fume extraction (with increased spark concentration), tent heating, in areas with raised safety requirements, low pressure applications
Properties:
- highly flexible
- compressible
- small bend radius
- external steel helix protects against abrasion
Connecting elements:
- hose clamps
- hose connectors
- hose reducers
|
|
|
Polyurethane and TPV Hoses; abrasion resistant, hot-air, semi-flexible, hardly inflammable, microbe and hydrolysis resistant, food and pharmaceuticals, antistatik and electrically conductive hoses, fully flexible ducts.
|
|
|
Jet nozzles are used for preference where the supply air from the diffuser has to travel a large distance to the occupied zone. This is the case in large rooms (halls, assembly rooms etc.), particularly when the distribution of air via ceiling diffusers is not possible or not practical. Here jet diffusers are arranged in the side wall areas. The direction of the air stream from the type DUK-V jet nozzle can be easily adjusted manually to suit particular on site conditions. Also the pivoting movement can be motorised within the range of ± 30°. The electric actuators for this can be externally or internally mounted.
|
|
Designed to retract the hose with the assistant of an electrical high-torque motor.
We recommend this reel for truck service shop applications where hose and nozzles can be heavy and overhead cranes have to move.
|
|
|
Exhaust Gas Extraction Units: Wall-hanger units, Mobile units, Roller Units, Exhaust gas spiral hoses, Hose holders, Spiral hose clamps, Exhaust nozzles, Exhaust smoke aspirators.
|
|
|
|
|
|
DOSPEL Professional is the only Polish manufacturer of integrated duct ventilation systems RSystem type.
In the ducts manufactured by DOSPEL the ending is turned inside out and formed with the shape of a frame profile. All elements are 100% repeatable, fit ideally one to each other and therefore there is no necessity of using any sealing substance. The connection is non-invasive, so the zinc layer on the metal sheet doesn’t get damaged. The ducts manufactured with the RSystem technology are very durable.
The ducts are manufactured out of zinc metal sheets or, on the customer’s wish, out of acid-resistant, aluminium or black metal sheets.
Thank to the most modern technology and wide range of used metal sheet tightness, we manufacture the installation elements in following pressure classes: 1, 2, 4 and 5 (standard: class 1 and 4)
Thank to the special sealing of frame connections, the DOSPEL standard is tightness class A, B.
All moulders are dimensioned according to DIN 18379 norm, which ensures the uniformity and repeatibility of elements.
Wanting to fit to Customers needs, the company has diversified the range of normalized elements for moulders with not occurring norms, but often met in the projected ventilation currents.
Depending from the Customers demands, all elements can be protected with an additional warming up layer (mineral wool or mineral wool with additional metal or aluminium casing) already on the prefabrication stage, which significantly improves protections quality and accelerates the subsequent mounting of elements on the place of construction.
|
|
Oil Vent is a single wall vent connector and is designed to make connections between appliance and common vent such as masonary chimney, or z-flex liner products both easy and economical.
|
|
DESCRIPTION
Phonic insulated flexible duct consisting of :
- a flexible ALUFOC A100 punched core out of Aluminium/Polyester,
- a thermal insulation of glasswool with a thickness of 25 mm and a density of 16 kg/m3,
- a vapor barrier consisting of aluminium foil reinforced by a glass fiber scrim and a layer of polyester foil.
- other glasswool thickness on request.
APPLICATION
For all low pressure ventilation, air-conditioning and heating systems, needing a thermal insulation.
|
|
ASD-150, ASD-200 Stainless Steel Ventilator
304 Stainless Steel
Dimensions: 150 X 40 mm, 200 X 50 mm
1.5 mm diameter holes
Application: Various
Finish: Satin (Stainless Steel)
Please visit our website for further information about this and other similar products.
|
|
The B.O.A.® swing arm is easy to install and will improve working conditions by extracting gases, fumes and vapours at source.
Once set up, it can be easily adjusted to different positions and will stay in that position by means of a balancing system.
|
|
Market leader
The SFD stationary welding fume filter has a 50 m² DuraFilter®. This unique disposable welding fume filter, gives the SFD a huge technical lead over other models. Taking into account the cost price and the operating costs, it is the best and most economical unit on the market up to a certain annual usage of consumables.
|
|
Features
- Galvanized steel tubes
- Powder coated finish
- All external joints and adjustments
- Internal damper
- Grab handle around the hood
- Heavy duty 360° swivel with safety stop
- Heavy duty telescoping spring
Applications:
- Welding Fumes
- Grinding Dusts
- Dry Dusts
- Soldering Dusts
- Powders
- General Smoke Extraction
- Point of Origin Extraction
|
|
The optional available adapter for the hood guarantees a more effective collection of the dusts.
Technical information:
Can be supplied in lengths from 2-8 m
|
|
Technical specifications
Light.
Corrosian resistance.
Easy setting of the articulations.
All the articulations are out of the air flow.
Hood swivelling in all directions.
|
|
In industrial workingplaces,various harmful gas, smoke and dust spread out to atmosphere and causing big health problems, especially serious damages on lungs of workers. Therefore these extremely harmful gas, smoke and dust must be extracted from working area to provide sanitary working places.And that means reduced time-loosing and increased productivity.
Ünveren presents effective solutions for systematic air-cleaning. The ideal solution is systems for protection of workingplaces.
|
|
CARAPACE
Arm with or without ventilator.
4 lengths: 2,3,4 or 5 Mr.
2 sizes of ventilator (standard 075/0,75 kw, type 110/1,1 kw).
Flow from 800 to 1500 m3/h.
|
|
|
ATI-Thin Filter is the thinnest profile EMI shielded air filter. Extruded aluminum surrounds a singular thin piece of expanded monel or aluminum metal screen and welded in place. Alco-Knit or conductive gasket increase shielding effectiveness. Through hole locations are customized for easy surface mount installation. Plating options enhance shielding effectiveness. ATI- Thin Filters are frequently placed at intake and exhaust areas and are best utilized where narrow space limitations are a requirement.
|
|
1. It is easy to exhaust heat of inside box to outside.
2. It is easy to install cooling pan inside the box.
3. It is designed to prevent the penetration of rain.
Item : V60, V80
|
|
|
|
Ventilation, suction equipment: extraction arms, air ducts, grills...
