|
|
| For over 60 years, Globe Motors has provided reliable turnkey solutions for automotive, aerospace, defense, medical and industrial motion control applications. From "downhole" mining applications to outerspace, Globe Motors products can be found in virtually all industries. |
|
Lenze DC shunt-wound motors can be ideally matched to specific machine tasks because they enable you to select precisely the right degree of protection, type of winding, type of construction and the appropriate built-on accessories.
MGFQ shunt motor
High power density as a result of the square design and internal cooling, IP 23S degree of protection, standard dimensions for gearbox mounting, additional modular built-on accessories. Power ratings from 0.33 to 90.8 kW.
more >>
MGFRK shunt motor
IP 54 degree of protection, fully compensated, IEC standard housing, sizes 90 to 160, variable additional modular built-on accessories. Power range 0.33 to 27 kW.
more >>
Permanent magnet motor 13.120
High power density smooth-bodied design and naturally ventilated, enclosure IP 54, standard measures for gearbox mounting, additional built-on accessories in modular system, powers from 0.055 to 0.6 kW.
|
|
Including:
PM36 Custom permanent magnet motors up to 75 watts
PM45 Custom permanent magnet motors up to 250 watts.
PM55 Custom permanent magnet motors up to 300 watts.
PM62 Custom permanent magnet motors up to 500 watts. |
|
| The DC-motors can be combined with control electronics, gearboxes, brakes and encoders in a modular system to provide a flexible, adaptable, market-oriented solution. |
|
The Dunkermotoren GR/G range (commutated DC motors) are notable for:
Longer life than commutated motors from other manufacturers
Low detent torques
High efficiency
High dynamic acceleration
Good regulation characteristics
High power density
Maintenance-free
Robust design
Low moment of inertia
Motor insulation class E
Winding insulation class F
Extremely high short time overload capacity of the motor
Surface protection
Minimum interference radiation, optional interference versions
Protection up to IP 65
High quality due to fully automated production lines
|
|
The RDxx is a complete positioning unit which integrates a DC gear-motor, a drive, an encoder and a controller. Profibus, CANopen and RS485 interface are available.
The Rotadrive is capable to move axis to target positions by means of ramps and with backlash compensation.
Thanks to its small dimensions (58x125x105 mm) RDxx can be mounted directly on spindle with Ø14mm and fixed by means of the collar and the anti-rotation pin.
Typical applications of this product is on tool-changers, gauges and packaging machinery. |
|
Coreless rotor means no cogging or preferred rotor position
No iron losses
Extremely low current consumption
Low starting voltage
Low rotor inertia for extremely fast acceleration and braking
Extremely light and compact
Smooth and accurate speed, position, and torque control
Custom systems available from design to production
Higher power to volume than other DC motor technologies
High precision gearboxes available in all sizes
Feedback components available in all sizes
Control electronics available for all motor series
|
|
DC motors with ironless rotor
- Ø 6 - 75 mm
- 0.3 - 250 watts
- RE-, S-, A- and F-Program
Characteristics
- Mechanical commutation (graphite or precious metal brushes)
- NdFeB, AlNiCo and Ferrite magnets
- Highest efficiency
- Low inductance
- No magnetic cogging
- High acceleration thanks to a low mass inertia
- Low electromagnetic interference
- Linear characteristics
|
|
Flat motors for tight spaces.
- Brushless DC motors with flat design
- Ø 6, 10, 14, 20, 32, 45, 90 mm
- 0.03 - 90 watts
Characteristics
- Ultra flat and simple design
- Cost effective
- Unsurpassed service life
- Relatively high inertia
- High speed also with low voltages
- Low detent (winding with iron core)
- Block commutation with and without Hall sensors
- Integrated electronics available
- Can be combined with maxon gears
Applications
barcode scanners, robotics, air samplers, conveyors etc.
|
|
| The megatorque motor ps series delivers unprecedented performance , including a maximum rotational speed of 10 and position sensor |
|
HEINZMANN offers compact drives integrated into the wheel hub and complete drive systems for use in light electric vehicles.
The RN Series comprises a brush-type disk motor integrated into the wheel hub and a transmission, with or without integrated freewheel. The motors feature axle ends on both sides, and are designed to be mounted on a fork bracket. They are characterized by their extremely low weight and are used for bicycles, scooters, three-wheelers, rickshaws and various goods transportation vehicles.
|
|
Brushless permanent magnet motors from Iskra Avtoelektrika combine high performance and high reliability with a simple and therefore the best price-performance motor design. The motors offer high efficiency over a wide speed range and high torque at low speeds.
The motor construction with no commutator and brushes, no slots and windings on the rotor provides very low acoustic noise and torque-ripple.
With the addition of an efficient electronic controller already incorporated in the motor construction, the motor and electronics represent a single compact drive unit, and this type of motor becomes acceptable for many applications.
|
|
| Baldor's Explosion-proof motors are ideal for a wide variety of applications where hazardous fumes or dust may be present. The motors are available in three phase and single phase with ratings, in stock, from 1/4 HP through 300 HP. Designs available include standard foot mounted, C face with base and C face less base, 60 Hz and 50 Hz, Jet Pump motors, and Inverter Drive motors. |
|
Our explosion-proof D.C. motors, serie "S", were designed according to European standards' CENELEC and are manufactured in order to offer the maximum of safety and reliability for all services in explosive atmospheres.
Our motors were certified for the following gas explosive atmospheres:
*S71 range: Group IIB+H2 (T4 or T5) - 2G Category - Zone 1
*S80 to S160 range: Group IIB (T4 or T5) - 2G Category - Zone 1
Our motors are certified for the classes of temperature of surface: T4 (135°C) T5 (100°C)
Our "S" type motors are conceived with compensated poles:
*2 or 4 (except S 71 type: 2 salient poles)
*Available shaft heights are as follow: 71, 80, 90, 100, 112, 132, 160
*Protection: up to IP 55 (except S 71 range: IP 44)
*Cooling: IC 0141 · Frame and flanges in cast iron (except S 71 range: Aluminium)
*ventilator in aluminium
*ventilator cap in cast iron (except S71range : Aluminium)
*Terminal box in cast iron (except S 71range: Aluminium)
*Life lubricated bearings: life expectancy is a function of the shaft load and the speed
*Shaft in "XC 48" steel
*Insulation and components: F Class minimum
For motor form IM 3011 (V1): Dome of protection |
|
Johnson Motor High Voltage DC (HVDC) motors
Dimensions: Ø 35.8 x 57, shaft Ø 3.175 mm
Supply nominal: 120 VDC
Torque:
@ rated load 20 mNm
@ max. efficiency 20.9 mNm
@ max. power 37.37 mNm
Speed:
@ 60 Hz no load 7200 rpm
@ 60 Hz rated load 4700 rpm
@ 60 Hz max. efficiency 4600 rpm
@ 60 Hz max. power 3200 rpm
Power:
input @ rated load 25.0 W
input @ max. efficiency 25.4 W
output @ rated load 10 W
output @ max. power 12.56 W
Max. current:
@ no load 0.09 A
@ rated load 0.210 A
@ max. efficiency 0.22 A
@ max. power 0.31 A
|
|
GE CD6000 Large DC:
GE Industrial Systems has been designing and building DC machines for over 100 years. We can offer new designs and rerates up to 12,000 HP.
Features and Benefits:
- Class F or H insulation polyimide films.
- Split magnet frame for easy maintenance
- Best In Class Test facility with Back to Back testing capabilities.
- ISO 9001 - 1994 Approved Supplierons
Applications:
- Mining
- Marine Generation and Propulsion
- Metals |
|
The Dunkermotoren GR/G range (commutated DC motors) are notable for:
Longer life than commutated motors from other manufacturers
Low detent torques
High efficiency
High dynamic acceleration
Good regulation characteristics
High power density
Maintenance-free
Robust design
Low moment of inertia
Motor insulation class E
Winding insulation class F
Extremely high short time overload capacity of the motor
Surface protection
Minimum interference radiation, optional interference versions
Protection up to IP 65
High quality due to fully automated production lines
The DC-motors can be combined with control electronics, gearboxes, brakes and encoders in a modular system to provide a flexible, adaptable, market-oriented solution.
|
|
24A Series Permanent Magnet DC Motor
Horsepower: 1/50 to 1/7 HP
Rated Torque: 8 to 24 oz-in
Speed: 2500 to 11,500 RPM
33A Series Permanent Magnet DC Motor
Horsepower: 1/16 to 1/3 HP
Rated Torque: 34 to 134 oz-in
Speed: 2500 RPM
33A Series Metric Permanent Magnet DC Motor
Motor Watts: 42 to 244 W
Rated Torque: .24 to .86 Nm
Speed: 1725 to 3000 RPM
42A Series Permanent Magnet DC Motor
Horsepower: 1/4 to 1/2 HP
Rated Torque: 101 to 180 oz-in
Speed: 2500 RPM |
|
|
|
Direct current electric motors
