Bonding equipment and accessories

352 companies | 1,108 products
needle dispensing valve
needle dispensing valve
DA 400 MINI

The needle valve DA 400 MINI is designed to dispense in a controlled, precise and repeatable way, fluids of various viscosity. The valve has the ability to be customized with nozzles with various shapes and sizes,available in the catalog. ...

See the other products
DAV TECH Srl
needle dispensing valve
needle dispensing valve
DA 400 MINI PEEK

The DA 400 MINI PEEK valve use the high features of PEEK (Polyether-Ethere-Cheton) to dispense very small amount of anaerobic glues, reaching technical results that are impossible to achieve with traditional diaphragm valves. The accuracy ...

See the other products
DAV TECH Srl
diaphragm dispensing valve
diaphragm dispensing valve
DA 250

The diaphragm valve DA 250 is designed to dispense in a controlled, precise and repeatable way, low to medium viscosity fluids such as anaerobic adhesives (thread locker and coaxial blockers), cyanoacrylate glues and other aggressive ...

See the other products
DAV TECH Srl
thermal insulation tape
thermal insulation tape

2000°F / 648°C Continuous Exposure: Higher Intermittent woven ceramic tape woven ceramic tape protect Motorcycles, Performance Headers, Turbo systems and many more applications Ceramic Fiber Provides Better Heat Resistance than ...

See the other products
Ningguo BST Thermal Products Co.,Ltd
self-fusing tape
self-fusing tape

These are Self-fusing silicone rubber tape manufactured by Ningguo BST Thermal Products Co which is made from a 100% high performance silicone elastomer. Its component on its silicone enables it to permanently bond to itself when being ...

See the other products
Ningguo BST Thermal Products Co.,Ltd
thermal insulation tape
thermal insulation tape
25 - 200 mm

1500°F / 815°C Continuous Exposure: Higher Intermittent High Temperature Vermiculite Coated Fiberglass Tape This high temperature, heat and flame resistant thermal insulating High Temperature Vermiculite Coated Fiberglass Tape will ...

See the other products
Ningguo BST Thermal Products Co.,Ltd
hot-melt application head
hot-melt application head
vmGenesis

vmGenesis® Electric Applicators have been specially designed to work with the high viscosity adhesives typically present in the hygiene disposable product manufacturing processes. vmGenesis® modules are electrically operated, which ...

See the other products
Valco Melton
cold glue dispensing machine
cold glue dispensing machine
BoardRunner®

The Contact BoardRunner’s patent-pending technology creates a non-linear force curve that takes weight off the valve which allows the glue applicator to adjust seamlessly with the board. Air delivered through a cylinder provides a virtually ...

See the other products
Valco Melton
cold glue dispensing machine
cold glue dispensing machine
3NC

The new 3NC Tri-Valve non-contact glue station offers 'touch less' control of glue patterns and a built-in tip sealer for perfect restarts. The improved tip-sealer design prevents nozzle plugging during periods of down time, and the tip ...

See the other products
Valco Melton
digital dispenser
digital dispenser
DX-250

The DX-250/255 series controllers are economical, highly precise and repeatable. They are equipped with a digital timer and an continuously adjustable vacum suck-back, to prevent dripping of low-viscosity media and high viscosiy media ...

felt thrust pad
felt thrust pad
317 series

"Adhesive felt pads. Can be used on the base of feet or inserts for smooth movement over floor surfaces. Round from diameter 10,0mm to 70,0mm and rectangular/square from 20x30 up to 100x100"

thermal insulation tape
thermal insulation tape
025 series

"This premium insulating tape is appropriate for electrical insulation, cable loom production, the protection of low and medium voltage cable splices and for colour coding. The tape provides an excellent resistance to abrasion, corrosion ...

UV curing system
UV curing system
6120 STM TETRA

TETRA LED ultraviolet and infrared curing system by Asco 3 - TecoPoint The 6120 STM TETRA LED is a drying system that allows you to treat both infrared and ultraviolet curing products. Its UVA LEDs drastically reduce time and energy ...

laminating film
laminating film
PP##

Crystal clear laminating film provides additional surface protection and enhances label appearances. Moderate adhesion and good flexibility. Offering protection against abrasion, fading and moisture. Glossy and matte types are available.

See the other products
Symbio, Inc
automatic dispenser
automatic dispenser
DynaBox

The ELECTROCLASS SupplyPoint automatic vending machine is the secure distribution range solution for: • Managing your references optimally • Simplifying and securing distribution of all your sensitive references • Preventing stockout This ...

automatic dispenser
automatic dispenser
902

Is a mobile trolley ,in painted metal. Indicated for masking-paper rolls. Suitable for all grams, is made for 6 rolls of masking paper with a max. width of 85 – 60 – 45 – 30 – 10 cm. Equipped with automatic tape dispenser, a device for ...

mesh tape
mesh tape
C Series

Mesh tapes are mostly designed for shielding and grounding for electrical and electronic cable assemblies. This product is realized with many different combination of knitting options, wire materials and sizes. Mesh is manufactured as ...

rotary drum mixer
rotary drum mixer

Engine power: 3 kW - 5.5 kW

Metered feeding of spices and mixing into the product Advantages • optimal distribution of the spices and mixing into the product Mode of operation The goods are moved inside a rotating drum by continuous mixing profiles. The ...

underfill adhesive dispensing machine
underfill adhesive dispensing machine
GS600SW

GS600SW Wafer-Level Dispensing Machine For Wafer Form Underfill GS600SW is a high-stability and high-precision wafer dispensing machine which is developed based on Underfill process requirements of RDL First WLP. The equipment meets ...

See the other products
Changzhou Mingseal Robot Technology Co.,ltd.
fully-automatic adhesive dispensing machine
fully-automatic adhesive dispensing machine
FS600 series

Online Visual Dispensing Machine FS600 Series FS600 series fully-automatic dispensing equipment is a high-speed, high-precision and cost-effective online dispensing system which is developed based on the needs of industries such as ...

See the other products
Changzhou Mingseal Robot Technology Co.,ltd.
needle dispensing valve
needle dispensing valve
KSV1000

KSV1000 series is a screw valve for quantitative conveying and dispensing of media containing particles and medium and high viscosity media. The valve body can be provided with screws of different specifications to cover applications ...

See the other products
Changzhou Mingseal Robot Technology Co.,ltd.
glue dispensing machine
glue dispensing machine

Adhesives, Putties & High Viscosity Materials Glues, adhesives and other high viscosity materials often need to be sprayed in uniform, regular layers. Their viscosity is one delicate factor to be taken into consideration. Matrasur ...

digital dispenser
digital dispenser
C25

Electronic dispenser for gummed paper with a maximum width mm 100. ELECTRONIC DISPENSER FOR GUMMED PAPER MOD. C25 LPMT New model with electrical drive, heater, control circuits and control all direct current at 24V. Rugged construction ...

electronic tape feeder
electronic tape feeder
FPX-800P

ELECTRONIC HUMETTING MACHINE FOR GUMMED PAPER MOD. FPX-800P Electronic wetting machine for gummed paper complete with 1600 ml water tank. equipped with anti-emptying valve, step-by-step motor for dragging the paper, electronic length ...

needle dispensing valve
needle dispensing valve
DZ_60

multifunction valve DZ_60 DZ_60SV spray valve • flat or roundspray • stainless steel • nozzle siz 0,2 - 1.8 mm DZ_60K Dosierventil • dispensing valve • different • various outlet components, brushes, needles • stainless steel

UV LED curing system
UV LED curing system
KEOL-LED8

UV / LED surface insolation lamps homogeneously cure the bonding surfaces within seconds. Surface insolation lamps are particularly suitable for fully automated production lines and allow cycle times in production processes to be reduced, ...

UV curing system
UV curing system
KEOL-TUV 236

The UV / LED conveyor is used for the curing of UV photosensitive adhesives, in line production for medium to large series. After application of the UV adhesive by a robot for depositing on the line, the adhesive parts are placed at ...

cold glue dispensing machine
cold glue dispensing machine
GTE-13/S&M

The GTE-13S and GTE-13M single and modular applicators can operate at the highest speeds. These non-contact electromagnetic guns can reach 210 m/min when working in dot mode. Technical Features ■ Extra high speed production ■ Top technology ...

See the other products
ERO Gluing Systems
hot-melt glue dispensing machine
hot-melt glue dispensing machine
GTE-112H

■ Maximum speed: 300 cycles per second ■ Maximum speed: 300 cycles per second ■ High thermal conductivity material ■ Dot distribution mode for glue savings ■ Slides for automatic cleaning nozzles ■ Ceramic sphere and nozzle GTE-112H ...

See the other products
ERO Gluing Systems
cold glue dispensing machine
cold glue dispensing machine
ERO-GTE 153

Designed for high-speed machines, the non-contact applicator type ERO-GTE 153 can reach speeds of up to 300 m/min. Its compact size allows an easy installation in narrow spaces. It fits in almost any machine. Made of stainless steel, ...

See the other products
ERO Gluing Systems
Kevlar® tape
Kevlar® tape
TK

Composition •TK: Braided or woven Kevlar tape •TV: Woven E glass fiber tape •TPNR : Polyester tape non shrinkable

fiberglass tape
fiberglass tape
TV

Composition • TK: Braided or woven Kevlar tape • TV: Woven E glass fiber tape • TPNR : Polyester tape non shrinkable

polyester tape
polyester tape
TPNR

Composition • TK: Braided or woven Kevlar tape • TV: Woven E glass fiber tape • TPNR : Polyester tape non shrinkable

reinforced concrete anti-corrosion product
reinforced concrete anti-corrosion product

Zinc Anode Activation Paste for concrete and dry environments Zap is a paste which is developed specifically for galvanic zinc anodes when applied in dry environments. Zap keeps the zinc surface moist and active as it contains a unique ...

See the other products
Metalnastri
reinforced concrete anti-corrosion product
reinforced concrete anti-corrosion product

Zinc Sheet Anode or ZincLayerAnode (ZLA) is a sacrificial galvanic anode specifically designed for giving electrochemical protection, known as cathodic protection, for the prevention of corrosion of the concrete steel reinforcement. It ...

See the other products
Metalnastri
zinc sacrificial anode
zinc sacrificial anode
GSC SuperAnode

Galvanic Anodes for cathodic protection of steel in concrete The Galvanic Anode protection systems utilize sacrificial anodes that naturally generate an electrical current to mitigate corrosion of the reinforcing steel. Zinc has a ...

See the other products
Metalnastri
stainless steel melter
stainless steel melter

Melter and Mixers, conceived originally as machines for the preparation and heating of water or oil phases, when equipped with an adequate mixing system are turned into real preparation unit for products that do not require vacuum processing. Stainless ...

See the other products
Dumek
UV curing system
UV curing system
BE 35 BETC

Application: For uv curing of conformal coatings and solvent-free thick film lacquers on pcbs or other 3D objects such as: uv thick film lacquers TWIN CURE ® from Peters Lackwerke or Dymax Corp. and other uv products. Design: PFT-conveyor ...

See the other products
Beltron GmbH
UV curing unit
UV curing unit

Application: Applications of the UV-chamber are numerous. Besides the standard tasks such as curing and glueing, the chamber may be used for material testing and radiation for chemical and biolegical applications. Design: UV exposure ...

See the other products
Beltron GmbH
UV curing unit
UV curing unit

See the other products
Beltron GmbH
thread repair kit
thread repair kit
KFS-20

KFS-20 Brushless Electric Driver CT5420 - Includes Power Adapter The KFS-20 Electric Driver (CT5420) was designed with strategically located external threads that make using the KATO Prewinder Adapter possible. When used with the ...

See the other products
KATO Fastening Systems
hot melt glue melter
hot melt glue melter
VSB 40

The VSB 40, manufactured by Reka, is a premelting tank that has a maximum melting temperature of approximately 150 °C. It has a weight of 11 kg, a power supply of 230V (50 Hz) or 120V (60 Hz) on request and a power consumption of 800 ...

glue dispensing machine
glue dispensing machine
DE1

Electro Pneumatic Dosing Unit (time-pressure) for anaerobic and cyanoacrylate adhesives. Including control unit, reservoir (with empty level sensor), valve, dosing nozzle, actuated by foot switch or metal part sensor. Suitable for PLC ...

See the other products
Loxeal
hot melt glue application head
hot melt glue application head
BBHF400AA-01-01-050

Filter application head BBHF400AA-01-01-050 can be use for Dot or bead. The head is supplied with a module BB400AA. The head is 50 mm wide. A filter is integrated in the head. A solenoid valve controls a module. Nozzle and solenoid valve ...

hot melt glue application head
hot melt glue application head
BBH400-01-01-040

Application head BBH400-01-01-040 can be use for Dot or bead. The head is supplied with a module BB400. The head is 40 mm wide. A solenoid valve controls a module. Nozzle and solenoid valve are not included

exhibit your products

& reach your clients in one place, all year round

Exhibit with us