|
|
| Products 121 to 150 of 244 |
|
Water-mixable Kühlschmierstoffe of oelheld are united in the highly developed product row AquaTec. Over 120 years experience to investigate quality consciousness and the urge new distinguish these products. AquaTec runs successfully with numerous machine manufacturers world-wide.
|
|
Description
High performance mineral oil-based micro-emulsions for extended tool life and superb surface finish.
Unique biological concept delivers long term stability without the need for tank side biocides.
Blaser’s best for all around performance, stability, safety and ease of use.
Available for hard or soft water in low to non-foaming varieties.
All versions available with or without chlorinated additives.
Applications/Properties
Universal for machining & grinding of ferrous and non-ferrous materials.
Well suited for heavy duty and difficult operations such as deep hole drilling, broaching, reaming, creep-feed grinding & high speed machining.
|
|
All cooling lubricants for feeder blades have following properties:
- long feeder blade life
- no attack on aluminium
- no gumming or resinification
- excellent cooling effect
- very good resistance to hard water
- highly economical consumption
|
|
Description
Synthetic, water-miscible, mineral oil free cutting fluid for grinding. Good
rinsing behaviour keeps grinding wheels and machines clean.
Efficient corrosion protection even at low concentrations, good settling
behavior.
Liquid tool® consists of a unique mix of state-of-the-art products (cutting oils and cutting fluids) application and consulting know-how laboratory, customer and training services
|
|
Description
Vegetable oil-based micro emulsion for superior performance.
Blaser’s best for the most difficult operations and surface tolerance requirements.
«If Vasco cannot do it, no water miscible cutting fluid can.»
Available with or without chlorinated or sulfurized additives.
Applications/Properties
All ferrous and non-ferrous materials.
Ideally suited for the most demanding machining & grinding applications.
|
|
All ACMOS Release Agents are building a film on the mould surface. These films are water-soluble.
We recommend to prime the moulds with ACMOSAN P 82-4 before starting work with the film forming Release Agents. ACMOSAN P 82-4 should be served up equable and accurate with a tag onto the moulds. Afterwards it can be polished. ACMOSAN P 82-4 gains the wetting power of the mould surfaces. If there are remainders of silicones, fats or oils which could irritate the equal wetting power of the film forming Release Agents, they will be neutralized by ACMOSAN P 82-4.
|
|
External solvent based semi-permanent mould release agent .
MOULEX® 365GL laying forms a thin film on the mould surface for easy and multiple releases.
Advantages
High gloss finish.
No self releases.
Multiple releases before new application.
Small consumption: thin layer coating.
Coating supports temperatures up to 450°C.
Properties
|
|
|
Departure release agent has been specifically formulated to meet the high performance requirements of the Advanced Composites industry by providing consistent, effortless releases without buildup on the tool. Departure is a versatile, non-hazardous polymer that chemically bonds to the tool surface.
|
|
|
The new system, consisting of cleaner, sealer and release agent, guarantees an optimally balanced surface pre-tratment for the production of composite moulds and parts up to 150°C processing temperature.
|
|
|
ROTOSHIELD is specially formulated to meet the unique demands found in today’s rotational molding environment. Designed to maximize process efficiency, ROTOSHIELD’s non-flammable and non-toxic properties make it safe to use on hot tools without interrupting existing cycle times and without the need for a bake cycle. The rapid cure formulation provides multiple de-moldings between applications and reduced scrap rates from sticking or warping.
|
|
MOULEX® 100 is an external semi permanent release agent. It is free of silicon oil and allows many releases without touching up. In addition it is highly resistant to abrasion and profits from a high gliding effect.
MOULEX® 100 is ready to be used and allows obtaining a thin release coating without transfer to moulded parts. Due to its composition it also reduces mould fouling.
Advantages
Free of silicon oil.
High gliding effect.
Highly abrasive resistant.
Does not transfer to moulded part.
|
|
|
Pure silicone compound. Formulated to maximize release effect when used on molds. Its extreme anti-sticking properties make release quick and complete. Reduces sticking of parts in molds. Used to produce a slick finish which resists dirt. Parteze is highly repellent to oil, water, and is heat resistant. Valuable as a water repellent for most porous surfaces, such as concrete, wood, rubber, linoleum, etc. Use on molds, putty knives, trowels, hand saws, and planes, lawnmower blades, plows,boots, etc. Anywhere extreme anti-sticking properties are useful.
|
|
for moulds and tools
helps to prevent flaws on orifices and neck joints. It does not contain any heavy metal compounds such as molybdenum disulphide.
ACMOS 40-26
Mould release paste based on graphite and mineral oil for blank moulds with excellent flow and wetting properties on the hot mould. The release paste is suitable for I.S. machines.
ACMOS 48-405
Mould release paste for finished moulds with excellent flow and wetting properties on the hot mould. Clean combustion and low fouling are ensured.
ACMOS 48-141
|
|
High lubricating power for this lithium grease with high MoS2 content, NLGI 2 grade.
It has a high drop point. ISO 140 is anticorrosive and anti-wear, it solves heating problems by spacing out lubrications.
Can be used from -20°C to 150°C.
Applications:
- All movements, including high speeds.
- Surfacic tribo-contacts: plain or pivot bearings, journals, endless screws, guidance system, slides.
- Hertzian tribo-contacts: ball race bearings, roller bearings, tapered bearings, needle bearings, rollers
|
|
|
Sprays dry, smooth surface of Molybdenum Di-Sulfide. Adheres to any hard surface for excellent dry lubrication under severe pressure conditions. For use in temperatures from -100 degrees F to 600 degrees F. Used on slides of all types.
|
|
No matter what your industry – Food and Beverage, Chemical, Industrial Assembly – we have the exact products and services to support your business. A lubricating grease is a semi-solid product of the dispersion of a thickening agent in a liquid lubricant. The lubricating grease operates by releasing the lubricating fluid from the thickening agent and provides a way to supply a lubricant where the use of oil is not practical.
Molykote® high performance greases are designed and tailored for use under extreme conditions like extreme pressure, harsh chemical environment, low and high temperatures and all speeds. Molykote greases are based on mineral oils or synthetic fluids including silicone oils. A number of Molykote greases contain special additives and/or solid lubricants like Molybdenium disulfide to provide effective lubrication
|
|
|
|
|
|
Lubricate containing components of vegetable origin
LUBRICATE BIO+ is containing oils and of vegetable esters which fulfill the requirements of the Ecolabel regulation.
Respecting the environment and developed starting from raw materials resulting from renewable bases, LUBRICATES BIO present of excellent performances of biodeterioration and nontoxicity.
Very adhesive, resists the washing out perfectly
Good pressure resistance, with shearing, shocks and vibrations
Is appropriate for the lubrication of any machine parts
Usable on axes, bearings, stages, slides, rollers, chains, gears
Aerosol 650/400ml
CLEANING BIO, cleaning it degreasing future!
Especially developed to replace traditional solvents of petrochemical origin, CLEANING BIO is a powerful cleaning fluid/biodegradable grease-remover containing aqueous solution. Not having any environmental impact or medical, there allows the cleaning of all metal parts and remains compatible with the majority of the plastics and elastomers, CLEANING BIO does not deteriorate the supports, reduced the pollutant emissions and takes an active part in the behavior "éco-citizen".
Without odor.
Without COV.
Not poison, nonharmful, not irritant.
Easily biodegradable.
Non flammable.
Product usable in all positions (upside down).
Aerosol 650ml
|
|
|
|
|
|
Magnalube®-G deposits a fine protective and lubricating film on metal parts. It is virtually unaffected by corrosive moisture and will not migrate from hot surfaces. Magnalube®-G is water resistant, stable at high temperatures, resists oil separation, and is chemically and mechanically stable.
The unique properties of Magnalube-G make it the grease that lubrication engineers trust in sensitive applications.
Magnalube-G has a variety of applications and is truly designed for use in any situation. The high quality of Magnalube-G is never wasted on an application that may typically require lower-grade grease. The energy savings and machine part protection that arise in sensitive applications are not lost in other applications. Here is a list of a few of the many applications that Magnalube is specially designed for:
Gears, Bearings & Jack Screws
Actuators
Brake Calipers
Computer Components
Construction Equipment
Railroad Couplings
Die-casting Machines
Electric Motors
Electric Switches
Gaskets
Hydraulic Equipment
Laser Equipment
Medical Devices
Mold Release
Office Business Machines
Pneumatic Cylinders
Pumps
Railroad Engines
Seals, Valves & Gaskets
Tools
Trucks & Trailers
Valves
|
|
|
Even in the present "High-tech age" problems due to friction and wear are a matter of course in a lot of in-dustrial sectors. Extensive repairs, longer downtimes, shorter maintenance intervals and lower serviceable lives of plant and equipment are the consequence and cause enormous costs each year. Modern high-performance greases for lubricating, separating and protecting are increasingly gaining in significance.
|
|
ETERNA 2000 is a high performances machining fluid which can be
recycled. It is general-purpose (all raw materials, all types of machining), ISO classification: MAH. Soluble fluid of machining, standard true
solution, of particularly advanced design and technology. Product
answering the Eco-design label. Guaranteed without nitrites,
borated derivatives, organochlorinated, sulphur derivatives and heavy
metals. ETERNA 2000 is chemically and biologically stable,
ultrafiltrable, reusable. The very high cooling capacity of ETERNA 2000 allows to obtain state surface of high quality in the roughing or finishing operations. Its stability and its weak retention on pieces and chips allow an important reduction of machining fluids consumption. Not foaming,
anti-corrosive, not gumming, ETERNA 2000 also makes it possible to
obtain an environment of clean working station (produced without
mineral, vegetable or synthetic oil).
|
|
Réducteur Biodégradable F 10 is a a new generation penetrating fluid with multi uses properties: Penetrating fluid, deoxidizing, anti-humidity, lubricating agent, degreaser, tar remover, boiler cleansing compound, diluting agent for inks, anti-resin, coating and mastic cleaner.
Biodegradable, it is free from VOC (Volatile organic compounds) and non flammable.
Moreover, it is compatible with the majority of supports.
|
|
FUCHS LUBRICANT proposes a broad line of goods of lubrication on mineral or synthetic basis, additivés extreme pressure for the gears, having high characteristics of adhesiveness for the slides, allowing a good lubrication and désémulsion for the movements and turbines.
Fuchs also offers a broad oils compressors range for all types of materials and a very complete refrigerating oil range for the various systems and refrigerants.
|
|
|
Molykote® hydraulic oils minimize formation of emulsions in contact with water due to the purity of the base fluid. They will generally perform successfully in hydraulic systems far longer than conventional hydraulic oils. Plants can gain significant savings from reduced oil consumption, reduced disposal cost, labor savings and fewer interruptions to production. These non-toxic oils are derived from hydrocracked or synthetic base stocks and can be used in systems designed for low pour point or high flash point mineral oils.
|
|
RUBRIC Anti oxydation.
RUBRIC HM Anti-wear. Excellent thermal and chemical resistance. All types of hydraulic systems where an anti-wear oil is recommended.
ISO Grades available : 32, 46, 68, 100.
RUBRIC HV Anti-wear. High viscosity index, excellent thermal and chemical resistance. Hydraulic systems enduring great temperature variations.
ISO Grades available : 32, 46, 68.
RUBRIC LX High Performance - Anti wear, zinc free.
|
|
|
Molykote® dispersions are finely dispersed solids or other lubricants suspended in lubricating fluids. They are preferred where it is necessary to apply solid lubricants in liquid form to units in operation or to otherwise inaccessible points. Some dispersions serve as antiwear and extreme pressure additives for lubricating oils like gear and engine oils.
|
|
The ALL WAY SUPER DEGRIPPANT is a mixture of hydrocarbons and light oils, with antirust agents.
It is especially designed to ensure the releasing of all parts or sets.
|
|
Penetrating Fluid
Ref: DGT400
Grease prevents squeaking in mechanical assemblies, e.g. locks, hinges, etc
Ideal for breakdown and maintenance services
Penetrates and lubricates mechanical parts
Produces a highly water resistant film, providing long term corrosion protection
|
|
Loosens Frozen Metal Parts!
An industry proven penetrating oil that has no equal. Quickly loosens
rusted nuts and bolts - frees frozen shafts, pulleys, etc. Penetrates to 1
millionth inch spaces, dissolves rust, lubricates, cleans and prevents rust.
Displaces moisture. The oil that creeps. Used by 480 of the Fortune
500 companies!
|
|
Nonflammable CO2 propellant
Displaces moisture
High flash point of 175° F (79° C)
More usable contents per can
Protects against corrosion
Loosens rusted or frozen parts
Excellent protective coating for power/hand tools
Does not contain CFCs, chlorinated solvents or
silicones
Authorized by the USDA for use in federally
inspected meat and poultry plants
Nonconductive
Safe on fabric, plastic, rubber, paint and other finishes
Plant Engineering 1995 Product of the Year
Inverta Spray Valve lets you spray in all directions
|
|
Multi-functions Ultra
Five functions in one : fights off humidity and corrosion, lubricates, cleans and frees rust
Resist the extreme temperatures (- 40°C +200°C).
Net volume: 500 ml
|
|
|
|
Lubricants, Greases
