|
|
1.Automotive synchronous belts,like ZA,MR,RU(ZB),ZBS,Y(MY) types
2.Automotive V-belts,like AV type
3.Automotive Multi-wedge belts,like PK type
|
|
HY-T® Torque Team™
Classical cross-section joined belt for shock load applications. Also ideal for pulsating loads, high capacity drives and/or for short center heavy duty drives.
HY-T® Wedge Torque Team®
Narrow cross-section joined belt for higher performance and shock load applications. Also ideal for pulsating loads, high capacity drives and/or for short center heavy duty drives.
Torque Team (Laminated)
Narrow cross-section joined belt with “engineered slip” which is particularly effective when installed on drives that can experience frequent stalls caused by obstructions
Torque Team Plus®
Narrow cross-section joined belt with Flexten™ cords for industry's toughest drives and/or high horsepower drives that require higher tension, increased resistance to shock loads.
|
|
This is the banded version of the "Source of Savings" Gold Ribbon Cog-Belt combining the longer life, energy savings, and superior operating characteristics of the Gold Ribbon Cog-Belt with the stability of a banded v-belt. The Gold Ribbon Cog-Band prevents belt whip and rollover on long center distance drives. The Gold Ribbon Cog-Band provides excellent service in harsh environments and high shock load situations.
Available in BX, CX & DX cross-sections from 55 inches to 360 inches.
|
|
HY-T® Torque Team™
Classical cross-section joined belt for shock load applications. Also ideal for pulsating loads, high capacity drives and/or for short center heavy duty drives.
HY-T® Wedge Torque Team®
Narrow cross-section joined belt for higher performance and shock load applications. Also ideal for pulsating loads, high capacity drives and/or for short center heavy duty drives.
Torque Team (Laminated)
Narrow cross-section joined belt with “engineered slip” which is particularly effective when installed on drives that can experience frequent stalls caused by obstructions
Torque Team Plus®
Narrow cross-section joined belt with Flexten™ cords for industry's toughest drives and/or high horsepower drives that require higher tension, increased resistance to shock loads.
|
|
PU endless Megarib belts
Standard Lengths
(mm) (inches)
220 87
271 107
275 108
278 110
283 111
288 114
304 120
330 130
345 135
356 140
360 142
381 150
392 154
406 160
431 170
444 175
457 180
471 185
483 190
Standard Lengths
(mm) (inches)
508 200
558 220
610 240
660 260
681 268
711 280
762 300
864 340
914 360
953 376
1010 398
1086 428
1120 440
1163 458
1202 474
1239 488
1268 500
1397 590
|
|
Ammeraal Beltech offers a complete range of quality power transmission belts made on state-of-the-art production equipment. This includes classical nylon core belting as well as modern belt constructions with thermoplastic inner layers. Special fabrics for low tensions ensure that the correct belt is specified for stable running and tracking in all operating modes.
Rapplon features a range of drive belts designed process belts for manufacturing processes. Drive surface are wear-resistant, with high grip or low friction, to guarantee uniform and stable speed transmission. Surface covers include fabric, leather, natural rubber, Elastomer, numerous thermoplastic coatings and for special applications seamless covers are available.
|
|
|
Thermoplastic urethane is very user friendly. It allows for quick splicing with the means of heat welding the belt ends. Belting is available in open-ended rolls (standard rolls 100-500 ft.) or cut and welded to your exact length required.
|
|
Flat Belts from Goodyear are available in three types of construction:
Truly Endless Compass™ Cord Belting
Truly Endless Multiple Ply Belting
Regulator™ Power Strap Belting
Truly Endless Compass® Cord Belting:
Applications include Wood planers, tube winders, concrete pipe spinners, wood chipper drives. Thinner by 25%, or more, compared to plied belts of equal horsepower allows for use on smaller pulleys and higher speed drives.
Available in light, medium and heavy duty constructions.
Normally furnished in natural rubber constructions but can be made with oil resisting synthetic rubber.
For the most demanding drives, up to 1850 horsepower, special steel cable constructions are available.
Can be supplied with rubber covers if required.
Sizes available:
Widths 1" -- 36"
Lengths 24.5" -- 135ft
|
|
optibelt KK
Plastic V-belting with special top surface
Plastic V-belting with triangular top surface
>> optibelt RR
Plastic round section belting
Splicing tools
>> optimat OE
Open ended V-belting, punched
>> optimat DK
Open ended double V-belting, punched
>> optimat FK
Open ended conveyor belting, punched
optimat PKR
Open ended V-Belting, DIN 2216,
with special top surfaces
optibelt LB
Link belting
optibelt RF
Rubber covered flat belting, Type B 50
optimax HF
Endless high performance flat belts
optiflex WR
Polyurethane wide angle belts (angle 60°)
|
|
|
|
|
|
LiftPower flat belts
LiftPower flat belts are used where objects have to be moved:
in lifting units: for vertical transport of motor vehicles,
in high-bay warehouses, as a replacement for chains and steel cables
in scissor table lifts: as replacement for hydraulic cylinders
Benefits and properties:
- The belt structure, made of polychloroprene rubber enables higher speeds while reducing noise as compared with chains and cables.
- The tensile members are protected against external influences since they are embedded in polychloroprene.
- Easy installation via clamping joints.
- Paint-compatible model available on request.
- The very low thickness tolerance of +/-0.13 mm produces an even distribution of force in the belts when several belts are wound simultaneously.
- LiftPower belts operate on flat and crowned pulleys. Special profiles are not required. The flexible design of the LiftPower enables significantly smaller pulley diameters as compared with conventional belts.
- LiftPower flat belts are maintenance-free; no re-tightening or lubrication required.
|
|
BRECO TIMING BELTS consists of wear resistant polyurethane and high tensile steel cord tension members.
Both high quality materials combined form the basis for dimensionally stable and high resistance BRECO and BRECOFLEX TIMINGS. Added nylon facing makes a low noise timing belt with a high performance.
BRECO TIMING BELTS are manufactured from open length material welded to endless belts.
In the join area the reduced number of tension members assume part of the load. The use of endless joined BRECO TIMING BELTS is preferred in the conveying technology to handle any centre distance.
The timing belts are temperature resistant with ambient temperatures from -30°C to +80°C. Applications close to the limit temperatures (50°C), however, might require adapted dimensioning. In this case please contact your Mulco partner.
Corrections of the permitted load values are to be considered for deviations from the standard
|
|
|
Flat belts with extra-thick conveying side coating and integrated suction slits and perforations for vacuum conveyance on larger suction surfaces
|
|
Siegling Extremultus high-efficiency flat belts
Siegling Extremultus high-efficiency tangential belts and spindle tapes
Siegling Extremultus folder and carrier belts, layboy tapes
|
|
|
HONGS BELT flat transmission belt fits these production requirements of high-speed operation, high strength, low noise. We have 80 types of belts to meet the different production condition you need, which are applied to a broad field, weave, print dye, woodworking, packing, marble, food, airdrome, metalworking, sport equipment and so on.
|
|
|
High-efficiency leather flat-belts: automatic lathes, centrifugal pumps, light construction textile machines, generators, agitators, carding machines, turbine, pulpers, cone drives, metal-press, cross and half-cross drivers
|
|
Top performance :
Decreased costs.
Reduced weight.
Quiet operation :
Dampened vibrations.
Improved acoustic comfort.
Trouble-free installation :
Fixed centre-distance.
No need for tensioning system.
Maximum safety :
Overload take-up.
Long-lasting belt.
|
|
Habasit supplies a comprehensive range of feeder belts and folder gluer belts for box making applications. They display excellent reversed bending properties and their covers provide highest abrasion resistance, constant and safe grip and do no not mark the transported goods.
Overall Habasit offers outstanding solutions that guarantee perfect quality, high output and best in class performance.
|
|
Metric Power-Wedge v-belts are manufactured for high performance. They are highly flexible, resist stretch, heat, oils, chemicals and ozone, and dissipate electrostatic charges.
Metric Power-Wedge® v-belts are designated with four letters (SPZX, SPAX, SPBX, SPCX) which identify the section and a series of numbers which represents the pitch length in mm.
|
|
|
|
|
|
Construction:
- Raw edge construction, ground.
- Narrow cross-section.
- New, optimised notch profile reduces and evenly distributes thermal and bending stresses. Notch depth is in proportion to the crosssection to ensure perfect stability.
- Precision-ground sidewalls give a uniform wedging action.
- Fibre-loaded elastomeric compound withstands heat, ozone and sunlight.
- Flex-bonded polyester tensile cords are vulcanised as one solid unit,increasing the belt’s resistance to tensile and flexing forces.
- Double Flex-Weave® textile backing protects the belt against wear — especially when back idlers are used.
- Cross-cords improve belt stability.
- Even with severe slippage, the belt will not catch fire from heat buildup.
Advantages:
- The most powerful belt in Gates’ industrial V-belt range.
- Excellent performance/cost ratio.
- Increased transmission efficiency as compared to other V-belt types.
- Cost and space savings.
- Maximum belt life reducing maintenance time.
- Match system: all sizes meet Gates UNISET tolerances.
|
|
Available in all pitches, standard and customized.
A wide range of materials and special treatments.
We can deal with orders of any size, from large to small ones.
VISION-TECH pulleys are supplied together with our cog belts
to guarantee the accuracy demanded by customers and the quality
that has always distinguished VISION-TECH products.
All pulleys are marked on the side with the VISION-TECH logo.
|
|
Hole Patterns & Shapes
Vacuum Belts provide positive holding power for very light weight products, such as paper, plastic film and fabrics. Hole size and pattern (percentage of open air) can be modified to meet the application’s need. There are endless possibilities. There are some standard patterns available, but usually each unique application requires its unique hole pattern. A simple drawing with dimensioning is all that is required to have a die made for perforating. Please contact our Technical Department.
Note: For vacuum applications, it is possible under certain circumstances, to extrude urethane timing belts with cord spacing that allows for placing the holes between cords so that the cords are not cut during perforation.
|
|
Typical features :
elastic or low stretch,
antistatic properties,
excellent running features,
dual coefficient of friction,
ideal for knife edge applications or paper accumulators,
extensive range of possible combinations
|
|
Series 51
foam systems
drive/transport
~ food, paper, packaging, weigh-feed equipment,
machine building industry, printing and folding industry
~ with Polyester fabric, efficient and flexible
~ with Aramide fabric, tear-resistant and low stretch
~ lengths from 150 mm - 4200 mm
Series 61
compact-systems
70 Shore A coating
~ glass production, paper, packaging, printing and folding
industry
~ laterally rigid, elastic or non-stretch, with or without fabric
~ lengths from 150 mm - 4200 mm
|
|
PU endless timing belts
- any special length on request
T5 - T10 - T20 AT5 - AT10 - AT20 XL - L - H - XH
RPP5 - RPP8 - RPP14 MTD8M ATG10 P2
|
|
|
|
|
|
- Available Pitch Sizes: XL, L, H, XH
T5, T10, T20, AT5, AT10, AT20
HTD®: 5M, 8M, 14M
- The widest selection available
- Steel and Kevlar ® cord construction provides excellent strength
- Cost effective
- Readily available
- Long lengths slit to various widths
Urethane Belts
Open-ended roll lengths can be thermally welded to almost any required length, or fixed end to end with our clamping plates. Truly endless is the strongest construction, recommended for drive and high torque applications.
Urethane Construction and Teeth Molded integrally the urethane protects the cords and provides a strong, flexible and excellent wear-resistant
belt. Various urethane compounds are available depending on construction. To ensure correct engagement with the pulley grooves, the teeth are precisely formed and accurately spaced. They are precisely located so that the tooth root line lies substantially on the pitch line; thus the tooth spacing of the belt is not altered by flexing.
Low friction nylon fabric on the tooth and/or back side, is available on thermal weldable urethane
|
|
|
|
|
|
M.E.C. V Belt ® Trasmission Belt
A Zeta Gomma's modern M.E.C. V-belt® OIL STAT® stands out thanks to its excellent resistance and the high level of power transmissible.
Compared with the now familiar flat belts, the grip they offer is almost triple due to the contact established along the slanted sides of the pulley races, so guaranteeing a better mutual grip. All the M.E.C. V-BELTS® also feature OIL STAT®, i.e. they are resistant to the action of oil and heat, and they are electroconductive, so they ensure the electrostatic charges are deflected properly, and ISO 9000-compliant.
The innovative features of these belts represent the fruit of continuous careful product research and testing, but above all of over thirty years of experience gained in the transmissions sector.
M.E.C. V-BELT® OIL STAT® belts are manufactured employing the latest generation technology and undergo rigorous checking and testing. Their quality is guaranteed by the API trademark, which means they meet the American Petroleum Institute specification and the ISO 9000 certification requirements.
The M.E.C. V BELTS ® can be supplied on request with special lengths not shown in our sales catalogue, for lengths of up to 17.000 mm.
|
|
Ammeraal Beltech offers a complete range of quality power transmission belts made on state-of-the-art production equipment. This includes classical nylon core belting as well as modern belt constructions with thermoplastic inner layers. Special fabrics for low tensions ensure that the correct belt is specified for stable running and tracking in all operating modes.
Rapplon features a range of drive belts designed process belts for manufacturing processes. Drive surface are wear-resistant, with high grip or low friction, to guarantee uniform and stable speed transmission. Surface covers include fabric, leather, natural rubber, Elastomer, numerous thermoplastic coatings and for special applications seamless covers are available.
|
|
This is a stainless steel belt for power transmission.
Main feature is that this is seamless without joint, thus enabling extremely precise power transmission.
The belt is made seamless by ring rolling process, which results in higher tensile strength and even toughness on the entire belt including the original joint section.
Belt thickness ranges 40 micron to 500 microns and tensile strength shows more than 1560 Newton per square milimeters. This indicates that pulleys for this belt can be downsized and the whole driving unit is made compact.
Application is presice power transmission such as paer feeding drive unit in printers, X=T table driving and measurering devices.
|
|
|
With the highest standards of quality and an extensive variety of products, HabaDRIVE really gets things moving. Our high efficiency flat and tangential belts are ideal for high power transmission, while further tasks are best fulfilled by spindle tapes, machine tapes and round belts. For specialized applications, seamless power transmission belts guarantee the highest degree of precision.
|
|
|
|
|
|
VISION-TECH sleeve cog belts have been designed for power transmission
and locating applications. These belts are made in the form of sleeves.
As they are completely without joints and welding, they are ideal for higher
torque transmissions and greater loads.
High-quality polyurethane combined with steel strands offers VISION-TECH
cog belts many advantages over rubber (neoprene) belts.
VISIONFLEX 'F' SERIES SLEEVE BELTS
VISIONFLEX belts are manufactured in customized lengths,
ranging from 2.5 to 12.5 meters. Our exclusive manufacturing process
offers the advantage of customized length belts, combined with the power
and reliability of closed loop construction.
SINCROTECH 'S' SERIES SLEEVE BELTS
SINCROTECH belts are produced in the form of sleeves, then they are cut
lengthwise in customized widths. Available in several pitches and lengths,
they prove extremely useful. For special applications, profiles and other customized
solutions can be designed and welded during
the making of the sleeve itself.
|
|
|
|
Transmission Belts
