|
|
| Products 91 to 120 of 244 |
FLUID-setral-SHG 180 Synthetic machine oil for hollow glass ware
manufacturing machines (e.g. Emhart machines), up to +160°C
FLUID-setral-SHT series Synthetic oils for chains in drying ovens, varnishing
and coating machines, up to +250°C
COVA-setral-SE series Synthetic compressor oils for piston and rotary
compressors and vacuum pumps, > +100°C
COVA-setral-BIO 46 Synthetic, bio-degradable compressor oil
HYD-setral-HS 46 Semi-synthetic multi-grade hydraulic oil
HYD-setral-SE/HFD 46 EP Synthetic, fire-resistant hydraulic fluid,
bio-degradable, up to +150°C
SYN-setral-GEAR PG series Synthetic gear oils especially for worm gears as well
as heated equipment
COVA-setral-HS 46 Semi-synthetic compressor oil for screw compressors
|
|
Lubricants for PRESSURE DIE CASTING of aluminum alloys:
- release agents
- protective greases for ladles,
- piston lubricants,
- flameproof hydraulic fluids (HFC, HFD)
Lubricants for FORGING involving steel, aluminum, yellow metals and special alloys, this range includes:
- graphited oils,
- graphited aqueous solutions,
- white products,
- ceramics and coatings,
- solid lubricants.
Products for HEAT TREATMENT developed to ensure better cooling cycle control:
- Tempering oils
- Polymers
- Monitoring of products in service and on-site cooling capacity measurement.
|
|
|
FUCHS LUBRICANT proposes a broad hydraulic oils range of high performance additivées antioxidants, antiusure, anti-corrosive and improving of index of viscosity for the hydraulic equipment of systems of all types (machine tools, presses of cutting-stamping, press for injection plastic,...).
|
|
|
|
|
|
The Humble Hydraulic H Series oils are quality anti-wear hydraulic oils designed to meet the requirements of most fluid power systems. They exhibit good anti-wear properties that help reduce the wear rates in gear, vane and piston pumps. They also possess a high level of resistance to oxidation and thermal degradation that helps control the formation of system deposits. The Humble Hydraulic H line also has good water separation properties, rust and corrosion prevention, and foam resistance. They are formulated with high quality base oils and a performance additive system.
Features and Benefits
The Humble Hydraulic H Series oils provide good anti-wear protection reducing wear in pumps and actuators in open or closed-loop systems. Their high resistance to oxidation and thermal degradation helps reduce the formation of deposits and varnish. The Humble Hydraulic H Series offers the following benefits:
Good anti-wear protection improves pump life
High resistance to oxidation eliminates deposit formation and improves oil life
Good water separation properties allow easy removal of water from systems reducing potential damage to system components
|
|
Sapphire Hi-Power is a range of lubricating fluids uniquely suitable for use in both air compressors & hydraulic systems. Incorporating the L-CO system ensures low carry over of the oil in compressor systems. This results in a dryer air stream and longer compressor lubricant life. In hydraulic systems, the premium quality ensures the fluid does not generate deposits, sludge or varnish.
Available as ISO VG 22, 32, 46, 68 and 100; all grades are approved to the following specifications:
- DIN 51506 (VBL, VCL, VDL)
- ISO/DP 6521 (DAA, DAB, DAH, DAG)
- DIN 51524 pt 2/3 (HLP, HVLP)
- AFNOR NFE 48-603 (HM, HV)
- VDMA 24318
- US STEEL 126, 127, 136
- SPERRY VICKERS M-2950-S
- DENISON TP 02100
- Temperature range -20 to +120°C
|
|
Magnalube®-G deposits a fine protective and lubricating film on metal parts. It is virtually unaffected by corrosive moisture and will not migrate from hot surfaces. Magnalube®-G is water resistant, stable at high temperatures, resists oil separation, and is chemically and mechanically stable.
The PTFE base effectively lubricates at temperatures +600° F to -50° F. The applications are unlimited. Magnalube is the multipurpose specialty lubricant that industrial engineers can trust.
|
|
HiPure HLPD 68 is a purify-filtered zinc-free, paraffin-basic special oil with additives for the increase of ageing stability and for improvement of the
Gleitverhaltens. This product possesses excellent detergierende and dispersing characteristics. It draws further by an excellent
Corrosion protection behavior out.
|
|
Magnalube-G has a variety of applications and is truly designed for use in any situation. The high quality of Magnalube-G is never wasted on an application that may typically require lower-grade grease. The energy savings and machine part protection that arise in sensitive applications are not lost in other applications. Here is a list of a few of the many applications that Magnalube is specially designed for:
Gears, Bearings & Jack Screws
Actuators
Brake Calipers
Computer Components
Construction Equipment
Railroad Couplings
Die-casting Machines
Electric Motors
Electric Switches
Gaskets
Hydraulic Equipment
Laser Equipment
Medical Devices
Mold Release
Office Business Machines
Pneumatic Cylinders
Pumps
Railroad Engines
Seals, Valves & Gaskets
Tools
Trucks & Trailers
Valves
|
|
Magnalube®-G deposits a fine protective and lubricating film on metal parts. It is virtually unaffected by corrosive moisture and will not migrate from hot surfaces. Magnalube®-G is water resistant, stable at high temperatures, resists oil separation, and is chemically and mechanically stable.
The PTFE base effectively lubricates at temperatures +600° F to -50° F. The applications are unlimited. Magnalube is the multipurpose specialty lubricant that industrial engineers can trust.
|
|
Magnalube-G has a variety of applications and is truly designed for use in any situation. The high quality of Magnalube-G is never wasted on an application that may typically require lower-grade grease. The energy savings and machine part protection that arise in sensitive applications are not lost in other applications. Here is a list of a few of the many applications that Magnalube is specially designed for:
Gears, Bearings & Jack Screws
Actuators
Brake Calipers
Computer Components
Construction Equipment
Railroad Couplings
Die-casting Machines
Electric Motors
Electric Switches
Gaskets
Hydraulic Equipment
Laser Equipment
Medical Devices
Mold Release
Office Business Machines
Pneumatic Cylinders
Pumps
Railroad Engines
Seals, Valves & Gaskets
Tools
Trucks & Trailers
Valves
|
|
For machining operations:
- bar turning,
- turning,
- milling,
- drilling,
- boring,
- grinding,
- EDM,
- cutting / stamping
CONDAT has developed a complete product range for all metals ( steels, cast irons, aluminum, titanium...) :
- Soluble lubricants
- Neat oils
- Vanishing lubricants
- Protection products
- Degreasing agents
|
|
|
Water-mixable cooling lubricants of oelheld are developed for almost all ranges of application. AquaTec is characterized through humanly Technology, is called the products has special value for humans, nature and machine.
|
|
Magnalube-G has a variety of applications and is truly designed for use in any situation. The high quality of Magnalube-G is never wasted on an application that may typically require lower-grade grease. The energy savings and machine part protection that arise in sensitive applications are not lost in other applications. Here is a list of a few of the many applications that Magnalube is specially designed for:
Gears, Bearings & Jack Screws
Actuators
Brake Calipers
Computer Components
Construction Equipment
Railroad Couplings
Die-casting Machines
Electric Motors
Electric Switches
Gaskets
Hydraulic Equipment
Laser Equipment
Medical Devices
Mold Release
Office Business Machines
Pneumatic Cylinders
Pumps
Railroad Engines
Seals, Valves & Gaskets
Tools
Trucks & Trailers
Valves
|
|
Parting Paste
Moistening the centerdrill with our highly heat-resistant parting paste, matched to the respective material to be processed, is important for the life of the centerdrill. The paste can be applied manually or with a spray device.
Lubrication during thread forming
The use of our lubricant is highly recommended during thread forming. It should be applied before each operation on the centertap. Our lubricant is ecologically tested according to DIN.
For further details and more information, please visit our website.
|
|
|
|
|
|
Secure quality and solve problems
during production of transparent, white and black parts
Using a new special grease for ejector pins, bolts and
sliding elements, lubricating problems will become obsolete. Our recommendation for this area:
SYN-setral-INT/300
a life-time ejector-pin-grease which allows an extremely high number of rounds without re-lubrication and damage on tools. This, up to + 300 °C temperature-stable grease (without solids) is excellently suited for the production of transparent, white and black parts, items for the
pharmaceutical area, for multi-coloured and root-thread-tools, for sealing areas metal/metal and for "soft metal
pairings" (matching phase before hardening process).
Even tools designed for "dry running" can now be lubricated again without any problems (e.g. medical technology).
The thin high-performance lubricating film is extremely
stable against aggressive condensates and avoids grease transference via the ejector pins onto the plastic parts.
The advantages result in lower spoilage rates and increased life-time of tools.
Benefit from our experience. We would be pleased to advise you!
|
|
Food Safe Lubricant
Ref: FSL400
Excellent resistance to water and high temperatures
Excellent compatibility with rubber and plastics
Good temperature range -20 to 180
Highly tenacious
|
|
The FOODLUBE range is a comprehensive group of lubricants designed for the food & other clean industries. NSF H1 Registered as safe for incidental food contact, FOODLUBE is formulated using only FDA listed ingredients, and meets DIN V-10517, FDA Group 21 CFR 178.3570. Additionally, all FOODLUBE products are free from any GM, Soya, nut or nut derivatives; and mineral hydrocarbons.
FOODLUBE products have the superior performance you expect from ROCOL and are manufactured under strict BE EN ISO standards to ensure plant efficiencies across the site.
The comprehensive FOODLUBE range consists of industry leading lubricants covering Bearing Greases, Chain Lubricants, Gearbox Fluids, Hydraulic and Compressors Fluids along with a range of additional products covering all other lubricant applications. All backed up with the ROCOLcare premier service package supplying world class lubrication solutions for industry; FOODLUBE is the essential link in the food chain.
|
|
NSF H1 registered #129000
for use in meat and poultry plants
Conforms to USDA H1 - 1998
Meets FDA Regulation 21-CFR-178.3570
for incidental food contact
Penetrates to loosen frozen nuts and bolts
Provides excellent lubricity
Does not contain silicone
Colorless, odorless and non-toxic
Eliminates sticking, binding and squeaking
Non-staining lubricant
Safe on most surfaces
Inverta spray valve lets you spray in an upright
or inverted position
Value performance
|
|
|
Reduced the varnish deposits of oxidation and is used in a broad beach of temperature (of -35°C with +175°C). Synthetic oil for compressors and vacuum pumps, in which can occur a fortuitous contact between the foodstuffs and the oil contained in the drawing-off air. Compatible with the joints, the trimmings, the pipes and the elements of the pneumatic system or the circuit of air. Rank 68: also recommended to lubricate the A.F.C. chains.
|
|
|
|
|
|
LUBRICANTS and HACCP
The industrialists of the agro-alimentary sector are confronted with two requirements: to ensure the profitability of their exploitation by using high equipment the output and to promote a policy of quality and environment constantly improved.
They should solve the delicate problem of the lubrication of their machines, important factor of the productivity. To meet these needs, IGOL INDUSTRY proposes lubricating compositions designed according to a protocol meeting the standard ISO 9001, specifically developed for the agro-alimentary sector. These lubricants are produced in a specific workshop, on a site IGOL also certified ISO 14001 and ECO-AUDIT.
Hydraulic oils, gears, compressors, slides, fluids of heat transfer, grease, the fluids of this range developed since 1992 are preparations formulated with components in conformity with the guide workbench by the CNERNA (National Center of Coordination of the Studies and Recherches on the Nutrition and the Food) while answering the provisions into force defined by Food and Dry Administration (FDA): payment 21 CFR 178. 3570 (lubricants being able to come into accidental contact with foodstuffs the United States - H1 level).
|
|
Recognized throughout the world, the VICAFIL range is specially designed for wire, tube, bar drawing and metal rolling.
The range includes:
• VICAFIL®: the largest range of lubricants for all Wire Drawing applications in the industry
• STEELSKIN®: specific High Tech Dry lubricants range
• LUBRINOX®: specialized oil range for stainless steel applications.
• STEAGEL®: grease and paste for all applications
• CONDATUB: special range for steel tube and bar applications
• GALVASMOOTH®: range for galvanizing wires for hot dip processes
• CONDACLEAN: range of cleaners for all applications
• EXTRUGLISS®: dual purpose oil range for cold heading applications
As worldwide leader in Wire Industry, CONDAT offers you eco-friendly products (Borax free) and lubricants that fit with the most recent legislations (REACH, Biocides).
|
|
To be developed the problem with the use of water-mixable Kühlschmierstoffen (among other things corrosion at the workpiece and machines, dirt deposits, high wear of tools, bacteria development), Kühlschmierstoffe were for oelheld the GmbH in the principal firm, the drive in this area new ways to be gone here and, which repair at least a substantial part of the well-known problem.
With the again developed product row AquaTec is to be eliminated it oelheld succeeded the mentioned disadvantages as far as possible. Process stability is increased at the same time clearly and additional expenses is lowered.
|
|
Metalworking Lubricants, a specialist business unit within ROCOL Lubricants Group, develop and manufacture a range of innovative fluids and lubricants whose performance is designed to meet the increasing demands placed upon today's production processes. Commitment to new product development is unrivalled with experienced chemists dedicated in formulating cutting edge technology.
ROCOL Metalworking Lubricants products benefit machine shops, precision engineers, and fabricators throughout the world in many different industries.
|
|
Metal Working
Products made for the job
Armed with its experience in industry, MOTUL TECH offers a complete modern range covering all your needs in the field of metal working.
A progressive approach
In the current context of externalization and the continuing search for improvement of performance, MOTUL TECH brings you a process, product, environment approach for achieving your technical and economic objectives. For this purpose, we propose to join forces with you in a procedure of optimization of your productivity by the overall management of your cutting fluids.
A team of professionals who will listen to you
To serve you better, MOTUL possesses a multi-skills sales team in your area and lubrication experts at your service for all assistance, from the recommendation, the application and the handling of our produc...
|
|
Higher oils ultra fluid, they are appropriate for the lubrication and the protection of all movements for high and very high speeds:
- fast pins of machine tools: grinding machines, machines with points, spinning tops.
- fast pins of textile machinery.
- mechanisms with very weak play, stages.
- hydraulic control circuit requiring of oils of very low viscosity. Oils STITCHES ms have properties anti-wear, Extrême Precision (ranks ISO VG 5 to 10) and of the emulsions.
|
|
|
Ongoing research and a 90-year legacy of working with leading equipment builders help ExxonMobil Marine Lubricants develop products that continually meet customer needs. With a complete line of mineral and synthetic lubricants, we offer the products your fleet's engines and equipment need to perform reliably and operate efficiently. Our flagship product line for both two- and four-stroke diesel marine engines, Mobilgard, has been shown time and again in proof-of-performance trials. Also, we offer synthetic lubricants to help improve performance benefits and economic advantages for marine equipment operating at higher temperatures and under more stress.
|
|
Magnalube-G has a variety of applications and is truly designed for use in any situation. The high quality of Magnalube-G is never wasted on an application that may typically require lower-grade grease. The energy savings and machine part protection that arise in sensitive applications are not lost in other applications. Here is a list of a few of the many applications that Magnalube is specially designed for:
Gears, Bearings & Jack Screws
Actuators
Brake Calipers
Computer Components
Construction Equipment
Railroad Couplings
Die-casting Machines
Electric Motors
Electric Switches
Gaskets
Hydraulic Equipment
Laser Equipment
Medical Devices
Mold Release
Office Business Machines
Pneumatic Cylinders
Pumps
Railroad Engines
Seals, Valves & Gaskets
Tools
Trucks & Trailers
Valves
|
|
|
The particularly developed cutting oil from the SulFol LC-row is particularly for applications in the range of the machine cutting with geometrically defined cut the optimal solution and by their Additivierung on the most current conditions of the cutting oil technology.
|
|
Description
- High performance mineral oil-based metalworking oils.
- Heavy duty versions available for deep hole drilling, broaching, stamping, etc.
- Available in a variety of performance formulations utilizing extreme pressure and/or polaric lubricity additives with or without chlorine.
Applications/Properties
- Universal for machining and grinding of almost all materials.
- Perfect for job-shop screw machine shops.
- Especially suited for CNC machinery including Swiss-automatic lathes.
|
|
KUTWELL is the trademark for a line of two high-performance 'soluble' cutting fluids for cooling and lubricating the tool and work in machining operations. The line includes one petroleum-base fluid, KUTWELL 40, and one semi-synthetic fluid, KUTWELL 82.
KUTWELL products mix readily into water to form stable emulsions. They have excellent rust-preventive properties, both are inhibited against foaming, and both are versatile products suitable for a wide range of metal cutting and grinding operations. KUTWELL products effectively remove heat from the work piece and can be applied as a stream or in mist form.
In many cases, the proper KUTWELL grade can replace straight mineral cutting oils, and a single grade may often serve all the machine tools in a plant.
|
|
|
|
Lubricants, Greases
