Gearboxes for special applications

146 companies | 464 products
Filters
  • What’s new?
industrial gear reducer - 4 650 - 194 000 Nm, 7.1:1 - 500:1 | HDP series

Now at the forefront of the parallel shaft gearbox category, the HDP - Parallel shaft gearbox...

single-screw extruder gear reducer - 4 650 - 75 000 Nm, 7.1:1 - 125:1 | HDPE series

The HDPE Extruder Gearbox Series has been engineered for single-screw extruder drives, an improvement...

concrete mixer gear reducer - 3 000 - 75 000 Nm, 17:1 - 161:1 | 500 series

The 500 series of transit mixer gear motors are dependable, compact, and price-effective...

orientation fixture gear reducer / for mobile applications - 1 000 - 80 000 Nm, 3.4:1 - 2 000:1 | 700T series

Offering the safest and most efficient solution to all slew drive applications is...

orientation fixture gear reducer / for mobile applications - 750 - 9 000 Nm, 1.5 - 20 t | 700TK series

Bonfiglioli's 700TK Series - Compact Slew Drive was designed to be compact and compressed without...

{{productDetail[46]}}
curved gear reducer / for aerator / for wastewater treatment - i= 6.3:1 - 112:1, 10.5 - 173 kNm

Siemens' FLENDER Gear Units for aerators are highly customized to provide great support for the machines, which are primarily impellers stationed at the biological section of any sewage...

curved gear reducer / condenser / air cooled - i= 6.3:1 - 28:1, 10 - 69 000 Nm

The main function of these air cooled condensers would be to condense the waste steam after steam turbine. Hence they are used in power stations. Through convection process, the heat is dissipated...

belt conveyors gear reducer - i= 5:1 - 90:1, 6.2 - 900 kNm

The solution to the nightmare of every manufacturer is provided by the belt conveyor operated at speeds that may exceed 7 m/s.

The transportation...

curved gear reducer / bevel / for bucket elevators - i= 18:1  80:1, 11.6 - 125 kNm

Siemens presents FLENDER gear units for bucket elevators, which are used for transportation of high volumes of bulk material to varying heights and dumping it without any dust creation. Typically, the height level is more...

planetary gear reducer / for bucket wheel excavator - i= 112:1 - 450:1, 400 - 2 600 kNm

The FLENDER Gear Units for bucket wheels by Siemens are situated at the very edge of...

{{productDetail[7015]}}
slew drive - 160 l/min, max. 350 bar | MSC

The MSC series of slew drive modules is optimized for controlling open circuit slew drives in excavators,...

gear reducer for wind applications - 229 - 1 904 Nm | REDULUS GPV

The Main Gearboxes REDULUS GPV for Generator Ratings which ranges up to 2,000 kW, offers a compact design as it merges a planetary stage along with two spur...

{{productDetail[13611]}}
industrial gear reducer - 180 - 805 kNm | ML series

SEW EURODRIVE provides the central platform for customized applications with the ML series helical and helical-bevel gear units, utilized for connecting...

curved gear reducer / explosion-proof - max. 475 kNm

The Explosion-proof X Series of explosion-resistant, industrial-use gear units are helical-bevel, as well as helical gear units (with up to 475 kNm torque) designed, developed, and manufactured by Sew-Eurodrive....

{{productDetail[283]}}
high-power gear reducer - max. 370 000 Nm | S series

The Brevini high power gear units are the optimum proposal for all applications requiring high torque with minimum dimensions, on fixed industrial equipment and also self-propelled...

high-power gear reducer - max. 370 000 Nm | S series

Brevini's range of mixer drives are planetary gear units which have been modified in order to meet the operating requirements needed for mixers and water conditioners in ceramic, chemical...

high-power gear reducer - max. 370 000 Nm | S series

The Brevini pump drive gear units utilize power from diesel engine or electric motor to drive up to 5 pumps at a time. These gear units are available in various...

{{productDetail[15237]}}
valve actuator gear reducer - max. 10 846 Nm, max. 1 557 kN | IB/AS

Gear series IB/AS combination operators from Rotork are multi-turn gearboxes employed in manual or motorized systems that...

dual-shaft gear reducer - DSIR

The Dual Speed Input Reducer (DSIR) manufactured by Rotork features two gearing ratios. The...

custom gear reducer - max. 32 000 Nm | ILGS

The single acting override incorporates quarter turn gearboxes for spring return pneumatic actuators....

{{productDetail[31135]}}
mechanical speed variator - 3 - 2 015 Nm, 0.09 - 1.5 kW | VR series

The VR Series - Dry Friction Speed Variators are used in fractional and medium power drives and general purpose applications. The fully...

mechanical speed variator with planetary reduction gear - 2 - 64 Nm, 0.22 - 4 kW | VS series

The VS series of mechanical speed variators is available in six designs, which include combinations...

screw conveyors gear reducer - i= 2.5: - 7.9:1, 4 - 32 Nm, 0.25 - 1.5 kW | RP90 series

Varvel presents the RP90 series one-stage helical gearboxes. These are primarily used...

{{productDetail[27841]}}
valve actuator gear reducer - 125 - 1 000 Nm | GHE series

Despite high levels of automation there are still valves that are manually operated. This...

valve actuator gear reducer - 3.8 - 217 kN, max. 500 mm | LE series

AUMA linear gearboxes perform linear movements, e. g. when...

high-capacity gear reducer - max. 80 000 Nm | GHT series

The AUMA Multi-turn gearboxes GHT series is designed for pipelines that utilize multi-turn...

{{productDetail[15285]}}
industrial gear reducer - 25.000 - 242.000 Nm, 2.2 kW - 1.000 kW

In accordance to the well-tested unicase housing principle, the NORD industrial gear units have been improved in which the unicase is carried out from a unique jig and the...

mechanical speed variator - 0.25 - 110 kW, 6:1

The Unicase Belt Variator Geared Motors by Nord utilize constant axial pressure and a symmetrical pulley design to allow for optimal power transmission. It features an easy-to-use hand wheel that...

mechanical speed variator - 0.12 - 4 kW, 7:1

These Helical Bevel-Geared Motors are available in a broad selection of motors and brake motors. These have analog or digital speed indicators with an easily-operated handwheel...

{{productDetail[4808]}}
mechanical speed variator - 0.12 - 4 kW, 7:1

Radicon has an abundance of experience working in the cement industry from supplying new gearboxes to offering full service and repair on existing installations.

Featured...

mechanical speed variator - 0.12 - 4 kW, 7:1

Radicon is a trusted name in supplying and manufacturing products for material handling applications. Radicon products are known for being efficient, durable...

mechanical speed variator - 0.12 - 4 kW, 7:1

Cooling Tower Gearboxes, Radicon power ranges up to 500 kw, with its high quality...

agitator gear reducer / for agitators - i= 25:1

The Banbury Mixer Drive Gearbox is a customized line of...

extruder gear reducer - i= 63:1

The Extruder Drive Gearbox can be customized by vertical installation...

{{productDetail[16389]}}
bevel gear reducer / curved / right angle / cooling tower - i= 6.3:1 - 18:1, 10 026 - 45 000 Nm | Paramax SFC series

Sumitomo Drive Technologies' Paramax SFC series is a product line that features a variety of premium-quality bevel helical drives that are ideal for applications involving condensers, cooling...

centrifuge gear reducer - i= 6:1 - 260:1, 200 - 40 000 Nm | ZS series

The Sumitomo Cyclo Drive centrifuge reducers offer a special design for screw centrifuges. This Cyclo Drive centrifuge is the most ideal drive to utilize for centrifuges with...

{{productDetail[317]}}
centrifuge gear reducer - i= 6:1 - 260:1, 200 - 40 000 Nm | ZS series

The cyclo centrifuge drives from Sumitomo create differential speed from the bowl and conveyor as well as the...

mechanical speed variator - Beier® series

The Beier Variator from Sumitomo is for...

servo-gearbox - i = 11:1 - 87:1 | Cyclo® Servo 100

The Cyclo® Servo 100 from Sumitomo Drive Technologies are servomotor speed reducers...

cycloidal servo-gearbox / low-backlash - i = 6:1, 12 arcmin | Cyclo® Servo 6000 series

The Cyclo® Servomotor Servo 6000 speed reducers are built for high efficiency, exceptional...

cycloidal servo-gearbox - i= 11:1 - 87:1, 140 - 4 000 lb.in | Cyclo® Servo 100 series

These revolutionary speed reducers are designed with exclusive Cyclo® technology....

{{productDetail[15521]}}
harsh environments gear reducer / planetary - max. 876 Nm | AquaTRUE™

A solution to the tough demands of hostile setting applications is Thomson Micron's new offering - AquaTRUE™ Gearhead. It is designed with...

{{productDetail[7040]}}
conveyor belts gear reducer / shaft-mounted - 3/4

The patented design of the Browning TorqTaper Plus tapered bore system offers easy installation and removal....

conveyor belts gear reducer / shaft-mounted - 3/4

Manufactured by Emerson Industrial Automation, the Finished Bore is one of the available options for the Browning shaft mount reducer. It allows...

conveyor belts gear reducer / shaft-mounted - i = 148:1 | RBC series

RBC (Rotatiing Bilological Contactor) helps in reducing...

{{productDetail[15945]}}
pump gear reducer - max. 180 kW, max. 3 200 rpm | AM 110 series

This Twin Disc Gear Reducer comes from a line of pump drives. A wide assortment of gear ratios are available for these products. Several input options are also on the market such as a clutch that...

pump gear reducer - max. 205 kW, max. 3 200 rpm | AM 216 series

These new pump drives offered by Twin Disc are designed to meet a wide selection of application needs for hydraulic systems. There are several input options to choose from with the modular design,...

pump gear reducer - max. 355 kW, max. 3 200 rpm | AM 220 series

Twin Disc has a new line of pump drives for various hydraulic system set-ups and application requirements. These drives have a wide range of gear ratios as well as configurations for increasing and...

pump gear reducer - max. 430 kW, max. 2 600 rpm | AM 230 series

Twin Disc pump drives are suitable for a variety of set up and application requirements for hydraulic systems. A broad range of gear ratios is available with these drives, which include configurations for both...

pump gear reducer - max. 565 kW, max. 2 400 rpm | AM 232 series

The Twin Disc Instrument now provides a novel series of pump drives. This is to further manage such a wide array of hydraulic system functional requirements, as well as foundations. They feature a modular architecture,...

{{productDetail[16941]}}
differential - 50 - 2 500 Nm, i= 1:1 - 3:1

Old version Phase shifter gearboxes come in variable types, namely, UE, UEF,...

differential - 50 - 2 500 Nm, i= 1:1 - 3:1

This gearbox by Vogel Antriebstechnik is best used for smaller or minimal adjustments for certain...

{{productDetail[9352]}}
custom gear reducer - 2 - 10 Nm, 14 - 440 W

Heidrive GmbH provides custom-made gear reducer with range from 2 Nm to10...

{{productDetail[14066]}}
mechanical speed variator - VARIO series

The VARIO series from Motive, is a mechanical speed variator that is enclosed in a rugged aluminium die-cast housing. It is available in 3 sizes, which are small, medium and large. Each Vario...

{{productDetail[14726]}}
conveyor belts gear reducer / shaft-mounted - max. 3 000 Nm | S series

Specifically designed for applications involving conveyors or augers, these units are also suitable for a wide variety of industrial fields. S-series shaft-mounted gear reducers, available in cast iron casing only, sizes from 052 to 123, offer a large range of reduction ratios and are fully efficient in any...

mechanical speed variator - max. 15 Nm, max. 2.2 kW | TXF series

The Motovariator, developed by Motovario, comes with die-cast aluminum alloy construction. The unit features high reliability, easy operation and maintenance, bidirectional operation, vibration free, and low noise. It is...

mechanical speed variator - max. 144 Nm, max. 9.2 kW | S series

The Motovariator, developed by Motovario, comes with G200 grey cast iron construction. The unit features high reliability, easy operation and maintenance, bidirectional rotation, vibration free, and low noise. It is...

mechanical speed variator with helical reduction gear - max. 5 000 Nm, max. 9,2 kW | VH series

With the high reliability due to 45 years experience of manufacture, VAR series motor variators represent a viable alternative to electronic drives. These units are EMC electrically compatible with ease of operation and maintenance. The cast iron...

mechanical speed variator with helical reduction gear - max. 480 Nm, max. 2,2 kW | VHA series

The Motovariator-gear reducers aluminum Series is manufactured by Motovario. The product has compact and durable design because it is made of die-cast aluminum alloy....

{{productDetail[2245]}}
mechanical speed variator with helical reduction gear - max. 480 Nm, max. 2,2 kW | VHA series

Bondioli and Pavesi's Custom Gear Reducers are generally utilized for applications that...

{{productDetail[6240]}}
Subscribe to our newsletter
Thank you for subscribing
There was a problem with your request
Invalid email address

Receive updates on this section every two weeks.

With DirectIndustry you can: Find a nearby distributor | Contact the manufacturer to get an estimate or a price Examine product characteristics and technical specifications | View PDF catalogs and other online documentation