Transmission belts

Length: 100, 200, 150 m
Width: 45 mm
Thickness: 4.5 mm

... -45: a durable, reliable and low-maintenance engineered belt for extended life in demanding applications in a Logistics warehouse. In the realm of modern intralogistics, power transmission belt systems ...

... sources. That means this “eco-friendly” belt solution can support companies that have embraced sustainability as part of their policy and are taking care of the environment. MEGAFLEX Biobased timing ...

Belt and cleat fragments from all Megalinear XMD and Megaflex XMD belts can be spotted by metal and x-ray detectors, thanks to a special compound used in the manufacture of these timing ...

Width: 28 in

... cost of ownership with Gates® PowerGrip™ GT4™ belts for factories, plants and other industrial equipment. Combining all new advanced materials science and process engineering, Gates introduces a new belt-driven ...

Length: 480 mm - 1,200 mm
Width: 48.5 mm - 102 mm
Thickness: 2.2 mm - 10 mm

... APPLICATION ADVANTAGES YOU CAN COUNT ON. Linear Timing Belts provide the greatest degree of flexibility for both synchronous conveying and linear positioning applications. Gates TPU manufactures linear ...

Length: 880, 50 mm
Thickness: 2, 3, 4.8 mm
Temperature: -5 °C - 70 °C

... linear extruded flat belts offer various combinations of tensile member materials and several urethane grades, making our belts suited for a wide variety of lifting and pulling applications. This product ...

Poly V belt transmits the torque and the power by contact of the belt rib flanks and the pulley grooves. The Hutchinson Poly V is a molded belt, its monobloc design guarantees: Compactness High ...

... high quality power transmission Reduced costs The Flexonic® belt is a molded belt and has been designed with a larger contact surface area than V belts or flat belts ...

This Flexonic® NANO Elastic Belt is specially designed for small household appliances, hand tools and micro-mechanisms where synchronism is not necessary. PERFORMANCE Lower hub loads Silent drive Easy to fit

Width: 6 mm - 120 mm
Pitch: 5, 8, 14, 3 mm
Temperature: -15 °C - 60 °C

HC Type Ultra PX Belts enable high load transmission, long life, and compactness thanks to its high strength material and PX belt tooth contour. Next-generation timing ...

Width: 10 mm - 120 mm
Pitch: 5, 14, 8 mm
Temperature: 0 °C - 60 °C

... . This belt is based on the high-performance "Ultra PX belt HC type", with added oil and water resistance, and has the same transmission capacity as HC type. ＊The Oil Proof Type Belt ...

Width: 6 mm - 120 mm
Pitch: 5, 8, 14, 3 mm
Temperature: -15 °C - 60 °C

HY Type Ultra PX Belts use a hybrid core of carbon and glass for dramatically increased strength and durability. Tsubaki pursued maximum performance to bring even higher load transmission and longer ...

Straight running belts l Pitch 50 mm (1.97 in) Belts for medium-duty food applications • Hinges that open wide, combined with smooth, flat channels on the underside provides an easy-to-clean belt ...

... 1850 kW capacity • their ability to easily handle bevel and cone drives in which the belt rotates on its longitudinal axis Siegling Extremultus power transmission belt are available in different designs: • ...

... quick fitting resulting in less downtime The belts’ quality and performance have a major impact on the speed and reliability with which our customers can operate their distribution processes. The belt’s ...

Length: 90 mm - 4,956 mm

... Double-sided belts have teeth equally constructed on each side of the belt, which enables them to mesh with toothed pulleys on both the inside and outside. The construction of the belts ...

Double-sided belts have teeth equally constructed on each side of the belt, which enables them to mesh with toothed pulleys on both the inside and outside. The construction of the belts ...

Toothed belts T profile Material: Polyurethane (PU) with steel cord reinforcement. Note: Endless toothed belt with trapezoidal profile to DIN 7721 T1 with metric pitch. Ideal for drives with high belt ...

Toothed belt profile HTD 5M Material: Belt back and belt teeth CR. Tension cords Glascord. Tooth covering mesh polyamide. Note: Endless toothed belts with an arched ...

V-belts DIN 2215 Description Material: Neoprene with polyester tensile cord. Note: Endless V-belt acc. to DIN 2215 (classic V-belt). Electrically conductive acc. to ISO 1813. ...

Timing belts and timing drive tapes are designed to function with specialized timing pulleys to guarantee precise, cyclical transport of products. Conveyor ...

Timing belts and timing drive tapes are designed to function with specialized timing pulleys to guarantee precise, cyclical transport of products. Conveyor ...

Timing belts and timing drive tapes are designed to function with specialized timing pulleys to guarantee precise, cyclical transport of products. Conveyor ...

Width: 10 mm - 25.4 mm
Thickness: 6 mm - 23 mm
Temperature: -25 °C - 100 °C

... : Higher power transmission capacity than wrapped Belts Special cog design for enhanced flexibility and heat dissipation rate Suitable for drives using smaller diameter pulleys and high RPM Anti-static, ...

Length: 546 mm - 5,000 mm
Width: 9.7 mm - 15.8 mm
Thickness: 14, 13.5, 18, 10, 8 mm

... - up to 50% more than standard Belts Special cog design facilitates enhanced flexibility and quicker heat dissipation High transmission efficiency up to 98%, providing optimum output Maintenance-free ...

Length: 700 mm - 5,000 mm
Width: 9.7 mm - 22 mm
Thickness: 8, 10, 14, 18 mm

... in minimal service costs. - Exceptionally high power rating over standard Belts. - Special Belt surface design for superior flexibility and abrasion resistance. - High transmission efficiency ...

... cross section is increased (when compared to the standard belt) and this results in a lower belt elongation and more precise positioning accuracy. • HPFE high resistance and flexibility: this kind of ...

Length: 900 mm - 9,000 mm
Temperature: -25 °C - 80 °C

... ELA-flexSD® belts are manufactured with high tension strength steel tension cords and with high wear, abrasion and tear resistant polyurethane. Having no splice or welding, the belts have no weak cross ...

Temperature: -10 °C - 80 °C

Elatech iSync® timing belts are innovative high performance belts for power transmission made with polyurethane resin body and tension cords in steel or aramid fiber. ...

Thickness: 1.36 mm - 10 mm
Pitch: 2 mm - 14 mm

The transmission of synchronous belt is a new transmission mode andtransmits the dynamic force by the meshing of the belt teeth and pulley, It combines respective advantages ...

Our L Timing Belt is a specialized power transmission solution, engineered to provide accurate and reliable motion transfer across a wide spectrum of applications. It stands out for its ...

Width: 9.7 mm - 25 mm
Thickness: 8 mm - 23 mm

The transmission of synchronous belt is a new transmission mode andtransmits the dynamic force by the meshing of the belt teeth and pulley, It combines respective advantages ...

Special machining on timing belts ensures optimal performance and meets the specific demands of each application. Every sector and process has unique requirements, and customization allows the belt’s ...

Timing belt coatings are essential for adapting their surface to the specific needs of each application, providing properties such as wear resistance, improved traction, high-temperature resistance, non-stick ...

Custom cleats are additional profiles placed on the surface of the belt to assist in the transport of specific products. These cleats are tailored to the specific needs of each application, allowing for a unique fit ...

Thickness: 5, 2, 2.5, 3 mm

Elastic rubber straps are widely used in different applications thanks to their ability to extend and contract. They are used in the automotive sector for fixing light loads, in sport and free time to bind equipment, in the manufacturing ...

Banded V-Belts group multiple v-belts by a common backing and are available in A(1/2") groove, B(5/8") groove, C(7/8") groove and D(1-1/4") Groove. This increases the durability of the v-belt ...

Width: 13, 17, 22 mm
Thickness: 10, 13, 17 mm

Double Sided Belts Features: Are used to transmit power on both sides of the belt. Build with special tension cords to meet multiple bend and dual power requirements. Oil and heat resistanttanged. ...

Link V-belts are made from interconnected links that can be customized to any length without using tools. They are typically used to replace standard V-belts, eliminating the need to stock different lengths ...

Width: 15 mm

V-belt PU75A red smooth (also available as notched version) approx. 80° Shore A Recommended pretension 4...8% available profile dimensions (mm): 6x4 (Y), 8x5 (M), 10x6 (Z), 13x8 (A), 17x11 (B), 22x14 (C), 32x20 (D)

V-belt PU75A sky blue smooth Hardness: approx. 80°Shore A Recommended pretension: 4...8% FDA/EC/USDA conformity Hydrolysis resistant available profile dimensions (mm): 6x4 (Y), 8x5 (M), 10x6 (Z), 13x8 (A), 17x11 (B)

V-belt PU85A sapphire blue smooth (also available as notched version) approx. 88° Shore A Recommended pretension 4...8% FDA/EC/USDA conformity

Length: 378 mm - 15,320 mm
Width: 10 mm - 38 mm
Thickness: 6 mm - 23 mm

V-belts, also known as Z, A, B and C belts, are designated by their width. The letters (Z, A, B, C) define the width of the belt, while the accompanying number indicates the length and ...

Length: 512 mm - 5,600 mm
Width: 10, 13, 16, 22 mm
Thickness: 8, 10, 13, 18 mm

XP belts are the toothed versions of narrow belts, offering increased flexibility. Unlike other belts, the teeth of the XP belt are not used to drive ...

Length: 111 mm - 6,880 mm
Width: 6 mm - 500 mm
Pitch: 3, 5, 8, 14 mm

HTD synchronous belts have been recognized for many years for their outstanding performance in a variety of applications. Compared with conventional inch V-belts, they offer considerably higher power ...

Pitch: 14, 8 mm

... provide the only existing transmission belt with mechanical assembly. The only existing transmission belt with mechanical assembly, a unique solution on the market. It ...

... above 10 mm with reinforcement Steel, Kevlar or Stainless steel. The mechanical resistance of split belts ERO Joint® HP is equivalent to welded belts. Metal components are in stainless steel. No minimum ...

... currently improved. Polyurethane round belts ERO Joint® are suitable for power transmission or for transport. In all cases, the mechanical assemblies ERO Joint® are linked to a traction cord embedded ...

STANDARD FOAM BELT Foam belt Categories: Glass factory, Inspection machines, Spacers / Conveyors DESCRIPTION Product description Black foam, grey foam, or spongy foam Different length, thickness, ...

Grey Toothed Foam U profile grey foam Toothed foam with felt Linatex coating Foam + fabric

Pitch: 1.3 mm - 1,380 mm
Temperature: -30 °C - 80 °C

Timing Belts and Pulleys Reliance timing belts and timing pulleys are available in 2.5 mm and 5 mm pitch. High tensile stainless steel reinforced polyurethane ...