|
|
2400 Series dispensers bring exceptional process driver to a wide variety of benchtop dispensing processes where industrial adhesives, lubricants, silicones, epoxies and other assembly fluids are applied.
By using a digital timer and a precision air regulator instead of operator judgement to control the amount of fluid applied, 2400 Series dispensers make it simple to produce uniform dots as small as 0.004 inches in diameter, apply neat controlled beads, or fill cavities with identical volumes of material |
|
Not only the right choice of professional adhesive is important, but also the right equipment. Handling is possible either directly from the cartridge or with our tank dispensing machine from our original packaging. As a result, you can have an exact dosage of different components, from heavy paste to fluid paste.
Our offer:
Cartridge dispensing machines
Quasi volumetric dispensing machines
Tank dispensing machines
Special dispensing machines
Accessories |
|
| ITW Dynatec's Manual Professional adhesive Applicators are hand-held hot melt adhesive applicators which dispense hot melt adhesive onto a substrate via manual activation of a trigger. The DGII applicators are electrically heated independent of the adhesive supply professional hose. Temperatures are controlled by the controller at the adhesive supply unit. |
|
| ITW Dynatec's APEX High Speed Slot Die Applicator is an air-operated hot melt professional adhesive applicator assembly with an optional professional filter manifold. The applicator is used with intermittent pressure and constant pressure hot melt adhesive supply units (ASUs). APEX models are offered in six different module configurations. |
|
Pneumatic bead professional gun provides production versatility for contact and non-contact, high- or low-pressure cold professional adhesive operations, including packaging, corrugated, professional bag and sack, converting and product assembly applications.
- Reduce manufacturer of nozzle dripping with reverse-needle stroke action for clean cutoff.
- Improve pattern uniformity with integrated needle and seat design that provides consistent adhesive flow.
- Speed setup with vertical micro-adjust control for critical gun positioning.
- Meet diverse pattern requirements with coating width up to 100 millimeters (3.94 in.) for contact coating, and nozzle diameters ranging from 0.3 to 1.5 millimeters (0.012 to 0.059 in.) for non-contact delivery. |
|
TEC 6100/BMK
This bench mount kit converts your TEC 6100 to a statically
mounted foot-operated glue station. It allows operator to
have both hands free for gluing applications, improving
productivity by up to 100%.
TEC 4000/TK
Used in conjunction with the bench mount kit, the TEC 4000/TK enables a measured amount of professional adhesive to be applied with each operation of the
foot pedal. This improves quality, guarantees consistent
bonding, and reduces the amount of adhesive used. |
|
| Hot melt professional adhesive feeders automatically transfers hot melt adhesive from a bulk case to the adhesive supply unit increasing productivity and reducing equipment down time by keeping the adhesive supply unit full. |
|
The TEC 3200 is unrivalled in performance, reliability,
and professional adhesive output for a professional gun of this type. The allelectric
TEC 3200 has many unique features, such as an
automatic stand-by and plug-in temperature control modules. |
|
| When it comes to hot melt glue supply units ITW Dynatec leads the industry. We manufacture a complete line of innovative professional adhesive supply units for low, medium and high-speed packaging operations. No matter what you need, Dynatec has the right hot melt glue supply unit to fit your needs. |
|
Simplify daily operation.
Reduce maintenance and associated costs.
Speed up and ease installation.
Connect and communicate with other melters and line machinery using standard industrial network protocols.
Expand to meet future requirements.
Minimize parts inventory with compatibility to previous-generation Nordson products.
|
|
The cold glue supplier of spray gun MZF is designed to air-atomized application of low viscosity fluids.
Solid and compact construction delivered with nozzle specifications and air cap coated with antistick treatment.
On request this professional gun is available for solvent or acetate fluids |
|
The TEC 6300 hotmelt spray applicator uses special
TECBOND semi-pressure sensitive hotmelts for a wide
variety of packaging and product assembly applications.
Excellent for most types of foam assembly.
Pneumatics required. |
|
State of the art microprocessor for glue application system, designed to control electrical or electropneumatic industrial guns for precision application of professional adhesive at high speed.
Form 4 to 64 independent channels with four programmable patterns.
Every channel can be programmed to operate with lines or dots.
Programmable configuration for packaging or collator.
99 programs memory.
|
|
| The Pattern Controller is one component of an professional adhesive application system consisting of a hot-melt unit, cold glue pressure vessel or cold glue pump, adhesive hoses and applicator heads. The controller can be used for hot-melt or cold glue application. The pattern controller activates manufacturers of solenoids for the applicator heads in order to create individual adhesive patterns. Click on the links below to learn more about the full line of ITW Dynatec Hot Melt Pattern Controllers. |
|
Panacol UV-systems are currently demonstrating their efficiency in the field of UV-curing of UV-adhesives, potting compounds, coating, finish and fluorescence-inspection in various European companies. The product-line of specific UV-lamps permits extensive application possibilities in handicraft to large production plants within the electronics-, optical-,
medical- and automobile industry.
Our product range:
UV-Hand lamps
Hand lamps for on-grid mobil use
UV-Point Source
UV-Point Source for small and point shape areas
UV-LED
Innovative UV-technology: Curing without heating!
UV-Flood lamps
UV-lamp systems for medium til large curing areas
UV-industrial conveyor systems
Conveyor systems with integrated UV-curing lamps
UV-Professional cabinet
UV-curing in a closed UV curing cabinet
UV-Special UV systems
Customised UV curing systems
Accessories
Light slides, spare bulbs, industrial goggles... |
|
| The UV bulb is a key component in a UV curing lamp. DYMAX UV curing bulbs are designed to maximize UV curing intensity while minimizing intensity degradation over time, resulting in fewer bulb changes and lower operating costs. The intensity and spectral output of UV curing bulbs determines their ability to cure UV adhesives and UV coatings. Metal halide bulbs come standard in DYMAX UV curing lamps to match the cure chemistry of most DYMAX UV curing adhesives. Refer to the chart below for UV curing bulbs. |
|
TS-350 is a system types them for the dosage of the fluid of any degree of viscosity. Precise and poured it offers them the possibility memorizzare until to 10 various programs, concurring reproducing sequences of points or lines of dosatura with accuracy and repeatability. It includes the regulation of the empty one in order to eliminate the problem of the gocciolamento during the dosage cycles.
Modern and winning the design is studied in order to occupy minor the space possible on the professional workbench and also in order to concur the impilamento more unit over the other. An advanced system of management of the presisone and the empty one, bound together to the timer types them, assures consisting and ripetibili dosages reducing remarkablly the waste of materials.
Available in 2 versions in order to operate to various pressures of exercise: 0 -100 psi for applications of general character and 0 - 15 psi (bread-board TS-355) for specific applications with fluid to lowest viscosity. The systems are ready to the use in any part of the world thanks to the manufacturers of power supply universal and are supplied with the accessories.
Systems DX can control the following cocks:
Valves to crushing of tubetto
Bobbin valves and miniums bobbin
Needle valves suppliers and micro industrial needle
Diaphragm valves manufacturers |
|
| The professional adhesive industrial spray gun Maxi-ND-K is specially designed for processing dispersi¬on adhesives. All parts in contact with the material are made of stainless steel. Due to the low-pressure atomisation (system HVLP), a droplet ¬spectrum that facilitates optimum adhesions is generated. High application efficiency ensures good material exploitation. A large selection of manufacturers of nozzle sizes: 0.5/0.8/1.0/1.5/1.8/2.0/2.2/2.5 mm Ø is available. Owing to the shearing sensitivity of the spraying media, material transfer should occur without pulsation. For this reason, pressure reservoirs from WALTHER PILOT are the best solution. The tanks are available as standard in many sizes. |
|
Electromagnetic industrial guns for dots or lines application at very high speed.
Available with short manufacturers of nozzle or long nozzle.
These guns can handle medium viscosity cold glue with a maximum pressure of 20 bar.
A micrometric adjustment knob gives a fine control of dot or lines size without the use of any tools.
It is possible to make multi-nozzle head for cross gluing with minimum 11 mm nozzle distance. |
|
Compact elettropneumatic extrusion professional guns with long atomizer, micrometric adjustment knob, double effect operation with solenoid valve supplier.
Suited for contact or not contact glue application.
The micrometric adjustment knob give a fine control of glue quantity.
On request this gun is available for solvent or acetate fluids. |
|
| The DH12 Series Pneumatic Applicators are an excellent choice for use with water-based adhesives in a broad range of scenarios. Low voltage DC operation allows control without the need for proprietary pattern timers and the compact design makes for easy retrofit and installations. A micro solenoid valve mounted directly to the applicator provides quick response times and positive flow control.installation. |
|
The TEC 6100 is a high output production tool. Glue is dispensed by a pneumatic piston, so the tool is effortless to use. Ideal for
the most demanding applications and for continuous use.
Compressed air required. |
|
Reconditioning your Nordson equipment keeps it performing reliably, providing and economical and efficient means to protect your Nordson investment for years to come.
Buy rebuilt or refurbished hot melt systems from Nordson and you will save 40 to 50 percent compared to the cost of a new system.
Receive a warranty of 1 year on reconditioned equipment, and a 2 year or 4000 hour warranty on all new SP pump and new VistaTM control replacements.
Rest assured that factory-trained Nordson technicians calibrate, test and certify all reconditioned equipment.
Protect your investment and warranty with reconditioned equipment that includes genuine Nordson hot melt replacement parts.
Receive original factory quality from the world leader in hot melt dispensing equipment
|
|
|
|
Bonding: Equipment and accessories
