|
|
|
This is a high-visibility, foaming action cutting fluid with the proprietary additive EP-X3® for extreme performance on the hardest metals – even those up to 45 RC. The high-visibility foam allows you to conveniently gauge application rate and fluid presence. Clinging action stays with the tool longer. Eliminates work hardening.
|
|
|
Fuchs Lubrifiant France proposes a lubricants range specific to the operations of cold deformation of metals: cutting, stamping, shaping, swifting, hydrospinning, striking...
|
|
Our shaping oils from the rows dia.-press and dia. CUT are chlorine and heavy metal-free high speed lubricants for punching and shaping processes of each degree of difficulty.
Selected basis oils and additives form mechanically and thermally extremely sturdy lubrication films with high printing pressure for optimal flow of material and small wear of tools.
|
|
|
|
|
|
Molykote® synthetic oils are produced through chemical synthesis to meet targeted performance specifications and to minimize impurities. Synthetic oils are formulated with new generation performance-enhancing additives. Molykote mineral oils are produced in a series of proprietary hydroprocessing steps, which ensures that they are nearly free of contaminants. Synthetic blends are comprised of synthetic and hydroprocessed mineral oil base stocks. All oils in this section are available in pails
and drums.
Molykote® gearbox lubricants help prevent wear and process interruptions in power transmission systems and components. Compared to conventional oils they also offer greater resistance to oxidation and stable performance at high temperatures and under high loads. Molykote gearbox oils maximize fill intervals and maintain viscosity characteristics at wide temperature ranges. Molykote gearbox oils meet AGMA 9005-E02. In addition to AGMA, Molykote L-21XX series gearbox oils also meet DIN 51 517 Part 3, US Steel 224, Flender, Cincinnati Machine, David Brown SL.53.101.
|
|
SUPRACO MPL Gears, multipurpose. Enclosed gears and loaded circulating oil, wheel and worm reducers.
ISO Grades available : 100, 150, 220, 320.
GEAR SY
|
|
The unique properties of Magnalube-G make it the grease that lubrication engineers trust in sensitive applications.
Magnalube-G has a variety of applications and is truly designed for use in any situation. The high quality of Magnalube-G is never wasted on an application that may typically require lower-grade grease. The energy savings and machine part protection that arise in sensitive applications are not lost in other applications. Here is a list of a few of the many applications that Magnalube is specially designed for:
Gears, Bearings & Jack Screws
Actuators
Brake Calipers
Computer Components
Construction Equipment
Railroad Couplings
Die-casting Machines
Electric Motors
Electric Switches
Gaskets
Hydraulic Equipment
Laser Equipment
Medical Devices
Mold Release
Office Business Machines
Pneumatic Cylinders
Pumps
Railroad Engines
Seals, Valves & Gaskets
Tools
Trucks & Trailers
Valves
|
|
Sapphire Hi-Torque is a broad range of high performance gear oils. Designed to extend gearbox life, all contain the advanced SuPs system to ensure maximum protection on start up. Available as ISO VG 100, 220, 320, 460 and 680 grades, all contain extreme pressure and high load additives to protect the gearbox from wear and shock loads while being highly thermally stable and low foaming.
- Temperature range -20 to +120°C.
|
|
Lubricants for HOLLOW GLASS:
- Soluble lubricants for shear spray and for the “delivery system”
- Neat oils for “delivery system”
- Dual-component product for the dry “delivery” coating
- Graphited varnish for mould lubrication
- Lubricants for SWABBING
- Oils for conveyor belt chains
Lubricants for FLAT GLASS:
- Neat oil for cutting
- A complete range for edge grinding
- Solutions for water treatment problems.
And also a complete range of maintenance products oil and greases “mineral and synthetic”
CONDAT always develops new products that respect the environment and that follow the latest European regulations (REACH, Biocides).
Beyond furnishing lubricants, CONDAT makes a commitment to develop a partnership with its customers and offers them a complete service (analysis of products and water, environmental advice, assistance concerning regulatory information,…) and suitable equipments (dosing units, oil separator,…).
|
|
|
GTP600 is a high purity graphite paste which outperforms any conventional lubricant. When tightening bolts and nuts, using GTP600 will ensure low and uniform friction conditions, making it possible to utilize the bolts’ full capacity.
|
|
|
Provide a smooth surface of high-grade graphite. Adheres to metal for long lasting lubrication under extreme pressure, temperature, and weather. Excellent where dusty or dirty environments make oil lubricants ineffective.
|
|
Lubricating Grease - Available in different order quantities - pls contact for more info
KYODO YUSHI MOLYWHITE RE NO.00 16KG
A lithium grease consisting of synthetic hydrocarbon oil and refined mineral oil and treated organic molybdenum compound. MOLYWHITE RE No.00 has extreme pressure characteristics and excellent wear resistance. NLGI grade No.00 provides for flow into a complexed lubrication of the reduction gear, which improves efficiency and prolongs performance life.
KYODO YUSHI MULTEMP LRL NO. 3
Long-life low-noise grease usable over a wide working temperature range.
Contains special synthetic oil stable even at high-temperatures: offers considerable extension of grease refilling interval
Application : Sealed bearings for precision machine, etc.
KYODO YUSHI 300G TUBE PS NO. 2 GREASE
Synthetic oil having low temp propoerties & lubricity.
E-Mail sunil@bocabearings.com
|
|
A comprehensive range of greases for maintenance of industrial equipments, with various properties:
- conductive,
- biodegradable,
- food-grade greases,
- lubrication at low-temperatures,
- high speeds…
This range aims at all kind of industries : construction industry, sand and gravel quarries, steel industry, paper manufacturing, transport, agriculture, food processing, energy, automotive,…
|
|
No matter what your industry - Food and Beverage, Chemical, Industrial Assembly - we have the exact products and services to support your business. A lubricating grease is a semi-solid product of the dispersion of a thickening agent in a liquid lubricant. The lubricating grease operates by releasing the lubricating fluid from the thickening agent and provides a way to supply a lubricant where the useof oil is not practical.
Molykote® high performance greases are designed and tailored for use under extreme conditions like extreme pressure, harsh chemical environment, low and high temperatures and all speeds. Molykote greases are based on mineral oils or synthetic fluids including silicone oils. A number of Molykote greases contain special additives and/or solid lubricants like Molybdenium disulfide to provide effective lubrication
|
|
Our range of greases answers the most varied industrial applications: multipurpose greases for mechanics or the agro-alimentary one, greases high temperature, greases in wet medium, greases fluorinated for hostile environment, greases with solid lubricants...
Our greases profit from homologations of the largest European manufacturers in all the branches of industry.
|
|
SILICONE GREASE allows the lubrication and the assembly of any moving system.
Eliminate wedging and squeaking from any part.
Anti-wear and anti-corrosive.
Excellent thermal conductibility.
Preserve and protects metal sets and tools.
Usable on any surface and any materials (elastomers, rubbers, plastics).
Does not dry at temperatures from -40°C to 300°C.
Recommended for the heads of taps, locks, hinges, chains, electric connections and cables.
Does not try, of translucent color
JELT SILICONE GREASE ref.005051 Aerosol 650 ml
|
|
For the most demanding applications, you need the type of innovative greases that the Mobil brand is famous for. Our Mobilith and Mobilgrease families offer the performance you need and expect from a leader in lubrication technology.
Our innovative slate of greases includes both synthetic and mineral oil products. In fact, Mobil actually began the synthetics revolution with grease! Mobilgrease 28 was invented to lubricate the wheel bearings of the US Navy´s carrier-based aircraft fleet that was subjected to temperature extremes.
Today we´re supplying the world with high performance greases for some of the most demanding applications. We have continued innovating and producing high performance Mobil greases for all types of industrial, commercial vehicle, and automotive applications.
|
|
Magnalube®-G deposits a fine protective and lubricating film on metal parts. It is virtually unaffected by corrosive moisture and will not migrate from hot surfaces. Magnalube®-G is water resistant, stable at high temperatures, resists oil separation, and is chemically and mechanically stable.
The PTFE base effectively lubricates at temperatures +600° F to -50° F. The applications are unlimited. Magnalube is the multipurpose specialty lubricant that industrial engineers can trust.
|
|
|
An assortment of lubrication associated products is available to maintain sufficient lubrication of machines.
|
|
ThermaPlex® Aqua Bearing Grease
Excellent resistance to fresh and
salt water
Resists water washout
Good adhesion properties
Excellent corrosion resistance
Significant load carrying capability
Reduces wear
Reduces grease consumption
Greater degree of bearing protection
Appearance: Amber colored paste
Odor : Petroleum odor
Temperature Range: -4°F (-20°C) to 302°F (150°C)
Dropping Point: 500°F (260°C)
NLGI Grade: No. 2
Timken "OK" Load: 45 lbs.
|
|
Specified grease
The CG2 grease is low-dust-generation grease having more excellent lubrication performance and anti-corrosion capacity than conventional vacuum grease and also available in a wide temperature range of -40C to 200C.
|
|
The choice of the correct sharpening oil depends on the respective process factors. However a conscientious preselection can fundamental be met. Since Polyalphaolefine are synthetically manufactured basic oils, they have an unsurpassed purity and are characterized by their high stability.
Provided with successfully tested active substance combinations develop in such a way oils, which emphasize themselves by their versatility and quality.
|
|
Description
Low viscosity grinding oils based on Hydrocracked base oil technology
Low misting, high flashpoint and excellent settling properties.
Applications/Properties
Ideal for CNC grinding of carbide and high speed steel.
|
|
Heat and surface treatment
The composition of steels, the geometric shape of the workpieces, their dimensions will require a particular treatment process depending on the required mechanical properties.
The heat treatment installation will impose a type of fluid and constraints of application (temperature of use, speed of circulation of the fluid, etc.).
To meet the largest possible number of treatments, Motul TECH offers a complete range of products: mineral oils, synthetic oils, aqueous synthetic fluids.
Advantages of THERMIC
* Limitation of losses by carry over
* Less distortions
* Limitation of the risk of shrinkage cracks
* Pronounced anti-oxidant character
* Constant quenching power
* Limitation of fire risks
* Large broad cooling range
* Easier washing
|
|
Leader of the specialities of lubrication, FUCHS LUBRICATING fulfills the requirements imposed by Hardening, thanks to a specific range including/understanding:
Oils froides*, semi-chaudes* and chaudes*,
Oils for vacuum ovens *,
Aqueous fluids at polymeric base, for case or mass Hardening,
... and a personalized analytical follow-up of its fluids
in service to guarantee performances and longevity.
*: at speed of standard or accelerated cooling
|
|
Multi-purpose lubricating and separating paste. APPLICATION: Screw and plug connections, especially for stainless steel, seals, flanges, guideways. Branches: power plants, glass industry, chemical and petro-chemical industries, construction and mechanical engineering.
Advantages:
* Good lubricating and separating properties
* Prevents welding and scaling
* Reduces friction and wear
* Prevents fretting corrosion
* Economical in use
* Especially suitable for stainless-steel threaded connection
* Temperature range: - 30°C to + 1.180°C
|
|
Fully synthetic, solid free special grease for long-term lubrication of ejector pins, slides, folding units, latch locking units as well as all sliding surfaces in plastic injection moulding tools up to + 300°C as well as aggressive atmosphere.
Advantages:
* NSF H1 Reg.
* Resistant against aggressive plastics condensate
* Stays in place, no transportation of the grease on to the injection-moulded parts
* Packing of the injection-moulded parts without extra cleaning
* High output (shot) numbers without re-lubrication
* Neutral behaviour against common elastomers and plastics
* Outgassing substances do not provoke stress cracking corrosion (DIN 53449)
* Temperature range: - 30°C to + 300°C
|
|
OKS 420
High-Temperature Multipurpose Grease
Roller and friction bearings, slow-running gears and chains at high temperatures, impact and pressure loads or water influences. Extremely impact and pressure-resistant. Good wear protection. Highly adhesive. For universal use at increased requirements.
|
|
|
|
|
|
ROCOL Aerospec 100 is a low temperature semi fluid aerospace grease which has been developed to meet the demanding requirements of today's aerospace industry.
ROCOL Aerospec 200 is a low temperature aerospace grease formulated by using a synergistic blend of synthetic esters combined with the ROCOL unique lithium complex soap thickener system.
ROCOL Aerospec 210 is a low temperature aerospace grease formulated by using a synergistic blend of synthetic esters combined with graphite and the ROCOL unique lithium complex soap thickener system.
ROCOL Aerospec 250 is a low temperature aerospace grease, formulated by using a synergistic blend of synthetic esters combined with MoS2 and the ROCOL unique lithium complex soap thickener system.
ROCOL Aerospec 300 is a long life, general-purpose bearing grease formulated using the latest lithium complex soap technology, for both the aviation and shipping industries.
ROCOL Aerospec 350 is a long-life, general-purpose aviation bearing grease formulated using the latest lithium complex soap technology and employing graphite as an anti-wear additive.
ROCOL Aerospec 400 is a long-life, multipurpose aerospace grease. Excellent high temperature performance. Additives enhance corrosion resistance, extreme pressure properties and oxidation stability.
ROCOL Aerospec 533 is a low temperature silicone based grease. Compatible with most plastics and rubbers, it is highly resistant to water wash out.
ROCOL Anti-Seize 797 is a stiff paste containing a blend of nickel and graphite and is designed to prevent seizure of threaded components that are subjected to high temperatures for long periods of time.
Fomblin OT20 is a perfluoropolyether based grease developed for use primarily with oxygen systems. It has been used with particular success on breathing apparatus, in such diverse areas as Ministry of Defense aircraft and sub-sea equipment as well as in operating theatres in hospitals.
ROCOL MHT is a non-melting grease, containing molybdenum disulphide and a low volatility mineral oil which ensures that the grease does not dry out at high temperatures.
ROCOL MT-LM Assembly and Running-in Paste is an assembly lubricant for all precision and interference fit parts, including plain bearings, pins, pistons, slides and gears etc.
ROCOL MX 33 is a lithium soap thickened, silicone oil based grease containing Molybdenum Disulphide.
ROCOL SBG 305 is a soft, black, lithium thickened grease which is designed for the lubrication of heavily loaded bearings, slides and similar mechanisms over a wide temperature range.
Synthetic lubricant which evaporates slowly without carbonising to leave a thin film of Molybdenum disulphide. Suitable for slow running bearings <300rpm operating at high temperatures. +180 to 300°C
HT70
|
|
|
|
|
|
The PTFE base effectively lubricates at temperatures +600° F to -50° F. The applications are unlimited. Magnalube is the multipurpose specialty lubricant that industrial engineers can trust.
In any High-Temperature/Low Temperature, High-Pressure or Extreme Pressure Magnalube-G will continue to lubricate by maintaining the protective barrier between surfaces.
Test Results
In high speed DMS at 250° F and 350° F Magnalube-G performed better than any other petroleum oil or grease lubricant. Here's a summary of exhaustive test results similiar to test data set done in Mil-G-23549 by the Dept. of Defense.
Description Method Requirement Results
Dropping Point ASTM D-566 450 Min. 458
Evaporation, 22 hrs. @ 350 ASTM D-972 7.0% 2.9%
Mean Hz Load Weld Point FTM-6503 50.0 Min. 60.5
Oil Separation, 24hrs @212 FTM-321 6.0% Max. 1.5%
Penetration, Cone (Worked) ASTM D-217 270-315 287
Penetration, Cone (Unworked) ASTM D-217 ---- 284
Penetration, Cone (Work-Stability-100,000 Strokes) GTM-313 ---- 305
Rust Preventative Properties ASTM D-1743 ---- Excellent
Water Washout Characteristics ASTM D-1264 ---- 0.86%
Wear Properties (Falex) ASTM D-2670 ---- Excellent at 1450 lb. Load
Wear, Gear FTM-335 ---- 5 lb Load-1.4 mg Wear/ 1000 Cycle 10 lb Load-3.2 mg Wear/1000 Cycle
|
|
|
|
Lubricants, Greases
