Gear train gear reducers

Aluminium Gear Units - Powerful Lightweights Modern gear units have to be robust, compact, powerful and economical - and above all they need to be light. NORD DRIVESYSTEMS offers a wide range of low ...

Torque: 15,000 Nm - 80,000 Nm
Power: 5.5 kW

... a two-stage helical bevel gear unit and a NORDAC LINK frequency inverter which is installed close to the motor. The extruder flanges can safely absorb the forces involved in the process. For the MAXXDRIVETM industrial ...

Torque: 15,000 Nm - 250,000 Nm
Power: 1.5 kW - 1,500 kW

The helical-bevel gear version of the MAXXDRIVE Industrial Gear Unit is manufactured according to the proven UNICASE principle and is available in all sizes. Various sealing options enable the industrial ...

Torque: 0.12 Nm

B16 A combination of our B16 spur gearheads with our brush DC coreless motors provides a single, factory-integrated solution for demanding, high-efficiency applications. Due to its spur compound geartrain arrangement, ...

Torque: 0.17 Nm

K24 The combination of our K24 spur gearheads with our brush DC coreless motors provides a single, factory-integrated solution for demanding, high-efficiency applications. Due to its spur compound geartrain arrangement, ...

Torque: 0.4 Nm

K27 The combination of our K27 spur gearheads with our brush DC coreless motors provides a single, factory-integrated solution for demanding, high-efficiency applications. Due to its spur compound geartrain arrangement, ...

Torque: 12 Nm - 300 Nm

Redesigned to achieve further energy savings through improved performance and efficiency, easier to use due to the case integrated with the foot and a center distance in just mm dimensions. Features Employ dedicated cases which can ...

Torque: 300 Nm - 5,300 Nm

Well-balanced in capacity, efficiency and cost while providing high precision and compactness. Foot mounting style is standard. Both solid and hollow output shaft types are available. The solid shaft type is excellent for connections ...

Torque: 300 Nm - 5,300 Nm

Uses a dedicated case for on-shaft and flange mounting with the same well-balanced worm as the EW Series, contributing to equipment simplification. In addition to a selection between solid and hollow output shafts, Power-Lock and taper ...

Rotork Gears Series IS operators are multi-turn (rotary) devices intended for the operation of gate, globe, sluice and penstock valves. These gearboxes are suitable for manual and motorised applications. ...

... ranges are available on request. Application Rotork Gears HOS/MPR series operators are multi-turn devices intended for the operation of gate, globe, sluice and penstock valves. These gearboxes can ...

... IP67 Comprehensive gear ratios with a selection of input spur gear reducers Angular contact bearings Removable and repositionable output sleeve Repositionable baseplate ...

Torque: 20 Nm - 37 Nm
Rotational speed: max 1400.0 rpm
Power: max 1.5 kW

The FRP680 helical gearbox is expressly designed to drive the linear-feeder systems in the poultry sector and provides a wide choice of fixings according to the various systems adopted. SIZES1 REDUCTION STAGES1 MAX ...

Torque: 15 Nm - 1,266 Nm
Rotational speed: 3,000 rpm - 10,000 rpm

Just like the GSB line, the GSBL line combines high performance with low backlash and high precision. Helical gears ensure a minimum noise level and smooth running. The right angle shape makes the GSBL line the perfect ...

Torque: 26 Nm - 182 Nm
Rotational speed: 4,500, 3,000, 8,000, 4,000, 7,000 rpm

The GSN economy line is the perfect match for applications where a backlash of 10 arcmin or better is required. Its helical gears ensure a minimum noise level and a smooth running. The full needle bearing allows for torques ...

Torque: 13 Nm - 1,562 Nm
Rotational speed: 3,000 rpm - 10,000 rpm

The GFE line is available in seven sizes ranging from 50 mm to 220 mm. Ground helical gears ensure a minimum noise level and smooth running. The full needle bearing allows for torques that beat the competition for units ...

Torque: 3,100 Nm - 1,400,000 Nm

The Bevel Helical Gear Unit is an optimized solutions for the task in the future. This series requires more flexibility, high quality performance and standardization when it comes to the industries of handling materials, ...

Torque: 10,500 Nm - 173,000 Nm
Power: 4,000 kW

... addition, the FLENDER gear units feature 16 different sizes, power levels of up to 3,600 kW, minimal noise levels, a vertical mounting position, two differing gear levels (a 2-, or 3-level), and many ...

Torque: 10 Nm - 69,000 Nm
Power: 1,400 kW

... collected and can be reused in power plant processes. FLENDER Gear Units are thus designed exclusively for condensing turbines in power plants. The presence of a fan mounted on two-stage helical gear ...

Torque: 21 Nm - 200 Nm

Parallel shaft Gearmotors Helical Single-Stage The S Series design makes this gearmotor particularly effective for pump, fan and blower applications. To meet the needs of customers in these sectors, ...

Torque: 5,000 Nm - 63,250 Nm
Power: 5 kW - 1,090 kW

Parallel shaftgearmotors and geared units Helical Parallel Shaft Heavy Duty Gear Units When high torque, robustness reliability and long operating life are required, Bonfiglioli's HDx Series is the best possible option. ...

Torque: 98,000 Nm - 1,200,000 Nm
Power: 980 kW

Bonfiglioli 3/H Series combines the high torque density of planetary gear units with the robustness and high speed operation of the helical bevel heavy-duty products. This configuration can provide great power transmission ...

Torque: 820 Nm - 13,000 Nm
Power: 0.25 kW - 55 kW

Poulibloc are helical geared motors that feature parallel output and are suitable for normal environments. They exemplify dual lipseals on treated ground surface and boast the precision and rigidity of ribbed cast iron frames. Furthermore, ...

Torque: 100 Nm - 10,000 Nm
Power: 0.25 kW - 55 kW

These hollow shaft geared motors with taper bush are designed to operate in potentially explosive dust atmospheres (ATEX zone 21 certified). These geared motors use a shaft mounting that is adaptable to all environments and a ribbed cast ...

Torque: 100 Nm - 10,000 Nm
Power: 0.25 kW - 55 kW

The Poulibloc ATEX zone 22 is designed specifically for use in environments with potentially explosive dust. The model is a hollow shaft geared motor with a tapered bush system, that may be mounted in various areas. Its ribbed cast ...

Torque: 199 Nm - 976 Nm
Rotational speed: 540 rpm
Power: 11 kW - 55 kW

Rotational speed: 1,500 rpm - 3,000 rpm
Power: 10 kW - 90 kW

Torque: 0 Nm - 162,000 Nm
Power: 0 kW - 1,860 kW

Series G gear units are available in parallel shaft helical units and right angle shaft bevel/helical units in double, triple and quadruple reduction gear stages having a maximum output torque of up to ...

Torque: 0 Nm - 117,000 Nm
Power: 0 kW - 8,300 kW

... industrial gearboxes feature a very modular design and construction and provide excellent performance and engineering advantages. They are available in right angle and in-line versions with single, double, triple and ...

Torque: 0 Nm - 57,800 Nm

This Series J Sala is a user-friendly device that is very ideal when the uptime is critical. Mounting and dismounting are now very easy to do through the use of patented Kibo system. It is also hassle-free to service on infrequent occasions. When ...

Torque: 5,600 Nm

jbj Techniques 'AM' splitter gearboxes (or multiple PTO) are available in a number of mounting formats with various increasing and decreasing ratios. Splitter gearboxes / multiple power take-off units Maximum ...

Torque: 1.9 Nm - 1,882 Nm
Rotational speed: 0.3 rpm - 373.3 rpm
Power: 0.09 kW - 15 kW

... Additionally, it is provided with a synthetic oil for the entire lifespan without any maintenance. Similar to all the linkable gear containers and motors produced by Motive, the STADIO can be positioned at any locations ...

Torque: 49 Nm - 4,643 Nm
Rotational speed: 651 rpm - 1,420 rpm
Power: 0.13 kW - 30 kW

... service factor of a helical gearbox are centrally affected by the centers distance of the last phase, Robus delivers comprehensive levels of durability. Single-stage ratios between 2 and 6, together with appropriate ...

Torque: 30.23 Nm - 298.98 Nm
Rotational speed: 650 rpm - 2,887 rpm
Power: 0.13 kW - 5.5 kW

STON is the new parallel shaft and shaft mounted gearbox. In cast-iron monolithic body. 3 sizes, with a capacity of up to 700Nm. MADE IN ITALY

Torque: 450,000 Nm

... is a helical and bevel helical gear reducer which is specifically engineered to provide reliability in heavy application conditions. It is built with a universal mounting design and requires minimal maintenance. ...

Torque: 1,000,000 Nm

Helical & bevel helical gear units are the right choice for heavy industry.With solid output shaft,backstop device,swing base and pony drives, these units provide a wide solution range. They feature a hollow output shaft ...

Torque: 132,000 Nm
Power: 0 kW - 1,710 kW

... Helical and Bevel Helical Gear Units for Extruders exhibit universal mounting capabilities, standard minimal-speed shafts manufactured out of steel materials, and modifiable screw shank holes. They feature integrated ...

Torque: 2, 160 Nm

Industry compatible high performance planetary gearbox Protection class IP 65 standard (excluding output shaft) High efficiency Output shaft with double ball bearings

Torque: 2, 160 Nm

... compatible high performance planetary gearbox High efficiency Quiet operation due to helical gears in 1st stage, 2nd and 3rd stage have straight toothing Planetary carriers and sun wheels made of steel, ...

Torque: 0 Nm - 350 Nm
Rotational speed: 1,000 rpm
Power: 0 kW - 63 kW

Special gear up box for simultaneously running three hydraulic pumps.

Torque: 0 Nm - 940 Nm
Power: 0 kW - 97 kW

High power vertical gear up box, bottom input-upper output. Different internal ratios are available.

Torque: 3,000 Nm - 50,000 Nm
Rotational speed: 6 rpm - 511 rpm
Power: max 400.0 kW

... heavy applications. Designed to offer higher performance in a compact design, the A Series is featuring helical and bevel gears. The new monobloc series is based on a rigid and compact housing to fit on a maximum of ...

Torque: 3,000 Nm - 36,000 Nm
Rotational speed: 6 rpm - 511 rpm
Power: max 400.0 kW

... heavy applications. Designed to offer higher performance in a compact design, the A Series is featuring helical and bevel gears. The new monobloc series is based on a rigid and compact housing to fit on a maximum of ...

Torque: 930 Nm - 7,530 Nm
Power: 2.2 kW - 160 kW

The shaft mounted gear series ( IRO ) are the best solutions for quarries and mining sectors. The backstop feature of the gearboxes allow you to load heavy charges on your inclined conveyors or applications. ...

Torque: 2.4 Nm - 62,800 Nm

JRTR Series Helical Gear Reducers Size：17~187 Ratio：3.37~289.74 Input power：0.12~250 kW Output torque：2.4~55435 N.m JRTF Series Parallel Shaft-Helical Gear Reducers Size：37~177 Ratio：3.77~281.71 Input ...

Torque: 6,100 Nm - 900,000 Nm
Power: 4.3 kW - 5,082 kW

JRHH Series Parallel Shaft Gear Units Size：3~28 Ratio：1.25~450 Input power：4.3~10515kW Output torque：2300~1400000N.m

Torque: 6,100 Nm - 900,000 Nm
Power: 2.8 kW - 2,879 kW

JRHB Series Helical-Bevel Gear Units Size：4~28 Ratio：5~400 Input power：2.8~4908kW Output torque：5500~1400000N.m

Torque: 32 Nm - 1,850 Nm
Rotational speed: 1,500, 2,000, 3,000, 4,000 rpm

... highly successful high precision gearbox series. All SVX gears adopt the alloy forged steel as the raw material, the powerful heat treatment, the latest helical gear design, full needle ...

Torque: 42 Nm - 2,050 Nm
Rotational speed: 1,500, 3,000 rpm

All KVX gears adopt the alloy forged steel as the raw material, the powerful heat treatment, the latest helical gear design, full needle roller bearings, and global top level gear grinding ...

Torque: 2.5, 6.5, 10, 15 Nm
Rotational speed: 0 rpm - 4,500 rpm

General: Multi-stage, closed spur gear for use in combination with our motors. Single gear with ball-bearing ingoing shaft (2 bearings back-to-back). Lifetime grease lubrication Housing: Zinc diecast ...

Torque: 0.35, 1.4, 2.8, 4 Nm
Rotational speed: 0 rpm - 4,500 rpm

General: Multi-stage, closed spur gear for use in combination with our motors. Single gear with ball-bearing ingoing shaft (2 bearings back-to-back). Lifetime grease lubrication Housing: Zinc-diecast ...

Torque: 1, 2, 3, 3.3 Nm
Rotational speed: 0 rpm - 5,000 rpm

General: Multi-stage, closed spur gear for use in combination with our motors. Single gear with ball-bearing ingoing shaft (2 bearings back-to-back). Lifetime grease lubrication Housing: Zinc diecast, ...

Torque: 40 Nm
Rotational speed: 3,000 rpm

... torques and a broad transmission range, this series of cylindrical gear units is a cost-effective alternative to planetary gear trains. The gearboxes are high-efficiency, ...

Torque: 1,000 Nm
Rotational speed: 0 rpm - 6,000 rpm

These gearboxes are based on a modular system and feature a symmetrical, compact and coaxial design. Maximum reductions are possible with minimum space requirements. The gearboxes are permanently lubricated ...

Torque: 142 Nm - 5,713 Nm
Rotational speed: 10 rpm - 1,450 rpm

... Angle Bevel Gearbox RN series RN-Series bevel gearbox, named spiral bevel gear box, right angles change transmission directions and power, efficiency up to 95%. Gear ratio 1:1, 2:1 ...

Torque: 11.6 Nm - 1,833.5 Nm

... European Standard Bevel Gearbox RNV series RNV-Series bevel gearbox, named spiral bevel gear cubic gearbox, right angles change transmission directions and power, efficiency up to 95%. 6 surfaces of ...

Torque: 96 Nm - 132 Nm
Rotational speed: 10 rpm - 1,450 rpm
Power: 0.14 kW - 14.9 kW

Spiral Bevel Gear Reducer Detailed Information: 1. Model: NOSEN 6M 2. Gearing Type: Spiral Bevel Gear 3. Gear Ratio: 1:1, 1.5:1, 2:1, 3:1, 4:1, 5:1 4. Efficiency: 95% 5. ...

Power: 0.8 kW - 8,000 kW

... Drives. Gearbox casing can be offered in Gray Cast Iron (FG260) and MS Fabricated configuration. MS Fabircated casing will be duly stress relieved and shot blasted. Gears and Pinions are hardened and ...

... Crane Duty Gearbox Stage Double/ Triple/ Quadruple Drives Main Hoist/ Cross Travel/ Long Travel Reduction Ration 1.6/1 - 300/1 Mounting Horizontal/ Verticle Lubrication Forced Lubrication for all Verticle ...

Power: 5 kW - 530 kW

Helical Single Screw Extruder Gearbox Power Range 5 KW to 530 KW Ratio Range 6.3/1 upto 80/1 Stage Single Double & Triple Screw Size Range 40mm to 150mm

PC +NMRV Helical/Worm Gear Reducers The Helical Gear PC construction is modular and therefore it can be supplied as separate unit to be mounted on NMRV Worm Gear reducer ...

Torque: 17 Nm - 1,330 Nm
Rotational speed: 0 rpm - 600 rpm
Power: 0.08 kW - 3.7 kW

GH Series Helical Inline Geared Motors Foot Mount Varitron GH Helical Gear Inline Geared Motors Foot Mount with High Quality alloy steel machined and carbonized with precision tooth profile.

Power: 100 W - 3,700 W

GHD Helical Geared Speed Reducer Foot Mount Varitron GHD Helical Gear Inline speed reducers with shaft input. Foot Mount Design with High Quality alloy steel gears machined ...

Rotational speed: 160, 60 rpm

The N 64 V 30 spur gear is a plate gear with low gear backlash. The output shaft is case hardened and plain-bearing mounted. The drive can be supplied with a wide variety of transmission ...

The N 100 spur gear is a plate gear with high motor output torque, a compact design and low gear backlash. It can be supplied with a solid aluminium housing (optional). The output shaft ...