Compact gear reducers

Aluminium Gear Units - Powerful Lightweights Modern gear units have to be robust, compact, powerful and economical - and above all they need to be light. NORD DRIVESYSTEMS offers a wide ...

Torque: 0.1 Nm

R10 Our R10 is a full plastic gearhead designed in a one piece construction for better gear train alignment. Due to this feature and also due to fact that a unique geartube material is used leads to ...

Torque: 0.25 Nm

R13 Our R13 is a full metallic gearhead designed with a planetary arrangement for applications requiring high torque in a relatively smaller package. Due to its lower backlash feature it is ideally suited for precision ...

Torque: 0.3 Nm

... higher radial loads. Customized shaft lengths, special lubricants, and mounting flanges are all available for the R16 mini motor gearhead

Torque: 4 Nm - 8 Nm
Rotational speed: 8,000, 9,000 rpm

... Series R metal planetary gearhead portfolio beyond the existing 20/1R by introducing the new 26/1R and 32/3R Series gearheads. These new products with 26 mm and 32 mm diameter represent the evolution of previous 26/1 ...

Torque: 300 Nm - 5,300 Nm

... The solid shaft type is excellent for connections with couplings, chains, and belts. The wide selection allows for more compact design of your equipment. Features Excellent balance between capacity, efficiency ...

Torque: 13 Nm - 1,562 Nm
Rotational speed: 3,000 rpm - 10,000 rpm

The GFE line is available in seven sizes ranging from 50 mm to 220 mm. Ground helical gears ensure a minimum noise level and smooth running. The full needle bearing allows for torques that beat the competition for units ...

Torque: 202,000 Nm - 1,920,000 Nm

... top side of the chain. They consist of a primary CAVEX worm stage and two secondary planetary gear stages. FLENDER gear units for traveling gears are compact and powerful ...

Torque: 100,000 Nm - 2,600,000 Nm

The FLENDER Gear Units for bucket wheels by Siemens are situated at the very edge of the bucket wheel excavator boom. They have been designed to be as lightweight and as extensively compact as possible ...

Torque: 550,000 Nm - 4,800,000 Nm
Power: 10,000 kW

These FLENDER Gear Units are designed and developed by SIEMENS to be used for sugar mills. It yields nominal torque ranging from 550 to 4,800 kNm with a power rating of up to 9,740 kW. Integrating SIEMENS'S patented ...

Torque: 98,000 Nm - 1,200,000 Nm
Power: 980 kW

... combines the high torque density of planetary gear units with the robustness and high speed operation of the helical bevel heavy-duty products. This configuration can provide great power transmission in a very compact ...

Torque: 8,990 Nm - 209,900 Nm

When high torque, robustness reliability and long operating life are required, Bonfiglioli's HDx Series is the best possible option. Thanks to high-quality materials and an optimized design, the HD Series can operate in the harshest environments, ...

Torque: 100,000 Nm - 900,000 Nm

Final Drives - Angular Input Standard features Compact structure High performance 3-7 Planetary wheels per stage Notchless ground tooth root Different ratios Integrated disc-brake High availability by highest ...

Torque: 820 Nm - 13,000 Nm
Power: 0.25 kW - 55 kW

... a wide range of situations to include drivings belts, driving grain augers, etc. Poulibloc helical geared motors are of a compact footprint to slot in seamlessly in limited spaces.

The Harmonic Gearheads incorporate two different models. The flange mount gearheads and the pinion gearheads. Both versions are built for high capacity loads and have zero backlash. The pinion version ...

Torque: 245 Nm - 4,900 Nm

... Solid shaft gearheads The solid shaft gearheads of the new RH-N series are based on our compact RV-N component sets. They feature an integrated drive pinion and a motor flange for all ...

Torque: 58 Nm - 3,136 Nm

Precise and flexible, straight from the construction kit The gearheads of the RD_-E series are more compact and versatile than ever. Three different models allow for numerous types of use, e. g. with ...

Torque: 69 Nm - 6,864 Nm
Rotational speed: 0 rpm - 250 rpm
Power: 0.3 kW - 12 kW

Compact heads for high output speed The reduction gears of the GH series are the "easy-to-use" version of the RV series. They impress with drive rates of up to 270 rpm and a shock-load capacity of up ...

Torque: 9.8 daNm - 28,254 daNm

... range of reduction ratios in a very compact space. It has three motions that permit solutions to numerous electro-mechanical drive problems. The series features Universal Differential or Reducer or Multiplier ...

Torque: 270 Nm - 10,050 Nm

... high-tech planetary reducers, KRPX allows perfect mounting on both sides of the machine frame and enables true zero backlash when coupled with an electrical preload system. Available in 3 standard universal sizes (2, ...

Torque: 0 Nm - 3,500 Nm
Rotational speed: 0 rpm - 12,000 rpm

The RAM-MSD is a two-speed gearbox engineered by Redix. It is suitable for use in in-line integration between a water cooled motor and a spindle. The unit is constructed in a compact and lightweight ...

Torque: 0.2 Nm - 15 Nm
Rotational speed: 500 rpm

The Compact worm gear reducer Model 2010 is manufactured by Ketterer. The product has compact and durable design because it is made of anodized aluminum. The steel worm ...

Torque: 2 Nm - 17 Nm

The Compact Gear is mainly designed to provide a good quality performance and functionality for very specific purposes. It is a worm gear integrated with a transmission ratio of 1:1, ...

Torque: 1 Nm - 4 Nm

The Model 4747 is designed with a plastic friction bearing, and an input, placed on the gear's side. The worm gear is designed from a die-cast housing, and may come with a bronze bearing (for special ...

Torque: 5,600 Nm

The Cat.L Series of Right-Angle Gearbox, manufactured by Rossi, is configured in a standard minimal speed shaft, oversize and hollow minimal speed shaft designed for multiple drives. This device is made in series or parallel structure, ...

Torque: 1,600 Nm - 710,000 Nm
Power: 0.18 kW - 90 kW

... Wide range of accessories and non-standard designs Modular design, with multi-optional executions Very compact size and reduced mass of gearbox Benefits Easy and functional flange, foot, or shaft-mounting ...

Torque: 0.2, 1, 1.5 Nm

Compact high torque planetary gearbox Backlash reduced version available on request Low noise version available on request For projects with a minimum demand of 25 pcs.

Torque: 0.3, 0.45, 0.6 Nm

High efficiency Ring gear and planetary gears made of specific, high grade material Planetary carriers and sun wheels made of steel Output shaft with dual sleeve bearings All stages have straight toothing

Torque: 0.4, 1.5, 4 Nm

Compact, industry compatible planetary gearbox High efficiency Ring gear, planetary carriers and sun wheels made of steel Output shaft with double ball bearings All stages have straight toothing

Torque: 28 Nm - 1,650 Nm

PSBN Precision planetary gearbox Our PSBN is the ideal combination of precision planetary gearbox and efficient bearing technology. It has been developed specifically for delivering the maximum performance ...

Torque: 22 Nm - 1,300 Nm

... Precision right angle gearbox Thanks to its spiral teeth, our WPLN achieves the optimal synchronism for the best surface qualities. By minimizing vibrations, it runs uniformly and quietly. The precision right angle planetary ...

Torque: 22 Nm - 800 Nm

WGN Precision right angle gearbox Our WGN is a hollow-shaft right angle gearbox that operates with particularly low noise levels. At the same time, the spiral teeth increase the quality of your workpiece ...

Torque: 0 Nm - 500,000 Nm

• High torque in a compact space up to 500.000Nm • Gear ratios in single stage up to i<10 • Simple assembly: plug & play • Standard units + individual solutions • Short braking angles • Optional ...

Torque: 0 Nm - 250,000 Nm

• Interface for common servomotors • High torque in a compact space up to 250.000 Nm • Gear ratios in single stavge up to i<10 • Simple assembly: plug & play • Integrated safety brake • Very low ...

Torque: 4,000 Nm - 200,000 Nm
Rotational speed: 94 rpm - 438 rpm

The planetary gears are the complete and compact solutions with a variety of types of assembly, depending on our clients needs, from 4,000 Nm to 200,000 Nm.

Torque: 12 Nm - 1,850 Nm
Rotational speed: 1,500, 2,000, 3,000, 4,000 rpm

... highly successful high precision gearbox series. All SPL gears adopt the alloy forged steel as the raw material, the powerful heat treatment, the latest helical gear design, full needle ...

Torque: 32 Nm - 608 Nm
Rotational speed: 3,000, 4,000 rpm

... highly successful high precision gearbox series. All SPLN gears adopt the alloy forged steel as the raw material, the powerful heat treatment, the latest helical gear design, full needle ...

Torque: 21 Nm - 2,050 Nm
Rotational speed: 2,000, 3,000, 4,000, 6,000 rpm

All KPX gears adopt the alloy forged steel as the raw material, the powerful heat treatment, the latest helical gear design, full needle roller bearings, and global top level gear grinding ...

Torque: 3,000 Nm - 50,000 Nm
Rotational speed: 6 rpm - 511 rpm
Power: max 400.0 kW

... for heavy applications. Designed to offer higher performance in a compact design, the A Series is featuring helical and bevel gears. The new monobloc series is based on a rigid and compact ...

Torque: 1,000 Nm - 2,500,000 Nm

... applications and sectors that request high torque within restricted area. The design of our IPR gear units not only provide high performance ratings into compact dimensions, but the large range of configuration ...

Torque: 100 Nm
Rotational speed: 3,000 rpm
Power: 1 kW

Gearbox with flange shaft output special designed for AGV (Automatic Guided Vehicles) you can insert the gearbox body to the wheel hub. can save space of your designing. perfect for AGVs for storage ...

Torque: 0 Nm - 20,000 Nm
Rotational speed: 0 rpm - 10,000 rpm

Economy planetary gearbox The PL is notably light, extremely powerful, yet suitable for complex production cycles due to its low-friction bearing design and optimized lubrication. A genuine powerhouse at an attractive, ...

Torque: 0 Nm - 20,000 Nm
Rotational speed: 0 rpm - 10,000 rpm

The WPL series compact, but powerful design, it is ideal for dynamic multiple axis systems. Our right angle gearbox features lifetime lubrication, is easy to install, all this at an unrivalled price-performance ...

Torque: 55 Nm - 6,135 Nm
Rotational speed: 0.05 rpm - 2,000 rpm
Power: 0.01 kW - 30 kW

RV-E Precison Cycloidal Gear The RV-E series precision cycloidal gear reducer provides high-end performance in a very compact and highly rigid component type configuration. ...

Torque: 0.37 Nm - 36,800 Nm
Rotational speed: 0 rpm - 400 rpm
Power: 0.25 kW - 45 kW

The VARITRON® Cycloid Drive unique cycloid gear design has advantages superior to speed reducers using common involute tooth gears. The key to VARITRON®'s Cycloid Drive matchless performance ...

Torque: 65 Nm - 12,260 Nm
Rotational speed: 0.05 rpm - 2,000 rpm

RV-C Precison Cycloidal Gear The RV- C series precision cycloidal gear reducer provides high-end performance in a very compact and highly rigid component type configuration. ...

Torque: 6 Nm - 6,050 Nm
Power: 0.12 kW - 33.2 kW

WPA Series Worm Gears Size：40~250 Ratio：10~60 Input power：0.12~33.2kW Output torque：6~6050N.m

Torque: 6 Nm - 6,050 Nm
Power: 0.12 kW - 33.2 kW

WPS Series Worm Gears Size：40~250 Ratio：10~60 Input power：0.12~33.2kW Output torque：6~6050N.m

Torque: 6 Nm - 6,050 Nm
Power: 0.12 kW - 33.2 kW

WPO Series Worm Gears Size：40~250 Ratio：10~60 Input power：0.12~33.2kW Output torque：6~6050N.m

Rotational speed: 160, 60 rpm

The N 64 V 30 spur gear is a plate gear with low gear backlash. The output shaft is case hardened and plain-bearing mounted. The drive can be supplied with a wide variety of transmission ...

The N 40 V spur gear is a plate gear with low gear backlash. The output shaft is case hardened and plain-bearing mounted. The drive can be supplied with a wide variety of transmission ...

The N 100 spur gear is a plate gear with high motor output torque, a compact design and low gear backlash. It can be supplied with a solid aluminium housing (optional). ...

Torque: 1,000 Nm
Rotational speed: 0 rpm - 6,000 rpm

These gearboxes are based on a modular system and feature a symmetrical, compact and coaxial design. Maximum reductions are possible with minimum space requirements. The gearboxes are ...

Torque: 1,400 Nm - 2,800 Nm
Rotational speed: 2,500 rpm - 8,000 rpm

The Type VP and VPC bevel gear boxes represent highly compact drive units, intended for highly dynamic applications in automation engineering. They feature drive speeds of up to 8,000 rpm and output torques ...

Torque: 18 Nm - 62 Nm
Rotational speed: 107 rpm - 190 rpm
Power: 200, 400 kW

... inertia, fast dynamic response, and high torque in order to deliver the most compact wheel drive solutions for each customer’s application. SU Drive Pack Features -Extremely compact, in-hub planetary ...